Tecknet M021 Instructions Manual - User Manual

Full Text Searchable PDF User Manual

TeckNet M021 2.4GHz Cordless Mouse

Welcome

Thank you for purchasing this TeckNet product. To ensure optimum
performance and safety, please read these instructions carefully before
operating the product. It is strongly recommended you keep this manual
for future reference.

Product Layout

Left Click Button

Right Click Button

Froward Button

Scroll Wheel

DPI Switch Button

Backward Button

Low Battery Indicator

Technical Specifications

Button Count:

6 buttons

Operating Frequency:

2.4GHz

Resolution:

800/1200(default)/1600/2400/3200/4800DPI

Receiver Interface:

USB version 2.0

Operating Voltage:

1.5V

Operating Current:

10mA

Distance:

Upto 10m

MCU:

MA385E

Sensor:

PAW3212

Dimension:

123.5x71x39mm

Weight:

82g

Product Contents

1 x M021 Cordless Mouse

1 x USB Nano Receiver

1 x User Manual

1 x Warranty Card

System Requirements

Hardware

• PC with a Pentium processor or equivalent AMD processors

• USB 2.0

Operating System

• Windows 2000, 2003, XP, Vista, Win7, Win8, Win8.1

Note: The scroll wheel only works under the operating systems listed
above. If you use the mouse under a different operating system, the
mouse may either not work or lose its enhanced features.

Product Introduction

Battery Installation

The M021 optical mouse uses a single AA battery (not included).

1.Install the battery into the compartment, and make sure the polarity of the

battery is correct. The positive (+) and negative (-) ends of the battery
must match the positive (+) and negative (-) markings in the battery
housing. The red power indicator LED (the scroll wheel LED) will flash.

2.Replace the battery. Open the battery compartment cover, tap the

mouse slightly and the battery will drop out, ready to load new battery,
make sure they correspond with the polarity markings.

Receiver Connection

Remove the USB Nano receiver and plug it into a free USB port in your
computer. Turn on the mouse. The Plug & Play function of your system
will detect a new device has been connected and install it automatically.

USB Port

Nano receiver

Note: The receiver can be removed and stored next to the
battery compartment while not in use.

Take out the receiver

Store the receiver

Software Instructions

Installation:

1.Load the disc into CD Rom and double click the software icon.

2.Click "Install" to start installation.

3. Click "Next" then click "Install".

4. Double click software icon once installation is completed. The
main interface will show as below.

Button Setting:

Mouse:

Left button, Right button, Middle button, Forward, Backward, DPI.

Edit:

Copy, Cut, New, Open, Paste, Print, Redo, Save, Select All,

Undo,

CTRL, ALT, SHIFT, WIN.

Multimedia:

Media player, Prev Track, Next Track, Play/Pause, Stop,

Mute,

Volume+, Volume -.

Windows:

My computer, Mail, HOME, WWW Search, Close

windows,

Search Maximized, Minimized, File, Show Desktop, Run.

Parameter:

Double Click Speed, Mouse Point Speed, Mouse Scroll

Speed,

Polling Rate, DPI setting.

Examples

1) Mouse setting

If you would like to set up for “Right Button”, click it first and a drop-down

menu will show up as below. Then choose the setting you need, click "Apply"

then click "OK" to save the setting before exiting the software.

2)Edit setting

If you would like to set up for “Right Button”, click it first and a drop-down
menu will show up, select "Edit", a new drop-down menu shown as
below, then you can select the action needed, click "Apply" then click
"OK" to save the setting before exiting the software.

3)Multimedia setting

If you would like to set up for “Right Button”, click it first and a drop-down
menu will show up, select "Multimedia", a new drop-down menu shown
as below, then you can select the action needed, click "Apply" then click
"OK" to save the setting before exiting the software.

4) Windows setting

If you would like to set up for “Right Button”, click it first and a drop-down
menu will show up, select "Windows", a new drop-down menu shown as
below, then you can select the action needed, click "Apply" then click
"OK" to save the setting before exiting the software.

5) Parameter Setting

You can adjust the speed of "Double Click Speed", "Mouse Point
Speed", "Mouse Scroll Speed", "Polling Rate", "DPI" in this section.

Profile Setting

TeckNet M021 supports 5 profiles. You should define each profile first,
click "Apply", then click "OK" to save the profile.

Export Profile

1. You can export the profile after saving a profile, click "Save As".

2. A pop-up window will show up, you can select a captioned folder to
keep the profile, then click "Save".

Load File

You can load the saved profile into the software. Simply click "Load File",
a pop-up window will show up as below, select the folder with saved
profile, then select the captioned profile, click "Open" to load.

Restore:

Click "Restore", the captioned profile setting will return the

default

setting.

Restore All:

Click "Restore All", all the profile setting will return the

default

setting.

18-Month Battery Life

The mouse consumes very little power and enables a long battery life of
up to 18 months without changing the battery. However please note that
the actual battery life may vary based on user and computing conditions.

Intelligent Power Saving (IPS)

The mouse is equipped with Intelligent Power Saving (IPS) function.

• When the USB Nano receiver is disconnected or the PC is switched off,

the mouse will automatically switch off to conserve power.

• If the mouse is not used for 5 seconds, it will automatically drop to the

first level of IPS. To wake the mouse, click any button.

• If the mouse is not operated for 8 minutes, it will automatically drop to the

second level of IPS -- sleep mode. To wake the mouse, click any button.

DPI Switch

The mouse supports
800/1200/1600/2400/3200/4800DPI. To switch to
either setting, press the DPI button. The default
setting is 1200 DPI. Click the DPI button on the top
of the mouse once to switch from 1200 DPI to
1600 DPI, the DPILED will flash three times. Press
the DPI button for each time, the DPI will rise to
next level, and the DPI LED light will flash for one
more time.

Low Power Indicator

The mouse is equipped with low power indicator.
When the battery power gets low during the
period of use, the LED indicator will flash to
remind you replace the battery.

Note: We recommend you use AA alkaline dry

cell battery.

Reconnection

DPI Switch

Low Power Indicator

There is a wireless signal connection code for this mouse. High
temperatures, electro-magnetic fields or vibration may influence the code
signal and occasionally the mouse may need to be reconnected. Both
the mouse and Nano receiver have a built-in code and one mouse can
be connected to one receiver, or several mice to one Nano receiver.

1.Unplug the Nano receiver from USB port, and plug it back in.

2.Move the mouse within 50cm of the Nano receiver, re-install the battery or

press any key to reconnect; the above process must be completed within
15 seconds. LED indicator would flash if reconnection is successfully.

3.The mouse will be ready for use after reconnection.

Attention

1.To maximize battery life, it is recommended to use the mouse on a white

or light color surface. As the mouse might not work smoothly on some
special surfaces, such as smooth, dark or black, reflecting or 3D mouse
pad surfaces.

2.If not operated for 8 minutes, the mouse will enter auto-sleep mode.

Press any key or scroll wheel to activate the mouse again.

3.Do not use the mouse on a glass or mirrored surface, as these surface

will cause the mouse temporarily fail to work.

4.Avoid using the mouse on a metal surface, such as iron, aluminum or

copper which will shield the radio frequency transmission, slow down
the mouse presenter’s response time or cause temporarily fail to work.

5.If your PC has a metal case that contains aluminum or magnesium, use

the mouse by the side of the PC. The display panel may interfere with the
radio frequency if you use the mouse directly in front of the PC.

IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW

THESE INSTRUCTIONS.

1.SAVE THESE INSTRUCTIONS - This sheet contains important safety

and operating instructions.

2.Before using the product, read all instructions and caution markings on

the product, accessories and device using our product.

3.This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.

4.Children should be supervised to ensure that they do not play with

the appliance.

5.Keep the product away from fire or explosion may occur.

6.For indoor use only. Do not expose to rain, water, excess moisture or
snow. 7.For proper insertion, please observe polarity indicators ( +/-)

8.Remove the batteries if the mouse is not going to be used for a long

period of time.

9.Do not place product in or near inflammable, explosive or hazardous
object. 10.Do not place in or near water, rain, excess moisture or extreme
heat. 11.Do not operate product with damaged cord or plug.

12.Do not operate product if it has been damaged in any way.

13.Do not disassemble the product. Disassembly may result in a risk of

safety hazards.

14.Do not throw or shake the product

15.To reduce the risk of electric shock, unplug the product from the

power supply when not in use or switch off the power supply

Limited 18-Month Warranty:

What this warranty covers.

Shenzhen Unchain Technology Co., LTD. (Manufacturer: “Unchain”) warrants
to the original purchaser of this TeckNet product that the product shall be free
of defects in design, assembly, material, or workmanship.

What the period of coverage is.

Unchain warrants the TeckNet product for 18 Months.

What will we do to correct problems?

Unchain will repair or replace, at its option, any defective product free
of charge (except for shipping charges for the product).

What is not covered by this warranty?

All above warranties are null and void if the TeckNet product is not
provided to Unchain for inspection upon Unchain’s request at the sole
expense of the purchaser, or if Unchain determines that the TeckNet
product has been improperly installed, altered in any way, or tampered
with. The TeckNet Product Warranty does not protect against acts of God
such as flood, earthquake, lightning, war, vandalism, theft, normal-use
wear and tear, erosion, depletion, obsolescence, abuse, damage due to
low voltage disturbances (i.e. brownouts or sags), non-authorized
program, or system equipment modification or alteration.

How to claim the warranty

Please contact retailers or visit TeckNet website www.tecknet.co.uk for
more information

Disclaimer

Every effort has been made to ensure that the information and procedures
in this guide are accurate and complete, no liability can be accepted for
any errors or omissions and we reserve the right to make any changes
without further notice to any products mentioned herein.

Warranty

We warrant that product from authorized distributors will meet the
applicable product specifications and be free from all defects in design,
assembly, material and workmanship. Please contact TeckNet retailers, or
visit our website for more information about the product.

Ask a Question ?