PDF User Manual

 

User Manual.

Wireless Charging Station for Qi-enabled devices.

 Safety Instructions

We do not assume liability for resulting 

damages to property or personal injury if 

the product has been abused in any way 

or damaged by improper use or failure to 

observe these operating instructions. The 

warranty/guarantee will then expire.

• The product is not a toy and should be kept out 

of reach of children.

• Using an USB port on a notebook or other 

device might result in a less satisfying user 

experience.

• Do not subject the unit to excessive force, 

shock, dust, temperature or humidity. 

• Do not immerse the unit in water. If you spill 

liquid over it, dry it immediately with a soft, 

lint-free cloth.

• Do not clean the unit with abrasive or corrosive 

materials.

• Do not tamper with the unit’s internal compo-

nents. This invalidates the warranty.

• If there is reason to believe that safe operation 

is no longer possible, the device is to be put out 

of operation and secured against unintended 

operation. Safe operation is no longer possible 

if the device:

   - no longer works

   - shows visible damages

   - was stored under unfavourable conditions for 

a long period of time

   - was subject to considerable transport stress

• When disposing of this product, ensure it is 

collected separately for special treatment and not 

as normal household waste.

• Repair works must only be carried out by a 

specialist / workshop.

• Images shown in this manual may differ from 

the actual display.

• The contents of this manual may not be 

reproduced without the permission of the 

manufacturer.

EN

 Content

This pack contains one Qimini™ Pocket.

 

1. Plug the male USB of the Qimini™ into a 5V 

AC/DC adaptor or into any computer’s USB 

port. For optimal performance, we recommend 

to use a 5V USB port able to provide up to 2A. 

2. Place any Qi-enabled device on the 

Qimini™. You are ready to charge your device.

 Instructions

 Trademark

Qimini™ is a trademark of Tektos Ltd registered in Hong Kong and other countries.

 Disposal

Disposal of waste electrical and electronic 

equipment.

In order to preserve, protect and improve 

the quality of the environment, protect 

human health and utilise natural resources 

prudently and rationally, the user should return 

unserviceable product to relevant facilities in 

accordance with statutory regulations.

The crossed-out wheeled bin indicates the 

product needs to be disposed separately and 

not as municipal waste.

 EU Declaration of Conformity

 FCC Compliance Statement

Hereby, Tektos Limited, declares that the 

provided Wireless Charger Station (Model: 

QIMP0B is in conformity with the requirements 

of Directive 1999/5/EC.

 

A copy of the signed and dated Declaration of 

Conformity is available on request.

Changes or modifications not expressly appro-

ved by the party responsible for compliance 

could void the user’s authority to operate the 

equipment.

This equipment has been tested and found 

to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable 

protection against harmful interference in a resi-

dential installation. This equipment generates, 

uses and can radiate radio frequency energy 

and, if not installed and used in accordance with 

the instructions, may cause harmful interference 

to radio communications. However, there is no 

guarantee that interference will not occur in a 

particular installation.

If this equipment does cause harmful interfe-

rence to radio or television reception, which 

can be determined by turning the equipment off 

and on, the user is encouraged to try to correct 

the interference by one or more of the following 

measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equip-

ment and receiver.

-- Connect the equipment into an outlet on a 

circuit different from that to which the receiver 

is connected.

-- Consult the dealer or an experienced radio/TV 

technician for help.

This device complies with Part 15 of the FCC 

Rules. Operation is subject to the following two 

conditions: (1) this device may not cause harm-

ful interference, and (2) this device must accept 

any interference received, including interference 

that may cause undesired operation.

This equipment complies with FCC radiation 

exposure limits set forth for an uncontrolled

environment. This equipment should be installed 

and operated with a minimum distance of 20cm

between the radiator & your body. This transmit-

ter must not be co-located or operating in

conjunction with any other antenna or 

transmitter.

 

 Warning

 Maintenance

To reduce the risk of interference with other electrical equipment:

- Consult your doctor or device manufacturer if you have a pacemaker or other implanted electrical device.

- Do not place your phone on the charger and plug it into the USB port simultaneously.

When a product interferes with Qimini Pocket, please disconnect the USB plug.

No software update needed.

 

myqimini.com