PDF User Manual

  1. Home
  2. Manuals
  3. Levana Lila Manual

Levana Lila Manual

Made by: Levana
Type: Manual
Category: Baby Monitor
Pages: 20
Size: 0.47 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

mylevana.com

Manual / Manuel / Manual

Digital Baby Video Monitor

CAUTION: Keep small parts away from children.
ATTENTION: Gardez les petites pièces hors de la portée des enfants.
PRECAUCIÓN: Mantenga las piezas pequeñas fuera del alcance de los niños.

Moniteur vidéo bébé numérique

Video Monitor Digital para Bebé

 

Lila

30000_31000_32000_LILA E_F_S.indd   1

07/01/2013   4:37:33 PM

 


background image

SAFETY INSTRUCTIONS

 

 

CAUTION: Keep small parts away from children.

 

 Strangulation 

Hazard:

 Children can become entangled in cords. Power cords 

should be kept more than 3 feet away from the crib and baby’s reach at all 
times. Baby monitors and cameras with power cords should never be hung on 
or near the crib.

 

 

 

 

This product is not a toy and should be kept out of children’s reach.

 

 

 

 

This product contains small parts. Exercise care when unpacking and 
assembling the product.

 

 

 

 

Read and Keep Instructions:

 All the safety and operating instructions should be 

read before the video baby monitor is operated.

 

 

This product cannot replace responsible adult supervision.

Water and Moisture: 

This product is designed for indoor use only. The unit should not 

be exposed to rain, moisture, dripping or splashing. No objects filled with liquid should 
be placed on top of, or beside the product, such as a glass or vase.  This item should 
not be used near water.

Non-Use Periods:

 Always unplug the AC adapters from the wall outlets during long 

periods of non-use.

Ventilation:

 This baby monitor should not be used on a bed, sofa, rug or similar surface 

that may block the ventilation openings, or be placed in an enclosed area, such as a 
bookcase or drawer that may impede air flow.

Keep Away from Sources of Heat:

 This unit should not be exposed to direct heat 

sources such as a candle, fireplace, radiator, heat register, stove or other appliance that 
emits heat. The unit should not be left in direct sunlight.

Power Source:

 This unit should only be used with the AC power adapters included in 

this package (rated 6V 800mA)

Damage Requiring Service:

 This unit should be serviced by qualified personnel  

only when:

a. 

Objects have fallen or liquid has been spilled into the product

b.  The units have been exposed to rain
c. 

The units do not appear to operate normally or exhibits a distinct change in 
performance

d.  The units have been dropped or the enclosure damaged

2

mylevana.com

30000_31000_32000_LILA E_F_S.indd   2

07/01/2013   4:37:33 PM

 


background image

This device complies with part 15 of the FCC Rules. Operation is 
subject to the following two conditions:

(1) 

 

This device may not cause harmful interference.

(2) 

 

This device must accept any interference received, including 

interference that may cause undesired operation.   

FCC WARNING

IC STATEMENT:

The manufacturer is not responsible for any radio or TV interference caused by 

unauthorized modifications to this equipment. Such modifications could void the 

user’s authority to operate the equipment.

FCC STATEMENT

3

mylevana.com

30000_31000_32000_LILA E_F_S.indd   3

07/01/2013   4:37:33 PM

Any Changes or modifications not expressly approved by the party responsible 

for compliance could void the users  authority to operate the equipment

IMPORTANT NOTE:  

FCC Radiation Exposure Statement:  

This equipment complies with FCC /IC radiation exposure limits set forth for

This transmitter must not be co-located or operating in conjunction 

 an uncontrolled environment .This equipment should be installed and  

operated with minimum distance 20cm between the radiator& your body. 

with any other antenna or transmitter.

This device complies with Industry Canada licence-exempt RSS standard(s).

 (1) this device may not cause interference, and

 (2) this device must accept any interference, including interference that may cause 

 Operation is subject to the following two conditions:

undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using 

an antenna of a type and maximum (or lesser) gain approved for the transmitter 

by Industry Canada. To reduce potential radio interference to other users, the 

antenna type and its gain should be so chosen that the equivalent isotropically 

radiated power (e.i.r.p.) is not more than that necessary for successful communication

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. 

L'exploitation est autorisée aux deux conditions suivantes: 
(1) l'appareil ne doit pas produire de brouillage, et 
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible 

d'en compromettre le fonctionnement.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner 

avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. 

Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, 
il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) 
ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.

 


background image

We take quality very seriously. That is why all of our products come with a  

 

one-year warranty from the original purchase date against defects in workmanship 
and materials. If you have warranty or support issues, please contact us using any of 
the following methods:

Web:

  www.mylevana.com 

Support: 

www.mylevana.com/support

          

 

LEVANA Canada                

LEVANA USA

 

4080 Montrose Road        

60 Industrial Parkway #Z64

        

Niagara Falls, ON 

Cheektowaga NY 

 

Canada L2H 1J9 

USA 14227

Warranty Terms

1. LEVANA

®

 products are guaranteed for a period of one year from the date of 

purchase against defects in workmanship and materials. This warranty is limited to 
the repair,  replacement or refund of the purchase price at LEVANA’s option. 

2. 

This warranty becomes void if the product shows evidence of having been 
misused, mishandled or tampered with contrary to the applicable instruction 
manual. 

3. 

Routine cleaning, normal cosmetic and mechanical wear and tear are not covered 
under the terms of this warranty. 

4. 

The warranty expressly provided for herein is the sole warranty provided in 
connection with the product itself and no other  warranty,  expressed or implied is 
provided. LEVANA assumes no responsibilities for any other claims not specifically 
mentioned in this warranty. 

5. 

This warranty does not cover the shipping cost, insurance or any other  

 

incidental charges. 

6. 

You MUST contact LEVANA at 

www.mylevana.com/support

 before sending 

any product back for repair. You will be sent a Return Authorization form with 
return instructions. When returning the product for warranty service, please pack 
it carefully in the original box with all supplied accessories, and enclose your 
original receipt or copy, and a brief explanation of the problem (include RA #). 

7. 

This warranty is valid only in Canada and the continental U.S.

8.  This warranty cannot be re-issued.

a.com

Please visit our website at www.mylevana.com for 

information about your product’s warranty.

4

mylevana.com

30000_31000_32000_LILA E_F_S.indd   4

07/01/2013   4:37:33 PM

 


background image

 

TABLE OF CONTENTS

SAFETY INSTRUCTIONS ...............................................................................................................2
FCC STATEMENT ............................................................................................................................3
WARRANTY .....................................................................................................................................4
WHAT’S INCLUDED .......................................................................................................................6
BUTTONS AND CONNECTIONS - MONITOR .......................................................................... 7
BUTTONS AND CONNECTIONS - CAMERA .............................................................................8
SETUP ...............................................................................................................................................9

Battery installation .........................................................................................................9
Get the Most Out of Your Rechargeable Battery .....................................................9
Connecting Power to the Monitor / Charging Battery .........................................10
Connecting Power to the Camera ...........................................................................10
Screen Icons ................................................................................................................. 11

OPERATION ..................................................................................................................................12

Turn on the Monitor ....................................................................................................12
Pairing the Cameras & Monitor .................................................................................12
Placement of the Monitor ..........................................................................................13
Placement of the Camera ..........................................................................................13
Mounting the Camera on a Tabletop Safely ...........................................................13
Mounting the Camera on a Wall Safely ...................................................................14
Night Vision ...................................................................................................................15
Adjusting the Camera Angle ......................................................................................15

MONITOR ......................................................................................................................................16

Volume ...........................................................................................................................16
Using the Talk to Baby™ Two-Way Intercom .........................................................16
Using Power Save ........................................................................................................ 17
Selecting a different camera view ............................................................................ 17
Setting the Brightness .................................................................................................18
Contacting Customer Support ..................................................................................18

TROUBLESHOOTING ..................................................................................................................19
MAINTENANCE ............................................................................................................................19

5

mylevana.com

30000_31000_32000_LILA E_F_S.indd   5

07/01/2013   4:37:33 PM

 


background image

Ŕ

/JHIU7JTJPO$BNFSB

Ŕ

#BCZ7JEFP.POJUPS

Ŕ

3FDIBSHFBCMF#BUUFSZ

Ŕ

1PXFS"EBQUFST

Ŕ

*OTUSVDUJPO.BOVBM

Ŕ

:FBS8BSSBOUZ

Ŕ

-JGFUJNF-JWF$VTUPNFS4VQQPSU

This product is not a toy.

This product contains small parts. Exercise care when unpacking and assembling the product.

This product does not replace responsible adult supervision. Check on your child at regular 
intervals and make sure your monitor is always adequately charged.

LEVANA

®

 does not endorse any LEVANA

®

 products for illegal activities. Levana is not responsible 

or liable in any way for any damage, vandalism, theft or any other action that may occur while a 
LEVANA

®

 product is in use by the purchaser.

We reserve the right to change models, configuration, or specifications without notice or liability. 
Product may not be exactly as shown.

©2012 LEVANA

®

. All rights reserved. LEVANA

®

, the LEVANA

®

 logo, Lila

 and other LEVANA

®

 marks 

may be registered. All other Trademarks are the property of their respective owners.

WHAT’S INCLUDED

6

mylevana.com

30000_31000_32000_LILA E_F_S.indd   6

07/01/2013   4:37:35 PM

 


background image

1

2

3

5

4

6

8

7

10

9

11

13

12

1. 

LED SOUND BAR  

LED lights show different levels 
of sound

2.  LCD SCREEN

3. 

POWER / VIDEO ON-OFF BUTTON

4.  VOLUME DOWN / MOVE LEFT 

BUTTON

5.  TALK TO BABY™ BUTTON

 

Press and hold to talk, release  
to listen

6.  MENU / SELECT BUTTON

7. 

MICROPHONE

8.  VOLUME UP / MOVE RIGHT 

BUTTON 

9. 

ANTENNA 

Extend to improve signal

10.  SPEAKER

11.  REMOVEABLE STAND CLIP

12.  TABLE STAND

13.  BATTERY COMPARTMENT

MONITOR

7

mylevana.com

30000_31000_32000_LILA E_F_S.indd   7

07/01/2013   4:37:37 PM

 


background image

1. 

MICROPHONE

2.  POWER ON/OFF BUTTON

3. 

PAIRING BUTTON

4.  INVISIBLE NIGHT VISION LEDs

5.  CAMERA

6.  LIGHT SENSOR 

7. 

POWER LED

8.  SPEAKER 

9. 

POWER INPUT

7

6

9

8

1
2

4

3

5

CAMERA

8

mylevana.com

30000_31000_32000_LILA E_F_S.indd   8

07/01/2013   4:37:39 PM

 


background image

LET’S GET STARTED!

Battery Installation

1. 

Gently remove the STAND CLIP on the back of 
the monitor to allow access to the BATTERY 
COMPARTMENT COVER. 

2. 

Slide the BATTERY COMPARTMENT COVER down 
to remove.

3. 

Insert the battery with the words  

"

Rechargeable 

Battery

"

 facing towards you. The battery 

connectors should line up with the connectors 
inside the battery compartment.

4. 

Slide the BATTERY COMPARTMENT COVER back into place and reinstall the  
STAND CLIP.

Get the Most Out of Your Rechargeable Battery

Ŕ

Fully charge battery (4 hours) before first use.

Ŕ

To maximize battery life, charge battery before battery is fully drained.

Ŕ

Avoid extreme heat or cold as this will affect the life of the battery.

Ŕ

Turn LCD screen OFF; press POWER 

button on the front of the monitor ONCE.

Ŕ

Lila

 menu settings that increase battery life:

 

Power Save Mode

: After 1 minute of inactivity, monitor enters   

 

 

standby/sleep mode.

 Adjustable 

Brightness

: Decreasing screen brightness will extend battery life.

6. 

For extended periods of non-use, please remove battery from baby monitor.

SETUP

Battery 

connectors

s

9

mylevana.com

30000_31000_32000_LILA E_F_S.indd   9

07/01/2013   4:37:40 PM

 


background image

Note: Baby monitors and cameras with power cords should never be hung on or near the 
crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away 
from the crib and the baby’s reach at all times.

Connecting Power to the Monitor / Charging Battery

1. 

Connect the small end of power adapter marked 
MONITOR   into the DC input on the side of the 
monitor as shown in the diagram. 

2. 

Connect the other end of the adapter into an available 
wall outlet. For safety reasons, ONLY use the adapters 
included in the package.

3. Press 

the 

POWER / VIDEO ON-OFF BUTTON

4. 

The icon in the top right corner of the main screen will 
show you the 

battery power status

.

EMPTY   

 

          CHARGING   FULL

Connecting Power to the Camera

1. 

Connect the small end of the power 
adapter marked CAMERA 

  into the DC 

input on the back of the camera base as 
shown in the diagram. For safety reasons,  
ONLY use the adapters included in the 
package.  

2. 

On the side of the camera, slide the 
POWER switch 

   UP to the ON 

position. The 

POWER LED 

will light up.

DC Input

put

,  

ON / OFF

Switch

DC Input

Power LED

SETUP

10

mylevana.com

30000_31000_32000_LILA E_F_S.indd   10

07/01/2013   4:37:43 PM

 


background image

ut

SIGNAL STRENGTH

   

NO  

 

           STRONG

SIGNAL   

            SIGNAL

BATTERY STRENGTH

EMPTY 

 

 

          CHARGING   FULL

VOLUME

  

    

OFF 

    

 

 

LOUD

TALK TO BABY™            

POWER SAVE

 ON   

 OFF

BRIGHTNESS

DARK 

 

 

         BRIGHT

CAMERA

 

NO        CAM       CAM        CAM       CAM        SEQ

CAM  

 1 

3           4          MODE

PAIRING

PAIRING      CAM        CAM        CAM        CAM 
                         1 

      2 

      3              4        

SCREEN ICONS

SUPPORT         

         EXIT

11

mylevana.com

30000_31000_32000_LILA E_F_S.indd   11

07/01/2013   4:37:44 PM

 


background image

Turn on the MONITOR

Press and hold 

the POWER 

button on the front of the monitor.

Pairing the Camera(s) and Monitor

The camera and monitor come paired (connected) to each other automatically.  However, 
if upon opening this package the devices do not automatically connect and transmit, you 
may do so manually.

1. 

To pair your camera and monitor, press the MENU 

 button.  Using the  

navigational arrows 

+

 on the front of the monitor, highlight the PAIRING icon 

and press the MENU 

 button once to select.

2. 

Use the navigational arrows 

+

 to select the

icon.

3. 

Press MENU 

.  When you see 

 flashing next to camera

icon, quickly press 

and hold the PAIRING 

 button on the side of the camera. A checkmark 

 will 

appear next to camera 

confirming pairing is successful. Video/audio will be 

transmitted automatically. 

4. 

To pair additional cameras, repeat steps 1 to 3 and be sure to select camera number 

 or 

 in the Pairing menu when pairing each additional camera.  

Note:   Before you begin pairing, be sure to have the monitor and the camera(s) 

side by side. 

ICONS ARE ORANGE 
WHEN SELECTED

OPERATION

12

mylevana.com

30000_31000_32000_LILA E_F_S.indd   12

07/01/2013   4:37:45 PM

 


background image

r, 

ou 

er 

Placement of the Monitor

This monitor can be placed on a tabletop.

Ŕ

You can place the monitor on a tabletop by using the retractable table 
stand on the back of the monitor. When not in use, simply tuck the 
table stand away into the back of the monitor until you hear a 

"

click

"

.

Placement of the Camera

This camera can be placed on a tabletop or hung on the wall above the 
area being monitored. 

Ŕ

Place the camera within 15 feet of the area being monitored for best picture 
results. 

Ŕ

Do not place objects within 2 feet of the field of vision of the camera as the 
night vision will not activate correctly if objects are too close.

Mounting the Camera on a Tabletop Safely:

1. 

Place the camera on a tabletop no less than 3 feet away from your baby’s crib.

2. 

Feed the power cord down the back of the table or use wall clips (not included) 
to secure the cord away so the baby cannot reach it.

3.  Plug in the power cord, check the monitor to ensure that you are getting a 

good view of your child and there are no obstructions.

Note: Baby monitors and cameras with power cords should never be hung on or 
near the crib as it is a strangulation hazard. Power cords should be kept no less 
than 3 feet away from the crib and the baby’s reach at all times.

OPERATION

3

 ft

13

mylevana.com

30000_31000_32000_LILA E_F_S.indd   13

07/01/2013   4:37:47 PM

 


background image

Mounting the Camera on a Wall Safely:

Before drilling the holes, it is important to check the reception and camera positioning 
in the intended location on the wall. Ensure you are hanging the camera no less than 3 
feet away from baby’s crib.

1. 

Pre-drill two holes in the wall using a 3/16”, 4.8mm drill bit.

2. 

Insert wall anchors (not included) into each hole and tap gently with a hammer 
until the anchor is flush with the wall.

3. 

Insert a screw (not included) into each wall anchor and tighten until the screws 
only stick out about a 1/2 inch.

4. 

Plug the power cord into the power input of the camera.

5. 

Locate the wall mounting holes on the bottom of  
the camera base.

6. 

Slide the holes over the screws sticking out of 
the wall.

7. 

Confirm that the camera is secure, if it is loose 
you may have to tighten the screws more.

8.  Use wall clips (not included) to secure the power 

cord away from the crib or the baby’s reach. 

9. 

Connect the other end of the adapter into an 
available wall outlet.

OPERATION

Note: Baby monitors and cameras with power cords should never be hung on or 
near the crib as it is a strangulation hazard. Power cords should be kept no less 
than 3 feet away from the crib and the baby’s reach at all times.

14

mylevana.com

30000_31000_32000_LILA E_F_S.indd   14

07/01/2013   4:37:47 PM

 


background image

Night Vision

The camera is equipped with 

NEW

 

Invisible IR (infrared) 

LEDs which keep the nursery dark. The LEDs are located on 
the front of the camera and allow you to see up to 12 feet 
in complete darkness so you can check on your baby at any 
time of night. The night vision LEDs will activate automatically 
when the 

Light Sensor

 on the camera detects that the light 

levels are too low.

Adjusting the Camera Angle

The camera has a track built into the base. The track allows the camera to pivot UP 
and DOWN and turn side to side. 

Always

 return the camera to the CENTER POSITION 

before

 changing the camera angle.

FRONT 

OF 

CAMERA

DC 

INPUT

TRACK

Note: Camera does not rotate freely 360°. Rotating it past the point where 
resistance is felt will result in permanent damage to the device.

CENTER POSITION

OPERATION

INVISIBLE 

LEDs

TRADITIONAL 

LEDs

15

mylevana.com

30000_31000_32000_LILA E_F_S.indd   15

07/01/2013   4:37:49 PM

 


background image

Volume

Use the navigational arrows 

+

 to increase /decrease /mute the VOLUME. 

Ŕ

Press the 

+

 button to INCREASE the volume 

in LIVE VIEW; the VOLUME icon will display the 
volume level in the top left corner of the screen.

Ŕ

Press the 

 button to DECREASE the volume; to 

MUTE, decrease the volume until the 

icon 

appears in the top left corner of the screen.

Using the Talk to Baby™ Two-Way Intercom 

With the simple press of a button you can talk to your child at any time without 
entering the nursery. 

1. 

To talk, press and hold the 

 button on the front 

of the monitor and release to listen.

2. 

To talk when using multiple cameras, select the 

camera in the MENU and press the 

 button, 

release to listen.

MONITOR

16

mylevana.com

30000_31000_32000_LILA E_F_S.indd   16

07/01/2013   4:37:49 PM

 


background image

Using Power Save

When in

 Power Save Mode

, the monitor enters standby/sleep mode after 1 minute of 

inactivity. When sound is detected, the screen changes to live view. 

Ŕ

To access live view manually when the screen is off, press the POWER
button ONCE.

Ŕ

Power Save Mode 

extends the battery life over 48 hours. 

1. 

To set 

Power Save Mode

, press the MENU 

 

button.  Using the navigational arrows 

+

 on the 

front of the monitor, highlight the POWER SAVE 

icon and press the MENU 

 button once to select.  

2. 

Use the navigational arrows 

+

 to select the 

POWER SAVE ON 

icon and press the MENU 

 

button once to select.

3. 

To return to continuous live view, use the 
navigational arrows 

+

 to select the POWER 

SAVE OFF

 icon.

Selecting a Different Camera View

1. 

To change the camera view, press the MENU 

 button.  Using the  navigational 

arrows 

+

 on the front of the monitor, highlight the CAMERA icon and press the 

MENU 

 button once to select.  

2. 

Use the navigational arrows 

+

 to select the 

CAMERA icon of your choice and press the MENU 

 button once to select. 

3. 

Select 

to cycle though cameras 1 through 4 

and press the MENU 

 button once.  

17

MONITOR

mylevana.com

30000_31000_32000_LILA E_F_S.indd   17

07/01/2013   4:37:51 PM

 


background image

Setting the Brightness

Brightness Mode

 sets the brightness of the screen. 

Reducing

 the brightness

 

also 

extends the battery life. 

1. 

To set the 

Brightness Mode

, press the MENU 

 

button.  Using the navigational arrows 

+

 on the 

front of the monitor, highlight the BRIGHTNESS 

icon and press the MENU 

 button once to select.  

2. 

Use the navigational arrows 

+

 to select the 

desired brightness and press the MENU 

 button 

once to select.

Contacting Customer Support

Customer Support 

is just a click away whenever you need it! Our customer support 

team can be reached by email, live web chat or on our website at www.mylevana.
com/support. Our experts will be happy to assist you in English, French and Spanish.

1. 

To access 

Customer Support

, press the MENU 

 

button.  Using the navigational arrows 

+

 on the 

front of the monitor, highlight the SUPPORT 

 

icon and press the MENU 

 button once to select.  

2. 

This will take you to the screen which displays 
Customer Support contact information. Press 

the MENU 

 button once to EXIT the 

Customer 

Support

 screen.

18

Support: www.mylevana.com/support
Web: www.mylevana.com
Online Live Web Chat: www.mylevana.com

MONITOR

mylevana.com

30000_31000_32000_LILA E_F_S.indd   18

07/01/2013   4:37:53 PM

 


background image

ISSUE

POSSIBLE SOLUTION

Equipment does not function

Ŕ

Confirm that the camera and monitor are ON

Ŕ

The battery may be depleted; charge battery

Ŕ

The power adapters may not be properly 
connected

No reception

Ŕ

Camera and monitor may not be properly paired; 
follow PAIRING instructions

Ŕ

Camera may be too far away from the monitor

Ŕ

Extend the antenna on the monitor

Reception Interference 
(static)

Ŕ

The camera and monitor may be too far apart

Ŕ

The battery power may be too low

Ŕ

Other electronic devices may be interfering with 
the signal

Ŕ

The camera or monitor may be placed too close 
to many metal objects

Feedback (screeching, static)

Ŕ

The camera and monitor may be too close 
together

Ŕ

The volume on the monitor may be set too high

Noise (static, beeping)

Ŕ

Battery power may be too low

Picture works but there is no 
sound

Ŕ

Volume setting may be too low 

Picture is black and white

Ŕ

Night vision LEDs may be ON; increase the 
amount of light in the room being monitored

The rechargeable battery will 
not charge

Ŕ

The power adapters may not be connected

Ŕ

Battery pack may not be properly connected 
inside the battery compartment

Maintenance

Ŕ

Clean the surfaces of the camera and monitor with a soft, lint-free cloth

Ŕ

If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to 
not allow water into any openings

Ŕ

Never use cleaning agents or solvents

TROUBLESHOOTING

19

mylevana.com

30000_31000_32000_LILA E_F_S.indd   19

07/01/2013   4:37:53 PM

 


background image

mylevana.com

30000_31000_32000_LILA E_F_S.indd   56

07/01/2013   4:38:36 PM