Full Text Searchable PDF User Manual
ClearCube Public Technical Document
Document Code: TB0141JS
Autologin Snap-in for Eon e100 I/Ports
Eon e100 I/Port, XPe
August 30, 2005
TB0141 rev 8/30/2005
8834 Capital of Texas Hwy N Suite 140 Austin, Texas 78759
voice 512 652 3500 www.clearcube.com
TB0141.fm — Autologin Snap-in for Eon e100 I/Ports
OVERVIEW / ENVIRONMENT
The default login setting for XPe-based Eon e100 I/Ports does not provide autologin into Windows XPe, as
was the case with the I8800 I/Ports. ClearCube has issued a software snap-in that corrects this issue.
Autologin to Windows XPe was provided as a default on the I8800 I/Ports. Installing this snap-in provides
autologin for XPe-based Eon e100 I/Ports. ezRemote Manager software is required to install this snap-in.
Do not use this snap-in on I8800 or I8010 I/Ports.
This snap-in should be applied to all XPe-based Eon e100 I/Ports for which autologin to Windows XPe is
desired. This patch is available on the ClearCube Support Website as:
This file contains the following files:
This Technical Bulletin
within a folder named
To install the patch using ezRemote Manager, do the following:
Download and unzip the
folder to the ezRemote Manager server.
Start ezRemote Manager and select the I/Port(s) to be patched.
icon in the menu bar.
Browse to the
folder, select the
file, and click
. The patch is installed and the I/Port reboots when the installation is complete. Following the reboot,
autologin into Windows XPe is enabled.
Re-imaging an XPe-based Eon e100 I/Port will disable autologin, requiring reinstallation of this
For more information, please contact ClearCube technical support.
Email address for ClearCube Technical Support
ClearCube Support Website
Direct line in the US
+1 (512) 652-3400
Direct line from outside the US