Technische Alternative TL-MR3020 Installation Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

WNA

Version 1.00 EN

Manual version 1

Wireless Router

Installation manual

Delivery scope

The delivery scope of the device includes the following parts:



Wireless Router WNA (TL-MR3020)



Power pack



USB cable



Ethernet LAN cable



A CD with: Operating instructions (English)



Installation manual (English)

Displays, operating elements, connections

LED

Status

Importance

Power

The router is supplied with electrical voltage.

Off

The router is switched off.

Internet

The router is connected with the Internet but no data is transmitted.

Flashes

The router is connected with the Internet and data is transmitted.

Off

The router is connected with the Internet.

WLAN

The WLAN interface is activated.

Flashes

The WLAN interface is activated and data is transmitted.

Off

The WLAN interface is deactivated.

Ethernet

There is an inactive connection with the port.

Flashes

Data is transmitted to the port.

Off

The port is not connected.

Reset

: If the key flashes for longer than 10 seconds, the router will carry out a reset.

Power

Internet

WLAN

Ethernet

WPS/Reset

CMI



3G/4G USB port: Connection for the USB modem.



Mini USB port: Connection to the

power supply



Ethernet port: This port is used as a LAN connection.



Operating mode selector switch: Selection of router modes. If the operating mode is changed

during operation, the router will be restarted.

The router information is on a label on the side of the router: MAC address, key, SSID and the default
settings: IP address, user name, password.

This installation manual describes only two operating modes that are relevant for the operation of the
routers in connection with the interface C.M.I.

Operation in 3G/4G router mode

As 3G/4G router (with 3G/4G modem/board), this router can be connected with a 3G mobile phone
network and provided its Internet connectivity with an individual WLAN SSID.

3G/4G-USB-

modem connection

Mini USB port (DC)

Ethernet port

Operating mode selector switch

Connection to the network

A WLAN connection is used to configure the router in the example. (You can also use a LAN connec-
tion for the configuration.)

Windows XP and Windows 7

On the task bar, click on the icon (Windows XP) or (Windows 7/8)

Click on

Update network list

and select the WLAN network of the router and click on

Con-

nect

The standard SSID (network name) of the router is TP-LINK_POCKET_3020_xxxxxx. (The
values xxxxxx are the last 6 digits of the MAC address of the router.)
The network key (“Key”) is on the sticker on the side of the router. Please use this key when
you connect to the WLAN.
If the WLAN network of the router shows

Connected

, you are successfully connected with the

RASPT router.

Windows XP Windows 7

Windows 8.x

The key combination Windows+I takes you to the settings.

The WLAN symbol takes you to the list of all networks that you receive.

Tap or click on the name of the network that you want to establish a connection with and then
tap or click on “Establish connection”.

Router configuration

Open a web browser and enter the address

http://192.168.0.254

in the address line and per

Enter

The log-in window shown in the figure below appear. Enter

admin

as user name

and

pass-

word. Click on

or press

Enter

Before you proceed with the configuration, check the status of 3G/4G in

Status

to see if your

3G/4G modem stick has been detected.

In the menu, go to

Quick Setup

and click on

Next

The network name of the router is
here:

TP-LINK_POCKET_3020_xxxxxx

Click on

Next

. The Internet access page appears. Select

3G/4G Only (recommended)

and

click on

Next

Enter your

access data

in this page and click on

Next

If you cannot find your provider in the menu, set

Set the Dial Number, APN, user name and

password manually

to manual entry and enter your access data according to the information

of your provider (ISP).

The WLAN setting are now displayed.
You can leave the settings or change the “

Wireless Network Name

“ (ISS) and/or the

pass-

word

. Click on

Next

Click on

Reboot

to accept the new WLAN configuration and to complete the

Quick Setup

. (If

the WLAN settings were not changed, click on

Finish

to complete the quick installation”.)

After the restart, connect with the network again (see chapter “

Connection to the network

”)

10.

You can now connect the C.M.I. with the router. The C.M.I. must be restarted subsequently.

Operation in AP (“Access Point”) mode

Configured as

Client

, the router how behaves like a WLAN card and thus does integrates non-WLAN-

capable Ethernet devices in a wireless network.

TCP/IP configuration

A LAN connection is used to configure the router in the example. (You can also use a WLAN connec-
tion for the configuration.)

Windows XP:

Start → Settings → Control panel → Network connections;

for Windows 7:

Start → Control panel → Network and Internet → Network and release

center → Change adapter settings;

for Windows 8: Windows-

+ C key → tap/click on

Search

→ enter the text

Control panel

the search field and then tap/click on

Control panel

→ Network and Internet → Network

and release center → Change adapter settings

Right-click on the

LAN connection

and select

Properties

In Windows XP, double-click on the

Internet protocol (TCP/IP)

;

In Windows 7 and Windows 8.x, double-click on the

Internet protocol version 4 (TCP/IPv4)

Windows XP Windows 7 / Windows 8.x

CMI

Select the

following IP address

and enter an

IP address

with the format

192.168.0.x

is a

number from 1 to 253 and the subnet mask is 255.255.255.0. Click on

Router configuration

Open a web browser and enter the address

http://192.168.0.254

in the address line and per

Enter

Enter

admin

as user name

and

as password. Click on

or press

Enter

In the menu, go to

Quick Setup

and click on

Next

Select the

wireless operation mode type “Client”

and click on

Next

The following window appears. Enter the

network name

(SSID) and the

security settings

Then click on

Next

The “

security mode

” must be set precisely according to the setting of the existing WLAN.

None

means that the router is working completely without encryption. This way, anyone within

reach can connect with the router.

Click on

Reboot

to restart the router and to accept the settings.

After the router restart, change the TCP/IP settings of your computer back to

Automatically

get IP address

and

Automatically get DNS server address

and establish the network con-

nection.

You can now connect the C.M.I. with the router. The C.M.I. must be restarted subsequently.

We reserve the right to make technical changes.

EC- DECLARATION OF CONFORMITY

Document- Nr. / Date:

TA12032 / 27.06.2014

Company / Manufacturer:

Technische Alternative elektronische SteuerungsgerätegesmbH.

Address:

A- 3872 Amaliendorf, Langestraße 124

This declaration of conformity is issued under the sole responsibility of the manufacturer (or
ins

Product name:

WNA

Product brand:

Technische Alternative GmbH.

Product description:

Wireless Router

The object of the declaration described above is in conformity with Directives:

1999/5/EC, 2004/108/EC, 2006/95/EC, 1999/519/EC, 2011/65/EU

Employed standards:

ETSI EN 300 328 V1.7.1: 2006, ETSI EN 301 489-1 V1.8.1:2008& ETSI EN 301 489-17 V2.1.1:2009,
EN 55022:2010, EN 55024:2010, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-3-3:2008,
EN60950-1:2006+A11

：

2009+A1:2010+A12:2011, EN 62311:2008, EN 301 893, EN 302 502

Position of CE - label:

On packaging, manual and type label

Issuer:

Technische Alternative elektronische SteuerungsgerätegesmbH.
A- 3872 Amaliendorf, Langestraße 124

This declaration is submitted by

Kurt Fichtenbauer, General manager,
27.06.2014

This declaration certifies the agreement with the named standards, contains however no warranty of
characteristics.

The security advices of included product documents are to be considered.

Guarantee conditions

Note:

The following guarantee conditions do not in any way limit the legal right to a guaran-

tee, rather expand your rights as a consumer.

1. The company Technische Alternative elektronische Steuerungsgerätegesellschaft m. b. H.

provides a two-year guarantee from the date of purchase by the end consumer for all the de-
vices and parts which it sells. Defects must be reported immediately upon detection and within
the guarantee period. Technical support knows the correct solution for nearly all problems. In
this respect, contacting us immediately will help to avoid unnecessary expense or effort in
troubleshooting.

2. The guarantee includes the free of charge repair (but not the cost of on site fault-finding, re-

moval, refitting and shipping) of operational and material defects which impair operation. In the
event that a repair is not, for reasons of cost, worthwhile according to the assessment of
Technische Alternative, the goods will be replaced.

3. Not included is damage resulting from the effects of overvoltage or abnormal ambient condi-

tions. Likewise, no guarantee liability can be accepted if the device defect is due to: transport
damage for which we are not responsible, incorrect installation and assembly, incorrect use,
non-observance of operating and installation instructions or incorrect maintenance.

4. The guarantee claim will expire if repairs or actions are carried out by persons who are not au-

thorised to do so or have not been so authorised by us or if our devices are operated with
spare, supplementary or accessory parts which are not considered to be original parts.

5. The defective parts must be sent to our factory with an enclosed copy of the proof of pur-

chase and a precise description of the defect. Processing is accelerated if an RMA number is
applied for via our home page

www.ta.co.at

. A prior clarification of the defect with our technical

support is necessary.

6. Services provided under guarantee result neither in an extension of the guarantee period nor

in a resetting of the guarantee period. The guarantee period for fitted parts ends with the
guarantee period of the whole device.

7. Extended or other claims, especially those for compensation for damage other than to the de-

vice itself are, insofar as a liability is not legally required, excluded.

Legal notice

These assembly and operating instructions are protected by copyright.
Use outside the copyright requires the consent of the company Technische Alternative elektronische
Steuerungsgerätegesellschaft m. b. H.. This applies in particular to reproductions, translations and
electronic media.

elektronische Steuerungsgerätegesellschaft m. b. H.

A-3872 Amaliendorf Langestraße 124

Tel +43 (0)2862 53635 Fax +43 (0)2862 53635 7

E-Mail:

mail@ta.co.at

---

www.ta.co.at

Ask a Question ?