Full Text Searchable PDF User Manual
teknion
hiSpace
user instruc
ti
ons
hiSpace™ height-adjustable tables support dynamic,
multi-functional spaces that easily transition as new
needs arise, enabling users to adjust tables to fit the
task at hand. Height adjustment permits seated or
standing work and allows for a healthy variety of
postures throughout the day.
hiSpace is highlighted by a signature square leg profile,
C-Leg design and electric height-adjustment range. A
digital display switch with three memory settings is
standard. hiSpace is also available in freestanding
and stage-integrated versions for use with Teknion’s
upStage™ furniture system.
hiSpace
move to a memory position
Press and hold the saved memory
position button (1, 2 or 3) ‒ the
table will automatically go up or
down to the saved position and stop
once it reaches the preset height.
change the display units
To switch the display between
inches or centimeters, press and
hold the M button while simultan-
eously pressing and holding the
▼
button for 10 seconds.
verification of display
and table height
Adjust the table to the lowest posi-
tion and measure the height. Press
and hold the M button while
simultaneously pressing and holding
the
▲
button for 10 seconds.
The first # will flash. Using the
▲
or
▼
button, set the first digit. Press
M again and the second # will
flash. Repeat to set the second and
third digits.
initialization procedure
Press and hold the up
▲
and
down
▼
buttons together for
least 10 seconds ‒ the table
will begin to move down at
half speed.
Continue to hold both
▲
and
▼
buttons together ‒ table will
move to the lowest position and
either rebound slightly or click.
Initialization is complete.
move up and down
To move the table up, press
and hold the
▲
button.
To move the table down, press
and hold the
▼
button.
set to a memory position
Move the table to the desired table
height to be saved. Press and release
the M button. Then press the
desired memory position button (1,
2 or 3) within 10 seconds.
locking a lowest position
Adjust the table to the lowest
desired height. Press and hold the
M button while simultaneously
pressing and holding the 1 button
for 10 seconds. The letter L will
display, confirming the position has
been locked and the table will not
adjust lower than this height.
unlocking a lowest position
Adjust the table to the lowest
desired height. Press and hold the
M button while simultaneously
pressing and holding the 2 button
for 10 seconds. This will unlock the
set lowest height position.
troubleshooting
q
-
The table will not adjust
a
-
Check that the power is connected
properly at the control box and at the outlet.
Re-initialize the table. If there is still no
response, please contact your supplier.
q
-
The table moves slowly
a
-
Check that the power is connected
properly at the control box and at the outlet.
Re-initialize the table. If there is still no
response, please contact your supplier.
q
-
The table moves in the wrong direction
a
-
Re-initialize the table. If there is still
no response, please contact your supplier.
q
-
The table moves up on its own
a
-
Press the up button to stop the table
from moving. Re-initialize the table. If
there is still no response, please contact
your supplier.
q
-
The table moves down on its own
a
-
Check if the weight on the table
exceeds 200lbs (90kg). If so, remove items
to reduce weight maximum to 200lbs
(90kg). Re-initialize the table. If there
is still no response, please contact your
supplier.
ng
ng
www.teknion.com
in canada
1150
Flint Road
Toronto, Ontario
m3j
2j5
Canada
Tel
866
.teknion
866.835.6466
in the usa
350
Fellowship Road
Mt Laurel, New Jersey
08054 usa
Tel
877
.teknion
877.835.6466
other offices located in
Europe, South and Central America,
Middle East, Asia and Russia
For regional contact information
go to www.teknion.com
can ⁄us ⁄int
July 2018
©Teknion 2018
®, ™ trade marks of Teknion Corporation
and/or its subsidiaries or licensed to it.
Patents may be pending.
Printed in Canada.