Full Text Searchable PDF User Manual
?
?
Two AC power cords
19” equipment rack
Items not included in this box that you will need:
In the box, you will find:
2
A) Install rack-mounting hardware on TMG3202
and install on equipment rack.
B) Connect Ethernet port to Linux Host.
3
4
Connect to VoIP network.
Power LED
Serial Port
TMG3202 AC Quick Installation Guide
TelcoBridges, On a Blade, System-Blade, TB-1+1 Solution, TB-16-E1/T1/J1, TB640-DS3, TB640-E1/T1/J1, TB640-OC3/STM-1, TB-8-E1/T1/J1, TB-IVR Mezzanine, TB-Multi-Blade, TB-Multi-Blade Mezzanine, TB-N+1-15 Solution,
TB-N+1-3 Solution, TB-StreamServer, TBVideo,TB-VoIP Mezzanine, TM-1000 Network Probe, Tmedia, TMP6400, TMG3200 are trademarks of
ridges Inc. All rights reserved 2007. All other trademarks are property of their
owners. Information subject to change without notice. 9010-00183-2A, Issue 2
TelcoB
1
VoIP Ports 1& 2 (VoIP-1&2)
Reset Button
?
?
?
?
?
?
?
?
One TMG3202
One set of mounting brackets with screws
One DB-9 to RJ-45 adapter
SCSI Cables and Patch Panels, if applicable
Two CAT5 Ethernet Cables (male-male)
One warranty sheet
One packing slip
One TMG3202 Quick Installation Guide
Ethernet Port
Linux Host
USB Port
Linux Host
*ETH
VoIP
*TMS
1
2
15
16
14
12
10
8
6
4
13
11
9
7
5
3
1
2
1
1
2
2
*NOTE:
Ethernet ports (ETH-1&2), and
TMS ports (TMS-1&2) are
unused.
7
5
TMG3202 AC Quick Installation Guide
TelcoBridges, On a Blade, System-Blade, TB-1+1 Solution, TB-16-E1/T1/J1, TB640-DS3, TB640-E1/T1/J1, TB640-OC3/STM-1, TB-8-E1/T1/J1, TB-IVR Mezzanine, TB-Multi-Blade, TB-Multi-Blade Mezzanine, TB-N+1-15 Solution,
TB-N+1-3 Solution, TB-StreamServer, TBVideo,TB-VoIP Mezzanine, TM-1000 Network Probe, Tmedia, TMP6400, TMG3200 are trademarks of
ridges Inc. All rights reserved 2007. All other trademarks are property of their
owners. Information subject to change without notice. 9020-000183-2A, Issue 2
TelcoB
?
?
RJ-45 Interface (T1/E1/J1)
SCSI Interface (T1/E1/J1), a patch panel is provided
Connect to PSTN Network, using one of the following options:
?
?
Dual BNC (DS3)
Optical Interface (OC3/STM-1)
A.
Next Steps? Refer to the TMG3200 documentation set for information on configuring
and administering your TMG3202.
ETH
VoIP
TMS
1
2
1
1
2
2
49-64
33-48
17-32
1-16
SCSI
ETH
VoIP
TMS
1
2
15
16
14
12
10
8
6
4
13
11
9
7
5
3
1
2
1
1
2
2
RJ-45
ETH
VoIP
TMS
1
2
1
1
2
2
BIT1
BIT2
APS
MAIN
STM 1
ETH
VoIP
TMS
1
2
1
1
2
2
Rx
Tx
BIT1
BIT2
Rx
Tx
Rx
Tx
3
2
1
DS3
A) Connect to two independent
power sources (if only one power source is used,
press the green button at the rear
of the unit to disable the audible alarm).
B) Turn on power.
6
Audible
alarm
button
ETH
VoIP
TMS
1
2
1
1
2
2
Power
switch
Power
socket
1
9
8
16
15
14
13
12
11
10
7
6
5
4
3
2
Connect to the Linux host through management Ethernet OR serial connector. The IP address
of the management port is assigned through DHCP. If DHCP is not available, use the serial
cable to connect to the TMG Linux Host for the first time.
Default HOSTNAME is the Linux Host serial number, which can be found on the packing slip.
Default username and password are "root":"root" to log onto the Linux OS.
Navigate to: HTTP://HOSTNAME:12358, to configure the TMG3202.
B.
C.
C) Verify Power LED = Solid Green
(Refer to Panel 3)