Technotherm PH SlimLine Instruction Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

Feel good through warmth from electricity - www.technotherm.de

Model

• PH Slimline

Instruction Manual -

SlimLine

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY

AND RETAINED FOR FUTURE REFERENCE. BE SURE

TO OBSERVE ALL LABELS AND WARNINGS ON THE

APPLIANCE

Id.-Nr. 900 370 401

Edition :01/18

Feel good through warmth from electricity - www.technotherm.de

Instruction Manual - PH Slimline

Feel good through warmth from electricity - www.technotherm.de

1. PRESENTATION

First of all, we would like to thank you for having bought this product; we hope that it will give you ye

ars of reliable heating. Before installing the heater, please read the following instructions carefully. The

company is not responsible for any damage or problems resulting from incorrect installation. Once your

heater is up and running, please store this booklet in a safe place for future reference.

RECYCLING

When you no longer need this heater, please follow the European Directive 2002/96/CE as regards its

disposal. This heater cannot be discarded as normal rubbish. It must either be taken to a

special tip or to a distributor offering to dispose for you. Recycling electrical appliances sepa

rately allows component parts to be re-used and limits the damage to the environment that

would otherwise occur. Recycling saves power and resources. To encourage this, the heater

bears a symbol showing it cannot be put into a normal bin. For further information, get in touch with

your local council, or the supplier who you purchased this product.

VERY IMPORTANT!!

It is possible that the radiator may make slight sounds during the first days of operation. This is quite

normal in dry radiators and can occur when the aluminium elements expand and contract. Please note

there is no danger to the user. Children under 3 years old should be kept out of the equipment unless

they are constantly supervised. Children under 8 must only turn on / off the device provided in normal

position and only if they have received instruction concerning use of the equipment in a safe way and

understand the risks. All children under 8 years should not plug regulating, cleaning or maintenance

operations.

Caution: some parts of this product may become very hot and cause burns. Special attention when

children and vulnerable people are present. The device must not be covered and air circulation must

be allowed at all times.

2. HOW TO USE YOUR ELECTRIC RADIATOR

Understanding the full programming potential of your radiator will help to reduce energy consumption.

• DISPLAY

The radiator has an electronic programmable thermostat with LCD screen specially designed to control

different types of heating options.

1. Operating mode menu (all active modes are framed).

2. Program number or parameters number.

3. Installation parameter menu.

4. Key lock function indicator.

5. Room temperature indicator.

6. Type of time display (12H am/pm or 24H)

7. Graphic view for the current day program.

8. Display zone for Time, Temperatures and parameters.

9. Heating demand.

10. Pictogram for program creation, status in normal mode.

11. Pictogram for pilot wire indication.

12. Current day of the week

13. Override function in AUTO mode or ITCS function activated if blinking.

14. Windows open indicator.

Instruction Manual - PH Slimline

Feel good through warmth from electricity - www.technotherm.de

• KEYBOARD

1. On/Off

2. Minus Key -

3. Validation Key

4. Plus Key

5. Right Navigation key

3 FIRST INSTALLATION

This section will help guide you to starting your thermostat for the first time.

• POWER SUPPLY

Connect the electric radiator with the switch installed for this function.

When the thermostat is switched on for the first time, you will be asked to make some neces

sary selections (Clock, etc.). The batteries inside the thermostat will need to be charged for a

minimum of 24 hours in order to have maximum time saving capacity.

Now your thermostat will require adjustment of the time and date.

• TIME AND DATE ADJUSTMENT

First move the square cursor on the clock mode, then press the key (-) or (+) to start the adjust

ment. Each time a value blinks, you can adjust it with the (-) and (+) keys.

Once the value is chosen, confirm it with the (OK) key. The thermostat will move automatically

to the next value. List order of the time and date adjustments:

1. Time and day:

- Adjustment of the hours,

- Adjustment of the minutes

- Adjustment of the day (1 = Monday)

2. Date:

- Adjustment of the day number

- Adjustment of the Month (01=January, 12=December)

- Adjustment of the Year

• STARTING

The thermostat is now ready to work. The default working mode will be comfort .At any time,

when the light is off, press the OK, “-“, “+” or . Press OK and then press the second time to

show the fixed temperature.

•

ON/OFF

Press key if it is available on your radiator to turn off or turn on the radiator, Navigate to this

key using the ( ) scroll key to select mode .

Select OFF to turn the radiator to the off position.

Feel good through warmth from electricity - www.technotherm.de

Instruction Manual - PH Slimline

Feel good through warmth from electricity - www.technotherm.de

MODES OF OPERATION

How to change the working mode?

•

Use the navigation key right ( ) (in some models also you can

use the key left ) or to display the working mode line.

•

Move the frame cursor on the desired working mode and press (OK)

to enter in the operating mode you have chosen.

• MANUAL MODE COMFORT

Manual working mode, the comfort temperature setting will be followed 24 hours a day / 7 days

a week. By pressing (-) or (+) keys, the temperature can be adjusted accordingly.

• MANUAL MODE REDUCED

During manual working mode the reduced temperature setting will be followed 24 hours a day

/ 7 days a week. By pressing (-) or (+) keys, the temperature starts to blink and can be adjusted.

• OFF MODE

This mode only is selectable on radiators without an On/Off button. On radiators with an On/Off

button, press this key to turn Off.

Use this mode if you need to switch off your installation.

Be careful: in this mode your radiator can freeze.

• AUTOMATIC MODE

With this mode the thermostat will follow the chosen program (Built-in or customised) accor

ding to the actual time and the Comfort and Reduced temperature settings.

You can easily override the current program temperature by changing the value with (-) or (+).

The current settingntemperature will blink.

The small hand logo will be displayed when the override function is active. The original

temperature settings will eturn when the timer reaches the next change in the programme.

If hand logo blinks then ITCS is active (See the user menu for more explanation on this

function).

• ANTIFREEZE MODE

Use this mode if you want to protect your radiator against freezing when going on holiday...

The anti-freeze setting temperature is fixed and can be adjusted in the parameter menu number

05 ‘AF’, see chapter 6. (Default value 5°C)

If you want to stop the timer function before the end, set the duration period to “no” with (-) key.

• TIMER MODE

The Timer mode allows you to adjust the temperature and the duration for a specific time.

- This function can be used when you stay at home for several days, or if you want to override

the program or some time.

- You can first adjust the duration in hours “H” if below 24H, then in days “d” with (-) or (+),

press (OK) to confirm. (Adjustable from 1 hour up to 44 days)

- You can also adjust the desired setting temperature to start the function. (Default value 21°C).

The logo will blink and the number of hours /days remaining is displayed until the end of the period.

Instruction Manual - PH Slimline

Feel good through warmth from electricity - www.technotherm.de

5. PROGRAMMING WEEKLY

Select the mode with the keys of displacement

When you enter in the Program mode, the first operation is to choose the program number using the

(-) or (+) keys. You can choose between a built-in program P1 to P9 or an user program U1 to U4. Select a

program and press ok to validate.

If you select a built-in program P1 to P9, you can view and select only one of the following pre-set program

options.

P1: Morning, Evening & Weekend

P2: Morning, Midday, Evening & Weekend

P3: Day & Weekend

P4: Evening & Weekend

P5: Morning, Evening (Bathroom)

P6: Morning, afternoon & Weekend

P7: 7H – 19H (Office)

P8: 8H – 19H & Saturday (Shop)

P9: Weekend (Secondary house)

The bars indicate the hours with comfort temperature and the rest of the day the spaces represent the eco

(reduced) temperature mode. (See the appendix section to view a complete description of the Built-in

program)

•

Use the navigation key right ( ) to view the program of alternative days of the week.

•

Press the (OK) key to confirm your choice and return to the main screen (in AUTO mode)

•

If you select a user program U1 to U4 as mentioned above you can choose the program, view it and also

amend it.

Default setting:

•

U1, U2, U3, U4 = in comfort for the week

•

Press the confirmation key (OK) to customise a user program

Description of the creation of a user program:

•

The program step is 30 minutes

•

Each time a value or icon blinks you are

invited to make a choice with the (-) or (+)

keys. Once the choice is made press the (OK) key

to jump to the following step.

Day

Program of the day

Program number

Feel good through warmth from electricity - www.technotherm.de

Instruction Manual - PH Slimline

Feel good through warmth from electricity - www.technotherm.de

•

The program creation will always start with day 1 (Monday).

•

The key (-) activates the ECO temperature mode to begin.

•

The key (+) activates the COMFORT temperature mode to begin.

•

Use the (-) or (+) buttons to select the duration of the ECO and Comfort temperature modes in in

tervals of 30 minutes.

•

When you have completed the first day the programme will automatically move to the next day.

After validating the seventh day, the system automatically returns to AUTO mode and your programme

mode will appear in the top right corner. For extra assistance, please contact the seller for a step by

step guide.

6. SPECIAL FUNCTIONS

•

KEYBOARDS LOCK FUNCTION:

Use this function to prevent any changes to your settings (In a child room, public area, etc...)

To activate the Key lock function, first press and maintain the validation key (OK) and then press

simultaneously on the right arrow key ( ).

- The “ ” logo will be displayed on the screen.

- Repeat the same procedure to unlock the keyboard.

Note: The keyboards lock function is available in all modes.

• FUNCTION WINDOWS OPEN

This function will stop the radiator automatically when it detects a window open if the

radiator is running. When this feature is enabled, the icon appears at

the top left of the screen. If the system detects a fall of approximately 3 °C,

it stops the heating for a period of 1 hour. The icon will blink and the

temperature will be measured by the radiator. Pressing any button at this

stage will stop the detection of open windows. The radiator will begin to

function normally again and will restarts the detection of open windows.

• MENU PARAMETERS

Your thermostat has a parameter’s menu. To enter this menu, press and

maintain the validation key (OK) for 5 seconds. Then the parameter menu

will appear and the first menu screen will be displayed. Now you can

select the parameters which must be adjusted with the navigation keys

( ). Press the (OK) key to edit the parameter that you wish to modify

and change its value with (+) or (-), then confirm with (OK).

Nº Default value & other possibilities

dEG

: Type of degrees displayed

°C Celsius

°F Fahrenheit

24h

: Selection of the clock

24H (24:00)

12H (12:00 AM /PM)

dSt

: Daylight summer time.

Yes the automatic change over time between Summer and Winter is activated according to date

No no daylight summer time automatic change.

Instruction Manual - PH Slimline

Feel good through warmth from electricity - www.technotherm.de

_ ._

: Calibration of the internal probe

The calibration must be done after 1 day working with the same setting temperature in

accordance with the following description:

Put a thermometer in the room at 1.5M distance from the floor (like the thermostat) and check

the real temperature in the room after 1 hour.

When you enter on the calibration parameter the actual value is displayed.

To enter the value shown on the thermometer, use the (-) or (+) keys to enter the real value. Then,

press (Ok) to confirm. The logo should be displayed, to inform that a calibration is now made

and saved in the memory. If you need to erase a calibration already made press on the

navigation key left ( ). Then the logo must disappear.

* Pay attention: Only the heating element managed by the thermostat must be used during the

complete step of the calibration.

: Anti Freeze temperature:

This Anti-freeze temperature used in Holiday mode.

Adjustable 0.5 to 10.0°C with default value 5.0°C.

ITCS

: Intelligent Temperature Control System

The Intelligent Temperature Control System will activate your installation in advance (2 hours

maximum) to assure the desired temperature at the hour programmed following your weekly pro

gram. This automatic control system works in the following way:

When you start your thermostat for the first time, it will measure the time taken by your

installation to reach the set temperature. The thermostat will re-measure this time at each pro

gram change to compensate external temperature change & influence. You can now program

your thermostat without the need to adjust the temperature in advance because your

thermosat does it automatically for you.

WIN

: Automatic detection of open windows.

This feature allows detect automatically if you open a window.

No: deactivation of the function.

Yes: Activate the function

Clr

: Factory setting

Press and maintain (Ok) key during 10s to reset Set points temperatures and user parameters in

this menu to factory default settings. User programs will also be resetted.

* Pay attention:

Ensure that you have all necessary elements to re-setup your installation before to use this

function.

9 Software version

_._

End

: Exit the parameter’s menu

Press (OK) key to exit installation parameter menu and return to normal operation.

Feel good through warmth from electricity - www.technotherm.de

Instruction Manual - PH Slimline

Feel good through warmth from electricity - www.technotherm.de

7. TECHNICAL CHARACTERISTIC

Measured temperature precision

0.1°C

Environmental:

•

Operating temperature

•

Shipping and storage temperature

0°C - 40°C

-10°C to +50°C

Setting temperature range

•

Comfort, Reduced

•

Timer

5°C to 37°C by 0,5°C step

Regulation characteristics

Proportional band (PWM)

Power Supply

230Vac +/- 10% 50Hz

Output

•

Maximum Load (Resistive only)

TRIAC 230Vac

8 Amps (1850W)

Software Version

Displayed in the user menu.

Norms and directives:

Your thermostat was designed in accordance with the follo

wing Europeans norms and directives:

EN 60730-1 : 2003

EN 61000-6-1 : 2002

EN 61000-6-3 : 2004

EN 61000-4-2 : 2001

Low voltage 2006/95/EC

EMC 2004/108/EC

8. TROUBLESHOOTING & SOLUTION

My Thermostat doesn’t work
Power supply

- Check the power supply

My Thermostat show an Error message “

Err

” blink on the display

“

Error

” on sensor

Note:

For safety if there is a problem on the regulation sensor the

regulation will be replaced by a rate of 5 % functioning.

The logo and the text “

Err

” blinks. Error detected on

the internal sensor

- Contact your installer or seller.

Thermostat

seems work correctly but the heating doesn’t work correctly

Output

- Check the connections.

- Check the power supply of the heating element.

- Contact your installer.

Thermostat

seems work correctly but the temperature in the room was never in accordance with the program.

Program

- Check the Clock.

-The difference between Comfort & Reduced temperature

is too high?

- The step in the program is too short?

- Check the pilot wire function.

Instruction Manual - PH Slimline

Feel good through warmth from electricity - www.technotherm.de

9. INSTALLATION

• BEFORE INSTALLING

Whilst the installation of this heater is straightforward, please ensure you read the following carefully as

the manufacturer will not be liable for any damage or problems arising from incorrect installation.

Unwrap your heater and clear the packaging away. The packaging has been specifically chosen to allow

you to recycle it. If on unpacking, you discover any damage whatsoever, please get in touch with your sup

plier within 24 hours and prior to installation.

For assembly and installation, please follow the instructions as set out in this booklet. For safety reasons,

this heater should never be installed in close proximity to a bath or shower i.e. that you could touch the

controls whilst in the bath or shower. The radiator should not be placed below a socket. If the cable has

been damaged, it can only be replaced by the manufacturer, through its aftersales team, or by a qualified

person. This ensures the user will not be in any danger. At the end of the manual, you will find a Guarantee,

please check that this has been completed correctly, dated and stamped

Very important:

- Read installation manual prior to installation of this unit!

- Read user manual before putting this unit in operation!

- Observe the warnings in the manuals!

- The installation room must fulfil the ventilation requirements!

- Installation by an authorised person only!

• CONNECTING ELECTRICITY SUPPLY

- If the Thermal Emitter that you have acquired does not have a plug on the supply cord, installati

on shouldbe carried out by a qualified electrician.

- Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring

rules of thecountry where it is to be installed.

- Before connecting, check the supply is switched off.

- Before connecting the appliance to the fixed wiring check that the voltage of supply is inside the

ratedvalues indicated in the marking plate 220 - 240V.

- The appliance must be connected to the fused system of fixed wiring.

- Any problem arising from not following the instructions above will invalidate your guarantee

- When wiring up, please follow the colours of wires.

• HANGING THE HEATER

The radiator comes complete with an installation kit, comprising the following:

- Screws

- Brackets

Cardboard guide, (remove from the top of the box the radiator comes in). Please follow the illustrated

steps below to hang and install your radiator:

Take the radiator out of its packaging and choose where to hang it. Please notethe minimum

distances required around the heater.

Remove the cardboard guide from the lid of the box and place it at the rightheight, as shown

in diagram 4 below. We suggest you use a level to ensure theradiator is hung square. Using the

holes as your guide, mark where the bracketsneed to go.

Drill and plug the holes.

Screw the brackets to hold the radiator into place, using the screws and washersprovided.

Place the unit so that the brackets [15] fit into the slot that has the upper profile ofthe radiator.

Approximate the radiator to the holders of the wall brackets and screw fixation.

Use a hole drill for holes with appropriate stoppers for the type of wall.

Feel good through warmth from electricity - www.technotherm.de

Instruction Manual - PH Slimline

Feel good through warmth from electricity - www.technotherm.de

10|

Read installation manual prior to installation of this unit!

•

Read user manual before putting this unit in operation!

•

Observe the warnings in the manuals!

•

The installation room must fulfil the ventilation requirements!

•

Installation by an authorised person only!

10. CONNECTING ELECTRICITY SUPPLY

•

If the Thermal Emitter that you have acquired does not have a plug on the supply cord, installation

should be carried out by a qualified electrician.

•

Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring

rules of the country where it is to be installed.

•

Before connecting, check the supply is switched off.

•

Before connecting the appliance to the fixed wiring check that the voltage of supply is inside the

rated values indicated in the marking plate 220 - 240V.

•

The appliance must be connected to the fused system of fixed wiring.

•

Any problem arising from not following the instructions above will invalidate your guarantee

•

When wiring up, please follow the colours of wires

Instruction Manual - PH Slimline

Feel good through warmth from electricity - www.technotherm.de

|11

11. WIRING DIAGRAM

12. GUARANTEE.

The manufacturer produces high quality products for international markets. The company provides a

technical guarantee for the period of 2 years maximum. For this warranty to be valid you must present

the original invoice, delivery note or ticket.

Prerequisites:

•

The guarantee only covers manufacturing defects and/or any problem occurring from such defects.

Allproblems arising from installing and undersized heater (not enough heat, improper installation,

etc) are notcovered by this guarantee.

•

This heater is for domestic & light commercial use only, installation in any other environment voids

thisguarantee

•

Technotherm reserves the right to decide whether to repair or replace any defective part or to

replace the entire heater.

•

All costs arising from any damage caused by incorrect usage, transport, electrical supply are not

coveredby this guarantee, nor is any malicious damage.

This guarantee does provide compensation for incidental or consequential damage or injuries.

Feel good through warmth from electricity - www.technotherm.de

Instruction Manual - PH Slimline

Feel good through warmth from electricity - www.technotherm.de

12|

TECHNOTHERM Support

+49 (0) 911 937 83 210

TECHNOTHERM a brand of Lucht LHZ GmbH & Co. KG

Reinhard-Schmidt-Str. 1 | 09217 Burgstädt | Germany

Telefon: +49 (0) 3724 66869 0

Telefax: +49 (0) 3724 66869 20

info@technotherm.de | www.technotherm.de

Subject to errors and technical amendments. Dimensions without guarantee! Edition 01/18

Information requirements for electric local space heaters

Model: PH SlimLine

Item

Symbol

Value

Item

Value

Heat output

Type of heat input, for electric storage local space heaters only (select one)

Nominal heat output

nom

0,9

1,5

2,0

manual heat charge control, with integrated thermostat

Minimum heat

output (indicative)

min

0,5

1,0

1,2

manual heat charge control with room and/or outdoor temperature

feedback

Maximum continuo-

us heat output

max,c

0,5

1,0

1,2

electronic heat charge control with room and/or outdoor

temperature feedback

Auxiliary electrici-

ty consumption

fan assisted heat output

At nominal heat

output

max

0,9

1,5

2,0

Type of heat output/room temperature control (select

one)

At minimum heat

output

min

1,2

single stage heat output and no room temperature control

1,2

Two or more manual stages, no room temperature control

In standby mode

1,2

with mechanic thermostat room temperature control

1,2

with electronic room temperature control

electronic room temperature control plus day timer

electronic room temperature control plus week timer

Yes

Other control options (multiple selections possible)

room temperature control, with presence detection

room temperature control, with open window detection

Yes

with distance control option

with adaptive start control

Yes

with working time limitation

with black bulb sensor

Contact Information:

Lucht LHZ Elektroheizung GmbG & Co. KG | Reinhard-Schmidt.Str.1 D-09217 Burgstädt

Ask a Question ?