Full Text Searchable PDF User Manual
Before using your washing machine,please read this
manual carefully and keep it for future reference.
Inside you will find many helpful hints on how to use
and maintain your washer dryer machine properly. Just
a little preventative care on your part can save you
a great deal of time and money over the life of your
washer dryer machine. You’ll find many answers to
common problems in the chart of troubleshooting
tips. If you review the chart of Troubleshooting Tips
first, you may not need to call for service.
Read This Manual
CAUTION: HOT SURFACE !
CAUTION: RISK OF FIRE !
- If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
- The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.
- This washer dryer machine is for indoor use only.
- The ventilation openings must not be obstructed by a carpet.
- This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capab
-ilities,or lack of experience and knowledge, unless they
have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
- Pull out its plug from the power socket before cleaning or
- Make sure that all pockets are emptied.
- Sharp and rigid items such as coin, brooch, nail, screw or
stone etc. may cause serious damages to this machine.
- Pull out its plug and cut off water supply after the operation.
- Please check whether the water inside the drum has been
drained before opening its door. Please do not open the
door if there is any water visible,
- Pets and kids may climb into the machine.Check the
machine before every operation.
- Glass door may be very hot during the operation.Keep kids
and pets far away from the machine during the operation.
- Take care that power voltage and frequency shall be
identical to those of washer dryer machine.
- Do not use any socket with rated current less than that of
Overview of Washer dryer Machine
Checklist and Preparation before Washing Clothes ..............................
View of Control Panel...........................................................................
Table of Washing and drying Procedures .............................................
Select the procedure
Cleaning and Maintenance of Washer dryer Machine Cabinet
Remove the problems .......................................................................
Product Specifications .......................................................................
- Do not use any socket with rated current less than that of
washer dryer machine.Never pull out power plug with wet hand.
- To ensure your safety, power cord plug must be inserted
into an earthed three-pole socket. Check carefully and
make sure that your socket is properly and reliably earthed.
- Children of less than 3 years should be kept away unless
- Kids should be supervised to ensure that they do not play
with the machine.
- Packing materials may be dangerous to the kids. Please
keep all packing materials (plastic bags, foams etc) far
away from the kids.
- Washer dryer machine shall not be installed in bath room
or very wet rooms as well as in the rooms with explosive
or caustic gases.
- Make sure that the water and electrical devices must be
connected by a qualified technician in accordance with the
manufacturer's instructions and local safety regulations.
- Before operating this machine, all packages and transport
bolts must be removed.Otherwise,the washer dryer machine
may be seriously damaged while washing the clothes.
- Before washing the clothes at first time, the washer dryer
machine shall be operated in one round of the whole
procedures without the clothes inside.
- Your washer dryer machine is only for home use and is
only designed for the textiles suitable for machine washing.
- Flammable and explosive or toxic solvents are forbidden.
machine with single inlet valve only can
be connected to the cold water supply. The
machine with double inlet valves can be connected to the
hot water and cold water supply
Gasoline and alcohol etc. shall not be used as detergents.
Please only select the detergents suitable for machine
washing, especially for drum.
- It is forbidden to wash carpets.
- Be careful of burning when washing machine drains hot washing
- Never refill the water by hand during washing.
- After the program is completed,please wait for two minutes
to open the door.
- Please remember to disconnect water and power supply
immediately after the clothes are washed.
- Do not climb up and sit on top cover of the machine.
- Do not lean against machine door.
- Please do not close the door with excessive forces.If it is
found difficult to close the door,please check if the excessive
clothes are put in or distributed well.
- Cautions during Handling Machine
1.Transport bolts shall be reinstalled to the machine by a
2.The accumulated water shall be drained out of the machine.
3. Handle the machine carefully. Never hold each protruded
part on the machine while lifting. Machine door can not
be used as the handle during the conveyance.
4. That the hands shall not be inserted into running water
- The washer dryer is not to be used if industrial chemicals
have been used for cleaning.
Oil-affected items can ignite spontaneously, especially
when exposed to heat sources such as in a tumble dryer.
The items become warm, causing an oxidation reaction in
the oil. Oxidation creates heat. If the heat cannot escape,
The openings must not be obstructed by a carpet.
The exhaust air must not be discharged into a flue which
is for exhausting fumes from appliances burning gas or
- The appliance must not be installed behind a lockable door,
a sliding door or a door with a hinge on the opposite side to
that of the washer dryer.
shall not beinstalled at a humid place.
- The household washer dryer isn't intended to be built-in.
The washer dryer whose lid can be opended during water
extraction,that it takes 15s or more for complete stop of
water extracting chamber tub
the items can become hot enough to catch fire. Piling,
stacking or storing oil-affected items can prevent heat from
escaping and so create a fire hazard.
If it is unavoidable that fabrics that contain vegetable or
cooking oil or have been contaminated by hair care products.
be placed in a tumble dryer they should first be washed in
hot water with extra detergent - this will reduce, but not
eliminate, the hazard.
- Adequate ventilation has to be provided to avoid the back
flow of gases into the room from appliances burning other
fuels, including open fires.
Do not dry unwashed items in the washer dryer.
- Items that have been soiled with substances such as cooking
oil, acetone, alcohol, petrol, kerosene, spot removers,
turpentine,waxes and wax removers should be washed in
with an extra amount of detergent before being dried
in the washer dryer.
- Items such as foam rubber (latex foam), shower caps,water
proof textiles, rubber backed articles and clothes or pillows
fitted with foam rubber pads should not be dried in the
- Fabric softeners, or similar products, should be used as
specified by the fabric softener instructions.
- The final part of a washer dryer cycle occurs without heat
(cool down cycle) to ensure that the items are left at a
temperature that ensures that the items will not be damaged.
- Remove all objects from pockets such as lighters and
matches before use the appliance.
WARNING: Never stop a washer dryer before the end of
the drying cycle unless all items are quickly removed and
spread out so that the heat is dissipated.
Install Washer Dryer Machine
Unpacking the washer dryer machine
Unpack your washer dryer machine and check if there is any damage during the transportation.
Also make sure that all the items (as shown in Page 5) in the attached bag are received.
If there is any damage to the
machine during the transportation, or any item is
missing, please contact the local dealer immediately.
Dispose the packing materials
The packing materials of this machine may be dangerous to kids. Please dispose them
properly and avoid easy touch by kids. Please dispose the related packing materials
according to the relevant local regulations. Please do no throw the packing materials
away together with the other daily living rubbishes.
Remove transport bolts
Before using this
must be removed from the backside of
this machine. Please take the following steps to
remove the bolts:
1.Loosen all bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Select the location
Before installing the
machine, the location characterized as follows shall be
- Rigid, dry, and level surface (if not level, please make it level with reference to the
following figure “Adjust Leg”)
- Avoid direct sunlight
- Sufficient ventilation
- Room temperature is above 0 C
- Keep far away from the heat resources such as coal or gas.
Make sure that the
machine will not stand on power cord.
Do not install the washing machine on the carpet floor.
1.When positioning the
first check if the legs are closely attached to the
cabinet. If not, please turn them to their original
positions with hand or spanner and tighten the
nuts with spanner.
2.After positioning the
four corners on top cover of
in sequence. If the washing machine
stable when being pressed, this leg shall be
Overview of Washing Machine
Inlet Pipe H (optional)
Inlet Pipe C
Transport Hole Plug
Outlet Hose Support
3.Ensure the positioning status of washer dryer machine. Loosen the lock nut with spanner
and turn the leg with hand until it closely contacts with the floor. Press the leg with one
hand and fasten the nut closely to the cabinet with the other hand.
4.After being locked properly, press four corners again to make sure that they has been
adjusted properly. If it is still unstable, it has to repeat Steps 2 and 3.
Connect inlet pipe
Connect the inlet pipe as indicated in the figure.
For the model which has hot valve , please connect
the hot vale to hot water tap. Energy will decrease
automatically for some program.
Install inlet pipe
1.Connect the elbow to tap and fasten it
2.Connect the other end of inlet pipe to the inlet
valve at the backside of washing machine and
fasten the pipe tightly clockwise.
Notes: after connection, if there is any leakage
with hose, then repeat the steps to connect inlet
pipe. The most common type of tap shall be
used to supply water. If tap is square or too big,
then standard tap shall be changed.
Place outlet hose
There are two ways to place the end of outlet hose:
1.Put it beside the water trough.
5.Put a solid cylinder (e.g. pop cans) oppositely on the top cover of the
the left, right, front and back directions. If the cylinder keeps stable, the
positioned level. If it rolls, the
machine is positioned unlevel. The rolling direction is the
direction of lower ground surface.Then, the two legs in this direction shall be raised at the same time
machine is level. Steps 1~3 are repeated to make the bottom legs closely
the ground and the nuts shall be locked tightly.
2.Connect it to the branch drain pipe of the trough.
- As the maximum current through the unit is 10A when you are using its heating function,
please make sure the power supply system (current, power voltage and wire) at your
home can meet the normal loading requirements of the electrical appliances.
- Please connect the power to a socket which is correctly installed and properly earthed.
- Make sure the power voltage at your place is same to that in the machine's rating label.
- Power plug must match the socket and cabinet must be properly and effectively earthed.
- Do not use multi-purpose plug or socket as extension cord.
- Do not connect and pull out plug with wet hand.
- When connecting and pulling out the plug, hold the plug tightly and then pull it out. Do
not pull power cord forcibly.
- If power cord is damaged or has any sign of being broken, special power cord must be
selected or purchased from its manufacturer or service center for replacement.
Position outlet hose properly so that the floor will not be damaged by water leakage.
- When installing outlet hose, fix it
properly with a rope.
- Position outlet hose properly so that
the floor will not be damaged by water
- If outlet hose is too long, do not force
it into washer dryer machine as it will
cause abnormal noises.
If the machine has outlet hose support, please install it like the following pictures.
This machine must be earthed properly.
If there is any short circuit, earthing can reduce
the danger of electrical shock.
This machine is equipped with power cord, which includes plug, earthing wire at earthing
2.Washer dryer machine shall be operated in a circuit separate from other electrical
Otherwise, power protector may be tripped or fuse may be burned out.
Operate Washer Dryer Machine
Checklist and Preparation before Washing Clothes
Please read this operation method carefully to avoid the troubles of washing machine and
damages of clothes.
Check if the first-washed clothes will bed decolorized.
After a white towel touched with liquid detergent is used to wash the invisible corners of the
clothes, check if the white towel is stained with
clothes' original color.
As for the scarves and those clothes that easily
get decolorized among imported clothes, please
wash them separately before washing.
As for the stains on sleeves, collars and pockets,
use the liquid detergent and wash it with brush
gently. Finally put them into the washer dryer
to achieve more ideal washing effects.
As for temperature-sensitive clothes, they shall
be washed as required in the labels. Otherwise,
it may cause color change or distortion.
Keep in Mind:
Never put the clothes to be washed in washer dryer machine for a long period of time.
Otherwise it may get moldy and cause spots. Therefore, please wash the clothes in time.
The clothes also may get color changed or distorted if they are not washed according to
the stated washing temperature.
Clothes that can not be washed by washer dryer machine
The clothes that may get distorted if being immersed in water:
Ties, waistcoats, western-style clothes, outer garments etc. may have obvious shrinkage
if being immersed in water; the decolorized clothes such as blended spinning clothes of
artificial fiber etc.
Wrinkle-style clothes, embossed clothes, resin clothes etc. may get distorted when being
immersed in water. Among cotton and wool materials, the clothes that get easily distorted
are wrinkle-style silk, fur products and fur decorations;
Clothes with decoration, long dress and traditional clothes etc are the products to get
Please do not wash the clothes without material labels and washing requirements.
Never wash the clothes stained with the chemicals such as gasoline, petroleum, benzene,
paint thinner and alcohol.
Please pay attention with regard to detergents
“Low bubble” detergent or washing powder or washing powder special for drum washing
machine shall be selected according to fiber types (cotton, synthetic fiber, soft products and
wool products), colors, washing temperatures, dirty degrees and types. Otherwise,
excessive bubbles may be generated and overflowed out of the drawer so that accidents
may take place.
Bleacher belongs to alkali type and can damage clothes, so it is suggested to use as little
Powder detergents can easily leave the residues in the clothes so as to generate the bad
smell, so they shall be sufficiently rinsed.
Detergent can not easily get dissolved completely if there is too much detergent or water
temperature is rather low. It can remain in clothes, pipes and washing machines to
pollute the clothes.
Washing shall follow the weight of clothes, dirty degrees, local water hardness as well as
the recommendations from the detergent manufacturers. Please consult the water
company if you are not clear of water hardness.
Keep detergents and additives in safe and dry places out of touch by kids.
Checklist and Preparation before Washing Clothes
Please take out the items out of the pockets.
Please check the pockets of the clothes to be
washed, empty the rigid items such as
decorations and coins, otherwise washing
machine may be damaged or have abnormal
For the clothes to be washed, they are classified
according to the following characteristics:
The symbol types of care labels: the clothes to be
washed are classified into cotton, blended fiber, synthetic fiber, silk, wool and artificial fiber.
Color: white and colorful colors shall be identified. All new colorful articles shall be washed
in a separate way.
Size: the articles of different sizes are washed together to increase the washing effects.
Sensitivity: soft articles shall be washed separately. As for new pure wool textiles, curtains
and silks, the soft washing procedure shall be selected. Check the labels in all washing
The clothes shall be sorted before being put into washing machine. As for the curtains with
hooks, the hooks shall be removed before being washed.
The decorations on the clothes may damage the washing machine. As for the clothes with
buttons or embroideries, they shall be turned over before being washed.
Clean up fasteners:
Zips shall be zipped close and buttons or hooks shall be fixed. The loose band or ribbon
shall be bound together.
It is suggested to put bras into the pillow slip
with zip or buttons sealed to prevent the steel
wire from popping out of bras into the drum and
damaging the machine.
Especially delicate textiles such as laced curtains,
straight jackets, small articles (tight socks,
handkerchiefs, ties etc.) shall be put into string
bag for washing.
When washing a single big and heavy dress such
as Turkish towels, jeans, wadded jackets etc.,
it may easily cause great eccentricity and give
alarm due to great unbalance. Therefore it is
suggested to add one or two more clothes to be
washed together so that draining can be done
Clean away dusts, stains and pet hairs from the clothes.
The clothes may be damaged and disturb washing effects during the friction between
dusts, stains and clothes.
To protect baby skin
Baby articles (baby clothes and towels) including napkins shall be washed separately.
If they are washed together with the adults' clothes, they may be infected. Rinsing times
shall be increased to ensure the thorough rinsing and cleaning without the detergent
It is suggested that the parts that are easily stained such as white sockets, collars
and sleeves etc. shall be hand washed before being put into washing machine to
achieve more ideal washing effects.
Please use powder or liquid detergents. The residues of the soap could remain in the
gaps of the clothes if soap is used.
Confirm the washing capacity:
Do not put excessive washings; otherwise it may affect the washing effects. Please
confirm the maximum affordable washing quantity according to the following table.
Pre-wash cotton cloth
New-developed washing machine together with new-developed detergent can make
washing perfect, which can save energy, time, water and detergent. But if cotton cloth is
very dirty, albumen-based detergent can be used for pre-washing.
The clothes which easily get fuzzed shall be turned over for washing
The clothes which easily get fuzzed shall be washed separately; otherwise the other
articles can be stained with dust and thrum etc. Preferably, black clothes and cotton
clothes shall be washed separately because they can easily get stained with the thrums
of other colors when being washed together.
Please check before washing.
Washing machine shall not wash water-proof materials (ski suits, outside napkin
As for the fiber products that water can not get soaked easily into such as water-proof
cushions, and clothes, it is better not to wash. Otherwise there will be water bursting out
or abnormal vibration to cause danger while rinsing and draining so that the clothes also
may be damaged. (Such as outside napkin pads, raincoats, umbrella, ski suits, car covers,
sleeping sacks etc.)
Cautions during Draining
Draining of normal clothes:
Moistures of washings are drained through drain hole.Draining of water-proof clothes
and fiber products:
In the normal washing and draining status, moistures of water-proof clothes and fiber
products can not be drained while washing water is gathered in one direction so that the
eccentricity of washing machine is too great and vibration or moving is caused.
the proper drying time according to their load.
Note: The rated capacity is the maximum capacity, make sure that the dry clothes which are
loaded to the appliance do not exceed the rated capacity each time.
Rotary Switch Function
There are 15 types of washing selection functions in display. For example:
Auto Intensive: 40
Auto Gentle: 30
Synthetic: 20 , 30 , 40 ,60
, Cold Kidswear :20 , 30 , 40
Down:20 , 30 , 40 ,60
, Cold Active Enzyme:60
Drum clean: 90
Cotton:20 , 30 , 40 ,60 ,90
Quick15':20 , 30 , 40
, Cold Mixed: 20 , 30 , 40 ,60 ,90
Jeans:20 , 30 , 40 ,60
, Cold Wool:20 , 30 , 40
Wash Only:20 , 30 , 40 ,60 ,90
,Cold Spin Only: -
Notes: Control panel could be changed without written notice. Please visit the website of
Washing Machine or call up the service line for consultation.
First, turn the rotary switch to select the corresponding procedures according to the types
Second, select the proper temperature according to the dirtiness. Generally, the higher
the temperature is, the more the power is consumed.
Last, select the proper revolution speed. The normal textiles are recommended with
1000~1200rpm and the delicate textiles with 600~800rpm. The higher the revolution
speed is, the drier the textiles are spun, but higher the noises will also be increased.
The surfaces of delicate textiles will have wrinkles and the working life of washing
machine will be shortened.
to protect the clothes, the lower revolution speed shall be selected for delicate
textiles. The main washing procedures depend on the types of the clothes to be washed. The main
washing troubles can be selected as follows:
dirty clothes (Default
dirty clothes (Default
You can select this procedure to wash the quite delicate clothes. The procedure is shorter
compared with that for cottons and the washing intension is quite gentle. It is
recommended to wash synthetic articles, for example: shirts, coats, blending. As for
curtains and laced textiles, the procedure “Synthetic ” shall be selected. While washing
the knitting textiles, detergent quantity shall be reduced due to its loose string construction
and easily forming bubbles.
Baby care procedure with an extra rinse, it can make the baby's wear cleaner and make the
rinse performance better to protect the baby skin.
- Active Enzyme
is suit for
the washing time
according to the load.
is suit for
the washing time
according to the load.
This program is specially designed for washing down coats.
In this cycle
This cycle is specially set in this machine to clean the drum and tube. It applys 90
temperature sterilization to make the clothes washing more green. When this procedure
is performed, the clothes or other washing cannot be added. When proper amount of
chlorine bleaching agent is put in, the barrel cleaning effect will be better. The customer
can use this procedure regularly according to the need.
Washing Clothes at first time
Before washing clothes at first time, the washing machine shall be operated in one round of
the whole procedures without clothes in as follows:
1.Connect power source and water.
2.Put a little detergent into the box and close it.
3.Press the button “
4.Press the button “Start/Pause”.
The drawer is separated as follows:
I: Pre-detergent or washing powder.
II: Main detergent, softener, pre-dip,
bleaching or decontaminating products.
: Washing additive, such as fabric softener or tackifier.
Put detergent into washing machine.
1.Pull out the drawer.
2.Fill pre-detergent into Case I (when necessary).
3.Fill detergent into Case II.
4.Fill softener into Case (when necessary).
Start up washing machine
Connect the power. Check if water pipes are connected properly. Open the tap completely.
Put in the clothes to be washed and fill in the detergent and tackifier. Then press the button
”,Select the proper procedures and functions and press the button “Start/Pause”.
Select the procedure
The proper washing procedures shall be selected according to the types, quantities, and
dirtiness of the clothes to be washed in combination with the following washing
option1: detergent (powder) . option2(liquid)
- As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box,
it is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked
and overflowing while filling water.
- Please choose suitable type of detergent for the various washing temperature to get the best washing
effect with less water and energy consumption.
Seriously besmirched, pure white cotton or flax (for example: coffee
table cloths, canteen table cloths, towels, bed sheets)
Moderately besmirched, colorful flax, cotton and synthetic articles
with certain decolorizing degree (for example: shirts, night pajamas;
Slightly besmirched, pure white flax (for example: underwear)
Normally besmirched articles (
synthetic and wool)
You can select this procedure to wash the daily washable clothes. The washing period
is quite long with quite strong washing intension. It is recommended to wash the daily
cotton articles, for example: bed sheets, quilt covers, pillowcases, gowns, underwear etc.
This procedure is suitable for washing few and not very dirty clothes quickly.
You can select this procedure wash the tough cltohes, that need much more time and
strength .It is used for the daily clothes fo cotton,such as sheets, chained, pillowcases
bathrobe and underwear.
You can select this program to wash the wool textiles labeled with “Machine Wash”.
Please select the proper washing temperature according to the label on the articles to be
washed. Furthermore, the proper detergent shall be selected for wool textiles.
Separate Wash Only Procedure.
Separate Spin only procedure. Soap water or rinse water shall be drained out before spinning.
procedure to drying clothes.
Bubble Removal Function
Bubble Check Function: Redundant bubbles will occur when there is excessive detergent,
which will affect Wash and Rinse effects. The procedure will check automatically and one
bubble removal procedure will be added automatically to remove bubbles when excessive
bubbles are checked.
This program is specially designed for washing jeans.
- Child lock
To avoid that the washing procedure can not operate normally due to the mis operation by
kids during the washing procedure, you can select this function.
Press Function and Dry button together during the running procedure with the light will be on,
Start/Pause button as well as the rotary switch are locked except
Press the two buttons together and the light will be off and release to locking.
But cut off the power supply , the kids protection is also release to locking. The kids protection
will not be cancelled after all procedures are completed.
The Special function
Table of Washing and drying Procedures
Means optional Means not necessary
The parameters in this table are only for user's reference. The actual parameters maybe
different with the parameters in above mentioned table.
Before your maintenance starts, please do pull out the power plug or disconnect power
and close the tap.
- Solvents are forbidden to avoid that the washer dryer machine is damaged, and toxic gases
are generated or exploded.
- Never use water to sprinkle and wash the machine.
- It is forbidden that the detergents containing PCMX are used to clean the machine.
Cleaning and Maintenance of Washing Machine Cabinet
Proper maintenance on the washing machine can extend its working life. The surface can
be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any
water overflow, use the wet cloth to wipe it off immediately. No sharp items are allowed to
strike the cabinet.
Notes: formic acid and its diluted solvents or equivalent are forbidden.
Clean Internal Drum
The rusts left inside the drum by the metal articles shall be removed immediately with
Never use steel wool.
Dispose a Frozen Washer dryer Machine
When the temperature drops below zero and your washer dryer machine gets frozen, you may:
1.Disconnect the power supply for the machine.
2.Wash the tap with warm water to loosen inlet pipe.
3.Take down inlet pipe and immerse it in warm water.
4.Pour warm water into washing drum and wait for 10 minutes.
5.Reconnect inlet pipe to the tap and check whether inlet and outlet are working normally.
Notes: when the washing machine is reused, make sure the ambient temperature is above 0 C
If your machine is located in the room where it can get frozen easily, please drain the remaining
water inside drain pipe and inlet pipe thoroughly.
Remove the remaining water in inlet pipe
1.Close the tap.
2.Screw off the inlet pipe from tap and put its end into the container.
3.Start up any procedure except single Wash or Drain
procedure. Water will be drained out of inlet pipe if any
for about 40 seconds.
4.Reconnect the inlet pipe to tap.
Remove the remaining water in drain pump
o avoid burning, it shall be done after the hot water
inside the machine cools down.
Clean detergent box and grooves
Clean detergent drawer and grooves
1.Press down the arrow location on softener cover
inside the drawer.
2.Lift the clip up and take out softener cover and wash
all grooves with water.
3.Restore the softener cover and push the drawer into
Clean inlet filter
Inlet filter shall must be cleaned if there is not any or
insufficient water in when the tap is opened.
Clean the tap filter:
1.Close the tap.
2.Select any procedure except “Wash” or Rinse&Spin”
3.Press the button “START/PAUSE” and keep the
procedure running for about 40 seconds.
4.Remove the inlet pipe from the tap.
5.Use water to wash the filter.
6.Reconnect the inlet pipe.
Washing the filter in washer dryer machine:
1.Screw off the inlet pipe from the backside of the
2.Pull out the filter with long nose pliers and reinstall
it back after being washed.
3.Reconnect the inlet pipe.
4.Open the tap and make sure there is no water leakage.
5.Close the tap.
Notes: Generally, the tap filter is washed first and then the filter in washing machine will be washed.
If only the filter in washing machine is washed, then the steps 1~3 in cleaning the tap filter shall be
Pull out the power plug to avoid electrical shock before washing.
After using the washing machine, pull out the power cord and close the door tightly to avoid
pinching the kids.
Remove foreign matters
Drain Pump Filter:
Drain pump filter can filter the yarns and small foreign matters from the washings.
Clean the filter periodically to ensure the normal operation of washing machine
Cleaning the pump
According to the soil level within the cycles and the frequency of the cycles,you have to inspect
clean the filter regularly.
The pump should be inspected if the machine does not empty and/or spin;
The machine makes an unusual noise during draining due to objects such as safety pins,coins etc.
blocking the pump.
1 Disconnect the appliance;
2 If necessary wait until the water has cooled down.
3 Open the service panel .Place a container close to collect any spillage.
4 When no more water comes out, unscrew the pump cover and remove it.
Always keep a rag nearby to dry up spillage of water when removing the cover.
5 Remove any objects from the pump impeller by rotating it.
6 Screw the pump cover fully in.
7 Close the service panel.
When the appliance is in use and depending on the programme selected there can be
hot water in
until the appliance has
Never remove the pump cover during a wash cycle, always wait
finished the cycle, and is empty. When replacing the cover, ensure it is securely retightend so as to
stop leaks and young children being able to remove it.
First, drain the water with drain pump and then open the drain pump to clean away foreign
matters from drain pump filter.
Take care if the drained water is hot.
Proceed as follows:
Unscrew the pump cover
Close the service panel
Open the service panel
Remove the pump cover
cannot start up
Check if the door is closed tightly.
Check if power plug is inserted well.
Check if water supply tap is opened.
Check if button “Start/Pause” is pressed.
Check if button “
” is pressed.
Door cannot be
the bottom of the
residues in the
are not good
The clothes are too dirty.
Insufficient detergent quantity.
Washing powder is dampened
Power is disconnected.
PC board has problems.
Harness has connection
The inlet pipe is not connected
Outlet hose has water leakage.
NTC is damaged and heating
pipe is aging.
Machine's safety protection
design is working.
The connection between inlet
pipe or outlet hose and tap or
washing machine is not tight.
Drain pipe in the room is blocked.
Disconnect the power.
Can normally wash the clothes.
Only cannot wash with heating.
Shall contact the service center promptly.
Check and fasten water pipes.
Clean up outlet hose and ask a
specialized person to repair it when
Fix the inlet pipe.
Replace the drain hose.
Check if the power is shut down and
power plug is connected correctly.
If not, please call up service line.
Clean and wipe the box.
Use liquid detergents or the detergents
special for drum.
Select a proper procedure.
Add the proper detergent quantity
according to the instructions in
Check if the fixing (bolts) has been removed.
If cabinet is installed on the solid and level
Check if there are any barrettes or metal
Check if the legs in the washing machine
are adjusted level.
Remove the problems
The label and sign on the fabric can help you to choose the best way to launder your clothes.
Do not iron
Do not dry clean
Cool iron(max 110
Dry clean normal cycle
with any solvent
Dry clean normal cycle
petroleum solvent only
Tumble dry normal
Hang to dry
Tumble dry. Low heat
Tumble dry. Medium
Do not bleach
Do not wash
Wa r m w a s h
may be used
not be used
Do not tumble dry
Iron with cloth
Dry after wash
Line Dry in shade
Warmly dry clean
No machine wash
To avoid fire,electrical shock and other accidents,please remember the following reminding:
- Only the voltage indicated in power label can be used. If you are not clear of the voltage
at home, please contact the local power bureau.
- When you are using the heating function, the maximum current through the washing
machine will reach 10A. Therefore, please make sure the power supply units (current,
voltage and cable) can meet the normal load requirements for the machine.
- Protect the power cord properly. Power cord shall be fixed well so that it will not trip the
people or other things and be damaged. Special attention shall be paid to the socket. It
shall be plugged into the sockets easily and attention shall be paid to the plug location.
- Do not make the wall-mounted socket overloaded or cable extended. Overloading of the
wiring may cause fire or electrical shock. Do not pull out power plug with wet hand.
- To ensure your safety, power plug shall be inserted into an earthed three-pole socket.
Carefully check and ensure that your socket is properly and reliably earthed.
Door is not closed properly.
Restart after the door is closed.
Please call up service line if there are still troubles.
Tap is not opened or water
flows too slowly.
Inlet valve filter is blocked.
Inlet pipe is twisted.
If water is not supplied
Open the tap or wait till the
water supply becomes normal.
Check inlet valve filter.
Straighten the water pipe
Check the other taps in the
Please call up service line if there are still troubles.
Please call up service line if there are still troubles.
Outlet hose is blocked or twisted
Drain pump is blocked
Wash and straighten outlet hose.
Wash drain pump filter
Please call up the service line if there is any other problem.
Standard Water Pressure
ADDITIONAL INFORMATION FOR
1. Water connections:Cold &
2. Water supply pressure:
3. Warm wash Program:
Cold wash program: Cotton Cold( no temperature display is cold wash)
4. Detergent type:
5. Detergent quantity:
6. Adding detergent:
The detergent is dissolved and added as Paragraph B7.3
The detergent shall be dissolved in 1 L
7. Anti-sudsing agent:
8. Test load mass:
9. Water consumption:
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING
The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or
improper use of the appliance.
The manufacturer is not responsible for any inaccuracies, due to printing or transcription errors, contained in this
handout. In addition, the appearance of the figures reported is also purely indicative.
The manufacturer reserves the right to make changes to its products when considered necessary and useful, without
affecting the essential safety and operating characteristics.
Technika constantly seeks ways to improve the specifications and designs of their products.
Whilst every effort is made to produce up to date literature, this document should not be regarded as an infallible guide.
Actual product only should be used to derive cut out sizes.
All Technika Appliances must be installed by a qualified person/s with adherence to the relevant electrical, plumbing and
AGA codes, with compliance being issued as required by state or national legislation.
Additionally all Technika Upright cookers must have chains installed correctly in adherence to the relevant AGA, and
plumbing codes by the Licenced installer.
For maximum effectiveness and efficiency all rangehoods should be installed with the use of ductwork, by a licenced
installer with adherence to the relevant state and national building codes and regulations.
All Technika appliances are for Domestic use only, and must be installed by a licence installer into Domestic Applications
only, without exception and to the required Authorities guidelines. Any installation outside of this will VOID warranty.
Alfresco areas are not a Domestic application.