Full Text Searchable PDF User Manual
FRONT PANEL FUNCTIONAL
1-
On-Off Switch :
for use to turn on and turn off of the device
2-
Sat Select Button :
for use transition to the satellite receivers
3-
Signal Light :
showing signal status of the satellite receiver you chosen
4
Power Light :
light indicator the operating status of device
5-
Display :
2 x 4 Digit LED indicator
6-
OK Button :
to confirm the changes you made
7-
/
Left
– Right Button :
for use to volume leveling and
use for to choose left right
8-
/
Up
– Down Button :
for use to channel changes and use for the choose up down
9-
Menu Button :
for use to make some changes in the satellite receivers menu
10-
3.6 “ TFT LCD Screen :
you can monitor the process while you are doing
1-
On-Off Switch :
for use to turn on and turn off of the device
2-
Sat Select Button :
for use transition to the satellite receivers
3-
Signal Light :
showing signal status of the satellite receiver you chosen
4
Power Light :
light indicator the operating status of device
5-
Display :
2 x 4 Digit LED indicator
6-
OK Button :
to confirm the changes you made
7-
/
Left
– Right Button :
for use to volume leveling and
use for to choose left right
8-
/
Up
– Down Button :
for use to channel changes and use for the choose up down
9-
Menu Button :
for use to make some changes in the satellite receivers menu
10-
0.08 mA 12 V Cooling Fan :
for use to cooling of the device.
REAR PANEL FUNCTIONAL SPESIFICATIONS
Rear Panel Connection Points
1-
IF Input
:
you can connect the cables from LNB or
satellite multiswitches.
2-
RS 232
:
you can upgrade your receiver with this input
3-
Audio :
you can make stereo audio output
4-
Video :
you can make high quality video output
5-
Fan :
fan is cooling and ventilating of device
6-
Fuse :
to prevent the electrical malfunction there is a
fuse in device
7-
AC 220 :
Power unit
CONNECTION TYPES
T
TA 35 CATV PUSH-PULL
LINE AMPLIFIER
TCM 8800 L SPECIFICATIONS
Professional solution for the distribution of the satellite signal
•
8 Channel QPSK demodulator,Professional 19” standart, with
suitable Mechanical structure long lasting use
•
You can set your receiver with Sat Select button from the front
panel
•
LED display indicator for every unit in front panel
•
You can set the sound as mono-stereo for every channle
independently
•
You can supply voltage from the 1. and 8. Module
•
You can add channel manually with Video PID and Audio PID
•
Software upgradable with RS 232 connection
•
Compatible with the one side band and double side band
modulator
•
You can monitor the internal temperature continuously
•
90/270 VAC On-Off Switch power supply
•
Auto cooling system
•
3.6 “ TFT LCD Screen
•
You can use this device in buses,ships and central satellite
systems safely and without any issues
TCM 8800 F SPECIFICATIONS
Professional solution for the distribution of the satellite signal
•
8 Channel QPSK demodulator,Professional 19” standart, with
suitable Mechanical structure long lasting use
•
You can set your receiver with Sat Select button from the front
panel
•
LED display indicator for every unit in front panel
•
You can set the sound as mono-stereo for every channle
independently
•
You can supply voltage from the 1. And 8. Module
•
You can add channel manually with Video PID and Audio PID
•
Software upgradable with RS 232 connection
•
Compatible with the one side band and double side band
modulator
•
You can monitor the internal temperature continuously
•
90/270 VAC On-Off Switch power supply
•
Auto cooling system
•
You can use this device in buses,ships and central satellite
systems safely and without any issues
MOUNTING
You have to fix the device first from the assembly slots in front panel
of device
INSTALLATION
Dish Installation
You can plug in the LNB cable or multiswitch cable directly to this
devices 8 Sat IF Input in rear panel
•
Video
– Audio Installation
There is 8 video output in rear panel of device and you can
separately out the video from this outputs to the RF modulator
Also there is 8 audio output in rear panel of device and you can
separately out the audio from this outputs to the RF modulator
Your installation will be done when you finish this process
.
SETTINGS
Power Switch (On/Off Button ) :
If you are sure you have completed the
process you can switch on the Front
panel and then you will see the systems
working.
Sat Select Button :
Enter the number of receiver you want to
tune with Sat Select Button from in the
front panel of device
Sample :
select. to
SAT 7
.
Menu Button :
this button will show you
the main menu or the satellite
receivers menu you choosed
SETTINGS
OK Button :
when you make changes in this
device to confirm the changes you have to
press this button
/
UP/Down Button :
you can change channel or
move to cursor up and down in menu to pressing
these buton in front panel or the remote control
/
Left/Right Button :
you can do volume leveling or move to
cursor left and right in menu to pressing
these buton in front panel or the remote
control
•
Signal Light Indicator :
If there is good signal this light will be on.
Power Light Indicator :
If you connected the device correctly and if there is no
electrical problem this light will be on
SETTINGS
2 x 4 Digit Display :
It will show numerically the satellite and channel you choosed
3,6’’ TFT LCD Renkli Ekran :
you can monitor everything you have
done in this LCD screen
Note :
there is no monitor in the
TCM 8800 F,but you can connect any
television or screen to monitor what
you have done
•
0.08 mA Cooling Fan :
all this satellite receivers working in
high performance because of this auto
cooling fan
When you finish the setup process
pressing the Sat Select Button you
have to close the system with OFF
option
Note :
If you dont do any process in 30 sec. The device will be
automatically closed
USİNG FAULTY
Read the users manual carefully and follow the instructions
step by step. If you cant fix the problem look at this table. If
you stil cant fix the problem contact with technical Services.
Problems
Solutions
Be sure about the power connection and
1.
Not working :
check on/off switch
C
heck the yellow color video inputs
2.
No Video :
in rear panel
Check the red and white color audio inputs
3.
No Audio :
in rear panel
4.
No Signal :
Check the LNB cable and connection
Check the fan working or not,if its not contact
5.
Over Temperature:
with technical Services
WARRANTY OBLIGATION
ISSUES MUST BE CONSIDERED
1-
Warranty is void if you try to change the original number on
label and warranty paper
2-
Anyone should not interfere of the device repair except for
authorized personel.
3-
Only technical Services determine the repair location and
ways.
4-
Warranty is void under this conditions write below
a)
If connected an other external device.
b)
Malfunctions caused by mains voltage.
c)
Equipment failures caused by installation
c)
Malfunctions during the transfer of device.
e)
Malfunctions caused by misuse.
f)
Malfunctions caused by the natural disasters.
5-
warranty paper have to enclose the invoice number and
invoice date and serial number.
