Full Text Searchable PDF User Manual
Double Matrix
Professional
Double sided record cleaning machine
Hi-Fi Components
clearaudio
©
electronic
GmbH
Spardorfer Str. 150
D-91054 Erlangen
Tel. +49(0)
1805/059595
FAX +49(0)
09131/51683
www.clearaudio.de
www.analogshop.de
info@clearaudio.de / copyright clearaudio
2012
User manual
Made in Germany
Version 1.7_12.11.22_E
Double Matrix
Professional
User
manual
Page 2
clearaudio electronic GmbH 2012
Dear clearaudio customer,
Congratulations on the purchase of your new
Double Matrix Professional
record cleaning machine, an
extraordinary product made by clearaudio.
The cleaning of dirty or used records improves the overall sound quality. This also applies to new vinyl
records as there is often residue left over from the pressing process.
Please read this user manual with great care, to avoid misuse or void of warranty.
Why
Double Matrix Professional
?
Many analog and music lovers, as well commercial and professional organisations asked us how it is
possible to clean vinyl records both thoroughly and quickly, and if placing the just-cleaned side of the
record on the potentially dirty turntable platter can be avoided during the process.
It is obvious when cleaning large numbers of records, especially under commercial circumstances, that
time is money.
To achieve this goal clearaudio set about designing a semi-automatic record cleaning machine that
would perfectly clean both LPs and EPs, eliminate any electrostatic charge, without the need to flip the
record over and complete this process within one minute. This required a revolutionary and
outstanding product to be developed. An intensive research and development program led clearaudio
to achieve not only these criteria but also the additional goals of efficiency, easy-of-use and longevity.
The result is the clearaudio
Double Matrix Professional.
Materials and craftsmanship
The clearaudio
Double Matrix Professional
is massively constructed from the highest grade of
materials and components. The rigid housing is machined from 4.5 mm thick aluminum plates and the
platter is made out of 10 mm thick aluminum. The corner poles, feet and the fluid tank are made out
of very rigid materials. This contributes towards the substantial total weight of approximately 16.5 kg.
The following pages will explain how to operate your clearaudio record cleaning machine correctly.
We wish you years of satisfaction from your new clearaudio
Double Matrix Professional.
Double Matrix
Professional
User
manual
Page 3
clearaudio electronic GmbH 2012
Directory
1.
Package contents
4
2.
Features
overview 5
3.
Set up
6
4.
Operational
controls
and
functions
7
5.
Beginning of operation
11
6.
Machine
maintenance
13
7.
Service information
16
8.
Technical data
17
Warranty
information 18
Important note!
Pic. 1: Warning
Double Matrix
Professional
User
manual
Page 4
clearaudio electronic GmbH 2012
1. Package contents
The clearaudio
Double Matrix Professional
is delivered in bespoke packing.
Carefully remove the record cleaning machine from the packing and place it on a safe and stable
surface.
Please check if the
Double Matrix Professional
has suffered any damage in transit. Next gently remove
the blue securing adhesive tape. Any adhesive residue from the tape can be easily rubbed off by hand.
We advise that you keep the original packing to avoid any
unnecessary damage should the machine need to be transported
in the future.
Please check the package contents of your
Double Matrix Professional
:
1. Complete pre-installed
Double
Matrix Professional machine
2. Seal Clamp
3. Filling funnel
4. Power cord
5. 4 pcs. spare microfiber strips
6. 250 ml Pure Groove cleaning fluid
7. Cover for cleaning fluid reservoir
(already installed)
8. Fluid release knob
(already mounted on the rubber tube)
9. Single Adapter
10. Warranty card *
* see page 18 for warranty information.
If any of the contents are missing please contact the clearaudio dealer where you purchased the
Double Matrix Professional
.
Pic.2: Package contents
Double Matrix
Professional
User
manual
Page 5
clearaudio electronic GmbH 2012
2. Features - overview
Both sides cleaned simultaneously
Due to the sophisticated design of the wash and vacuum arms it is now possible to clean both sides of your
precious vinyl at once.
A sophisticated magnetic mechanism is used to ensure constant brush pressure resulting in more consistent
performance as well as improved speed of use.
Left-right turn switch
The best cleaning results are obtained by cleaning in both directions.
Continuously variable speed regulation
By providing variable speed rotation the dirtiest records can be cleaned at a slower speed preserving both the
microfiber strips and your record.
Cleaning of LPs, EPs and Singles
The
Double Matrix Professional
is able to clean all these formats without any additional accessories.
You even do not need to change the cleaning vacuum arms for the different formats.
Excellent cleaning
The
Double Matrix Professional
cleaning process raises the audible improvements to a new level that regular
cleaning machines do not reach. This is proven by our laboratory measurements.
No platter
The vinyl records are not placed on any potentially dirty surface such as a turntable platter but are supported on
a label-sized platform. The integrated cleaning and vacuum brushes stabilize the vinyl disc during the cleaning
process and the record labels are completely protected both above and below by two of the highly regarded
clearaudio
Seal Clamps.
Cleaning in half of the time
Both sides of any record are cleaned simultaneously reducing cleaning time by at least 50%. Especially in
commercial use, this is an unbeatable advantage.
Integrated filter
To avoid contamination by dust or other particles the Double Matrix Professional has an integrated micro filter
ensuring a long life for the cleaning brushes and your vinyl.
Ease of use
The cleaning process and maintenance procedures are particularly easy and user-friendly.
Perfect cleaning fluid control
Unlike many other machines on the market only the fluid that is required will be dispensed. This is achieved by
two electronically controlled magnetic valves which also ensure that no fluid is able to transfer while vacuuming.
Antistatic brush
The high efficiency antistatic brush completely discharges static and may be used separately from the cleaning
process.
Noise reduction
The
Double Matrix Professional
is acoustically damped for low noise levels during use.
Double Matrix
Professional
User
manual
Page 6
clearaudio electronic GmbH 2012
3. Set up
Place the
Double Matrix Professional
on a stable surface such as a table or rack. Please note that due
to the weight of the
Double Matrix Professional
it could damage soft surfaces, or through movement of
the
Double Matrix Professional
the surface could suffer scratches. Please make sure that the surface is
able to withstand temperatures of up to 60°C.
3.1 Connecting the mains power
Connect the supplied power cord first to the IEC connector at the rear panel of the
Double Matrix
Professional
then connect it to the power outlet.
Please make sure that the appropriate
connector is used and that the voltage is correct.
Please refer to the type sticker next to the IEC
connection.
The best results will be achieved when the
Double Matrix Professional
is used in a room temperature of
between 15°C and 30°C.
3.2 Switch On
Next to the IEC connector is the mains power switch (pic. 4). When the unit is switched on the red
light of the switch is illuminated.
Make sure that the appropriate connector is used and that the voltage is correct!
Now your
Double Matrix Professional
is ready to be used.
Before use please finish reading the complete user manual!
Pic.3: Rear view
Pic.4: Connection
Double Matrix
Professional
User
manual
Page 7
clearaudio electronic GmbH 2012
4. Operational controls and functions
Please familiarize yourself with all the operational controls which are described in detail over the
following pages.
1
Power connection on the rear panel
If the unit is switched on the red light of the switch is illuminated.
If the machine is not in use for a long time please switch it off at the
rear panel.
Upper
washing arm
Lower
washing arm
Seal record
clamp
Filler hole
cover
Antistatic brush
Operational controls:
- POWER
- LIQUID
- PLATTER (Rotation)
- PLATTER SPEED
- VACUUM
Outlet tube & plug
POWER ON/ OFF
1
2
3
4
5
6
7
Guide - screws
Pic.5: Top view
Abb. 5 a: Power connection on the rear panel
Double Matrix
Professional
User
manual
Page 8
clearaudio electronic GmbH 2012
2
Antistatic brush
The antistatic brush (Pic. 6) is used to discharge any electrical charge that may be present or that is
generated while cleaning. After vacuuming make sure that the record surface is completely dry then
place the antistatic brush in position by rotating it clockwise (towards the record). Leave it in place for
at least one complete revolution.
This Function can be used to remove static even if you did not clean the record.
If the carbonfiber brush hairs do not make good contact with the record surface use a comb to put the
carbon hairs back in position.
3
Operational controls
Pic.6: Use of Antistatic brush
Pic. 7: Operational controls
Double Matrix
Professional
User
manual
Page 9
clearaudio electronic GmbH 2012
POWER = Starts and stops the
Double Matrix Professional
LIQUID = Automatically applies fluid via the washing arms
PLATTER = Clockwise / counter-clockwise rotation of the platter
PLATTER SPEED = Continuously variable speed regulation of the platter for selective cleaning
VACUUM = Activate the removal of the fluid
4
Upper and lower cleaning arms
The upper and the lower cleaning arms perform the functions of applying the cleaning fluid, cleaning
and vacuum drying. When the upper cleaning arm is in its working position (pic. 9) there is a constant
pressure on the record. In the rest position (pic. 8) the upper and the lower cleaning arms are
automatically retracted from the record. The upper cleaning arm (pic. 10) can be rotated 90°. The
lower cleaning arm cannot be moved. The magnetic mechanism automatically raises the lower arm to
the operating position when the upper arm is swung into operating position above it.
On each side of the lower cleaning arm (pic. 10) are the fluid drains. These provide built-in protection
against spillage if too much fluid is used while cleaning. Excess fluid will automatically run through the
blue tube back into the reservoir.
Pic. 9:Working position
Pic. 8: Rest position
Double Matrix
Professional
User
manual
Page 10
clearaudio electronic GmbH 2012
5
Cover filler hole
Using the supplied funnel carefully fill the fluid reservoir with clearaudio Pure Groove record cleaning
fluid.
6
Outlet tube & plug
By pulling out the plug you can empty the used cleaning fluid out of the fluid tank
(see page 14).
7
clearaudio Seal record clamp
The clearaudio Seal record clamp (pic.11) has been developed to cover and protect the record label
and to hold the records securely.
On the outer aluminum ring are two small vacuum release holes. This makes it easier to release the
clamp after the cleaning process.
Important!
Please place the Seal record clamp with some pressure on the record in order to avoid unwanted
record slipping!
Pic. 10:Washing arm
Upper washing arm
90° pivoted
Lower washing arm
not pivoted
Tube adaptor for fluid supply
Label protection
Screw to open and close
Open
Close
Pic. 11:Seal record clamp
Double Matrix
Professional
User
manual
Page 11
clearaudio electronic GmbH 2012
5. Operation
5.1 Cleaning fluid reservoir filling
We recommend only using clearaudio Pure Groove cleaning fluid for perfect results and for the safety
of your records (available from:
www.analogshop.de
).
Attention:
Foaming fluid can damage the machine and void the warranty!
The cleaning fluid reservoir has a maximum capacity of 0.35 liter. Open the fluid reservoir by
removing the round cover. Using the supplied funnel carefully fill the reservoir.
There is no need to worry if you over-fill the tank; just wipe off the excess fluid with a cloth.
5.2 Record cleaning, vacuum drying, electrostatic discharging
For the very first record cleaning process we suggest you use a defective or very used
record in order to become familiar with the machine.
1. Rotate the upper arm counter-clockwise, to the left side.
2. Remove the record clamp by twisting the locking knob counter-clockwise (pic. 11, page 10). Place
the record over the spindle and replace the record clamp. Tighten it firmly so that the record cannot
slip while vacuuming.
3. Position the upper arm over the record by swinging it clockwise 90°.
The cleaning arms will be magnetically attracted together.
4. Press the button marked ‘LIQUID’. This will fill the rubber tubes with cleaning fluid. Wait until the
fluid comes out of the cleaning arms onto the upper and lower surface of the record. The microfiber
brushes should be wet before starting the platter rotation.
Important: Press the ‘LIQUID’ button for a maximum of one turn.
Do not press the button again!
4. To start the platter revolving press the ‘POWER’ button. By using the ‘PLATTER SPEED’ control you
can vary the speed of the platter and therefore the cleaning process of your record. The combination
of quantity of fluid dispensed and speed of revolution should be adjusted so that the fluid forms a
complete unbroken surface across the record.
5. Depending on the dirtiness of the record let the platter rotate 3 to 5 times in each direction.
Caution:
Please ensure that there is enough fluid on the record surface.
For a very intense clean, you can stop the platter during the cleaning process and wait 30
to 60 seconds for the fluid to fully absorb any contaminants.
Double Matrix
Professional
User
manual
Page 12
clearaudio electronic GmbH 2012
5.3 Vacuum drying
6. To achieve a perfect result, proper vacuuming is necessary. Press the ‘VACUUM’ button to start the
vacuum drying process.
7. When the record is dry always switch off the vacuum first, then pull the upper cleaning arm upwards
and swing it back to the left to its rest position.
Finally stop the platter using the ‘POWER’ button.
Important!
The cleaning arm should always be placed back in its rest before stopping the platter.
After vacuum drying never change the platter direction.
8. Position the antistatic brush over the record by lifting the brush up and swinging it towards the
record. Let the platter turn for at least one more complete revolution.
You should perform this procedure after every cleaning process.
After the antistatic procedure place the antistatic brush back in its rest position and switch off the
platter.
Never use the antistatic brush when the record is wet!
Now remove the record and enjoy a cleaner window to the music
.
5.3 Further care instructions
1. Never use the antistatic brush on wet records.
2. Dust and dirt will build up on the microfiber strips and should be removed after every use.
We recommend using a clean and soft cloth.
3. Please change the microfiber strips at regular intervals, especially if you use the machine very often.
Double Matrix
Professional
User
manual
Page 13
clearaudio electronic GmbH 2012
6. Machine maintenance
6.1 Changing the microfiber strips
This procedure will be easier if you remove the upper cleaning arm.
Releasing the upper cleaning arm
First take the rubber tube off of the upper cleaning arm (pic. 12, no.1).
Now release the positioning screws by turning them counter-clockwise until they stand
5 - 8mm further out of the housing. It is not a problem if you release the screws completely
(pic. 12, no.2).
Now you will be able to remove one or both cleaning arms. (pic. 12, no. 3)
To prevent any scratches place them on a soft surface.
Before removing the old microfiber strips, carefully note their exact position on the cleaning arms.
Peel off the old strips and clean away any adhesive residue. The surface must be clean and dry.
Remove the protection foil, place the new microfiber strips in position and press the gently onto the
cleaning arms.
Attention!
Do not place the strips over the small fluid dispensing holes.
After changing the microfiber strips reinstall the cleaning arms by reversing the process described
above.
6.2 Self-cleaning procedure
Do not place a record onto the machine during the self-cleaning process.
Depending on the dirtiness of the records after cleaning several records you should clean your cleaning
arms as dust and dirt may lessen the cleaning performance.
1.
Place the upper cleaning arm in the working position over the lower one.
2.
Press the ‘LIQUID” button for a few seconds to wet the microfiber strips.
3.
Press ‘VACUUM’ for a few seconds to dry the strips.
4.
The self-cleaning process is complete.
Pic. 12: Washing arms
1. Pull off both rubber tubes
3. Take off the washing arm
2. Unscrew the locking screws by
approximately 5-8mm
Double Matrix
Professional
User
manual
Page 14
clearaudio electronic GmbH 2012
TIPP
6.3 Waste fluid tank
The waste fluid tank has a capacity of 0.75 liter, which should allow 100 records to be cleaned before it
needs emptying. Of course this depends on the amount of fluid used for each cleaning.
If you clean more than 20 records in one day you should also empty the waste fluid tank at the end of
that day.
6.4 Draining and cleaning of the waste fluid tank
Draining the waste fluid tank
Place a suitable container on the floor for the waste fluid. Remove the cap from the rubber tube at the
rear of the machine and place the tube into the disposal container. Tilt the machine towards the back
(about 45°) until the fluid drains out of the tube.
Attention!
The rubber tube should only be opened for fluid release! When finished, always securely
reseal the tube with the cap!
Do not reuse the used fluid!
Cleaning the waste fluid tank
Remove the upper cleaning arm and pour cleaning fluid into the stainless steel tube.
A mixture of water and vinegar works well.
Attention!
During the cleaning process, never switch on the vacuum!
Let the fluid rest in the tank for about 20 minutes then drain as explained above.
Pic. 13 Rubber tube seal
Draining the cleaning fluid reservoir
If your
Double Matrix Professional
ever needs to be transported make sure that there is no fluid left in
it.
It may be necessary to empty both the waste fluid tank and cleaning fluid reservoir.
Pull off the two rubber tubes from the cleaning arms and place them into a suitable container. Push the
‘LIQUID’ button to pump the fluid into the container until there is no fluid left.
Push the rubber tubes back onto the cleaning arms.
If you do not use the machine for a long period we recommend draining both the waste
fluid tank and cleaning fluid reservoir and disconnect it from the mains.
Double Matrix
Professional
User
manual
Page 15
clearaudio electronic GmbH 2012
7. Warranty information
The warranty period for the
Double Matrix Professional
is two years.
You can achieve the extended clearaudio warranty time of three years, if you fill out the
warranty card and send it to the following address within two weeks after purchase:
clearaudio electronic GmbH
Spardorfer Str. 150
91054 Erlangen
Germany
Please note: if fluids which produce foam or which are acid-based have been used, or if the
precautions which have been mentioned in this instruction manual have not been followed, the
warranty will be void.
The
Double Matrix Professional
should only be repaired by clearaudio approved institutions or
persons, or by clearaudio, otherwise the warranty will be void.
For your own safety a frequent visual check of the mains cable is suggested. If any damage should
occur, repair or exchange should be done immediately using an approved electrician or institution!
Any service of clearaudio products should only be done through certified clearaudio dealers.
If damage for any reason should occur where repair to the machine is necessary, it should be sent to
the selected dealer, distributor or directly to:
clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Tel/Phone: +49-(0)9131/ 40300100
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
If a warranty repair is accepted by clearaudio the repair will be free of charge during the warranty
period.
If you transport or ship the clearaudio
Double Matrix Professional
machine
for any reason, the
original packaging must be used. Please pack the machine as it was packed originally by clearaudio
to ensure secure transport.
Legal disclaimer:
clearaudio refuse to cover any claims or damage to records or any other damage that have been
caused by misuse or mishandling of the
Double Matrix Professional
machine!
Double Matrix
Professional
User
manual
Page 16
clearaudio electronic GmbH 2012
8. Technical Data
Construction: The
Double Matrix Professional
is a bi-directional fully automatic
record cleaning machine including vacuum record drying.
Weight: approx.
16.5
kg
Dimensions (LxWXH) mm:
410 x 385 x 175
Dimensions (LxWxH) inches:
16.14 x 15.16 x 6.89
Total height:
265 mm / 10.43 inches (incl. record clamp)
Warranty:
three years* (see section 7)
Total power consumption:
500 Watt
Power while suction:
400 Watt
Off mode:
0 Watt (by switching off at the rear of the machine)
Noise level:
approx. 60 - 65 db
Further accessories:
Dust cover (Art. No. AC127)
”Pure Groove” record cleaning fluid (Art. No. AC084)
available at:
www.analogshop.de
* applies only if warranty card has been filled out and sent to clearaudio in within two weeks (see
section 7)
CE-
MARKIERUNG
The clearaudio
Double Matrix Professional
is approved according to the regulations of the CE
certification and other international standards and approvals.
clearaudio electronic is not responsible for typographical errors in descriptions. Technical specifications subject
to change or improvement without prior notice. Availability as long as stock lasts. Copies and imprints- also only
in extracts - require written conformation through clearaudio electronic GmbH; Germany
clearaudio electronic GmbH 2012
Attention:
This machine is designed to be used in heated or climate controlled surroundings.
Never touch the power cable with wet hands or other wet body parts!
Never place or use any equipment with open flames, such as candles, on top of this
equipment!
Version: November 2012
Double Matrix
Professional
User
manual
Page 17
clearaudio electronic GmbH 2012
To achieve the full clearaudio warranty, it is necessary that you fill out and send the corresponding part of
the warranty registration certificate /card back to clearaudio, within two weeks after purchase.
Only if the product is returned in it’s original packing clearaudio can provide the warranty of three years.
Otherwise clearaudio provides the legal warranty of two years.
ENGLISH
WARRANTY
For warranty information, contact your local clearaudio distributor.
RETAIN YOUR PURCHASE RECEIPT
Your purchase receipt is your permanent record of a valuable purchase.
It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with clearaudio.
IMPORTANT
When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase. Your purchase receipt or invoice is adequate for
such proof.
FOR U.K. ONLY
This undertaking is in addition to a consumer's statutory rights and does not affect those rights in any way.
FRANÇAIS
GARANTIE
Pour des informations sur la garantie, contacter le distributeur local clearaudio.
CONSERVER L'ATTESTATION D'ACHAT
L'attestation d'achat est la preuve permanente d'un achat de valeur. La conserver en lieu sur pour s'y reporter aux fins d'obtention d'une couverture d'assurance
ou dans le cadre de correspondances avec clearaudio.
IMPORTANT
Pour l'obtention d'un service couvert par la garantie, il incombe au client d'établir la preuve de l'achat et d'en corroborer la date. Le reçu ou la facture constituent
des preuves suffisantes.
DEUTSCH
GARANTIE
Bei Garantiefragen wenden Sie sich bitte zunächst an Ihren clearaudio-Händler.
Heben Sie Ihren Kaufbeleg gut auf.
WICHTIG!
Die Angaben auf Ihrer Quittung erlauben uns die Identifizierung Ihres Gerätes und belegen mit dem Kaufdatum die Dauer Ihrer Garantie-Ansprüche.
Für Serviceleistungen benötigen wir stets die Gerätenummer.
Diese finden Sie auf dem Typenschild auf der Rückseite des Gerätes oder auch in der beigefügten Garantie-Registrierkarte.
NEDERLANDS
GARANTIE
Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke clearaudio.
UW KWITANTIE, KASSABON E.D. BEWAREN
Uw kwitantie, kassabon e.d. vormen uw bewijs van aankoop van een waardevol artikel en dienen op een veilige plaats bewaard te worden voor evt, verwijzing
bijv, in verbend met verzekering of bij correspondentie met clearaudio.
BELANGRIJK
Bij een evt, beroep op de garantie is het de verantwoordelijkheid van de consument een gedateerd bewijs van aankoop te tonen. Uw
kassabon of factuurzijn voldoende bewijs.
ITALIANO
GARANZIA
L’apparecchio è coperto da una garanzia di buon funzionamento della durata di un anno, o del periodo previsto dalla legge, a partire dalla data di acquisto
comprovata da un documento attestante il nominativo del Rivenditore e la data di vendita. La garanzia sarà prestata con la sostituzione o la riparazione gratuita
delle parti difettose.
Non sono coperti da garanzia difetti derivanti da uso improprio, errata installazione, manutenzione effettuata da personale non autorizzato o, comunque, da
circostanze che non possano riferirsi a difetti di funzionamento dell’apparecchio. Sono inoltre esclusi dalla garanzia gli interventi inerenti l’installazione e
l’allacciamento agli impianti di alimentazione.
Gli apparecchi verranno riparati presso i nostri Centri di Assistenza Autorizzati. Le spese ed i rischi di trasporto sono a carico del cliente. La casa costruttrice
declina ogni responsabilità per danni diretti o indiretti provocati dalla inosservanza delle prescrizioni di installazione, uso e manutenzione dettagliate nel presente
manuale o per guasti dovuti ad uso continuato a fini professionali.
ESPAÑOL
GARANTIA
Para obtener información acerca de la garantia póngase en contacto con su distribuidor clearaudio.
GUARDE SU RECIBO DE COMPRA
Su recibo de compra es su prueba permanente de haber adquirido un aparato de valor, Este recibo deberá guardarlo en un lugar seguro y utilizarlo como
referencia cuando tenga que hacer uso del seguro o se ponga en contacto con clearaudio.
IMPORTANTE
Cuando solicite el servicio otorgado por la garantia el usuario tiene la responsabilidad de demonstrar cuándo efectuó la compra. En este caso, su recibo de
compra será la prueba apropiada.