PDF User Manual

  1. Home
  2. Manuals
  3. Zodiac LIZO1813 Reference Manual

Zodiac LIZO1813 Reference Manual

ZO1600 ZO1102 ZO1500 Z02807 ZO2002 ZO2102 ZO2105 ZO2200 ZO2202 ZO2206 ZO2208 ZO2209 ZO2210 ZO2219 ZO2221 ZO2224 ZO2225 ZO2228 ZO2229 ZO2230 ZO2231 ZO2233 ZO2234 ZO2236 ZO2237 ZO2240 ZO2244 ZO2245 ZO2247 ZO2248 ZO2251 ZO2252 ZO2255 ZO2257 ZO2260 ZO2302 ZO2303 ZO2304 ZO2305 ZO2306 ZO2308 ZO2310 ZO2402 ZO2404 ZO2405 ZO2406 ZO2503 ZO2600 ZO2700 ZO2701 ZO2702 ZO2703 ZO2800 ZO3201 ZO3700 ZO3703 ZO3900 ZO3909 ZO4002 ZO4203 ZO4300 ZO4500 ZO4506 ZO5505 ZO5800 ZO6200 ZO7000 ZO7002 ZO7003 ZO7008 ZO7009 ZO7010 ZO7101 ZO7102 ZO7304 ZO7305 ZO7306 ZO7500 ZO7502 ZO7903 ZO8000 ZO8001 ZO8007 ZO8008 ZO8009 ZO8010 ZO8011 ZO8503 ZO8507 ZO8516 ZO8518 ZO8519 ZO8520 ZO8522 ZO8524 ZO8525 ZO8527 ZO8528 ZO8529 ZO8530 ZO8531 ZO8532 ZO8533 ZO8534 ZO8535 ZO8536 ZO8801 ZS2940 ZS2942 ZS5533 ZS5543 715 517 507 5021.D 5030.D ETA G10 515.24 H STP1-11

Made by: Zodiac
Type: Reference Guide
Category: Watch
Pages: 18
Size: 1.09 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

3

3 Hand with Date

(Model 715)

Setting the time

1. Pull crown out to position III (the watch stops).
2. Turn crown until you reach the correct time.
3. Push crown back to position I.

Setting the date

1. Pull crown out to position II (the watch continues to run).
2. Turn crown until yesterday’s date appears.
3. Pull crown out to position III (the watch stops).
4. Turn crown until correct date appears.
5. Continue to turn crown until correct time appears.
6. Push crown back to position I.

Do not change the date between the hours of 10pm and 2am. This is the 
time when the movement is in position to carry out the automatic date 
change, and any interference may cause damage to the movement.

ENGLISH

I

II III

Hour hand

Minute hand

Second hand

Crown

Date

 


background image

4

3 Hand with Day and Date

(Models 517 and 507)

Setting the time

1. Pull crown out to position III (the watch stops).
2. Turn crown until you reach the correct time.
3. Push crown back to position I.

Setting the day and date

1. Pull crown out to position II (the watch continues to run).
2. Turn crown clockwise to set the date. Set to the previous day.
3. Turn crown counter-clockwise to set the day. Set to the previous day.
4. Pull crown out to position III (watch stops).
5. Continue to turn crown until correct time appears.
6. Push crown back to position I.

Do not change the date between the hours of 10pm and 2am. This is the 
time when the movement is in position to carry out the automatic date 
change, and any interference may cause damage to the movement.

I

II III

Hour hand

Minute hand

Second hand

Day

Crown

Date

 


background image

5

Chronograph 2 Eye

(Models 5021.D)

Setting the time

1. Pull crown out to position III (the watch stops).
2. Turn crown until you reach the correct time.
3. Push crown back to position I.

Setting the date

1. Pull crown out to position II (the watch continues to run).
2. Turn crown until yesterday’s date appears.
3. Pull crown out to position III (the watch stops).
4. Turn crown until correct date appears.
5. Continue to turn crown until correct time appears.
6. Push crown back to position I.

I

II III

Crown

Second hand

Hour hand

Minute hand

Date

 


background image

6

Chronograph

• The minute counter measures 30 minutes per rotation.
• The center stop-second measures 60 seconds per rotation.

Please note:
Before using the chronograph functions, please ensure that:

- the crown is in position I (= normal position).
- the two chronograph hands are precisely at zero position following 

activation of pusher B. Should this not be the case, the positions of 
the hands must be adjusted (see the chapter entitled “Adjusting the 
chronograph hands to zero position”).

Chronograph: Basic function

(Start / Stop / Reset)
1. Press pusher A to start the center stop-second hand.
2. To stop the timing, press pusher A again.
3. To reset the two chronograph hands to zero positioning, press 

pusher B.

I

II III

Crown

Center stop-second

Minute counter

Pusher A

Pusher B

 


background image

7

Chronograph: Intermediate or interval timing

1. Press pusher A to start the center stop-second hand.
2. Press pusher B to stop the chronograph.

*Note: Although the chronograph hands have stopped, the movement 
continues to record the current timing.

3. Make up the measured time: 

Press pusher B again and the 2 chronograph hands are quickly 
advanced to the ongoing measured time. To continue to record 
intervals, continue to push pusher B.

4. Press pusher A to stop and the final time is displayed.
5. To reset the two chronograph hands to zero positioning, press 

pusher B.

Adjusting the chronograph hands to zero position

1. Pull crown out to position III (the two chronograph hands are in their 

correct or incorrect zero position).

2. Keep pushers A and B depressed simultaneously for at least 2 

seconds (the center stop-second rotates by 360° - corrective mode 
is activated).

3. Press pusher A to single step the center stop-second hand. Press 

and hold pusher A to advance the center stop-second hand quickly. 
Press pusher B to advance to the next hand.

4. Press pusher A to single step the minute counter hand. Press and 

hold pusher A to advance the minute counter hand quickly.

5. Return the crown to position I.

 


background image

8

Chronograph 3 Eye

(Models 5030.D)

Setting the time

1. Pull crown out to position III (the watch stops).
2. Turn crown until you reach the correct time.
3. Push crown back into position I.

Setting the date

1. Pull crown out to position II (the watch continues to run).
2. Turn crown until yesterday’s date appears.
3. Pull crown out to position III (the watch stops).
4. Turn crown until correct date appears.
5. Continue to turn crown until correct time appears.
6. Push crown back into position I.

I

II III

Crown

Second hand

Hour hand

Minute hand

Date

 


background image

9

Chronograph

• The chronograph’s hour counter measures times up to 

12 hours.

• The minute counter measures 30 minutes per rotation.
• The center stop-second measures 60 seconds per rotation.

Please note:
Before using the chronograph functions, please ensure that:

- the crown is in position I (= normal position).
- the three chronograph hands are precisely at zero position following 

activation of pusher B. Should this not be the case, the positions of 
the hands must be adjusted (see the chapter entitled “Adjusting the 
chronograph hands to zero position”).

Chronograph: Basic function

(Start / Stop / Reset)
1. Press pusher A to start the center stop-second hand.
2. To stop the timing, press pusher A again.
3. To reset the three chronograph hands to zero positioning, press 

pusher B.

I

II III

Crown

Hour counter

Minute counter

Center stop-second

Pusher A

Pusher B

 


background image

10

Chronograph: Intermediate or interval timing

1. Press pusher A to start the center stop-second hand.
2. Press pusher B to stop the chronograph.

*Note: Although the chronograph hands have stopped, the movement 
continues to record the current timing.

3. Make up the measured time:

Press pusher B again and the 3 chronograph hands are quickly 
advanced to the ongoing measured time. To continue to record 
intervals, continue to push pusher B.

4. Press pusher A to stop and the final time is displayed.
5. To reset the three chronograph hands to zero positioning, press 

pusher B.

Adjusting the chronograph hands to zero position

1. Pull crown out to position III (all three chronograph hands are in their 

correct or incorrect zero position).

2. Keep pushers A and B depressed simultaneously for at least 2 

seconds (the center stop-second rotates by 360° - corrective mode 
is activated).

3. Press pusher A to single step the center stop-second hand. Press 

and hold pusher A to advance the center stop-second hand quickly. 
Press pusher B to advance to the next hand.

4. Press pusher A to single step the hour counter hand. Press and hold 

pusher A to advance the hour counter hand quickly. Press pusher B 
to advance to the next hand.

5. Press pusher A to single step the minute counter hand. Press and 

hold pusher A to advance the minute counter hand quickly.

6. Return the crown to position I.

 


background image

11

Chronograph 3 Eye

(Model ETA G10)

Setting the time

1. Pull crown out to position III (the watch stops).
2. Turn crown until you reach correct time.
3. Push crown back into position I.

Setting the date

1. Pull crown out to position II (the watch continues to run).
2. Turn crown until yesterday’s date appears.
3. Pull crown out to position III (the watch stops).
4. Turn crown until correct date appears.
5. Continue to turn crown until correct time appears.
6. Push crown back into position I.

I

II III

Crown

Second hand

Hour hand

Minute hand

Date

 


background image

12

Chronograph

• The chronograph’s hour counter measures times up to 

12 hours.

• The minute counter measures 30 minutes per rotation.
• The center stop-second measures 60 seconds per rotation.

Please note:
Before using the chronograph functions, please ensure that:

- the crown is in position I (= normal position).
- the three chronograph hands are precisely at zero position following 

activation of pusher B. Should this not be the case, the positions of 
the hands must be adjusted (see the chapter entitled “Adjusting the 
chronograph hands to zero position”).

Chronograph: Basic function

(Start / Stop / Reset)
1. Press pusher A to start the center stop-second hand.
2. To stop the timing, press pusher A again.
3. To reset the three chronograph hands to zero positioning, press 

pusher B.

I

II III

Crown

1/10 Second counter

Minute counter

Center stop-second

Pusher A

Pusher B

 


background image

13

Chronograph: Intermediate or interval timing

1. Press pusher A to start the center stop-second hand.
2. Press pusher B to stop the chronograph.

*Note: Although the chronograph hands have stopped, the movement 
continues to record the current timing.

3. Make up the measured time:

Press pusher B again and the 3 chronograph hands are quickly 
advanced to the ongoing measured time. To continue to record 
intervals, continue to push pusher B.

4. Press pusher A to stop and the final time is displayed.
5. To reset the three chronograph hands to zero positioning, press 

pusher B.

Adjusting the chronograph hand to zero

1. Pull crown out to position II (all 3 hands are in their correct or 

incorrect position).

2. Press pusher A to single step the 1/10 second hand. Press and hold 

pusher A to advance the 1/10 second hand quickly.

3. Press pusher B to single step the center stop-second hand. Press and 

hold pusher B to advance the center stop-second hand quickly.

4. Pull out crown to position III.
5. Press pusher A to single step the minute counter hand. Press and 

hold pusher A to advance the minute counter hand quickly.

6. Return the crown to position I.

 


background image

14

24-Hour 4 Hand

(Model 515.24 H)

Setting the time

1. Pull crown out to position III (the watch stops).
2. Turn crown until you reach the correct time.
3. Push crown back into position I.

Note: While crown is in position III, the 24-hour hand will rotate 
simultaneous with the minute and hour hand.

Setting the 24-hour hand

1. Pull crown out to position II.
2. Turn crown in the counter-clockwise direction until the 24-hour hand 

shows the current time on the fixed bezel.

3. Push crown back into position I.

I

II III

Crown

Second hand

Hour hand

Minute hand

Date

24-hour hand

 


background image

15

GMT - 4 Hand - World Time

(Model 515.24 H)

Crown A

I = normal position, crown completely pushed in
II = city setting

Crown B

I = normal position, crown completely pushed in
II = clockwise: date setting, counter-clockwise: 24-hour hand setting
III = time setting

I

II

III

I

II

Crown A

Crown B

Second hand

24-hour hand

Hour hand

Fixed Bezel

Minute hand

Turning City Ring

 


background image

16

Setting the time

1. Pull crown B out to position III (the watch stops).
2. Turn crown B until you reach the correct time.
3. Push crown B back to position I.

Note: While crown B is in position III, the 24-hour hand will rotate 
simultaneous with the minute and hour hand.

Setting the 24-hour hand

1. Pull crown B out to position II.
2. Turn crown B in the counter-clockwise direction until the 24-hour 

hand shows the current time on the fixed bezel.

3. Push crown B back to position I.

Setting the city ring

1. Pull crown A out to position II.
2. Turn crown A to align the local city with the 24-hour hand.
3. Push crown A back to position I.
4. All cities are now aligned with the appropriate times.

Note: It is important to set the 24-hour hand before setting the city time.

 


background image

17

Tachymeter Usage

T

T

The Tachymeter function is used to measure the rate of speed of an 
object over a fixed distance. The scale, located either on the top ring or 
the inside bezel of the timepiece, will display speed in Miles, Knots, or 
Kilometers per hour.

Example of usage: In a driving race, the car 
passes the first mile (km) post when the 
seconds hand is at the 12:00 position (60 
second mark). Commence measurement. 
At the 35 second mark the car passes the 
second mile (km) post, you will see that the 
car travelled a distance of one mile at 100 
miles (km) an hour.

Automatic Winding Movement

A timepiece fitted with an automatic winding movement obtains the 
power to wind itself by the movement of your wrist. It is important that 
your timepiece is adjusted to match the size of your wrist. A loose fit 
may result in a loss in capacity of the timepiece to wind itself. When 
fully wound, your timepiece has a power-reserve of approximately 42 
hours. If the timepiece has not been worn for over 42 hours it is advised 
that it be manually wound to ensure necessary power-reserve.

 


background image

18

Water Resistance

All Zodiac timepieces are designed with a minimum water-
resistance rating of 3ATM (100ft/30m).

The water-resistance of a timepiece protects the movement 
from, dust, moisture, and risk of damage to the movement 
should it be immersed in water.

Please see chart for guidelines for recommended exposure of 
various water ratings.

It is important not to attempt to adjust the position of the 
crown while the timepiece is in contact with water. Water can 
enter the case causing damage to the movement.

For timepieces with screw-down crowns, it is important to 
ensure the crown is in the proper position and completely 
locked before contact with water.

For timepieces with chronograph functions, do not engage 
the chronograph under water, as water may leak in the case 
and cause damage to the movement.

 


background image

19

All Zodiac timepieces are designed to withstand use as 
indicated on line 1 of the following chart.

Indication

Water-related Use

Water-resistant 

characteristics

Light spray 

perspiration,

light rain, etc.

Bathing, 

etc.

Swimming,

 etc.

Skin diving, 

(Diving 

without 

oxygen 

cyliinder)

1

3 ATM

O K

N O

N O

N O

2

5 ATM

O K

O K

N O

N O

3

10 ATM

O K

O K

O K

N O

4

20 ATM

O K

O K

O K

O K

5

30 ATM

O K

O K

O K

O K

Always set the crown in the normal position.

Tighten screwlock crown completely.

Use Precautions

Resistance to Water

 


background image

20

Care and Precautions

Each Zodiac timepiece is designed and manufactured to exceed the 
highest of standards. Unlike most other mechanical objects, a watch 
operates non-stop. In order to ensure optimal performance and longevity 
from your timepiece, please review the simple guidelines for care and 
precautions of your new Zodiac timepiece.

Care

Your timepiece should be cleaned with a soft cloth and water only. Do 
not submerge your timepiece. Your timepiece should be rinsed clean and 
dried with a soft cloth after any saltwater use. In order to maintain the 
“new look” of metal bracelets, we recommend periodic cleanings of the 
bracelet. Dip a soft brush in warm soapy water and gently rub bracelet 
clean. We advise having your timepiece serviced every 18-24 months to 
ensure long use and trouble free operation.

Precautions

Your timepiece is a complex integration of parts and components 
brought together by skilled craftsmen. There are certain actions or 
environmental situations that may damage or impede your timepiece’s 
ability to perform optimally.

It is important to avoid the following conditions: extreme heat or cold, 
as well as prolonged periods of exposure to direct sunlight, exposure to 
wet conditions that exceed your timepieces’s water rating (see case back 
and chart). Never operate any of the function buttons or crown when 
timepiece is in contact with water.

Your timepiece should not be affected by magnetic fields generated by 
household items such as televisions and stereos, but avoidance of other 
strong electric fields or static electricity, which may interrupt mechanism, 
is suggested. It is also important to avoid extreme shock or impact.