Full Text Searchable PDF User Manual
Contour
TM
Series
Assembly Instructions
To download and print Teeter’s Contour
™
Series instructions, visit the product support page at teeter.com.
Pour télécharger et imprimer le manuel du propriétaire ComforTrak
™
, visitez la page d’assistance des produits au teeter.com
Para descargar e imprimir las instrucciones de montaje de ComforTrak
™
en español, visite teeter.com
* Specifications may vary from this image and
are subject to change without notice.
The L5 is shown here.
Your actual model may vary.
Models L3 and L5
YEAR
5
W
ARRANT
Y
FULL
EN
NEW!
Follow along with
your smartphone
to make assembly
even easier!
For gravity-assisted stretching and decompression
Owner’s Manual
(attached to the equipment)
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . 1
User Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Prepare to Invert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 4
Inverting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 – 5
Storage & Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Get the Most Out of Your Teeter . . . . . . . . . . . . . . . . . . . . . 6
Assembly Instructions
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . 1
Items for Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Understanding Your Inversion Table . . . . . . . . . . . . . . . . . .3
Safety Warning Labels & Product Specifications . . . . . 4
Before Beginning Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assembly Steps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 – 11
Before Inverting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Warranty Terms & Registration. . . . . . . . . . . . . . . . . . . . . . .13
Congratulations on your purchase of a Teeter Contour™ Series Inversion Table! In order to utilize this product to its fullest extent, it
is critical that you follow the assembly instructions, read and fully understand the Owner’s Manual attached to the equipment, and
review the Getting Started DVD prior to using your new Teeter Inversion Table.
Teeter Decompression Devices are multiple user, reusable devices for home use, intended to provide traction to the spine while
stretching the para-spinal muscle and soft tissues. The devices provide non-powered traction and are meant for use by adults.
Use of FDA-Cleared Teeter Decompression Devices is indicated for the following conditions: back pain, muscle tension, degenerative
disc disease, spinal degenerative joint disease, spinal stenosis, herniated disc, spinal curvature due to tight muscles, sciatica, muscle
spasm, and facet syndrome.
Follow the assembly steps with your smartphone! With a QR code reader app, scan the barcodes next to each assembly step
to watch the corresponding video to guide you through the instructions.
To register your product warranty, go to
teeter.com/Support/Warranty-Registration
If you have any questions concerning assembly or if any parts are missing,
DO NOT RETURN THE ITEM TO THE STORE
OR CONTACT THE RETAILER.
Our dedicated customer service experts can help! Contact Teeter Customer Service
at
800.847.0143
, or via online forms or Live Chat at
teeter.com
.
Get more from your inversion sessions by downloading the TeeterLink™ app to your phone to track
usage and pain levels, get reminders and customized guidance, access support, and more! Scan the
code or search TeeterLink in your app store to get started!
SAVE THESE INSTRUCTIONS
1
WARNING
!
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE
BEFORE YOU BEGIN:
Review all steps before beginning assembly and read all precautions before using the inversion table.
Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity.
FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH.
To reduce the risk of injury:
• Read and understand all the instructions, review all other accompanying documents, and inspect the equipment before using the
inversion table. It is your responsibility to familiarize yourself with the proper use of this equipment and the inherent risks of inversion
if these instructions are not followed, such as falling on your head or neck, pinching, entrapment, equipment failure, or aggravating a
pre-existing medical condition. It is the responsibility of the owner to ensure that all users of the product are fully informed about the
proper use of the equipment and all safety precautions.
•
DO NOT
use until approved by a licensed physician. Inversion is contraindicated in any medical or health condition that may be made
more severe by an elevation of blood pressure, intracranial pressure or mechanical stress of the inverted position, or that may impact
your ability to operate the equipment. This may include injury or illness, but also the side effects of any drug or supplement (prescribed
or over-the-counter). Specific conditions may include, but not be limited to:
·
Any condition, neurological or otherwise, which results in unexplained tingling, weakness or neuropathy, seizure, sleep disorder,
lightheadedness, dizziness, disorientation, or fatigue, or impacts strength, mobility, alertness, or cognitive ability;
·
Any brain condition, such as trauma, history of intracranial bleed, history or risk of TIA or stroke, or severe headaches;
·
Any condition of the heart or circulatory system, such as high blood pressure, hypertension, increased risk of stroke, or use of
anticoagulants (including high doses of aspirin);
·
Any bone, skeletal or spinal cord condition or injury, such as significant spinal curvature, acutely swollen joints, osteoporosis,
fractures, dislocations, medullary pins or surgically implanted orthopedic supports;
·
Any eye, ear, nasal or balance condition, such as trauma, history of retinal detachment, glaucoma, optic hypertension, chronic
sinusitis, middle or inner ear disease, motion sickness, or vertigo;
·
Any digestive or internal condition, such as severe acid reflux, hiatal or other hernia, gallbladder or kidney disease;
·
Any condition for which exercise is specifically directed, limited or prohibited by a physician, such as pregnancy, obesity,
or recent surgery.
•
ALWAYS
be certain the Ankle Lock System is properly adjusted and fully engaged, and that your ankles are secure before using
the equipment. HEAR, FEEL, SEE and TEST that the Ankle Lock System is snug, close-fitting and secure EVERY TIME you use the
equipment.
•
ALWAYS
wear securely tied lace-up shoes with a flat sole, such as a normal tennis-style shoe.
•
DO NOT
wear any footwear that could interfere with securing the Ankle Lock System, such as shoes with thick soles, boots, high-tops
or any shoe that extends above the anklebone.
•
DO NOT
use the inversion table until it is adjusted properly for your height and body weight. Improper settings can cause rapid
inversion or make returning upright difficult. New users, and users who are physically or mentally compromised, will require the
assistance of a spotter. Make sure the equipment is set to your unique user settings prior to each use.
•
DO NOT
sit up or raise head to return upright. Instead, bend knees and slide your body to the foot-end of the inversion table to change
weight distribution. If locked out in full inversion, follow the instructions for releasing from the locked position before returning upright.
•
DO NOT
continue using the equipment if you feel pain or become light-headed or dizzy while inverting. Immediately return to the
upright position for recovery and eventual dismount.
•
DO NOT
use if you are over 6 ft 6 in (198 cm) or over 300 lbs. (136 kg). Structural failure could occur or head/neck may impact the floor
during inversion.
•
DO NOT
allow children to use this machine. Keep children, bystanders, and pets away from machine while in use. The inversion table
is not intended for use by persons with reduced physical, sensory or mental capabilities, unless they are given supervision and
instruction concerning use of the machine by a person responsible for their safety.
•
DO NOT
store the inversion table upright if children are present. Fold and lay the table on the floor.
DO NOT
store outdoors.
•
DO NOT
use aggressive movements, or use weights, elastic bands, any other exercise or stretching device or non-Teeter
®
attachments
while on the inversion table. Use the inversion table only for its intended use as described in this manual.
•
DO NOT
drop or insert any object into any opening. Keep body parts, hair, loose clothing and jewelry clear of all moving parts.
•
DO NOT
use in any commercial, rental or institutional setting. This product is intended for indoor, home-use only.
•
DO NOT
operate equipment while under the influence of drugs, alcohol, or medication that may cause drowsiness or disorientation.
•
ALWAYS
inspect the equipment prior to use. Make sure all fasteners are secure.
•
ALWAYS
replace defective components immediately and/or keep the equipment out of use until repair.
•
ALWAYS
position equipment on a level surface and away from water or ledges that could lead to accidental immersion or falls.
• Refer to additional warning notices posted on the equipment. If a product label or Owner’s Manual should become lost, damaged or
illegible, contact Customer Service for replacement.
2
Items for Assembly
Items not shown to scale. Hardware drawings located on the insert inside each Hardware Kit.
FlexTechnology
™
Table
Bed Assembly
Use with Table Bed Assembly
Hardware Kit (HK1010)
NX1300
NX1400
ITEM NO. ITEM NAME
FlexTechnology
™
Table Bed Assembly
NX1300
Table Bed
HK1010
Table Bed Assembly Hardware Kit
A-Frame Base Assembly
NX1100
A-Frame
F51008
EZ-Angle Tether
(Pre-assembled to A-Frame)
Handle Assembly
NX1500
Contour Stretch
™
Handles (2)
HK1012
Handle
Assembly Hardware Kit
Crossbrace Assembly
NX1400
Crossbrace
HK1011
Crossbrace Assembly Hardware Kit
Handle Assembly
Use with Handle Assembly
Hardware Kit (HK1012)
Optional Head Pillow
Tools Provided for Assembly
IA1149
5mm Allen Wrenches
Main Shaft
with EZ-Reach™ Ankle Lock System
(Contour L3 Model Only)
NX1630
F51088
Open-Ended Wrenches
Main Shaft
with Deluxe EZ-Reach™ Ankle Lock System
(Contour L5 Model Only)
NX1620
ITEM NO. ITEM NAME
Main Shaft Assembly
NX1630
with EZ-Reach™ Ankle Lock System
(Contour L3)
NX1620
with Deluxe EZ-Reach™ Ankle Lock System
(Contour L5)
Optional Accessories
IA8105
Head Pillow
Tools Provided for Assembly
F51088
10/13mm Open-Ended Wrenches (2)
IA1149
5mm Allen Wrenches (2)
EP1128A
6mm Allen Wrench (1)
Product Support
CN1710
Getting Started DVD
CN1730
Owner’s Manual
(Contour L3)
CN1530
Owner’s Manual
(Contour L5)
Getting Started DVD
CN1710
Product Support
CN1730 (Contour L3)
CN1530 (Contour L5)
Owner’s Manual
Pre-assembled
to A-frame
A-Frame Base Assembly
with pre-assembled EZ-Angle Tether
NX1100
F51008
NX1500
Crossbrace Assembly
Use with Crossbrace Assembly
Hardware Kit (HK1011)
EP1128A
6mm Allen Wrench
IA8105
PROJECT: F5-1210
H2小枕頭
APPROVED:
FINISH:
DRAWING: Ben 2015/5/12
HARDNESS/CLASS:
UNIT: mm
SCALE:1:4
MATERIAL: 黑色PVC皮料/白色泡棉
SHEET 1 OF 1 REV.B
REV.
DESCRIPTION
REV.DATE
APP.DATE
APPROVED
F5-1210-0058 2015/5/11
DWG. NO.: F5-1210-0058
105.66
50.80
25.40
1231.90
1231.90
336.55
32.35
37.05
146.05
22.67
彩色印刷LOGO
170.69
22.35
19.05
60.00
40.0
18.70
車縫位置
魔鬼氈(勾面)
在黏扣帶上方
黏扣帶
魔鬼氈(勾面)
在上方
黑色PVC皮料 0.7 m/m
白色泡棉 25D
車縫魔鬼氈勾面
C
A
B
D
E
6
5
4
3
2
9
8
7
C
A
B
D
E
F
G
H
1
2
3
4
5
6
7
8
9
F
G
H
UNLESS OTHERWISE SPECIFIED
TOLERANCE ARE :
0 ~20
0.1
21~50
0.15
51~
4/1000
ANGLE
0.5
TITLE:
1
3
6
8
9
10
11
12
14
2
4
5
7
13
15
3
Identifying Parts and Components
Understanding Your Inversion Table
Before reading further, study the drawing below to familiarize yourself with the
important components of your Teeter Inversion Table.
1
Head Pillow
2
FlexTechnology
™
Table Bed
3
Rotation Adjustment Arm
4
Crossbrace
5
Contour Stretch
™
Handles
6
Height-Selector Locking Pin
7
De-Rattler Knob
8
Spreader Arms
9
EZ-Angle
™
Tether
10
Crossbar
11
A-Frame
12
Main Shaft
13
Ankle Lock System
14
Ankle Comfort Dial
™
15
Stability Feet
The Contour L5 is shown here.
Your actual model may vary.
4
Safety Warning Labels & Product Specifications
Important: Please review all labels and supporting materials before using your inversion table.
This drawing indicates the locations of the warning labels found on your product. If a label is missing, illegible or is removed,
contact Teeter Customer Service to request a complimentary replacement label.
Note: Image and labels below not shown at actual size.
Assembled Non-Use Dimensions:
64.0 (L) x 27.8 (W) x 61.0 in (H) (162.6 x 70.6 x 154.9 cm)
Maximum In-Use Dimensions:
83.0 (L) x 27.8 (W) x 88.0 in (H) (210.8 x 70.6 x 223.5 cm)
Storage Dimensions:
25.0 (L) x 27.8 (W) x 68.0 in (H) (63.5 x 70.6 x 172.7 cm)
Weight
(approx.)
:
L3: 82.0 lbs (37.2 kg)
L5: 80.5 lbs (36.5 kg)
27.8 in (70.6 cm)
61.0 in (154.9 cm)
64.0 in (162.6 cm)
The Contour L5 is shown here.
Your actual model may vary.
Before Beginning Assembly
5
With a QR code reader app, scan the barcodes next to each assembly step to watch the corresponding
video to guide you through the instructions.
Follow the Assembly Steps with Your Smartphone!
Unpack and Prepare Your Workspace
• If possible, set up the product at or near the space in which you intend to use it to avoid moving it later.
• Unpack all parts and support materials. Set aside packing materials and clear your work area.
• Locate the Hardware Kits, packaged with the manuals. They are labeled to correspond with the assembly process.
• The
Getting Started DVD
provides step-by-step instruction on how to assemble your product. You may find it helpful to follow along
with the DVD by watching it on either your TV or computer. The DVD is divided into the following sections:
•
Assembly
- Follow step-by-step instruction on how to assemble your inversion table.
•
User Settings
- Personalize your inversion experience by adjusting four customizable settings.
•
Use Instructions
- Learn how to test your balance and rotation control, and how to properly invert and return upright.
•
Advanced Stretching & Exercises
- Use your Teeter for rotational stretches, sit ups, squats and more!
•
BONUS Healthy Back Classes*
Get guided instruction on stretches and exercises you can do on your own to help strengthen your back and gain flexibility.
*Not available in French or Spanish.
STEP 1
Attach Support Beam to Table Bed
• Locate the Table Bed Assembly Hardware Kit (HK1010)
• Place the FlexTechnology™ Table Bed face down on the floor.
• Push down on the Support Beam so that the two holes align evenly
with the holes at the base of the Upper Support Arms (Figure 1).
• Insert the two bolts into the open holes (Figure 2).
• Hand tighten each bolt with a washer and nut (Figure 3). Use the
6 mm Allen Wrench to steady each bolt and tighten the nuts
using the 10/13 mm Open-Ended Wrench provided.
6
1
- Support Beam
2
- Upper Support Arms
3
- Rubber Spacers
FIGURE 1
FIGURE 2
FIGURE 3
2
1
3
7
STEP 2
Assemble Table Bed to A-Frame
• Position the A-Frame on the floor with the crossbar pointing down,
so that the frame is resting on the Rotation Adjustment Arms
(Figure 4).
• With the Table Bed face up and the top of the bed pointing to the
A-Frame feet, slide it on the floor between the legs of the A-Frame.
• Loosen the “de-rattler” function of the Pinlock Knobs on each Support
Housing by turning each counterclockwise (Figure 5).
• Align and insert the Rotation Adjustment Arms into the Support
Housings (Figure 6).
• Pull out both spring-loaded Pinlock Knobs at the same time then lift
up to align the Support Housings with one of the marked settings on
the Rotation Adjustment Arms (Figure 7).
NOTE: Refer to the Owner’s Manual for an explanation of the hole
settings. If you are unsure, use Setting C to start.
• Release the knobs so that they engage the same hole setting on each
side (Figure 7). Should the knobs remain locked in the “out” position,
simply rotate slightly clockwise to release (Figure 8).
• Leave the inversion table in this position for the next step.
FIGURE 5
FIGURE 6
FIGURE 7
FIGURE 8
1
- Crossbar
2
- Rotation Adjustment Arm
FIGURE 4
Loosen
Tighten
2
1
Derattler Function
: Counterclockwise to loosen, clockwise
to tighten
1
1
- Support Housing
2
- Rotation Adjustment Arms
A
B
C
Lock
Release
Pinlock Function
- Pull out, turn counterclockwise to lock,
clockwise to release
2
8
STEP 3
Attach Handles to A-Frame
• Locate the Contour Stretch
™
Assembly Hardware Kit (HK1012).
• With the open end of each handle pointing away from the A-Frame
feet, place each Handle fitting over the A-Frame legs, aligning with
the pre-drilled holes (Figure 9).
• Insert the bolts from the inside and secure with the nuts on the
outside, tightening with the Allen Wrenches provided (Figure 10).
The Contour L5 is shown here. Your actual model may vary.
FIGURE 9
FIGURE 10
9
• Locate the Crossbrace Hardware Kit (HK1011)
• To stand the inversion table upright, first move the A-Frame onto
its side (Figure 11), and then carefully lift it up onto its feet (Figure 12).
• Use the handles to open the A-Frame wide enough so that it is stable
and can stand upright on its own (Figure 13).
• Align the holes in the Crossbrace with the last hole on the Rotation
Adjustment Arms (Figure 14).
• Insert the Chicago Posts and secure with the Chicago Screws,
tightening with the Allen Wrenches provided (Figure 15).
NOTE:
Due to the tapered style of the Chicago Post, it may not sit flush
against the Crossbrace.
• Turn the Pinlock Knobs clockwise to re-engage the “de-rattler” function
(Figure 16).
STEP 4
Attach Crossbrace to Rotation Adjustment Arms
The Contour L5 is shown here. Your actual model may vary.
FIGURE 13
FIGURE 16
FIGURE 15
FIGURE 14
FIGURE 11
FIGURE 12
10
• Ensure that the A-Frame is fully open and locked at the
Spreader Arms (Figure 17).
• Rotate the Table Bed into its use position (Figure 18).
• Loosen the Main Shaft De-Rattler Knob at the base of the
Main Shaft Housing.
NOTE:
The De-Rattler Knob is an optional feature that prevents a slight
shift when you invert. Product security is not compromised if you
choose not to tighten the knob.
• With the Height Adjustment Settings on the Main Shaft facing up,
slide the end of the Main Shaft into the Main Shaft Housing at the
base of the Table Bed.
• Pull out the Height-Selector Locking Pin to allow the Main Shaft to
slide in further and release in the desired height setting. Refer to the
Owner’s Manual for more information on selecting your height setting.
• The Main Shaft MUST REST against the Crossbar of the A-Frame
(Figure 19).
NOTE:
The Crossbar prevents the Table Bed from rotating forward
when the user steps on the Ankle Comfort Dial. If the Main Shaft does
not rest on the Crossbar as shown in Figure 19, then the Table Bed has
been assembled backwards onto the A-Frame. This must be corrected
before use.
STEP 5
Assemble Main Shaft to Table Bed
The Contour L5 is shown here. Your actual model may vary.
FIGURE 17
FIGURE 18
FIGURE 19
1
- De-Rattler Knob
2
- Main Shaft Housing
3
- Height-Selector Locking Pin
2
1
3
1
- Crossbar
2
- Proper Resting Position
2
1
11
STEP 6
Attach Angle Tether & Head Pillow
Attach Angle Tether
• The tether will come pre-assembled to the A-Frame.
• Unfold the adjustable tether and clip it to the U-Bar on the
underside of the Table Bed (Figure 20).
• Slide the buckle to lengthen or shorten the strap depending on
your desired maximum angle of inversion.
Attach Head Pillow
Attach the Head Pillow by securing the Velcro Straps through the
elongated slots in the Table Bed (Figure 21), which allow the pillow
to shift with the user when in use. You may also customize the
position depending on your preference.
LENGTHEN
SHORTEN
The Contour L5 is shown here. Your actual model may vary.
EZ-Angle Tether Accessory
Some models may come with the EZ-Angle Tether, embroidered
with color-coded angle markers at 20
°
(GREEN), 40
°
(ORANGE),
or 60
°
(RED). Simply slide the buckle so its center aligns with your
desired color setting.
FIGURE 20
FIGURE 21
FIGURE 22
12
The Contour L5 is shown here. Your actual model may vary.
Before Inverting
Ensure Owner’s Manual is Attached
The Owner’s Manual contains important information on how to use
your Teeter Inversion Table, including how to personalize the user
settings, properly secure and release the Ankle Lock System, and test
and adjust the rotation control.
• If not already attached, thread the provided metal chain through
the pre-punched hole in the upper corner of the Owner’s Manual.
• Secure the chain to the A-Frame through the designated hole in the
Hinge Plate (Figure 24). Allow the Owner’s Manual to hang freely
on the outside of the A-Frame Spreader Arms so it doesn’t interfere
with the rotation of the Table Bed.
IMPORTANT:
Once attached to the A-Frame,
DO NOT
remove the
Owner’s Manual. It should remain permanently attached to your
inversion table to serve as a reference for all users in regards to proper
adjustment and use of the equipment.
WARNING
!
View the Remainder of the DVD
The Getting Started DVD is a helpful supplement to the Owner’s Manual,
with easy-to-follow instructions on user settings, how to invert, storage
and maintenance, and even stretching and exercises you can do with
your Teeter.
Read the Owner’s Manual thoroughly before using your
Teeter Inversion Table. Improper settings could result
in serious injury or death!
FIGURE 24
HOW TO SUBMIT YOUR REGISTRATION:
Step 1
Fill out this information for your own records.
Step 2
Go online to teeter.com to register your warranty.
Handling and transportation costs related to product warranty service only are covered by this warranty. This warranty does
not cover damage resulting from improper handling, assembly, or installation, repairs made by others, accident, misuse,
or abuse. Under no circumstances shall Teeter, or any other party involved in the sale of this product, have any liability for
incidental or consequential damage arising from breach of an express or implied warranty on any Teeter product.
EXCEPT AS SET FORTH ABOVE, NO WARRANTY IS GIVEN WITH RESPECT TO ANY TEETER PRODUCT, AND ALL EXPRESS
WARRANTIES ARE DISCLAIMED.
This warranty shall be governed by the laws of the State of Washington, USA. To
the extent this warranty is found not to be enforceable, it shall be deemed revised to the extent necessary to make it
enforceable. This warranty and any controversy or claim arising out of this warranty or its interpretation shall be governed
by the laws of the State of Washington, USA. Any controversy or claim arising out of or relating to this warranty, its
interpretation, or any alleged breach thereof, which cannot be amicably settled between Teeter and the owner within
sixty (60) days of written notice by the aggrieved party to the other, shall be finally settled by arbitration submitted to
three (3) arbitrators selected from the panels of the arbitrators of the American Arbitration Association located closest to
Teeter’s principal place of business.
Some states do not allow the exclusion of incidental or consequential damage from a warranty, so the above limitation or
exclusion may not apply to you. Some states do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which may
vary from state to state.
PLEASE RETAIN THIS FOR YOUR RECORDS
Date of Purchase
Product & Model
Dealer Name
Serial No.
YEAR
5
W
ARRANT
Y
FULL
During the period starting with the day of retail purchase and continuing for five (5) years, Teeter
extends to the owner a repair and replacement warranty against manufacturing defects in
materials, workmanship, fabrics and padding. Teeter will repair or replace any such defect and will
pay the costs of all parts, labor and transportation. If a repair or replacement is not commercially
practical or cannot timely be made, then Teeter will, at the original Purchaser’s option, replace
with a comparable product or refund the purchase price.
FULL 5 YEAR WARRANTY
If you are unable to go online, you can request a warranty card to be mailed to you by calling Customer Service at 800-847-0143.
Please DO NOT mail this to Teeter.
13
The Teeter warranty set forth below and on Teeter’s website applies to US and Canadian customers only.
For international customers, please consult your local distributor for warranty information which will vary
depending on country.
If you have any trouble assembling the equipment, or questions
about its use, please contact customer service.
USA:
800-847-0143 or info@teeter.com
International:
info@teeterintl.com
Check out the selection of products and accessories
available at teeter.com!
Roger Teeter
Founder & Innovator
U.S. and Foreign Patents Apply. Teeter and Teeter logo are registered trademarks of Teeter. Specifications subject to change without notice.
© COPYRIGHT 2017 Teeter. International Law Prohibits Any Copying. CN1035 0217-4
Medical Device Safety Service
GmbH
Schiffgraben 41
30175 Hannover
Germany
Tel. +49 511 62628630
EC
REP
International:
Teeter International, Ltd.
Gor-Ray House
758 Great Cambridge Rd
Enfield
Middlesex EN1 3GN
United Kingdom
teeterintl.com | info@teeterintl.com
USA:
Teeter
9902 162
nd
St. Ct. E.
Puyallup, WA 98375
Toll Free:
800-847-0143
Fax:
800-847-0188
teeter.com | info@teeter.com
Any modification to this device will void the UL Listing.
This product is Listed by
Underwriters Laboratories Inc.
Representative samples of this
product have been evaluated
by UL and meet applicable
safety standards.
This product is Listed by
Underwriters Laboratories Inc.
Representative samples of this
product have been evaluated
by UL and meet applicable
safety standards.
This product is Listed by
Underwriters Laboratories Inc.
Representative samples of this
product have been evaluated
by UL and meet applicable
safety standards.
This product is Listed by
Underwriters Laboratories Inc.
Representative samples of this
product have been evaluated
by UL and meet applicable
safety standards.
Teeter Decompression Devices are multiple user, reusable devices for home use, intended to provide traction to the spine while stretching the para-spinal muscles and soft tissues.
The devices provide non-powered traction and are meant for use by adults.
Use of FDA-Cleared Teeter Decompression Devices is indicated for the following conditions: back pain, muscle tension, degenerative disc disease, spinal degenerative joint disease,
spinal stenosis, herniated disc, spinal curvature due to tight muscles, sciatica, muscle spasm, and facet syndrome.