Full Text Searchable PDF User Manual
Owner’s Manual
Technology & Calibration, Inc. - Houston, Texas
www.techcal.com
Operating Instructions
1) Thoroughly check instrument at the time of unpacking to inspect for any damage that
may have occurred during shipment.
2) Mount the unit as level as possible.
3) Make sure the recorder is secure.
4) Select the desired rotation speed on the chart drive.
5) Install chart by unlocking the chart hub.
6) Raise the Pen Lifter.
7) Slide the chart paper between the pens and the chart plate securing it in the tabs.
8) Lock the Hub and lower the Pen Lifter.
9) Verify that the pen (s) are in in contact with the chart paper and have sufficient ink.
10) Apply zero pressure and adjust the pen for chart zero.
11) Turn on the pressure to the unit.
12) Upon completion of test, turn off the Pressure.
13) Turn off the Chart Drive.
14) Lift pen (s) from Chart Paper.
15) Replace Pen covers to keep pens from drying out.
* If the recorder is suspected to be out of tolerance or not reading correctly please
contact an authorized repair facility or the manufacture for repair and/or recalibration.
* Each Tech Cal Recorder is supplied with NIST Traceable Certifications. It is required
that occasionally the recorder be recalibrated to ensure it accuracy.
General Specifications:
Case
Polyethylene Copolymer, Chemical Resistant, Light Weight & Durable
Temperature Range: -10°F to 210°F
Window
Lexan, Polypropylene, Impact Resistant
Chart Drive
‘C’ Battery Operated, UL and cUL Listed For Hazardous Locations,
Temperature Range: -40°F to 160°F
Chart Size
12-inch Diameter (American Meter Style)
Chart Rotation
60 Min, 96 Min., 12 HR, 1,2,7,8,14,16,31 & 32 Day
Number of Pens
1-3 (one for each element)
Pen Style
Disposable, Clip-On
Element Type
Pressure-Helical (bourdon), Stainless Steel
Temperature-Helical (bourdon) Class V Mercury Filled
Range
Pressure 0 thru 30,000 PSI,
Temperature 0 - 250 Deg. F
Accuracy
+/- .5% of Full Scale
Item
Part # Description
1
4P143
Foot
2
4P136
Pen Lifter Assembly
3
4P113
Soft Grip Top Handle
4
4P131
Case Connector, 1/4” NPTF
5
4P121
Pen Mount Assembly
6.1
4P101
500 PSI Static Pressure Element
6.2
4P102
1K PSI Static Pressure Element
6.3
4P103
2K PSI Static Pressure Element
6.4
4P104
3K PSI Static Pressure Element
6.5
4P105
5K PSI Static Pressure Element
6.6
4P106
10K PSI Static Pressure Element
6.7
4P107
15K PSI Static Pressure Element
6.8
4P108
20K PSI Static Pressure Element
6.9
4P109
25K PSI Static Pressure Element
6.10
4P110
30K PSI Static Pressure Element
7.1
4P140
1st From Chart, Blue
7.2
4P141
2nd From Chart, Red
7.3
4P142
3rd From Chart, Green
8
4P801
Link Assembly
9
4P127
Pen Arm, Long Slot
10
4P139
Riser, Chart Plate
11
4P137
Riser, Temp. System
12
4P138
Riser, Chart Drive
Item
Part # Description
13
4P130
Hub, G190
14
4P125
Pen Shaft Arm Assembly, 90 Deg
15
4P135
Range Adjustment Arm
16.1
4P122
1st From Chart, Shaft Assembly.
16.2
4P123
2nd From Chart, Shaft Assembly.
16.3
4P124
3rd From Chart, Shaft Assembly.
17
4P128
Chart Plate
18
4P120
Back Plate
19
4P144
Lexan Window
20
4P161
Ambient Temp. Sys., 0-150 Deg.F
21.1
4P111
0-150Deg F, Temp. Sys. /10’ Armor Cap
21.2
4P112
0-200Deg F, Temp. Sys. /10’ Armor Cap
21.3
4P164
50-250Deg F, Temp. Sys./10’ Armor Cap
22
4P163
Pen / Battery Holder
23.1
4P116
Black Case
23.2
4P117
Orange Case
23.3
4P118
Yellow Case
23.4
4P119
Silver Case
24
4P129
Chart Drive, Sonceboz 0820
25
4P158
Pipe Mount, 2” Slip-On
Not Shown
4P165
Spool, Temp. Cable
Not Shown
4P166
Panel Mount Brackets
Not Shown
4P167
Lower Connection Plate
Parts List
Warranty
Tech Cal Recorders are warranted against defective mate-
rials or workmanship for 12 months following the date of
shipment. Technology & Calibration, Inc.’s liability is lim-
ited to repair or replacement at the factory. No obliga-
tion can be assumed for recorders subjected to mis-
use or unauthorized repairs.
Manufactured By:
Technology & Calibration, Inc.
Houston, Texas
888-546-6506 Toll Free
www.techcal.com
© 2007 Technology & Calibration, Inc.
ISO 9001 Certified