Clifford 4105X Owner's Manual - User Manual

Full Text Searchable PDF User Manual

The company behind Clifford

Auto Security

Systems is Directed.

Since its inception, Directed has had one purpose, to
provide consumers with the finest vehicle security and
accessories available. The recipient of nearly 100 pat-
ents and Innovations Awards in the field of advanced
electronic technology.

Quality Directed products are sold and serviced
throughout North America and around the world.

Call

(800) 876-0800

for more information about our

products and ser vic es.

Directed is committed to delivering world class
quality products and services that excite and
delight our customers.

THE SCIENCE OF SECURITY

™

G4105X ML 2016 06

Vista, CA 92081

www.clifford.com

O W N E R’ S G U I D E

4105X

Congratulations

Congratulations on the purchase of your state-of-the-art keyless entry
and remote start system. Reading this Owner’s Guide prior to using
your system will help maximize the use of your system and its many
features. For more information please visit us online (see back cover
for URL). For any additional questions please contact your authorized
Directed dealer or contact Directed at 1-800-753-0600. (U.S. only) or
1-800-361-7271 (Canada only). Additional support is also available
at:

http://support.directed.com

Important Information

Government Regulations and Safety information

Read the

Government Regulations

and

Warning! Safety

First

sections of this manual prior to operating this system.

Warning!

Failure to heed this information can result in

death, personal injury or property damage and may also
result in the illegal use of the system beyond its intended
purpose.

This product is designed for fuel-injected, automatic trans-
mission vehicles only. Installing it in a standard transmis-
sion vehicle is dangerous and is contrary to its intended
use. If your vehicle is equipped with a manual transmis-
sion cease use of this product and immediately return the
vehicle to an authorized Directed dealer.

G4105 2016-06

Your Warranty

Your system comes with a warranty. The warranty terms are detailed at
the end of this guide. Make sure that you receive the proof of purchase
from your dealer, indicating the product was installed by an authorized
Directed dealer.

Replacement remote controls

Please see your authorized dealer or visit us at

www.directedstore.com

to order additional remote controls. Remote control part numbers are
found on the back of the device.

Contents

Congratulations ................................................................................................i

Important Information .........................................................................................i

Government Regulations and Safety information ...........................................i

Your Warranty ..........................................................................................ii

Replacement remote controls ......................................................................ii

Remote Control .................................................................................................3

Remote Control Functions ...................................................................................3

Standard Configuration .............................................................................3

Using the System .............................................................................................6

Locking ....................................................................................................6

Unlocking ................................................................................................6

Disabling (optional) Starter Disable ............................................................6

Panic Mode .............................................................................................6

Remote Start .............................................................................................7

Key Takeover............................................................................................8

Safety Features .........................................................................................9

Pit Stop ....................................................................................................9

Car Finder .............................................................................................10

Optional Starter Anti-Grind Circuitry .........................................................10

Disabling the Remote Start System/Garage Mode ......................................10

Remote Start Diagnostics .........................................................................11

Pairing a Remote Control .................................................................................12

Programming Options ......................................................................................13

Rapid Resume Logic .......................................................................................13

Battery Information ..........................................................................................14

Replacing the Battery ..............................................................................14

Battery Disposal .....................................................................................14

Patent Information ...........................................................................................15

Government Regulations ..................................................................................16

Warning! Safety first .......................................................................................17

Installation .............................................................................................17

Remote Start Capable .............................................................................17

Interference ............................................................................................18

Upgrades ..............................................................................................18

Water/Heat Resistance ...........................................................................18

Limited lifetime consumer warranty ....................................................................19

Remote Control

Feature

Description

Internal Antenna

Used for transmitting information

Transmit LED

Active when transmitting information

Command buttons (4)

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

AUX

AUX

Used to perform:

Locking

Unlocking

Remote Start

Silent mode/Auxiliary channel*

* On some remote controls, the

AUX

AUX

icon may exist instead of the

icon. This guide uses the

icon throughout, but function-

ality is the same regardless of which one of these icons is used
with your system.

Remote Control Functions

The remote buttons are used to send commands to the system. The but-
tons indicated below are for standard configuration.

Standard Configuration

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

Button

The lock function is controlled by

pressing

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

on the remote control

for one second. When

held

for approximately two seconds, Panic is

activated.

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

Button

The unlocking function is controlled by

pressing

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

on the remote con-

trol for one second. You can also turn Panic off with this button.

Button

Silent Mode

™

and an optional auxiliary function are controlled by

pressing

. Silent Mode works by

pressing

for less than one

second before locking or unlocking. An optional auxiliary function such
as trunk release may be controlled by

pressing

and

holding

for

approximately two seconds.

AUX

AUX

Button

The remote start function of your system is controlled by

pressing

this

button for one second.

AUX

AUX

and

Buttons

Car Finder is controlled by

pressing

these two buttons.

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

and

AUX

AUX

and

Buttons

When simultaneously pressed these buttons control the optional rear
window defogger during remote starting. The parking lights flash three
times to confirm activation. Once activated, the defogger will turn on
whenever the vehicle is remote started.

The parking lights flash twice when the defogger is deactivated. The
defogger does not turn on when the vehicle is remote started.

Important note

: Defogger is an optional feature. Additional parts and

labor may be required. See your Directed dealer for details.

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

and

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

Buttons

Timer Mode is activated when these buttons are pressed simultaneously.
When you activate Timer Mode the parking lights flash four times, after a
one second delay the engine starts. To turn the engine off, without exiting
Timer Mode, press the

AUX

AUX

The system remains in Timer Mode and will start every three hours for a
maximum of six starts unless cancelled by turning on the ignition, or by
activating any of the shutdown inputs to the system.

The parking lights flash four times indicating Timer Mode is exited.

Using the System

Locking

Pressing

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

for one second locks the system (if the door locks are con-

nected). The horn honks and the parking lights flash once to confirm
the system is locked. The Failsafe

Starter Disable also activates and

prevents the vehicle’s starter from cranking.

Important note

: Horn honk and Failsafe are both optional features.

Unlocking

Pressing

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

for one second unlocks the doors (if connected). The horn

honks twice and the parking lights flash twice to confirm unlocking of
the system. The Failsafe Starter Disable (if connected) is deactivated.

Disabling (optional) Starter Disable

If your remote control is lost or damaged, you can manually override
the Starter Disable. To do this, you must have the ve hi cle's ignition key
and know where the Valet button is located. Be sure to check with the
installer for the location of the Valet button.

To override the Starter Disable, turn the ignition on and

press

and re-

lease the Valet button within 10 seconds. The vehicle should now start.
If it does not start, you may have waited too long;

turn

the ignition off

and repeat the process.

Location of Valet button: ____________________

Panic Mode

If you are threatened in or near your vehicle, you can attract atten-

tion by trig ger ing the system with your remote control.

Press

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

for

approximately two seconds to enter Panic Mode. In Panic Mode, the
horn will honk and the parking lights will flash for 30 seconds. To stop
Panic Mode at any time,

press

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

, or

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

on the remote control.

Note:

In order for Panic Mode to be effective, the vehicle’s horn (or

optional siren) and the vehicle's parking lights must be connected.

Remote Start

This feature allows you to remotely start and run your vehicle for a

pro gram ma ble period of time. This makes it possible to warm up the

engine, and adjust the interior tem per a ture of the ve hi cle with the cli-

mate control system. If interior heating or cooling is desired, the climate

controls must be preset, and the fan blower must be set to the desired

level prior to remote starting the vehicle.

Sat mode,

bank selector

AUDIO

PWR

REW

PLAY/PROG

DISC-

DISC+

11:53

XM1-1

CH-001

VOL

SCAN

SOUND

AM/FM

CD/AUX

SAT

RADIO

SEEK

SKIP

RPT

DISP -

MODE

A.SEL

RDM

TUNE

AUTO

OFF

DUAL

A/C

MODE

Channel control

Category

Control

Text selector.

Hold for 10sec to toggle

channel or category

tune modes.

Toggles

Scan mode

Bank and

present

indicator

Channel

and text

indicator

Preset 1-6.

Hold until beep to

save to a preset.

CATEGORY

Tune mode

indicator

MODE

DUAL

OFF

AUTO

MAP/

GUIDE

SETUP

INFO

ZOOM CANCEL AUDIO

AUTO

MODE

A/C

LOAD

DISC

TAPE

AM/FM

DISP

MODE

SCAN

RPT

A.SEL/RDM

- SEEK +

DISC-

DISC+

VOL

PWR

PUSH

TUNE

SOUND

PUSH

XM1-1

VOL

CHANNEL

CATEGORY

NAME

TITLE

MODE

SCAN

SOUND

001 - HITS1

POP

MUSIC NAME

MUSIC TITLE

Channel control

Category

Control

001

014

018

040

065

115

Toggles between

channel and

category modes

Bank and

present

indicator

Upper display

text mode

selector

Sat mode

and bank

selector

Preset 1-6.

Press until

beep to save

to a preset.

Channel and text

Indicator fields

Toggles

Scan mode

Tune mode

indicator

ANTENN

SC OUTPU

Sirius-Ready, SAT Radio Ready or select OEM headunits with optional Honda Bus Compatible Translator

Headunit bus cable

SiriusConnect Cable

HON-SC1

Honda Bus

Compatible

Translator

Warning!

(1) Never remote start your vehicle

when the keys are in the ignition, except when
performing Valet

Takeover, and (2) Never start the

vehicle if it is not in PARK.

To remote start the vehicle:

1. Make sure the parking brake is set.

Press

the

AUX

AUX

button

on the

remote control once* (or the amount of times the system has been
programmed to activate the remote start).

2. The parking lights flash to confirm that the vehicle is attempting to

start. In gasoline vehicles the engine will start four seconds after
the parking lights flash, in diesel vehicles the engine starts after the
WAIT-TO-START timer has expired.

3. Once the vehicle has started, it will run for the pre- pro gram med

period of time (12, 24, or 60 minutes) or until a shutdown input
is trig gered.

* The factory setting is one

press

but this can also be programmed for

two or three presses maximum (see your authorized Directed installer
for the amount of presses programmed).

Record the number of presses to activate remote start here:____

If the engine fails to start, refer to "Disabling the Remote Start System"
and "Remote Start Diagnostics" sections of this guide.

Sat mode,

bank selector

AUDIO

PWR

REW

PLAY/PROG

DISC-

DISC+

11:53

XM1-1

CH-001

VOL

SCAN

SOUND

AM/FM

CD/AUX

SAT

RADIO

SEEK

SKIP

RPT

DISP -

MODE

A.SEL

RDM

TUNE

AUTO

OFF

DUAL

A/C

MODE

Channel control

Category

Control

Text selector.

Hold for 10sec to toggle

channel or category

tune modes.

Toggles

Scan mode

Bank and

present

indicator

Channel

and text

indicator

Preset 1-6.

Hold until beep to

save to a preset.

CATEGORY

Tune mode

indicator

MODE

DUAL

OFF

AUTO

MAP/

GUIDE

SETUP

INFO

ZOOM CANCEL AUDIO

AUTO

MODE

A/C

LOAD

DISC

TAPE

AM/FM

DISP

MODE

SCAN

RPT

A.SEL/RDM

- SEEK +

DISC-

DISC+

VOL

PWR

PUSH

TUNE

SOUND

PUSH

XM1-1

VOL

CHANNEL

CATEGORY

NAME

TITLE

MODE

SCAN

SOUND

001 - HITS1

POP

MUSIC NAME

MUSIC TITLE

Channel control

Category

Control

001

014

018

040

065

115

Toggles between

channel and

category modes

Bank and

present

indicator

Upper display

text mode

selector

Sat mode

and bank

selector

Preset 1-6.

Press until

beep to save

to a preset.

Channel and text

Indicator fields

Toggles

Scan mode

Tune mode

indicator

ANTENN

SC OUTPU

Sirius-Ready, SAT Radio Ready or select OEM headunits with optional Honda Bus Compatible Translator

Headunit bus cable

SiriusConnect Cable

HON-SC1

Honda Bus

Compatible

Translator

Warning!

It is unsafe to operate a vehicle's motor in a

garage or other closed off area. Such operation can
create a buildup of harmful gas. Breathing the exhaust
from the vehicle is hazardous and may lead to injury
or death.

Key Takeover

When you are ready to drive the vehicle:

Unlock

the doors.

Enter

the vehicle. Do

not step on the foot brake.

Insert

the key,

turn

it to the RUN (not START) position.

Step

on the

foot brake. The remote start is disabled and the parking lights turn
off.

Disengage

the parking brake and begin driving.

Note

If your vehicle uses a Smart Key or PTS (Push-To-Start) system,
please refer to the vehicle specific instructions included with
the owner's guide of the interface module or consult your
authorized dealer.

Safety Features

The following safety features will disable the remote start when acti-
vated or not allow the engine to start if not properly set before starting.

•  Foot Brake is depressed.
•  Hood is opened.
•  Garage Mode is ON (see Disabling the Remote Start System).
•  The pre-programmed run time (12, 24 or 60 minutes) has elapsed.
•  Remote Start activation procedure is repeated.
•  Parking brake is disengaged.
•  Engine over-rev protection (Tachometer mode only).

•

Pit Stop

This remote start can keep the engine running during short trips away
from the vehicle.

To enable Pit Stop Mode:

Park

in a well ventilated area.

2. With the engine running,

set

the transmission in the park position

and

ensure

the parking brake is set.

Press

and release the

AUX

AUX

button once (or the amount of times the

system has been programmed to activate the remote start), the
parking lights turn on to confirm.

Turn

off the ignition and

remove

the key, the engine continues

running.

Exit

and

secure

the vehicle, the engine runs for the programmed

runtime.

Important

: This feature will not work if the brake pedal is being pressed.

Note

Car Finder

Car finder allows you to locate your vehicle, by having the system flash
the parking lights.

To activate:

Press

and release the

AUX

AUX

and

buttons at the same time.

2. The parking lights flash slowly several times, allowing you to lo-

cate your vehicle.

Optional Starter Anti-Grind Circuitry

This system includes an anti-grind circuit that can prevent damage to
the starter motor if the key is turned to the start position while the remote
start is ON.

Note:

Anti-grind circuitry only works if an optional relay has been add-

ed and the vehicle is remote started.

Disabling the Remote Start System/Garage Mode

Garage Mode is a safety feature that disables the remote start system if
the vehicle is parked in a garage, being serviced, or used by someone
unfamiliar with remote start systems.

When Garage Mode is ON, any attempt to start the engine, activate
Timer Mode, or enter Pit Stop mode is denied and remote start diag-
nostics flashes the parking lights nine times.

Turn Garage Mode ON or OFF:

Turn

the ignition on then off.

2. Within 10 seconds,

press

and release the Valet button once.

3. The parking lights flash:

• Nine times quickly when turning on.
• Nine times slowly when turning off.

Remote Start Diagnostics

For user safety, the system must be properly configured or remote start
will not activate. A Remote Start Fault may be caused by any of several
configuration issues. If the remote start fails to activate, refer to the table
below for the command type and parking light flashes that will identify
the configuration issue and solution.

Light Flash Problem

Solution

5 flashes

Brake is on

Release the foot brake

6 flashes

Hood is open

Close the hood

8 flashes

Neutral safety is disconnected Set the parking brake or move

the shifter to the park position

9 flashes

Garage Mode is ON

Turn Garage Mode OFF

Pairing a Remote Control

Your system comes with the remote controls already programmed, how-
ever, if you are replacing or adding additional remote controls, they
must be paired to the system prior to operating the system. To pair the
remote, you need to know where the Valet button is located. If the horn
honk is not connected, the main unit LED needs to be visible for visual
confirmation. If you cannot locate or access the main unit, it is recom-
mended that you visit your authorized dealer to pair the remote. The
system is capable of accepting up to four remote controls.

Turn

key to the ON position

2. Within 10 seconds,

press

and release the Valet button once.

3. Within 10 seconds,

press

and

hold

the Valet button. The LED on

the module flashes one time and the horn (if connected) honks to
confirm entry into remote pairing. Do not release the Valet button.

Press

the

AUX

AUX

AUX

Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.

button on the remote control. The horn honks to con-

firm the remote has been paired.

Release

the Valet button.

Turn

the key to OFF position. The horn sounds one long honk (if

connected) to confirm that remote pairing has exited.

The programming routine exits if any of the following occurs:

• The ignition is

turned off.

• There is

activity for 30 seconds.

• The Valet button is

pressed

too many times.

Programming Options

Feature options will control your system's normal operation. Some op-
tions may require additional parts and installation labor. The following
is a list of the programmable options with the factory settings in

bold

•

12 minute

to 60 minute runtime. Your system can be programmed

to allow the vehicle to run for up to 60 minutes when remote
started. This can be set up to minute increments by your installer.

• Parking lights flashing or

constant

. Your system can be programmed

to flash the parking lights or have them come on constantly during
the remote start operation.

• Ignition controlled door locking ON or

OFF

. With this feature on,

the doors will lock three seconds after the ignition key is turned on,
and will unlock when the ignition key is turned off.

Important:

The door lock option must be installed for the ignition

controlled door lock feature to work.

Rapid Resume Logic

This Directed system stores its current state to non-volatile memory. If the
power to the system is disconnected and then reconnected, the system
recalls the stored state from memory.

Battery Information

The remote control* is powered by two 3V, CR2016 batteries. When
the battery begins to weaken, operating range is reduced and the LED
on the remote control dims.

* Some remote controls are powered using a single coin cell battery

(CR-2032), so please verify which type and quantity is used before
replacing.

Replacing the Battery

1. Use a small flat blade (flat-head) screwdriver and

insert

it into the

slot located along the bottom of the remote, near the key ring.
Carefully

pry

open the case.

Remove

the old batteries from the holding clip.

Orient

the new

batteries for the correct polarity and

insert

into the holding clip.

Reposition

the case parts, then snap together by

pressing

firmly

and evenly on the front and back.

Battery Disposal

Directed cares about the environment. If you need to dispose
of the battery, please do so in accordance with your munici-
pal requirements for battery disposal.

Patent Information

This product is covered by one or more of the following United States
patents:

Remote Start Patents:
5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936;
5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053;
7,483,783

Vehicle Security Patents:
5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591;
5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667;
5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484

Other patents pending.

Government Regulations

This device complies with Part 15 of FCC rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesirable operation.

This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television, which can be determined by
turning the equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

This device complies with the Industry Canada Radio Standards Specification
RSS 210. Its use is authorized only on a no-interference, no-protection basis; in
other words, this device must not be used if it is determined that it causes harm-
ful interference to services authorized by IC. In addition, the user of this device
must accept any radio interference that may be received, even if this interference
could affect the operation of the device.

Warning:

Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.

Warning! Safety first

Please read the safety warnings below before proceeding. Improper use of the
product may be dangerous or illegal.

Installation

Due to the complexity of this system, installation of this product must only be performed
by an authorized Directed dealer. If you have any questions, ask your retailer or contact
Directed directly at 1-800-753-0600.

Remote Start Capable

When properly installed, this system can start the vehicle via a command signal from
the remote control. Therefore, never operate the system in an enclosed area or partially
enclosed area without ventilation (such as a garage). When parking in an enclosed or
partially enclosed area or when having the vehicle serviced, the remote start system must
be disabled using the "Disabling the Remote Start System/Garage Mode" procedure in
this guide. It is the user’s sole responsibility to properly handle and keep out of reach from
children all remote control devices to assure that the system does not unintentionally remote
start the vehicle. IT IS RECOMMENDED THAT THE USER INSTALL A CARBON MONOX-
IDE DETECTOR IN THE LIVING AREAS ADJACENT TO THE VEHICLE. ALL DOORS LEAD-
ING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED
VEHICLE STORAGE AREA MUST BE CLOSED AT ALL TIMES. These precautions are the sole
responsibility of the user.

Use of this product in a manner contrary to its intended mode of operation may result in
property damage, personal injury, or death. (1) Never remotely start the vehicle with the ve-
hicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user
must also have the neutral safety feature of the vehicle periodically checked, wherein the
vehicle must not remotely start while the car is in gear. This testing should be performed by
an authorized Directed dealer in accordance with the Safety Check outlined in the product
installation guide. If the vehicle starts in gear, cease remote start operation immediately and
consult with the authorized Directed dealer to fix the problem.

After the remote start module has been installed, contact your authorized dealer to have him
or her test the remote start module by performing the Safety Check outlined in the product
installation guide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit

test, the remote start unit has not been properly installed. The remote start module must be
removed or the installer must properly reinstall the remote start system so that the vehicle
does not start in gear. All installations must be performed by an authorized Directed dealer.

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS
CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERATING THE REMOTE
START SYSTEM UNDER THESE CONDITIONS MAY CAUSE THE VEHICLE TO UNEXPECT-
EDLY LUNGE FORWARD RESULTING IN PROPERTY DAMAGE OR SERIOUS PERSONAL
INJURY INCLUDING DEATH. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT
AND SEEK THE ASSISTANCE OF AN AUTHORIZED DIRECTED DEALER TO REPAIR OR
DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE HELD
RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.

This product is designed for fuel-injected, automatic transmission vehicles only. Installing it in
a standard transmission vehicle is dangerous and is contrary to its intended use..

Interference

All radio devices are subject to interference which could affect proper performance.

Upgrades

Any upgrades to this product must be performed by an authorized Directed dealer. Do not
attempt to perform any unauthorized modifications to this product.

Water/Heat Resistance

This product is not designed to be water and/or heat-resistant. Please take care to keep
this product dry and away from heat sources. Any damage from water or heat will void
the warranty.

Limited lifetime consumer warranty

Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at
Directed’s election) with a comparable reconditioned model any Directed unit (hereafter the
“unit”), excluding without limitation the siren, the remote transmitters, the associated sensors
and accessories, which proves to be defective in workmanship or material under reason-
able use during the lifetime of the vehicle provided the following conditions are met: the
unit was purchased from an authorized Directed dealer, the unit was professionally installed
and serviced by an authorized Directed dealer; the unit will be professionally reinstalled in
the vehicle in which it was originally installed by an authorized Directed dealer; and the
unit is returned to Directed, shipping prepaid with a legible copy of the bill of sale or other
dated proof of purchase bearing the following information: consumer’s name, telephone
number and address; the authorized dealers name, telephone number and address; com-
plete product description, including accessories; the year, make and model of the vehicle;
vehicle license number and vehicle identification number. All components other than the
unit, including without limitation the siren, the remote transmitters and the associated sensors
and accessories, carry a one-year warranty from the date of purchase of the same. ALL
PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF
PURCHASE FROM AN AUTHORIZED DEALER WILL BE DENIED. This warranty is non-
transferable and is automatically void if: the unit’s date code or serial number is defaced,
missing or altered; the unit has been modified or used in a manner contrary to its intended
purpose; the unit has been damaged by accident, unreasonable use, neglect, improper
service, installation or other causes not arising out of defects in materials or construction.
The warranty does not cover damage to the unit caused by installation or removal of the
unit. Directed, in its sole discretion, will determine what constitutes excessive damage and
may refuse the return of any unit with excessive damage.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING
BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON-
INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND
DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME
FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS.
DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS
OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED
SECURITY SYSTEMS, INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE
THEFT. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST
VANDALISM, DAMAGE OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS;
AND HEREBY EXPRESSLY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING
WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE AND/OR VANDALISM. THIS
WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR

REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND.
IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY,
THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA.
CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN
THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED
SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE
PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES
WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES,
INCIDENTAL DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME,
LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY
AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER
A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO
THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT
HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED
DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE,
NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER CAUSES
NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.

Some states do not allow limitations on how long an implied warranty will last or the exclu-
sion or limitation of incidental or consequential damages. This warranty gives you specific
legal rights and you may also have other rights that vary from State to State.

This warranty is only valid for sale of product(s) within the United States of America and
in Canada. Product(s) sold outside of the United States of America or Canada are sold
“AS-IS” and shall have NO WARRANTY, express or implied.

For further details relating to warranty information of Directed products, please visit the
support section of Directed’s website at: www.directed.com

This product may be covered by a Guaranteed Protection Plan (“GPP”). See your
authorized Directed dealer for details of the plan or call Directed Customer Service at
1-800-876-0800.

920-10011-01 2011-06

Ask a Question ?