Full Text Searchable PDF User Manual

: EC60
MODLE

Safety Reminding and Maintenance
A dedicated power protection air switch must be
used.
For indoor use only
Never wash the ceramic cooker with water.
Never have the ceramic cooker hob to work
without food inside, otherwise its operational
performance may be affected and danger may
happen.
Always open sealed containers, such as cans,
before heating them, otherwise they may
explode.
When a cooking zone has been on a long time
the surface remains hot for some time
afterwards – so do not touch the ceramic
surface.
From time to time check that nothing (eg glass,
paper, etc) is obstructing the air intake beneath
the ceramic hob.
2

Do not leave metallic objects such as knives,
forks,spoons and lids on the hob as they may
get hot.
Never use the ceramic hob near another
appliance which generates a high temperature,
such as a gas cooker or a paraffin heater.
Do not store detergents or flammable meterials
beneath the hob.
If the surface of the hob is cracked, swith off the
appliance to avoid the possibility of electric
shocks.
Do not place rough or uneven appliances, which
may damage the ceramic surface.
Clean the ceramic hob regularly to stop foreign
objects from getting into the fan and preventing
the appliance from working properly.
WARNING: The appliance and its accessible
parts become hot during use. Care should be
taken to avoid touching heating elements.
Children under 8 Year of age must be kept
away from the appliance unless they are
continuously supervised.
3

This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved.
Children must not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision
WARNING: Unattended cooking on a hob with
fat or oil can be dangerous and may result in
fire.
NEVER try to extinguish a fire with water, but
switch off the appliance and then cover flame
e.g. with a lid or a fire blanket.
WARNING: Danger of fire: do not store items on
the cooking surfaces.
Do not use a steam cleaner for cleaning
operations
4
After use, switch off the hob element by its
control. Do not rely on the pan detector.

This appliance is not intended to be operated by
means of an external timer or separate
remote-control system.
The means for disconnection must be
incorporated in the fixed wiring in accordance
with the wiring rules.
The instructions state the type of cord to be
used, taking into account the temperature of the
rear surface of the appliance.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
CAUTION: In order to avoid a hazard due to
inadvertent resetting of the thermal cutout, this
appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched
on and off by the utility.
5
Clean the ceramic cooker hob on a regular basis
to prevent foreign matters from entering the fan
thus influencing the normal operation.

Working Principle
Product Introduction
Dear customer,
Thank you for purchasing the the ceramic cooker hob.
Our product can serve you many years to your satisfaction.
Please read this instructions manual carefully before using and installation.
Keep it in a good place after reading for future reference.
Thank you again for your purchase of the ceramic cooker hob, and wish
you to enjoy the pleasure brought about by it.
of cuisine demands because of resistance wire heating, mechanical
computerized control, really the optimal choice for modern families.
The ceramic cooker hob centers on customers and adopts personalized
design. The hob has safe and reliable performances, making your life
comfortable and enabling to fully enjoy the pleasure from life.
6
resistance wire heating, and adjust the output power by the power regulation
with the mechanical control knobs
The
mechanical ceramic cooker hob can meet different kinds
EC60
The
mechanical ceramic cooker hob directly employs
EC60

7
Safety
Residual heat indicators
After using the hob, waste heat remains in the heating area. The
indicator lamp will light up, warning to be away from the heating area.
Installation
Selection of installation equipment
Drill holes on the table surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50 mm space shall
be preserved around the hole.
Be sure the thickness of the table surface is at least 30mm. Please select
heat-resistant table material to avoid larger deformation caused by the heat
radiation from the hotplate.
As shown in Figure (1)
50mm mini
50mm mini
50mm mini
50mm mini
High temperature protection
The temperature sensor mounted on the radiant electric the temperature
inside the cooker from time to time. When an excessive temperature is
detected, the cooking plate will be directly disconnected and stop power
output.
560 mm
490 mm

Note: The safety distance between the
ceramic hob
and the cupboard
above the hotplate should be at least 760mm.
Air intake
Figure (2)
mini 50 mm
mini 20 mm
8
Under any circumstances, make sure the ceramic cooker hob is well
ventilated and the air inlet and outlet are not blocked.
Ensure the ceramic cooker hob is in good work state. As shown in
Figure (2)
Fix the hob on the table by screw four brackets on the bottom of hob
(see picture) after installation. Adjust the bracket position to suit for
different table top thickness.
screw
bracket
base
screw hole
mini 760 mm

9
Cautions
The ceramic cooker hob must be installed by qualified personnel
or technicians. We have professionals at your service. Please
never conduct the operation by yourself.
The ceramic cooker hob shall not be mounted to cooling equipment,
dishwashers and rotary dryers.
The ceramic cooker hob shall be installed such that better heat radiation
can be ensured to enhance its reliability.
The wall and induced heating zone above the table surface shall
withstand heat.
To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
A steam cleaner is not to be used.
A board is must to be installed underneath the hob.
4.
5.
1.
2.
3.
6.
7.
If the cable is damaged or to be replaced, the operation must be
carried out by the after-sale agent with dedicated tools to avoid
any accidents.If the appliance is being connected directly to the
mains an omnipolar circuit-breaker must be installed with a
minimum opening of 3mm between contacts. The installer must
ensure that the correct electrical connection has been made and
that it is compliant with safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised
technicians only.
Figure (3)
Power line connection
The socket shall be connected according to the relevant standard
black
green-yellow
PE
or connected to a single-pole cut-out. 30 minimum supply.
The method of connection is shown in Figure (3):

The ceramic cooker hob appearance
Schematic diagram of the control panel
10
Power
regulating knob
Power cord
Ceramic glass
knob
High temperature
Indicator lamp

11
The power of each heating zone are shown as follow:
Left rear Right rear
1200W 1800W
1800W
Left front
Right front
Heating zone
Power
Operation Instructions:
1200W
Instructions for Use
Put the pot in the center of the heating zone.
After the power supply is connected,put the pot on the center of the ceramic
plate,Turn the knob clockwise or anticlockwise to turn on the hob.
Shut down :
After using,please turn the knob to "OFF",the hob will stop
heating.
High temperature indicator lamp:
When the glass plate is too hot,the high temperature indicator lamp will light
up,don't touch the glass plate until the indicator lamp goes out.

12
Light
Clean with hot water and
damp sponge
Cleaning sponge
Accumulation
of dirt
Clean with hot water and
abrasive sponge
Special cleaning
sponge for ceramic
glass
Rings and lime
crumbles
Sweetmeat,
melt aluminum
or plastics
Apply white vinegar to the
polluted zone, then wipe it
dry with soft cloth or a
special article available in
local markets
Use a scraper suitable for
ceramic glass (to protect
glass, a silicon product is
preferred) to remove
residuals
Special adhesive for
ceramic glass
Special adhesive for
ceramic glass
Cleanness and Maintenance
You can easily clean the surface of the ceramic cooker hob if
following the methods given in the table.
Hint: please disconnect power before the cleaning.
Type of contam-
ination
Method of cleaning
Articles used for
cleaning
DISPOSAL: Do not
dispose this product
as unsorted municipal
waste. Collection of
such waste separately
for special treatment is
necessary.
This appliance is labeled in compliance with European directive
2002/96/EC for Waste Electrical and Electronic Equipment
(WEEE). By ensuring that this appliance is disposed of correctly,
you will help prevent any possible damage to the environment
and to human health, which might otherwise be caused if it were
disposed of in the wrong way.
The symbol on the product indicates that it may not be treated as
normal household waste. It should be taken to a collection point
for the recycling of electrical and electronic goods.
This appliance requires specialist waste disposal. For further
information regarding the treatment, recover and recycling of this
product please contact your local council, your household waste
disposal service, or the shop where you purchased it.
For more detailed information about treatment, recovery and
recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you
purchased the product.

Special DecIaration
All the contents in this material have been subjected to careful check.
For any mistake and omission in printing or misunderstanding of the
contents,the company keeps the right of interpretation.
Addition:any technical improvement will be placed in the revised
manual without notice;for product appearance and color is according
to the actual one
13
Maintenance Service Warranty
For any failure of the product, please contact the special
maintenance department or the customer service center.
1. There is a year’s guarantee with the our brand ceramic cooker
hob.
2. The period of warranty shall start from the date on which the invoice
is issued.
3. Any one of the following cases is without the warranty:
Damages caused by improper use, storage and maintenance of
the consumer.
Damages caused by unauthorized disassembly and repair in the
maintenance department not designated by the company.
Model of invoice and model of product maintained are not in
conformity or are altered.
Valid invoice can not be presented.
Damages caused by force majeure.
Using the ceramic cooker hob for commercial purposes.
IM EC60 091016
Global Asian Appliances HK Ltd
:01 4475261