eTIGER ES-CAM2A Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

www.etiger.com

ES-CAM2A

IP Camera

Box content

ES-CAM2A x1

Mounting bracket x1

AC Adaptor x1

User Manual x1

Android and iOS apps

Before using the ES-CAM2A, download the

app

iSecurity+

on the App Store or Google

Play.

Plug the camera

Plug the AC adaptor to your ES-CAM2A, and plug the former into the mains.

Switch the Wi-Fi of your camera on

Make sure the Wi-Fi switch at the back of your

camera is on “

”.

When the LED turns green, your camera is ready

to be set up. This step can take up to 2 minutes

when started for the first time.

OFF

Connect your smartphone to the camera

iOS

Android

Go to the Wi-Fi

settings of your

smartphone,

select the network

“ES-CAM2A XXXX”

(the last 4 figures

represent the last 4

figures of the MAC

ID at the back of

your camera).

Launch the app iSecurity+

iOS

Android

Once the

connection

has been made

(after around

30 seconds),

launch

iSecurity+

iSecurity+ detects

automatically your

camera.

Select ‘

Yes

’ to start

the setup of your

camera.

Configuration of the camera

Select “

Continue

”

and follow the

instructions of the

installation assistant.

iOS

Android

Preview of the

camera

What your camera

views appears in

the interface : your

camera is connected

Select “

Connect

camera to Internet

”.

iOS

Android

Connection of the camera to the Internet

Select the Wi-Fi

network to which

your camera will be

connected.

iOS

Android

Enter the password

of the Wi-Fi network

selected and press

“

Continue

”.

Note

It may take a few

minutes for the

camera to access the

Internet.

iOS

Android

Connection to iSecurity+

Create an iSecurity+

account by filling in

the fields.

iOS

Android

Enter your iSecurity+

username and

password to log in.

iOS

Android

Creation of the profile of your camera

Choose a name and

a description for your

camera and press

“

Continue

”.

Note

The registration of

your camera on the

iSecurity+ server

will only take a few

seconds.

iOS

Android

Finalization of the installation

The installation is

complete. Exit the

connection mode

by placing the Wi-Fi

switch at the back of

the camera on “

OFF

”.

The camera

automatically

reconnects to your

Wi-Fi network.

iOS

Android

Quit and restart

iSecurity+.

You can use your

Android or iOS

smartphone / tablet

to access your camera

using an Internet

connection (Wi-Fi

or 4G).

iOS

Android

Controls on the camera

iOS

Android

Take a picture

Record a video

Sound On / Off

Hold and talk

Take a picture

Record a video

Sound On / Off

Hold and talk

Configuration of iSecurity+

Name

Rename your camera

Share

Share your camera with your friends

using your web browser

Status

Change the status of your camera to

appear online, offline, or in private.

Rotation

Normal or reverse view

Set up the infrared LEDs

Picture frequency

Up to 25fps

Quality

1~ 5 (5 being the highest quality)

Video size

320x180, 640x360, or 1280x720

Microphone

Activate / deactivate the

microphone

iOS

Android

Motion Detection and Notifications

When the camera is on, the iSecurity+ app informs you when the camera detects

an intrusion or a movement. iSecurity+ is available for download on Google Play

and the App Store.

Access your camera from a computer

Follow the link below to access your camera from a computer :

https://app.isecurityplus.com/app/c/login.html

Installation

To install the ES-CAM2A on a wall, unscrew the base of the camera and remove

the metal plate.

Fasten the mounting bracket to the wall with the screws and anchors included in

the box. Reattach the base cover and screw the stand to the mounting bracket

(see drawing on the opposite page).

2.5 mm

LED lights indications

Wi-Fi Configuration

Green:

configuration mode

Orange:

Initialization

of the configuration

mode

Switched off:

Not in

configuration mode

Network

Green:

Connected to

iSecurity+

Orange:

Connected to the

local network

Orange (blinking)

Not connected

Power

Green:

Reset

Make sure the Wi-Fi switch is on “

OFF

”. Use a pin to

reset your camera; the reset button is indicated on

the opposite drawing.

OFF

Reset

button

Specifications

Image sensor: 1/3” CMOS

Sensor resolution: 1600x1200 CMOS

Video resolution up to 1280x720p (H.264)

Photo resolution up to 1280x720px (JPEG)

Focal: 3mm, Aperture: F2.0

8 infrared LEDs for night vision

Vision scope: Horizontal: 90° / Vertical: 45° / Diagonal: 78°

Shutter speed: 1/5 – 1/16000 sec.

Refresh frequency : up to 25 pictures/sec.

Wi-Fi: IEEE 802.11 b/g/n

Built-in microphone, noise reduction

Power supply: 5V 1A, 110~240V/ DC Jack

Compatible with smartphones under iOS 5.0 (or higher) and Android / Tablets /

PC / Mac

Safety instructions

Do not point the camera directly at the sun to prevent damaging the image sensor.

Keep the camera away from heat to avoid electric shocks.

Keep the camera away from rain or moisture.

Do not attempt to open, dismantle, repair, or service the camera. Doing so may

cause electric shocks and other hazards.

Any evidence of misuse, abuse, or tampering will void the Warranty.

To maintain compliance with FCC’s RF exposure guidelines, this equipment

should be installed and operated with minimum distance of 20 cm between the

radiator and your body. Use only the supplied antenna.

Warnings

ATTENTION

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE

COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence

of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the product.

To prevent Fire or Shock Hazards, Do Not Expose This PRODUCT to Rain or

Moisture.

Apparatus shall not be exposed to dripping or splashing and no object filled with

liquids, such as vases, shall be placed on the apparatus.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified

personnel only.

Regulatory Notices for USA

This equipment has been tested and found to comply with the limits for a digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

This product bears the selective sorting symbol for waste electrical and electronic

equipment (WEEE). This means that this product must be handled pursuant to

European Directive 2002/96/EC in order to be recycled or dismantled to minimize

its impact on the environment.

For further information, please contact your local or regional authorities.

Electronic products not included in the selective sorting process are potentially

dangerous for the environment and human health due to the presence of

hazardous substances.

In compliance with European laws. This product is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC (R&TTE).

This product was designed and manufactured in compliance with Directive

2002/95/EC of the European Parliament and of the Council on the restriction of

use of certain hazardous substances in electrical and electronic equipment (RoHS

Directive - RoHS) and is deemed to comply with the maximum concentration

values set by the European Technical Adaptation Committee (TAC).

For more information

For more information on the app and to download latest updates (firmware or

app), visit iSecurity+’s website :

http://www.isecurityplus.com

-C

AM2A

-UM

-EN20150211-2.4-

ETIGER EUROPE

Rue de la Loi, 25, 7100 La Louvière, Belgium

service@etiger.com