Full Text Searchable PDF User Manual
P/N:750-00-00955
Model:LM-215
LED Monitor
User Manual
CCTV HOUSE, CITY PARK, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT
Tel: +44(0)1707 330541 Fax: +44 (0) 1707 330543
GENIE CCTV LTD.
www.geniecctv.com
User Manual
1
Contents
Important information ..................................................................................................................... 2
Safety warning .......................................................................................................................... 2
Notes ........................................................................................................................................ 3
Introduction to the product ............................................................................................................. 4
Product appearance ................................................................................................................. 4
Performance feature ................................................................................................................ 4
Connecting external device .............................................................................................................. 5
Illustration of the main menu .......................................................................................................... 5
Main menu ............................................................................................................................... 5
PC menu ................................................................................................................................... 6
Audio menu .............................................................................................................................. 7
Picture menu ............................................................................................................................ 7
Function menu ......................................................................................................................... 7
OSD menu ................................................................................................................................ 8
Geometry menu ....................................................................................................................... 8
Channel selection ..................................................................................................................... 8
The way of cleaning .......................................................................................................................... 9
Trouble shooting .............................................................................................................................. 9
Trouble shooting ways ...................................................................................................................... 9
User Manual
2
Important information
Safety warning
To use the product safely and rightly and to keep users from suffering hurt or property loss,
please observe the following safety precautions when installing, using and maintaining.
Please read this handbook before operating the product and keep the handbook for future
reference.
Notice and observe all the warnings and illustration.
Do not adjust, maintain or modify if you don’t have corresponding qualifications.
Do not open or remove the rear cover, box or cover board of the product. Please contact the
dealer or after-sales service center when needing internal checking, adjustment and
maintaining.
Do not place article on the product. The product might be damaged if foreign matters enter
the internal unit.
Do not tread or squeeze the power line, especially on the plug, outlet or the place where
the cable extends out of the product.
Do not put the product in inflammable or corrosive gaseous environment, which might
cause fire or damage the product. Putting the product in inflammable gas is easy to cause
dangerous explosion.
Please cut off power or the connecting line immediately if there is smoking, off-odour or
abnormal noise. Contact the after-sales service center to maintain after affirming there is no
more smoking or off-flavor. It might cause fire if it is used without maintaining.
Only qualified servicemen can maintain. If the product gets any kind of damage, such as
damage to plug, splash or foreign matter into the facility, exposed to rain or humidity, not
able to function or dropped from the high, please maintain it immediately.
Do not expose the product to the rain or chemicals. If the product is moist, please dry it
before turn on the power.
Turn off the power when clean the product.
Installment of unsuitable facility might cause the fall of the facility or other accidents. Fasten
the screw of every component when installing.
Do not touch the fixed component inside the facility, otherwise it might cause damage to
people or to the facility.
Be careful when maintaining inner body even if the power is cut off. Some facilities are
equipped with UPS, and they can continue to supply power which is dangerous to people
after the power is cut off.
User Manual
3
Notes
Please put the facility in flat, stable and draughty place and avoid direct sunlight, high
temperature, humidity, dust and corrosive gas.
If the product is installed on the wall, please make sure the wall’s load bearing is enough. To
avoid falling and hurt people, install according to the illustration.
The LCD might get nebulized when the temperature variation is big, which will cause image
distortion or decay of color. Wait for a moment (with power on) and the nebulization will
disappear.
Do not block up the ventilation opening. Install the facility according to this handbook.
Do not install the facility near any heat source such as radiator, heat register or stove.
Do not use unqualified connecting lines, which might cause equipment failure.
Do not press, stretch or heat the connecting line, which might cause damage to it.
Please firmly grasp the plug of the connecting line when inserting and drawing. Pulling the
connecting line emphatically might cause damage to it.
Cut off power and the connecting line immediately and contact the after-sales service
center if the facility or the connecting line is damaged for some reason. Continuing using
without maintaining might cause smoking or off-flavor.
Do not hang or shin on the facility, which might cause the facility to fall, upset or damaged
and cause hurt to people. Be more careful when there are kids near the facility.
Please cut off power for safety if not using the facility for a long time.
Do not let the connecting line get squeezed by the wall or buckle, pull or twine the
connecting line overly.
Make sure the power and the connecting line are cut off when moving the facility.
Keep the facility from getting collided, which might cause equipment failure.
User Manual
4
Introduction to the product
Thank you for buying this CCTV Display. We wish you to enjoy this product in the next few years.
The power dissipation is low no matter in viewing mode or standby mode, which means you
make contribution to energy saving. We are introducing the function of the product here and we
hope it can enrich your usage experience.
Product appearance
（
Photos are for reference only
）
Performance feature
Ultrathin and ultralight, convenient and artistic.
High contrast ratio and high luminance. Greatly enhances layering and presents details
better.
Automatically eliminates the ghosting, protecting the LCD panel for long-term use.
Rapid response, no trailing.
FC bus, latest control circuit. High reliability and good expansibility.
Multilevel menu display function.
Built-in power supply, low energy consumption, long service life.
Auto image adjustment function in VGA state.
Full HD LCD panel with top-ranking video process chip, enhancing the effect of display of
high-definition images. The functions such as low power dissipation, dust prevention, moisture
protection and shock resistance effectively lengthen the service life of CCTV Display
User Manual
5
Connecting external device
Please connect the monitor to external devices according to the following I/O interface list, and
choose corresponding signal incoming channel.
Attention
●
Please cut off the power of the external device and this product to make sure the
connection is normal.
Illustration of the main menu
Main menu
Press the menu button on the bottom left of the screen, and the main menu displayed on the
screen. The submenus of the main menu: PC menu, Audio menu, Picture menu, Function
menu ,OSD menu and Geometry menu.
Press the menu button to choose the submenus. The menu chosen will show a lit wireframe,
and press
▲▼
button to move among the secondary menus of the submenu.
User Manual
6
(7Key)
or
(5 Key)
A. “Source” button
Press the button to display all the signal channel menus.
B. “Upward” button
Press the button to move the cursor to the needed function.
Press the button to choose function OSD menu.
C. “Downward” button
Press the button to move the cursor to the needed function.
Press the button to choose function OSD menu.
D. “Rightward” button
Press the button to move the cursor to the needed function.
Press the button to choose function OSD menu.
E. “Leftward” button
Press the button to move the cursor to the needed function.
Press the button to choose function OSD menu.
F. “Menu” button
Press the button to display the OSD main menu.
Choose an affirming button in OSD.
G. “Power” button
Press the button to turn on or turn off the displayer.
PC menu
PC menu can set contrast, brightness, color temp and scale. Press
◄►
button to adjust, press
▲▼
button to move, press menu button to exit.
User Manual
7
Audio menu
Audio menu can set bass, treble, balance, sound mode. Press
◄►
button to adjust, press
▲▼
button to move, press menu button to exit.
Picture menu
Picture menu can set contrast, brightness, hue, saturation, sharpness, color temp, scale,
overscan and picture mode. Press
◄►
button to adjust, press
▲▼
button to move, press
menu button to exit.
Function menu
Function menu can set noise reduction and DLC. Press
◄►
button to adjust, press
▲▼
button
to move, press menu button to exit.
User Manual
8
OSD menu
OSD menu can sleep timer, auto sleep, language, H-position, V-position, duration, transparency
and reset defaults. Press
◄►
button to adjust, press
▲▼
button to move, press menu button
to exit.
Geometry menu
Geometry menu can set H-position, V-position, clock, phase and auto adjust. Press
◄►
button
to adjust, press
▲▼
button to move, press menu button to exit.
Channel selection
“Source” menu can select channel, the options include VGA, HDMI and so on. Press
▲▼
button to select,
press menu button to
affirm
.
User Manual
9
The way of cleaning
1.
Please wipe dust and other particles with clean downless mull.
2.
If it is still not clean, please smear diluent neutral cleaner free from brightener on the clean
downless mull and wipe with it. Wipe dry with a dry mull after cleaning it.
3.
Rubbing or knocking the housing with fingernails or other hard objects might cause scratch.
Trouble shooting
Before consulting service staff, please find out the possible reason for the problem and the
possible solution according to the following chart.
Trouble shooting ways
Phenomenon
Handling method
1
2
3
4
5
6
7
8
9
10
11
No image or sound
⊕
⊕
⊕
⊕
⊕
⊕
Inferior sound, normal image
⊕
⊕
⊕
⊕
Inferior image
，
normal sound
⊕
⊕
⊕
⊕
⊕
⊕
⊕
Poor signal
⊕
⊕
⊕
⊕
⊕
Vague image
⊕
⊕
⊕
⊕
Double image
⊕
⊕
⊕
⊕
Interfering lines in image
⊕
⊕
⊕
⊕
Twisty image
⊕
⊕
⊕
⊕
Poor signal
⊕
⊕
⊕
⊕
⊕
⊕
Rung stripe in image
⊕
⊕
Image vertically scrolls
⊕
⊕
⊕
⊕
Inferior color
⊕
⊕
⊕
⊕
⊕
⊕
⊕
⊕
⊕
No color
⊕
⊕
⊕
⊕
⊕
⊕
User Manual
10
Processing Method
1
Alter to another channel or signal path.
2
Check whether the signal line is connected.
3
Check whether the signal line is connected.
4
Might be disturbed by other electric appliance.
5
Adjust fine tuning setting.
6
Adjust luminance setting.
7
Adjust contrast ratio setting.
8
Adjust color setting.
9
Check whether the system is set rightly.
10
Check whether the power is on.
certificate of approval
Inspector
：
Inspector date
：
The product accords with the technical criteria and is allowed to sell