Tektronix MSO2000 Series Datasheet - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

Mixed Signal Oscilloscopes

MSO2000 Series, DPO2000 Series Data Sheet

Features & Bene

Key Performance Speci

cations

200, 100 MHz Bandwidth Models

2 and 4 Analog Channel Models

16 Digital Channels (MSO Series)

1 GS/s Sample Rate on All Channels

1 Megapoint Record Length on All Channels

5,000 wfm/s Maximum Waveform Capture Rate

Suite of Advanced Triggers

Ease of Use Features

Wave Inspector

Controls Provide Easy Navigation and Automated

Search of Waveform Data

FilterVu™ Variable Low-pass Filter Allows for Removal of Unwanted
Signal Noise while still Capturing High-frequency Events

29 Automated Measurements, and FFT Analysis for Simpli

Waveform Analysis

TekVPI

Probe Interface Supports Active, Differential, and Current

Probes for Automatic Scaling and Units

7 in. (180 mm) Widescreen TFT-LCD Color Display

Small Footprint and Lightweight – Only 5.3 in. (134 mm) deep and 7 lb.
14 oz. (3.6 kg)

Connectivity

USB 2.0 Host Port on the Front Panel for Quick and Easy Data Storage

USB 2.0 Device Port on Rear Panel for Easy Connection to a PC or
Direct Printing to a PictBridge

-compatible Printer

Optional 10/100 Ethernet Port for Network Connection and Video Out
Port to Export the Oscilloscope Display to a Monitor or Projector

Optional Serial Triggering and Analysis

Automated Serial Triggering, Decode, and Search Options for I

C, SPI,

CAN, LIN, and RS-232/422/485/UART

Mixed Signal Design and Analysis (MSO Series)

Automated Triggering, Decode, and Search on Parallel Buses

Multichannel Setup and Hold Triggering

Feature-rich Tools for Debugging Mixed
Signal Designs

Offering up to 200 MHz bandwidth and 1 GS/s sample rate, the
MSO/DPO2000 Mixed Signal Oscilloscope Series delivers advanced debug
features at an entry-level price. With up to 20 channels for analyzing analog
and digital signals, you can quickly

nd and diagnose problems in complex

designs. To capture long windows of signal activity while maintaining

ne timing resolution, the MSO/DPO2000 offers a deep record length of

1 Mpoints standard on all channels.
With Wave Inspector

controls for rapid waveform navigation and

automated serial and parallel bus analysis, the MSO/DPO2000
Oscilloscope Series from Tektronix provides the feature-rich tools you need
to simplify and speed debug of your complex design.

Data Sheet

Discover – A waveform capture rate of 5,000 wfm/s maximizes the probability of capturing

elusive glitches and other infrequent events.

Comprehensive Features Speed Every Stage
of Debug

The MSO/DPO2000 Series offers a robust set of features to speed every
stage of debugging your design – from quickly discovering an anomaly and
capturing it, to searching your waveform record for the event and analyzing
its characteristics and your device’s behavior.

Discover

To debug a design problem,

rst you must know it exists. Every

design engineer spends time looking for problems in their design, a
time-consuming and frustrating task without the right debug tools.

The MSO/DPO2000 Series offers complete visualization of signals,
providing fast insight into the real operation of your device. A waveform
capture rate of 5,000 waveforms per second enables you to see glitches
and other infrequent transients quickly, revealing the true nature of device
faults. A digital phosphor display with intensity grading shows the history
of a signal’s activity by intensifying areas of the signal that occur more
frequently, providing a visual display of just how often anomalies occur.

Capture – Triggering on a speci

c transmit data packet going across an RS-232 bus. A

complete set of triggers, including triggers for speci

c serial packet content, ensures you

quickly capture your event of interest.

Capture

Discovering a device fault is only the

rst step. Next, you must capture the

event of interest to identify root cause.
The MSO/DPO2000 Series provides a complete set of triggers – including
runt, logic, pulse width/glitch, setup/hold violation, serial packet, and parallel
data – to help quickly

nd your event. With up to a 1 Mpoint record length,

you can capture many events of interest, even thousands of serial packets,
in a single acquisition for further analysis while maintaining high resolution
to zoom in on

ne signal details.

From triggering on speci

c packet content to automatic decode in

multiple data formats, the MSO/DPO2000 Series provides integrated
support for a broad range of serial buses – I

C, SPI, CAN, LIN, and

RS-232/422/485/UART. The ability to decode up to two serial and/or parallel
buses simultaneously means you gain insight into system-level problems
quickly.
To further help troubleshoot system-level interactions in complex embedded
systems, the MSO2000 Series offers 16 digital channels in addition to
its analog channels. Since the digital channels are fully integrated into
the oscilloscope, you can trigger across all input channels, automatically
time-correlating all analog, digital, and serial signals.

www.tektronix.com

Mixed Signal Oscilloscopes — MSO2000 Series, DPO2000 Series

Search – I

C decode showing results from a Wave Inspector search for Address value

50. Wave Inspector controls provide unprecedented ef

ciency in viewing and navigating

waveform data.

Search

Finding your event of interest in a long waveform record can be time
consuming without the right search tools. With today’s record lengths
pushing to a million data points, locating your event can mean scrolling
through thousands of screens of signal activity.
The MSO/DPO2000 Series offers the industry’s most comprehensive
search and waveform navigation with its innovative Wave Inspector

controls. These controls speed panning and zooming through your record.
With a unique force-feedback system, you can move from one end of your
record to the other in just seconds. User marks allow you to mark any
location that you may want to reference later for further investigation. Or,
automatically search your record for criteria you de

ne. Wave Inspector

will instantly search your entire record, including analog, digital, and serial
bus data. Along the way it will automatically mark every occurrence of your
de

ned event so you can quickly move between events.

Analyze – FFT analysis of a pulsed signal. A comprehensive set of integrated analysis

tools speeds veri

cation of your design’s performance.

Analyze

Verifying that your prototype’s performance matches simulations and meets
the project’s design goals requires analyzing its behavior. Tasks can range
from simple checks of rise times and pulse widths to sophisticated power
loss analysis and investigation of noise sources.

The MSO/DPO2000 Series offers a comprehensive set of integrated
analysis tools including waveform- and screen-based cursors, 29
automated measurements, and FFT analysis. Specialized application
support for serial bus analysis is also available.

For extended analysis, National Instrument’s LabVIEW SignalExpress™
Tektronix Edition provides over 200 built-in functions including time and
frequency domain analysis, limit testing, data logging, and customizable
reports.

www.tektronix.com

Data Sheet

Wave Inspector controls provide unprecedented ef

ciency in viewing, navigating, and

analyzing waveform data. Zip through your 1 Mpoint record by turning the outer pan

control (1). Get from the beginning to end in seconds. See something of interest and want

to see more details? Just turn the inner zoom control (2).

Wave Inspector

Navigation and Search

A 1 Mpoint record length represents thousands of screens of information.
The MSO/DPO2000 Series enables you to

nd your event in seconds with

Wave Inspector, the industry’s best tool for navigation and search.
Wave Inspector offers the following innovative controls:

Zoom/Pan

A dedicated, two-tier front-panel control provides intuitive control of both
zooming and panning. The inner control adjusts the zoom factor (or zoom
scale); turning it clockwise activates zoom and goes to progressively higher
zoom factors, while turning it counterclockwise results in lower zoom factors
and eventually turning zoom off. No longer do you need to navigate through
multiple menus to adjust your zoom view. The outer control pans the zoom
box across the waveform to quickly get to the portion of waveform you are
interested in. The outer control also utilizes force-feedback to determine
how fast to pan on the waveform. The farther you turn the outer control, the
faster the zoom box moves. Pan direction is changed by simply turning the
control the other way.

Play/Pause

A dedicated

Play/Pause

front-panel button scrolls the waveform across the

display automatically while you look for anomalies or an event of interest.
Playback speed and direction are controlled using the intuitive pan control.
Once again, turning the control further makes the waveform scroll faster and
changing direction is as simple as turning the control the other way.

Search step 1: You de

ne what you would like to

nd.

Search step 2: Wave Inspector automatically searches through the record and marks each

event with a hollow white triangle. You can then use the

Previous

and

Next

buttons to

jump from one event to the next.

User Marks

Press the

Set Mark

front-panel button to place one or more marks on

the waveform. Navigating between marks is as simple as pressing the

Previous

(

←

) and

Next

(

→

) buttons on the front panel.

Search Marks

The

Search

button allows you to automatically search through your long

acquisition looking for user-de

ned events. All occurrences of the event

are highlighted with search marks and are easily navigated to, using the
front-panel

Previous

(

←

) and

Next

(

→

) buttons. Search types include

edge, pulse width/glitch, runt, logic, setup and hold, rise/fall time parallel
bus, and I

C, SPI, CAN, LIN, and RS-232/422/485/UART packet content.

www.tektronix.com

Mixed Signal Oscilloscopes — MSO2000 Series, DPO2000 Series

Digital phosphor technology enables a 5,000 wfm/s waveform capture rate and real-time

intensity grading on the MSO/DPO2000 Series.

The MSO Series provides 16 integrated digital channels enabling you to view and analyze

time-correlated analog and digital signals.

Digital Phosphor Technology

The MSO/DPO2000 Series’ digital phosphor technology provides you with
fast insight into the real operation of your device. Its waveform capture rate
of 5,000 wfm/s gives you a high probability of quickly seeing the infrequent
problems common in digital systems: runt pulses, glitches, timing issues,
and more.
Waveforms are superimposed with one another and waveform points that
occur more frequently are intensi

ed. This quickly highlights the events

With the color-coded digital waveform display, groups are created by simply placing digital

channels together on the screen, allowing the digital channels to be moved as a group.

You can set threshold values for each pod of eight channels, enabling support for up to

two different logic families.

that over time occur more often or, in the case of infrequent anomalies,
occur less often.
With the MSO/DPO2000 Series, you can choose in

nite persistence

or variable persistence, determining how long the previous waveform
acquisitions stay on-screen. This allows you to determine how often an
anomaly is occurring.

Mixed Signal Design and Analysis
(MSO Series)

The MSO2000 Series Mixed Signal Oscilloscopes provide 16 digital
channels. These channels are tightly integrated into the oscilloscope's user
interface, simplifying operation and making it possible to solve mixed-signal
issues easily.

Color-coded Digital Waveform Display

The MSO2000 Series has rede

ned the way you view digital waveforms.

One common problem shared by both logic analyzers and mixed-signal
oscilloscopes is determining if data is a one or a zero when zoomed in far
enough that the digital trace stays

at all the way across the display. The

MSO2000 Series has color-coded digital traces, displaying ones in green
and zeros in blue.

www.tektronix.com

Data Sheet

White edges indicate additional information is available by acquiring at a higher sample

rate.

The P6316 MSO probe offers two eight-channel pods to simplify connecting to your

device.

The multiple transition detection hardware of the MSO2000 Series will
show you a white edge on the display when the system detects multiple
transitions. This acts as a visual reminder that increasing the sample rate
on the next acquisition will reveal higher frequency information than your
previous settings could acquire.
The MSO2000 Series simpli

es channel setup by allowing you to group

digital waveforms and enter waveform labels by using a USB keyboard.
By simply placing digital waveforms next to each other, they form a group.
Once a group is formed, you can position all the channels contained in that
group collectively. This greatly reduces the normal setup time associated
with positioning channels individually.

P6316 MSO Probe

This unique probe design offers two eight-channel pods, simplifying the
process of connecting to the device-under-test. When connecting to square
pins, the P6316 can connect directly to 8×2 square pin headers spaced
on tenth-inch centers. When more attachment

exibility is required, you

can use the included

ying lead sets and grabbers to clip onto surface

mount devices or test points. The P6316 offers outstanding electrical
characteristics applying only 8 pF of capacitive loading with 101 k

Ω

input

impedance.

Output of DAC Signal – Notice how FilterVu™ clearly shows the noise-free steps of the

DAC in the foreground trace (yellow) which has removed all frequencies above 5.5 kHz.

FilterVu also captures and displays high-frequency glitches up to the full bandwidth of the

oscilloscope in the background trace (orange).

FilterVu™ Variable Low-pass Filter

Tired of being limited to a 20 MHz bandwidth

lter in your oscilloscope?

Simply turn on FilterVu and adjust the variable low-pass noise

lter. Unlike

other variable low-pass

lters, FilterVu

lters out the unwanted noise from

your signal while still capturing glitches and other signal details up to the full
bandwidth of the oscilloscope. It does this by showing two waveforms: a
waveform that can be

ltered (foreground waveform) and a glitch capture

waveform (background waveform).
The

ltered waveform uses a variable low-pass

lter to block out noise,

yielding a cleaner waveform to more precisely locate signal edges
and amplitude levels. The result is improved con

dence in you cursor

measurements and cleaner documentation of important signal attributes.
When the noise

lter is adjusted to the lowest available noise-cutoff

frequency, no more than 1% of high-frequency content that could cause the
oscilloscope to alias will pass through the

lter.

The glitch capture waveform shows signal details up to the full bandwidth of
the oscilloscope. The oscilloscope captures pulses as narrow as 5 ns, using
peak-detect min/max sampling, protecting you from missing unexpected
glitches or other high-frequency events.
FilterVu is ideal for repetitive, nonrepetitive, and single-shot events.

www.tektronix.com

Mixed Signal Oscilloscopes — MSO2000 Series, DPO2000 Series

Triggering on a speci

c data packet going across an I

C bus. The yellow waveform is

clock and the blue waveform is data. A bus waveform provides decoded packet content

including Start, Address, Read/Write, Data, and Stop.

Serial Triggering and Analysis (Optional)

On a serial bus, a single signal often includes address, control, data, and
clock information. This can make isolating events of interest dif

cult. The

MSO/DPO2000 Series offers a robust set of tools for debugging serial
buses with automatic trigger, decode, and search for I

C, SPI, CAN, LIN,

and RS-232/422/485/UART.

Serial Triggering

Trigger on packet content such as start of packet, speci

c addresses,

speci

c data content, unique identi

ers, etc. on popular serial interfaces

such as I

C, SPI, CAN, LIN, and RS-232/422/485/UART.

Bus Display

Provides a higher-level, combined view of the individual signals (clock, data,
chip enable, etc.) that make up your bus, making it easy to identify where
packets begin and end and identifying subpacket components such as
address, data, identi

er, CRC, etc.

Bus Decoding

Tired of having to visually inspect the waveform to count clocks, determine
if each bit is a 1 or a 0, combine bits into bytes, and determine the hex
value? Let the oscilloscope do it for you! Once you’ve set up a bus, the

Event table showing decoded Identi

er, DLC, DATA, and CRC for every CAN packet in

a long acquisition.

MSO/DPO2000 Series will decode each packet on the bus, and display the
value in hex, binary, decimal (LIN only), or ASCII (RS-232/422/485/UART
only) in the bus waveform.

Event Table

In addition to seeing decoded packet data on the bus waveform itself, you
can view all captured packets in a tabular view much like you would see in
a software listing. Packets are time stamped and listed consecutively with
columns for each component (Address, Data, etc.).

Search

Serial triggering is very useful for isolating the event of interest, but once
you’ve captured it and need to analyze the surrounding data, what do
you do? In the past, users had to manually scroll through the waveform
counting and converting bits and looking for what caused the event. With
the MSO/DPO2000 Series, you can have the oscilloscope automatically
search through the acquired data for user-de

ned criteria including serial

packet content. Each occurrence is highlighted by a search mark. Rapid
navigation between marks is as simple as pressing the

Previous

(

←

) and

Next

(

→

) buttons on the front panel.

www.tektronix.com

Data Sheet

The MSO/DPO2000 is designed to make your work easier. The bright, widescreen display

shows a long time window. Dedicated front-panel controls simplify operation. A USB host

port on the front panel allows you to easily transfer screenshots, instrument settings, and

waveform data to a memory stick.

Designed to Make Your Work Easier

Bright, Widescreen Display

The MSO/DPO2000 Series features a 7 inch (180 mm) widescreen,
TFT-LCD display for seeing intricate signal details.

Dedicated Front-panel Controls

Per-channel vertical controls provide simple and intuitive operation. No
longer do you need to share one set of vertical controls across all four
channels.

Connectivity

A USB host port on the front panel enables easy transfer of screenshots,
instrument settings, and waveform data to a USB thumb drive. The rear
panel contains a USB device port for controlling the oscilloscope remotely
from a PC or for connecting a USB keyboard. The USB device port can also
be used to print directly to a PictBridge

-compatible printer. An optional

10/100 Ethernet port enables easy connection to networks and an optional
Video Out port allows the oscilloscope display to be exported to an external
monitor or projector.

Compact Form Factor

A compact, portable form factor allows the MSO/DPO2000 Series to be
easily moved between labs and, with a depth of just 5.3 inches (134 mm),
it saves you valuable space on your test bench.

The MSO/DPO2000 Series’ compact form factor frees up valuable space on your bench or

desktop.

TekVPI probe interface simpli

es connecting your probes to the oscilloscope.

TekVPI

Probe Interface

The TekVPI probe interface sets the standard for ease of use in probing.
TekVPI probes feature status indicators and controls, as well as a probe
menu button right on the comp box itself. This button brings up a probe
menu on the oscilloscope display with all relevant settings and controls for
the probe. TekVPI probes can be controlled remotely through USB, GPIB,
or Ethernet, enabling more versatile solutions in ATE environments.

www.tektronix.com

Mixed Signal Oscilloscopes — MSO2000 Series, DPO2000 Series

NI LabVIEW SignalExpress™ Tektronix Edition is a fully interactive measurement

acquisition and analysis software developed jointly with National Instruments and

optimized for the MSO/DPO Series.

Extended Analysis

Acquiring data and measurements from the MSO/DPO2000 Series is as
simple as connecting a USB cable from the oscilloscope to your PC. Key
software applications – NI LabVIEW SignalExpress™ Tektronix Edition
LE, OpenChoice

Desktop, and Microsoft Excel and Word toolbars – are

included standard with each oscilloscope to enable fast and easy direct
communication with your Windows PC.

OpenChoice

Desktop software enables seamless connection between the oscilloscope

and your PC.

NI LabVIEW SignalExpress Tektronix Edition LE enables you to instantly
acquire, generate, analyze, compare, import, and save measurement data
and signals using an intuitive drag-and-drop user interface that does not
require any programming. The optional Professional Version offers over
200 built-in functions that provide additional signal processing, advanced
analysis, sweeping, limit testing, and user-de

ned step capabilities.

For simple tasks, the included OpenChoice Desktop enables fast and easy
communication between the oscilloscope and your PC through USB, GPIB,
or LAN for transferring settings, waveforms, and screen images.

www.tektronix.com

Data Sheet

Characteristics

Vertical System Analog Channels

Characteristic

MSO2012

DPO2012

MSO2014

DPO2014

MSO2024

DPO2024

Input Channels

Analog Bandwidth (-3 dB)*

100 MHz

200 MHz

Calculated Rise Time

3.5 ns

2.1 ns

Hardware Bandwidth Limits

20 MHz

Input Coupling

AC, DC, GND

Input Impedance

1 M

Ω

±2%, 11.5 pF ±2 pF

Input Sensitivity Range

2 mV/div to 5 V/div

Vertical Resolution

8 bits

Maximum Input Voltage, 1 M

Ω

300 V

RMS

with peaks

≤

±450 V

DC Gain Accuracy (with offset set to 0 V)

±3% for 10 mV/div to 5 V/div

±4% for 2 mV/div to 5 mV/div

Channel-to-Channel Isolation

(Any Two Channels at Equal Vertical Scale)

≥

100:1 at

≤

100 MHz

100:1 at

≤

200 MHz

Bandwidth is 20 MHz at 2 mV/div, all models.

Offset Range

Range

1 M

Ω

2 mV/div to 200 mV/div

±1 V

>200 mV/div to 5 V/div

±25 V

Vertical System Digital Channels

Characteristic

All MSO2000 Models

Input Channels

16 Digital (D15 to D0)

Thresholds

Threshold per set of 8 channels

Threshold Selections

TTL, CMOS, ECL, PECL, User De

ned

User-de

ned Threshold

Range

±20 V

Maximum Input Voltage

±40 V

Threshold Accuracy

±(100 mV +3% of threshold setting)

Maximum Input Dynamic

Range

80 V

pk-pk

(threshold setting dependent)

Minimum Voltage Swing

500 mV

pk-pk

Input Impedance

101 k

Ω

Probe Loading

8 pF

Vertical Resolution

1 bit

Horizontal System Analog Channels

Characteristic

MSO2012/2014

DPO2012/2014

MSO2024

DPO2024

Maximum Sample Rate

(all channels)

1 GS/s

Maximum Record Length

(all channels)

1 Mpoints

Maximum Duration of

Time Captured at Highest

Sample Rate

(all channels)

1 ms

Time-base Range (s/div)

4 ns to 100 s

2 ns to 100 s

Time-base Delay Time

Range

-10 divisions to 5000 s

Channel-to-Channel

Deskew Range

±100 ns

Time-base Accuracy

±25 ppm

Horizontal System Digital Channels

Characteristic

All MSO2000 Models

Maximum Sample Rate

(when using any of

channels D7-D0)

1 GS/s (1 ns resolution)

Maximum Sample Rate

(when using any of

channels D15-D8)

500 MS/s (2 ns resolution)

Maximum Record Length

(all channels)

1 Mpoints

Minimum Detectable

Pulse Width

5 ns

Channel-to-Channel

Skew

2 ns typical

www.tektronix.com

Mixed Signal Oscilloscopes — MSO2000 Series, DPO2000 Series

Trigger System

Characteristic

Description

Main Trigger Modes

Auto, Normal, and Single

Trigger Coupling

DC, HF reject (attenuates >85 kHz), LF reject

(attenuates <65 kHz), noise reject (reduces

sensitivity)

Trigger Holdoff

Range

20 ns to 8 s

Trigger Signal

Frequency Counter

Provides a higher accuracy means of identifying

the frequency of trigger signals. Trigger Signal

Frequency counter resolution is 6 digits.

Trigger Sensitivity

Characteristic

Description

Internal DC Coupled

0.4 divisions from DC to 50 MHz

0.6 divisions > 50 MHz to 100 MHz

0.8 divisions > 100 MHz to 200 MHz

External

(Auxiliary Input)

200 mV from DC to 100 MHz, 1X attenuation

Trigger Level Range

Characteristic

Description

Any Channel

±4.92 divisions from center of screen

External

(Auxiliary Input)

±6.25 V, 1X attenuation

±12.5 V, 10X attenuation

Trigger Modes

Mode

Description

Edge

Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes DC, AC, HF reject, LF reject, and noise reject.

Pulse Width

Trigger on width of positive or negative pulses that are >, <, =, or

≠

a speci

ed period of time.

Runt

Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the

rst again.

Logic

Trigger when any logical pattern of channels goes false or stays true for speci

ed period of time. Any input can be used as a clock to look for the

pattern on a clock edge. Pattern (AND, OR, NAND, NOR) speci

ed for all analog and digital input channels de

ned as High, Low, or Don’t Care.

Setup and Hold

Trigger on violations of both setup time and hold time between clock and data present on any of the input channels.

Rise/Fall Time

Trigger on pulse edge rates that are faster or slower than speci

ed. Slope may be positive, negative, or either.

Video

Trigger on line number, all lines, odd, even, or all

elds on NTSC, PAL, and SECAM video signals.

C (optional)

Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Address and Data on I

C buses up to 3.4 Mb/s.

SPI (optional)

Trigger on SS, MOSI, MISO, or MOSI and MISO on SPI buses up to 10.0 Mb/s.

CAN (optional)

Trigger on Start of Frame, Frame Type (data, remote, error, overload), Identi

er (standard or extended), Data, Identi

er and Data, End of

Frame, Missing ACK, or Bit Stuf

ng Error on CAN signals up to 1 Mb/s. Data can be further speci

ed to trigger on

≤

, <, =, >,

≥

, or

≠

a speci

data value. User-adjustable sample point is set to 50% by default.

RS-232/422/485/UART

(optional)

Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data, Rx Data, Tx Parity Error, and Rx Parity Error.

LIN (optional)

Trigger on Sync, Identi

er, Data, Identi

er and Data, Wakeup Frame, Sleep Frame, Errors such as Sync, Parity, or Checksum Errors.

Parallel (available

on MSO models

only)

Trigger on a parallel bus data value.

www.tektronix.com

Data Sheet

Acquisition Modes

Mode

Description

Sample

Acquire sampled values.

Peak Detect

Captures glitches as narrow as 3.5 ns at all sweep

speeds.

Averaging

From 2 to 512 waveforms included in average.

Roll

Scrolls waveforms right to left across the screen at

sweep speeds slower than or equal to 40 ms/div.

Waveform Measurements

Measurement

Description

Cursors

Waveform and Screen.

Automatic

Measurements

29, of which up to four can be displayed on-screen

at any one time. Measurements include: Period,

Frequency, Delay, Rise Time, Fall Time, Positive

Duty Cycle, Negative Duty Cycle, Positive Pulse

Width, Negative Pulse Width, Burst Width, Phase,

Positive Overshoot, Negative Overshoot, Peak

to Peak, Amplitude, High, Low, Max, Min, Mean,

Cycle Mean, RMS, Cycle RMS, Positive Pulse

Count, Negative Pulse Count, Rising Edge Count,

Falling Edge Count, Area and Cycle Area.

Gating

Isolate the speci

c occurrence within an acquisition

to take measurements on, using either the screen,

or waveform cursors.

Waveform Math

Characteristic

Description

Arithmetic

Add, subtract, and multiply waveforms.

FFT

Spectral magnitude. Set FFT Vertical Scale

to Linear RMS or dBV RMS, and FFT Window

to Rectangular, Hamming, Hanning, or

Blackman-Harris.

Software

Product

Description

NI LabVIEW

SignalExpress™

Tektronix Edition

A fully interactive measurement software

environment optimized for the MSO/DPO2000

Series, enables you to instantly acquire,

generate, analyze, compare, import, and save

measurement data and signals using an intuitive

drag-and-drop user interface that does not require

any programming.

Standard MSO/DPO2000 Series support for

acquiring, controlling, viewing, and exporting

your live signal data is permanently available

through the software. The full version (SIGEXPTE)

adds additional signal processing, advanced

analysis, mixed signal, sweeping, limit testing, and

user-de

ned step capabilities and is available for a

30-day trial period standard with each instrument.

OpenChoice

Desktop

Enables fast and easy communication between

a Windows PC and the MSO/DPO2000

Series. Transfer and save settings, waveforms,

measurements, and screen images. Included

Word and Excel toolbars automate the transfer

of acquisition data and screen images from

the oscilloscope into Word and Excel for quick

reporting or further analysis.

IVI Driver

Provides a standard instrument programming

interface for common applications such as

LabVIEW, LabWindows/CVI, Microsoft .NET, and

MATLAB.

eScope

Enables control of the MSO/DPO2000 Series over

a network connection through a standard web

browser. Simply enter the IP address or network

name of the oscilloscope and a web page will be

served to the browser.

www.tektronix.com

Mixed Signal Oscilloscopes — MSO2000 Series, DPO2000 Series

Display Characteristics

Characteristic

Description

Display Type

7 in. (180 mm) liquid crystal TFT color display.

Display Resolution

480 horizontal × 234 vertical pixels (WQVGA).

Waveform Styles

Vectors, Dots (In Video Trigger mode), Variable

Persistence, In

nite Persistence.

Graticules

Full, Grid, Cross Hair, Frame.

Format

YT and XY.

Maximum Waveform

Capture Rate

Up to 5,000 wfm/s.

Input/Output Ports

Port

Description

USB 2.0 High-speed

Host Port

Supports USB mass storage devices and

keyboards. One port available on front panel.

USB 2.0 High-speed

Device Port

Rear-panel connector allows for

communication/control of oscilloscope through

USBTMC or GPIB with a TEK-USB-488, and direct

printing to all PictBridge-compatible printers.

LAN Port

RJ-45 connector, supports 10/100Base-T (requires

DPO2CONN).

Video Out Port

DB-15 female connector, connect to show the

oscilloscope display on an external monitor or

projector (requires DPO2CONN).

Auxiliary Input

Front-panel BNC connector. Input Impedance

1 M

Ω

±2%. Max input 300 V

RMS

CAT II with peaks

≤

±450 V.

Probe Compensator

Output

Front-panel pins

Amplitude: 5 V

Frequency: 1 kHz

Kensington Style

Lock

Rear-panel security slot connects to standard

Kensington-style lock.

Power Source

Characteristic

Description

Power Source

Voltage

100 to 240 V ±10%

Power Source

Frequency

45 to 65 Hz (90 to 264 V)

360 to 440 Hz (100 to 132 V)

Power Consumption

80 W maximum

Optional TekVPI

External Power

Supply (119-7465-xx)

Output Voltage: 12 V

Output Current: 5 A

Power Consumption: 50 W

Physical Characteristics

Dimensions

in.

Height

180

7.1

Width

377

14.9

Depth

134

5.3

Weight

lb.

Net

3.6

7.9

Shipping

6.2

13.7

Rackmount Con

guration

Cooling Clearance

2 in. (50 mm) required on left side and rear

of instrument

Environmental

Characteristic

Description

Temperature

Operating

0 ºC to +50 ºC

Nonoperating

-40 ºC to +71 ºC

Humidity

Operating

High: 30 ºC to 50 ºC, 5% to 60% Relative Humidity

Low: 0 ºC to 30 ºC, 5% to 95% Relative Humidity

Nonoperating

High: 30 ºC to 55 ºC, 5% to 60% Relative Humidity

Low: 0 ºC to 30 ºC, 5% to 95% Relative Humidity

Altitude

Operating

3,000 meters (9,843 feet)

Nonoperating

12,000 meters (39,370 feet)

Random Vibration

Operating

0.31 G

RMS

from 5 to 500 Hz, 10 minutes each axis,

3 axes, 30 minutes total

Nonoperating

2.46 G

RMS

from 5 to 500 Hz, 10 minutes each axis,

3 axes, 30 minutes total

Regulatory

Electromagnetic

Compatibility

EC Council Directive 2004/108/EC

Safety

UL61010-1:2004;

CAN/CSA C22.2 No. 61010.1-04;

EN61010-1:2001;

Complies with the Low Voltage Directive

2004/108/EC for Product Safety.

www.tektronix.com

Data Sheet

Ordering Information

DPO2000 Models

Product

Description

DPO2012

100 MHz, 1 GS/s, 1M record length,

2-channel digital phosphor oscilloscope

DPO2014

100 MHz, 1 GS/s, 1M record length,

4-channel digital phosphor oscilloscope

DPO2024

200 MHz, 1 GS/s, 1M record length,

4-channel digital phosphor oscilloscope

MSO2000 Models

Product

Description

MSO2012

100 MHz, 1 GS/s, 1M record length,

2+16 channel mixed-signal oscilloscope

MSO2014

100 MHz, 1 GS/s, 1M record length,

4+16 channel mixed-signal oscilloscope

MSO2024

200 MHz, 1 GS/s, 1M record length,

4+16 channel mixed-signal oscilloscope

All Models Include

: One TPP0200 200 MHz, 10X Passive Probe per Analog

Channel, User Manual and Translated Front-panel Overlay, Documentation CD

(063-4118-xx), OpenChoice

Desktop Software, NI LabVIEW SignalExpress™

Tektronix Edition LE Software, Calibration certi

cates document measurement

traceability to National Metrology Institute(s) and ISO9001 Quality System

Registration, Power Cord, and a three-year warranty. Please specify power plug and

manual version when ordering.

MSO Models also Include

: One P6316 16-channel logic probe and accessory kit,

and accessory bag (016-2008-xx).

Application Modules

Modules

Description

DPO2AUTO

Automotive Serial Triggering and Analysis Module.

Enables triggering on packet-level information on

CAN bus and LIN bus as well as analytical tools

such as digital views of the signal, bus views,

packet decoding, search tools, and packet decode

tables with time stamp information.

DPO2COMP

Computer Serial Triggering and Analysis Module.

Enables triggering on packet-level information on

RS-232/422/485/UART buses as well as analytical

tools such as digital views of the signal, bus views,

packet decoding, search tools, and packet decode

tables with time stamp information.

DPO2EMBD

Embedded Serial Triggering and Analysis Module.

Enables triggering on packet-level information on

C and SPI buses as well as analytical tools such

as digital views of the signal, bus views, packet

decoding, search tools, and packet decode tables

with time stamp information. Only two-wire SPI

support available on DPO2012, MSO2012 models.

www.tektronix.com

Mixed Signal Oscilloscopes — MSO2000 Series, DPO2000 Series

Instrument Options

Power Plug Options

Option

Description

Opt. A0

North America

Opt. A1

Universal Euro

Opt. A2

United Kingdom

Opt. A3

Australia

Opt. A5

Switzerland

Opt. A6

Japan

Opt. A10

China

Opt. A11

India

Opt. A99

No power cord

Language Options*

Option

Description

Opt. L0

English manual

Opt. L1

French manual

Opt. L2

Italian manual

Opt. L3

German manual

Opt. L4

Spanish manual

Opt. L5

Japanese manual

Opt. L6

Portuguese manual

Opt. L7

Simpli

ed Chinese manual

Opt. L8

Traditional Chinese manual

Opt. L9

Korean manual

Opt. L10

Russian manual

Opt. L99

No manual

Language options include translated front-panel overlay for the selected language(s).

Service Options*

Option

Description

Opt. C3

Calibration Service 3 years.

Opt. C5

Calibration Service 5 years.

Opt. CA1

Provides a single calibration event, or coverage

for the designated calibration interval, whichever

comes

rst.

Opt. D1

Calibration Data Report.

Opt. D3

Calibration Data Report 3 years (with Opt. C3).

Opt. D5

Calibration Data Report 5 years (with Opt. C5).

Opt. R5

Repair Service 5 years (including warranty).

Probes and accessories are not covered by the oscilloscope warranty and Service Offerings. Refer to the

datasheet of each probe and accessory model for its unique warranty and calibration terms.

Recommended Probes

Probe

Description

TAP1500*

1.5 GHz TekVPI

single-ended active probe

TDP0500*

4, 6

500 MHz TekVPI 42 V differential probe

TCP0030*

120 MHz TekVPI 30 Ampere AC/DC current probe

TCP0150*

20 MHz TekVPI 150 Ampere AC/DC current probe

TCPA300/400*

Current measurement system ampli

ers

TCP305

DC to 50 MHz, 50 Ampere current probe for use

with TCPA300

TCP404XL

DC to 2 MHz, 500 Ampere current probe for use

with TCPA400

P5100A

2.5 kV, 500 MHz, 100X high-voltage passive probe

TMDP0200*

±750 V, 200 MHz high-voltage differential probe

THDP0200*

±1.5 kV, 200 MHz high-voltage differential probe

THDP0100*

±6 kV, 100 MHz high-voltage differential probe

ADA400A*

4, 5

100X, 10X, 1X, 0.1X high-gain differential ampli

Recommended Accessories

Accessory

Description

DPO2CONN

Adds Ethernet (10/100Base-T) and Video Out Port

071-2331-xx

Service Manual (English only)

TPA-BNC*

TekVPI to TekProbe BNC adapter

TEK-DPG*

TekVPI Deskew Pulse Generator Signal Source

067-1686-xx

Deskew and Calibration Fixture

196-3508-xx

Digital Probe Leadset (8 channels)

119-7465-xx

TekVPI

External Power Supply

SIGEXPTE

NI LabVIEW SignalExpress Tektronix Edition

Software – Full Version

TEK-USB-488

GPIB-to-USB adapter

ACD2000

Soft Transit Case and Front Protective Cover

200-5045-xx

Front Protective Cover

HCTEK4321

Hard Transit Case (requires ACD2000)

RMD2000

Rackmount Kit. Does not include slide-out rails.

Requires TekVPI external power adapter (119-7465-00); one per oscilloscope.

Requires TPA-BNC adapter.

Probes terminate into 50

Ω

but oscilloscope will automatically adjust to account for 1 M

Ω

input.

Requires 50

Ω

feed through termination between the oscilloscope input and the BNC cable.

Warranty

Three-year warranty covering all parts and labor, excluding probes.

Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.

Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix
Standard Codes and Formats.

www.tektronix.com

Data Sheet

Contact Tektronix:

ASEAN / Australasia

(65) 6356 3900

Austria

00800 2255 4835*

Balkans, Israel, South Africa and other ISE Countries

+41 52 675 3777

Belgium

00800 2255 4835*

Brazil

+55 (11) 3759 7627

Canada

1 800 833 9200

Central East Europe and the Baltics

+41 52 675 3777

Central Europe & Greece

+41 52 675 3777

Denmark

+45 80 88 1401

Finland

+41 52 675 3777

France

00800 2255 4835*

Germany

00800 2255 4835*

Hong Kong

400 820 5835

India

000 800 650 1835

Italy

00800 2255 4835*

Japan

81 (3) 6714 3010

Luxembourg

+41 52 675 3777

Mexico, Central/South America & Caribbean

52 (55) 56 04 50 90

Middle East, Asia, and North Africa

+41 52 675 3777

The Netherlands

00800 2255 4835*

Norway

800 16098

People’s Republic of China

400 820 5835

Poland

+41 52 675 3777

Portugal

80 08 12370

Republic of Korea

001 800 8255 2835

Russia & CIS

+7 (495) 7484900

South Africa

+41 52 675 3777

Spain

00800 2255 4835*

Sweden

00800 2255 4835*

Switzerland

00800 2255 4835*

Taiwan

886 (2) 2722 9622

United Kingdom & Ireland

00800 2255 4835*

USA

1 800 833 9200

* European toll-free number. If not accessible, call: +41 52 675 3777

Updated 10 February 2011

For Further Information.

Tektronix maintains a comprehensive, constantly expanding

collection of application notes, technical briefs and other resources to help engineers working
on the cutting edge of technology. Please visit

www.tektronix.com

Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents,
issued and pending. Information in this publication supersedes that in all previously published material.
Speci

cation and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of

Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks
of their respective companies.

06 Dec 2011

3GW-22048-3

www.tektronix.com

Ask a Question ?