TechPlay RT-95 Instruction Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

RT-95

RETRO WOODEN TURNTABLE WITH CD/MP3 PLAYER, AM/FM RADIO,

AUX IN, USB RECORDING AND BLUETOOTH

INSTRUCTION MANUAL

READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE

PRODUCT FEATURES

- 33/45/78

RPM

SELECTABLE

TURNTABLE

AUTOMATIC / MANUAL STOP TURNTABLE

BELT DRIVEN SYSTEM

BLUETOOTH WIRELESS MUSIC STREAMING WITH NFC FUNCTION

PRORAMMABLE CD/MP3 PLAYER

DIRECT USB ENCODING FOR CD, TURNTABLE, FM RADIO & AUX IN

AUX IN FOR CONNECTION OF OTHER DEVICE (EG. CD & MP3 PLAYER)

USB SLOT FOR MP3 PLAYBACK

PLL RADIO WITH PRESET 20 AM & 30 FM STATIONS

- CLOCK

ALARM

TIMER TO SWITCH ON AND OFF

‘CD DISPLAY WITH BLUE BACKLIGHT

- RCA

LINE-OUT

STEREO BUILT-IN SPEAKER

45RPM ADAPTOR, EXTERNAL POWER

ADAPTOR & REMOTE CONTROL

LOCATION OF CONTROL

1) PLAY / PAUSE

2) STOP
3)  MODE / CLK
4)  STANDBY / BT INDICATOR
5) CD

PLAYER

6) LCD

DISPLAY

7) TUNING / SKIP DOWN

8) TUNING / SKIP UP

9) OPEN/CLOSE
10)  POWER / VOLUME KNOB
11) USB SLOT
12)  REMOTE CONTROL RECEIVER
13)  CD / USB
14) PHONO / AUX
15) X-BASS
16)  TIMER / SLEEP
17)  REC / DEL
18)  TUNER / BAND
19) EARPHONE JACK
20)  AUX IN JACK
21)  ALBUM / PRESET UP & DOWN
22) FM WIRE ANTENNA
23)  EXTERNAL POWER ADAPTOR JACK
24)  RCA LINE-OUT JACK
25)  RCA LINE-OUT JACK

26) 45 RPM ADAPTOR
27) LIFT LEVER (FOR RECORD PLAY / PUASE)
28) AUTO STOP ON/OFF BUTTON
29) 33/45/78 RPM SPEED SELECTOR

30)

TONE ARM

CAUTION:

USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.

WARNING:

THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

- BATTERIES (BATTERY PACK OR BATTERIES INSTALLED) SHALL NOT BE EXPOSED TO

EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE.

THE MAINS PLUGS OR AN APPLIANCE COUPLER IS USED AS THE DISCONNECT DEVICE, AND
THE DISCONNECT DEVISE SHALL REMAIN READILY OPERABLE.

PRECAUTIONS FOR USE

INSTALLATION



UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.



DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.



DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.

CONNECTION

1. CONNECT

EXTERNAL POWER ADAPTOR

EXTERNAL POWER ADAPTOR JACK

2. PUSH

THE

POWER KNOB

TO SWITCH ON THE UNIT,

STANDBY INDICATOR (RED COLOR)

WILL BE OFF.

IF THE BACKLIGHT ON THE LCD DISPLAY LIGHTS UP, IT MEANS THE POWER SUPPLY IS NORMAL, NOW
YOUR SYSTEM IS READY FOR USE.

SETTING THE CLOCK

1 WHEN

THE

STANDBY INDICATOR (RED COLOR)

LIGHT UP, UNIT IS IN THE STANDBY MODE.

DURING STANDBY MODE, SELECT BETWEEN 12H OR 24H MODE: PRESS AND HOLD

MODE BUTTON

FOR 3-5 SECONDSS, 12H / 24H WILL BE FLASHING. TURNING

SKIP UP

SKIP DOWN

KNOB TO SELECT

12H / 24H MODE. PRESS

MODE BUTTON

AGAIN TO CONFIRM.

SETTING HOUR: TURNING

SKIP UP

SKIP DOWN

KNOB TO SELECT THE CORRECT HOUR, THEN

PRESS

MODE BUTTON

AGAIN TO CONFIRM.

SETTING MINUTE: AFTER STEP 3 IS COMPLETED, TURNING

SKIP UP

SKIP DOWN

KNOB TO SELECT

THE CORRECT MINUTE, THEN PRESS

MODE BUTTON

AGAIN TO CONFIRM.

SETTING ALARM

1. DURING STANDBY MODE, HOLD

TIMER BUTTON

FOR 3-5 SECONDS. SETTING ALARM SEQUENCE IS

“ALARM ON TIME > ALARM OFF TIME > ALARM MODE > ALARM VOLUME”.

2. SETTING ALARM ON TIME: “ON” IS LIGHTING ON THE DISPLAY

i. SETTING

HOUR:

TURNING

SKIP UP

SKIP DOWN

KNOB TO SELECT THE CORRECT

HOUR, THEN PRESS

TIMER BUTTON

AGAIN TO CONFIRM.

ii. SETTING

MINUTE:

TURNING

SKIP UP

SKIP DOWN

KNOB TO SELECT THE CORRECT

MINUTE, THEN PRESS

TIMER BUTTON

AGAIN TO CONFIRM.

3. SETTING ALARM OFF TIME: “OFF” IS LIGHTING ON THE DISPLAY:

i. SETTING

HOUR:

TURNING

SKIP UP

SKIP DOWN

KNOB TO SELECT THE CORRECT

HOUR, THEN PRESS

TIMER BUTTON

AGAIN TO CONFIRM.

ii. SETTING

MINUTE:

TURNING

SKIP UP

SKIP DOWN

KNOB TO SELECT THE CORRECT

MINUTE, THEN PRESS

TIMER BUTTON

AGAIN TO CONFIRM.

4. SETTING ALARM MODE: “TUNE” IS LIGHTING UP ON THE DISPLAY:

i. TURNING

SKIP UP

SKIP DOWN

KNOB TO SELECT THE ALARM MODE.

ii.

SEQUENCE IS TUNER > CD > USB, PRESS

TIMER BUTTON

AGAIN TO CONFIRM.

5. SETTING ALARM VOLUME: “V - ” IS LIGHTING UP ON THE DISPLAY:

i. TURNING

SKIP UP

SKIP DOWN

KNOB TO SELECT THE ALARM VOLUME, PRESS

TIMER

BUTTON

AGAIN TO CONFIRM.

SETTING ALARM IS COMPLETED, THE DISPLAY WILL SHOW THE SETTING AGAIN FOR USER’S

CHECKING

7. “CLOCK” ICON IS FLASHING WHEN ALARM IS IN ACTIVE. “CLOCK” ICON LIGHTS UP WHEN ALARM IS

SETTING IS STORED BUT NOT IN ACTIVE YET.

8. CANCEL ALARM: DURING STANDBY MODE, WHEN “CLOCK” ICON IS ON, PRESS

TIMER BUTTON

“CLOCK” ICON WILL BE OFF.

SNOOZE FUNCTION

PRESS “SNOOZE” BUTTON ON THE REMOTE CONTROL WHEN ALARM IN ACTIVE, ALARM WILL BE SLIENT
FOR 10 MINUTES. AFTER 9-10 MINUTUE SNOOZE INTERVAL, ALARM WILL BE ACTIVE AGAIN. SNOOZE CAN
BE USED FOR REPEATEDLY WITHIN THE 1-HOUR ALARM ACTIVE INTERVAL.

TIMER FUNCTION

1. PUSH

THE

POWER KNOB

TILL THE

STANDBY INDICATOR

(RED COLOR)

LIGHT OFF. UNIT IS TURNING

FROM STANDBY MODE TO OPERATION MODE.

2. WHEN THE UNIT IS TURNED ON, PRESS

SLEEP

BUTTON REPEATEDLY TO CHOOSE THE SLEEP TIME

MINUTES FROM 90>80>70…..>10 OFF.

3. SLEEP TIME SETTING IS STORED WHEN THE “SLEEP” ICON LIGHTS UP ON THE DISPLAY.
4. WHEN THE SLEEP TIME MINUTES IS OVER, UNIT WILL BE SWITCHED TO STANDBY MODE

AUTOMATICALLY.

LISTENING TO RADIO

RADIO TUNING

1. PRESS

TUNER BUTTON

TO ACTIVATE “TUNER” MODE.

2. SELECT THE DESIRED BAND BY RADIO

TUNRER BUTTON

(AM OR FM) AGAIN.

3. TUNE TO THE REQUIRED STATION BY PRESSING

TUNING DOWN

& SKIP UP

BUTTON

FOR 1-2

SECONDS, AND THEN RELEASE.

4. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP WHEN A RADIO STATION IS FOUND.

MANUAL PRESET RADIO STATIONS

1. WHEN THE DESIRED RADIO STATION IS FOUND, PRESS

MODE

BUTTON, PROGRAM NUMBER WILL BE

FLASHING.

2. PRESS

PRESET UP OR PRESET DOWN

TO CHOOSE THE PROGRAM NUMBER FOR STORING THE

DESIRED RADIO STATION.

3. PRESS

MODE

BUTTON AGAIN TO CONFIRM, PROGRAM NUMBER WILL STOP TO FLASH.

4. REPEAT STEP 2 & 3 UNTIL ALL DESIRED RADIO STATIONS IS BEING FOUND AND STORED
5. TURN

PRESET UP OR PRESET DOWN

KNOB

TO CHOOSE THE PRESET RADIO STATIONS.

6. THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE RECEPTION OF

DIFFERENT AREA AND COUNTRIES.

AUTO PRESET RADIO STATIONS

1. DURING RADIO MODE, PRESS THE

PLAY

BUTTON, THE UNIT WILL AUTOMATICLLY SCAN THE RADIO

FREQUENCY. WHEN THE CLEAR SIGNAL IS FOUND, IT WILL AUTOMATICALLY STORE THE RADIO
STATION, STARTING FROM PROGRAM NUMBER 1.

2. THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE RECEPTION OF

DIFFERENT AREA AND COUNTRIES.

FM & FM-STEREO RECEPTION

PRESS “FM ST.” BUTTON ON THE REMOTE CONTROL TO SELTECT FM MONO OR FM STEREO MODE. WHEN
STEREO SIGNAL ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO.

HINTS FOR BETTER RECEPTION

1. AM: THERE IS A BUILT-IN AM BAR ANTENNA. IF AM RECECPTION IS WEAK, SLIGHTLY ROTATING OR

RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.

2. FM : THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE

SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION.

FM & FM-STEREO RADIO ENCODING

1. PRESS

TUNER BUTTON

TO ACTIVATE “TUNER” MODE AND SELECT THE DESIRED BAND BY RADIO

BAND

BUTTON

(AM OR FM).

2. INSERT MEMORY DEVICE (USB DRIVE)
3. PRESS

THE

REC

BUTTON, IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE. THEN USB ICON

WILL BE FLASHING.

4. THE USB ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.

5. TO FINISH ENCODING, PRESS

STOP

BUTTON

AND DISPLAY WILL SHOW “END” AND RETURN TO

“ TUNER” MODE.

REMARK:-

THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLAYING TIME OF FM OR FM-ST
RADIO

THE RECORDING FORMAT IS PRESET AT – MP3

BIT RATE : 128 KBPS

DURING FM & FM-STEREO RADIO ENCODING, RADIO FREQEUNCY IS FXIED AND CANNOT BE TUNED

PHONO & ENCODING

NOTED:

REMOVE THE STYLUS PROTECTOR.

BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM
REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS.

1. PRESS

FUNCTION

BUTTON TO SELECT “PHON” ON DISPLAY.

2. SET

THE

SPEED SELECTOR

TO THE PROPER POSITION DEPENDING ON THE RECORD TO BE PLAYED.

3. PLACE THE RECORD ON THE PLATTER, USE THE 45 RPM ADAPTOR IF REQUIRED.
4. PUSH

THE

LIFT LEVER

UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK,

AND THEN SLOWLY MOVE IT TO THE RECORD SIDE. THE PLATTER WILL START TO
ROTATE.

5. PUT

DOWN

THE

LIFT LEVER

TO DROP THE TONE ARM AND TOUCH THE RECORD

GENTLY. PHONO PLAYING STARTS NOW.

PUSH THE

LIFT LEVER

UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK,

NOW PLATTER WILL STILL BE ROTATING BUT PHONO PLAYING WILL STOP. TO CONTINUE THE PLAYING,
THE USER NEEDS TO PUT DOWN THE

LIFT LEVER.

7. ADJUST THE VOLUME TO THE DESIRED LEVEL.
8. AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING. PUSH THE

LIFT LEVER

UPWARD TO RAISE THE TONE ARM AND MOVE IT TO THE ARM PARK, AND THEN PUT DOWN THE

LIFT

LEVER

9. TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE ARM PARK.

REMARK

: AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL

STOP BEFORE THE LAST TRACK FINISHES. IN THIS CASE, SELECT THE

AUTO-STOP SWITCH

TO “ OFF

“ POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN
OFF THE UNIT BY POWER BUTTON OR SWITCH BACK THE

AUTO-STOP SWITCH

TO “ ON “ POSITION TO

STOP THE PLATTER ROTATE). THEN PUT BACK THE TONE ARM TO THE ARM PARK.

PHONO ENCODING

1. PRESS

PHONO

BUTTON TO ACTIVATE “PHONO” ON DISPLAY AND THEN INSERT USB MEMORY DEVICE.

2. INSERT MEMORY DEVICE (USB DRIVE)
3. PRESS

THE

REC

BUTTON, IT WILL TAKE AROUND 5-10 SECONDS TO READ MEMORY DEVICE. THEN

USB ICON WILL BE FLASHING.

4. THE USB ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
5. TO FINISH ENCODING, PRESS

STOP

BUTTON

AND DISPLAY WILL SHOW “END” AND RETURN TO

PHONO MODE.

REMARK:-

THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE PHONO

THE RECORDING FORMAT IS PRESET AT – MP3

BIT RATE : 128 KBPS

AUX IN JACK & ENCODING

PRESS

AUX BUTTON

TO ACTIVATE “AUX” ON DISPLAY, THEN CONNECT THE EXTERNAL AUDIO DEVICE

(SUCH AS CD PLAYER) THROUGH THE

AUX IN JACK

. AUDIO SIGNAL FROM THE EXTERNAL AUDIO DEVICE

CAN BE PLAYED THROUGH THE SYSTEM.

AUX IN ENCODING

1. PRESS

AUX BUTTON

TO SELECT “AUX” ON DISPLAY, THEN INSERT MEMORY DEVICE (USB

DRIVE)

2. INSERT MEMORY DEVICE (USB DRIVE)

3. PRESS

THE

REC

BUTTON, IT WILL TAKE AROUND 5-10 SECONDS TO READ MEMORY DEVICE. THEN

USB ICON WILL BE FLASHING.

4. THE USB ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
5. TO FINISH ENCODING, PRESS

STOP

BUTTON

AND DISPLAY WILL SHOW “END” AND RETURN TO

“AUX” MODE.

REMARK:-

THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE EXTERNAL
AUDIO DEVICE.

THE RECORDING FORMAT IS PRESET AT – MP3

BIT RATE : 128 KBPS

PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA

CONNECTING

THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 / WMA FILE WHICH STORED IN THE MEMORY
MEDIA WITH USB CONNECTING PORT.

PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING INTO COMPLETELY, INSERT
STRAIGHT WITHOUT BENDING.

CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO SYSTEM OR THE
STORAGE MEDIA (USB DRIVE). CHECK TO BE SURE THE DIRECTION IS CORRECT BEFORE
CONNECTION.

PRESS

USB

BUTTON TO SELECT “USB” MODE, THEN INSERT USB MEMORY DEVICE.

THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY, AND DISPLAY WILL SHOW
THE TOTAL NUMBER OF MP3/WMA FILES (EG. 016).

THEN THE SYSTEM WILL START AUDIO PLAYBACK FROM USB DEVICE AUTOMATICALLY.



PLAY / PAUSE BUTTON

PRESS

THE

“

PLAY/PAUSE

”

BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO

CONTINUE.



STOP BUTTON

PRESS

STOP

BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE

TOTAL NUMBER OF MP3/WMA FILES. AND THEN USER CAN PRESS

“SKIP UP”

OR “SKIP

DOWN

”

BUTTON TO SELECT FILE FORWARD OR BACKWARD.



SKIP UP

/ SKIP DOWN

BUTTON

DURING MP3/WMA PLAYBACK, PRESS

SKIP UP

BUTTON ONCE TO PLAY THE NEXT FILE.

PRESS AND HOLD

SKIP UP

BUTTON CONTINUOUSLY TO SPEED UP SELECTING

FORWARD.

DURING MP3/WMA PLAYBACK, PRESS

SKIP

DOWN

BUTTON ONCE TO PLAY THE PREVIOUS

FILE. PRESS AND HOLD

SKIP

DOWN

BUTTON CONTINUOUSLY TO SPEED UP

SELECTING BACKWARD.



FOLDER SEARCHING

TURN

ALBUM DOWN

& UP

KNOB

LEFT OR RIGHT TO SEARCH FOLDER BACKWARD OR FORWARD.



REPEAT ONE / REPEAT ALBUM / REPEAT ALL / RANDOM / INTRO PLAYBACK FUNCTION

DURING AUDIO PLAYBACK, PRESS

MODE

BUTTON TO SELECT

REPEAT ONE / REPEAT ALBUM /

REPEAT ALL / RANDOM / INTRO

MUSIC PLAYBACK FROM USB DEVICE

REMARK

IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3
ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS
NOT A MALFUNCTION OF THE SYSTEM.

THERE ARE NUMEROUS USB DEVICE PRODUCERS ARE. SOLUTION AND FORMAT ARE VARIABLE
BETEEN EACH OTHER. THEREFORE, WE DO NOT GARANTTEE THIS UNIT CAN SUPPORT ALL USB
DEVICE FROM EVERY BRAND.

TRACKS PROGRAMMING

UP TO 99 TRACKS CAN BE PROGRAMMED FOR MP3/WMA FILE AND PLAY IN ANY ORDER. BEFORE USE, BE
SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:

1. SET AT “USB” MODE, THEN PRESS

STOP

BUTTON.

2. PRESS

MODE

BUTTON, “MEM” WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE

PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.

3. SELECT A DESIRED FOLDER BY PRESSING

SKIP UP

SKIP DOWN

BUTTON

, THEN

PRESS

MODE

BUTTON TO CONFIRM.

4. THEN SELECT A DESIRED TRACK BY PRESSING

SKIP UP

SKIP DOWN

BUTTON

, THEN

PRESS

MODE

BUTTON TO CONFIRM.

5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS “

PLAY/PAUSE

”

BUTTON

TO PLAY THE TRACKS IN ASSIGNED ORDER.

7. PRESS

STOP

BUTTON

TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS

STOP

BUTTON

AGAIN TO

CANCEL PROGRAMMING.

FILE DELETE FROM USB DEVICE

THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB DRIVE BY FOLLOWING:-

I) DELETE 1 TRACK

1. PRESS

AND

HOLD

DEL

BUTTON FOR 3-5 SECONDS DURING THE PLAYBACK OF THE DESIRED TRACK,

THEN “ONE” WILL BE FLASHING ON THE DISPLAY. PRESS

DEL

BUTTON AGAIN TO CONFIRM.

“DELETE” WILL BE SHOWN ON THE DISPLAY.

“DELETE” WILL DISAPPEAR ON THE DISPLAY, IT MEANS THE TRACK IS DELETED.

II) DELETE 1 FOLDER

1. INSERT THE USB DRIVE, SET IN “USB” MODE & SET AT STOP MODE AFTER UNIT READING.
2. TURN

ALBUM DOWN

ALBUM UP KNOB

TO SEARCH DESIRED FOLDER FOR DELETING.

3. PRESS

AND

HOLD

DEL

BUTTON FOR 3-5 SECONDS, “DEL” WILL SHOW ON THE DISPLAY. PRESS

SKIP

/ SKIP DOWN

BUTTON

TO SELECT “DIR” ON THE DISPLAY. PRESS

DEL

BUTTON AGAIN TO

CONFIRM.

4. “DELETE” WILL BE SHOWN ON THE DISPLAY. AFTER “DELETE” DISAPPEARS IT MEANS THE DESIRED

FOLDER IS DELETED.

II) DELETE ALL TRACK

1. INSERT THE DRIVE, SET IN “USB” MODE & SET AT STOP MODE AFTER UNIT READING.
2. PRESS

AND

HOLD

DEL

BUTTON FOR 3-5 SECONDS, THEN “ONE” WLL BE FLASHING ON THE DISPLAY.

PRESS

SKIP UP

/ SKIP DOWN

BUTTON

TO SELECT “ALL” ON THE DISPLAY. PRESS

DEL

BUTTON AGAIN TO CONFIRM.

3. USB ICON WILL BE FLASHING ON THE DISPLAY. DELETING IS PERFORMING NOW.
4. WHEN THE USB ICON STOPS FLASHING, IT MEANS THAT ALL TRACK COPYING IS COMPLETED.

REMARK

ALL THE FILES INSIDE THE USB DRIVE WILL BE DELETED COMPLETELY AFTER CONFIRMING TO

“DEL” BUTTON.

COMPACT DISC (CD) PLAYBACK & ENCODING

1. PRESS

BUTTON TO SELECT “CD” ON DISPLAY.

2. PRESS

OPEN / CLOSE

BUTTON

, CD DOOR WILL BE OPENED, PUT THE CD IN THE TRAY AND PRESS

OPEN

/ CLOSE

BUTTON

AGAIN, CD DOOR WILL BE CLOSED.

3.THE SYSTEM WILL START READING THE CD:



PLAY / PAUSE BUTTON

PRESS

THE

PLAY/PAUSE

BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO CONTINUE.



STOP BUTTON

PRESS

THE

STOP

BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE TOTAL

NUMBER OF TRACKS. AND THEN USER CAN TURN

SKIP UP

/ SKIP DOWN

KNOB TO SELECT

TRACKS.



SKIP UP

/ SKIP DOWN

BUTTON

DURING CD PLAYBACK, TURN

SKIP UP

KNOB DOWNWARDS ONCE TO PLAY THE NEXT

FILE. TURN AND HOLD

SKIP UP

BUTTON DOWNWARDS CONTINUOUSLY TO SPEED UP

SELECTING FORWARD

DURING CD PLAYBACK, TURN

SKIP

DOWN

KNOB UPWARDS ONCE TO PLAY THE

PREVIOUS FILE. TURN

AND HOLD

SKIP

DOWN

KNOB UPWARDS CONTINUOUSLY TO

SPEED UP SELECTING BACKWARD.



FOLDER SEARCHING

TURN

ALBUM DOWN

& UP

KNOB

LEFT OR RIGHT TO SEARCH FOLDER BACKWARD OR FORWARD.



REPEAT ONE / REPEAT ALBUM / REPEAT ALL / RANDOM / INTRO PLAYBACK FUNCTION

DURING AUDIO PLAYBACK, PRESS

MODE

BUTTON TO SELECT

REPEAT ONE / REPEAT ALBUM /

REPEAT ALL / RANDOM / INTRO

MUSIC PLAYBACK FROM USB DEVICE

TRACKS PROGRAMMING

UP TO 99 MP3 TRACKS & 20 CD AUDIO FORMAT TRACK CAN BE PROGRAMMED AND PLAYED IN ANY ORDER.
BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:

1. SET AT “USB” MODE, THEN PRESS

STOP

BUTTON.

2. PRESS

MODE

BUTTON, “MEM” WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE

PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.

3. SELECT A DESIRED FOLDER (FOR MP3/WMA DISC ONLY) BY PRESSING

SKIP UP

SKIP DOWN

BUTTON

, THEN PRESS

MODE

BUTTON TO CONFIRM.

4. THEN SELECT A DESIRED TRACK BY PRESSING

SKIP UP

SKIP DOWN

BUTTON

, THEN

PRESS

MODE

BUTTON TO CONFIRM.

5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS “

PLAY/PAUSE

”

BUTTON

TO PLAY THE TRACKS IN ASSIGNED ORDER.

7. PRESS

STOP

BUTTON

TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS

STOP

BUTTON

AGAIN TO

CANCEL PROGRAMMING.

COPYING OF CD

THE SYSTEM ALLOWS YOU TO COPY THE TRACK FROM CD TO USB BY 1 TRACK, 1 FOLDER OR ALL FILES.

I) COPY 1 TRACK

1.INSERT THE USB STORAGE MEDIA, PRESS

CD BUTTON

TO “CD” MODE.

2.PRESS

REC

BUTTON DURING THE PLAYBACK OF THE COPYING TRACK FROM CD, THEN “ONE” WILL BE

FLASHING ON THE DISPLAY. PRESS

REC

BUTTON AGAIN TO CONFIRM.

3.THE USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW.
4.AFTER COMPLETING OF COPY, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
5.DISPLAY WILL SHOW “END” AND BACK TO CD MODE.

II) COPY 1 FOLDER (FOR MP3/WMA DISC ONLY)

1.INSERT THE USB STORAGE MEDIA, SET IN CD & STOP MODE AFTER UNIT READING.
2. TURN

ALBUM DOWN

ALBUM UP

BUTTON KNOB

TO SEARCH FOLDER FOR COPYING.

3. PRESS

REC

BUTTON, THEN “ONE” WILL BE FLASHING ON THE DISPLAY. TURN

SKIP UP

SKIP DOWN

BUTTON

TO SELECT “DIR” ON THE DISPLAY. PRESS

REC

BUTTON AGAIN TO CONFIRM.

4. USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW.
5. WHEN THE USB ICON STOPS FLASHING, IT MEANS THAT THE FOLDER COPYING IS COMPLETED.

III) COPY ALL TRACK

1.INSERT THE USB STORAGE MEDIA, PRESS

BUTTON

TO “CD” MODE.

2. PRESS

REC

BUTTON, THEN “ONE” WLL BE FLASHING ON THE DISPLAY. PRESS

SKIP UP

SKIP DOWN

KNOB TO SELECT “ALL” ON THE DISPLAY. PRESS

REC

BUTTON AGAIN TO CONFIRM.

4. USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW.
5. WHEN THE USB ICON STOPS FLASHING, IT MEANS THAT ALL TRACK COPYING IS COMPLETED.

SPLIT TRACK FUNCTION FOR USB RECORDING FOR TURNTABLE/AUX IN

1) MANUAL SPLIT OPERATION PROCEDURE:

DURING USB RECORDING, THE USB ICON WILL FLASH ON

THE DISPLAY. IF A NEW TRACK IS REQUIRED, PRESS

MODE

BUTTON ON THE UNIT OR REMOTE CONTROL,

DISPLAY WILL SHOW “TS”, THEN THE UNIT WILL STOP RECORDING MOMENTARILY AND RESUME AGAIN. A
NEW FILE WILL HAVE BEEN CREATED ON THE USB DEVICE REPRESNTING A NEW TRACK.

2) AUTO SPLIT OPERATION PROCEDURE:

- BEFORE USB RECORDING, SELECT AUDIO SOURCE, THEN PRESS

MODE

BUTTON ON THE UNIT OR

REMOTE CONTROL, DISPLAY WILL SHOW “T-ON”, WHICH MEANS THE AUTO SPLIT FUNCTION HAS
ACTIVATED. THEN START USB RECORDING, THE UNIT CAN AUTOMATICALLY DETECT THE SILENT PART
BETWEEN EACH TRACK, AND CREATE A NEW FILE TO MOVE ON TO START RECORDING THE NEXT TRACK.
-

IF NOT REQUIRED: PRESS

MODE

BUTTON ON THE UNIT OR REMOTE CONTROL BEFORE USB

RECORDING, DISPLAY WILL SHOW “T-OF”, WHICH MEANS AUTO SPLIT HAS BEEN DEACTIVATED.
-

PLEASE NOTE FOR AUTO SPLIT: SEVERAL SECONDS OF THE BEGINNING OF THE NEXT TRACK MAY

NOT BE RECORDED, AS THE UNIT MAY TAKE A FEW SECONDS TO CREATE A NEW FILE ON THE USB; AND IT
CAN ADDITIONALLY BE THE CASE THAT SOME MUSIC PRODUCERS INTENTIONALLY ADD SILENT SECTIONS
WITHIN ONE TRACK. AS A RESULT, THIS WILL VERY LIKELY MAKE THE UNIT CONSIDER THIS SILENT PART
THE BREAK BETWEEN TRACKS AND CREATE A NEW TRACK ON THE RECORDING.
-

NOTE FOR AUTO SPLIT: DURING USB RECORDING FROM TURNTABLE, WHEN THE UNIT HAS

DETECTED ANY PARTICULAR SILENT PART, THE TURNTABLE WILL STOP MOMENTARILY. THE TURNTABLE
WILL RESUME OPERATION ONCE THE USB DEVICE HAS BEGUN CREATING A NEW FILE TO BE RECORDED.

BLUETOOTOOTH CONNECTION

PRESS AND HOLD

CD/USB

BUTTON TILL LCD SHOWS “BT”, THEN THE UNIT IS READY FOR

CONNECTION WITH YOUR BLUETOOH DEVICE (SUCH AS MOBILE PHONE).

SWITCH ON THE BLUETOOTH FUNCTION OF YOUR BLUETOOH DEVICE, AND SELECT

“TCP9560” BLUETOOTH EQUIPMENT FOR CONNECTION.

AFTER YOUR BLUETOOH DEVICE IS CONNECTED WITH THE UNIT VIA BLUETOOTH, START

TO PLAYBACK YOUR DEVICE.

THIS UNIT HAS NFC FUNCTION WHICH CAN ALLOW YOUR BLUETOOH DEVICE (SUCH AS

MOBILE PHONE) CONNECTING WITH THE UNIT AUTOMATICALLY.

SWITCH ON THE BLUETOOTH AND NFC FUNCTION OF YOUR DEVICE, THEN PUT IT NEAR

THE LOGO WITHIN 5MM ON THE FRONT PANEL. YOUR DEVICE CAN

AUTOMATICALLY SEACH AND CONNECT WITH THE UNIT.

TO DISCONNECT WITH THE UNIT, PUT YOUR DEVICE NEAR THE “BT/N” LOGO WITHIN 5MM

ON THE FRONT PANEL AGAIN.

X-BASS

PRESS

X-BASS

BUTTON, LCD SHOWS “BASS ON”, BASS LEVEL WILL BE ENHANCED DURING

MUSIC PLAYBACK. PRESS

X-BASS

BUTTON AGAIN, LCD SHOWS “BASS OFF”, BASS BACK TO

NORMAL LEVEL.

ID3 DISPLAYX-BASS

DURING MP3 MUSIC PLAYBACK, PRESS

ID3 button

ON TH REMOTE CONTROL, IT CAN SWITCH

ON OR OFF ID3 DISPLAY. IF ID3 DISPLAY IS ON, IT CAN SHOW THE MP3 DETAILS INCLUDING TILE

NAME, ARTIST NAME AND ALBUM NAME DURING MP3 PLYBACK.

EARPHONE JACK & LINE OUT SOCKET

THIS SYSTEM CAN BE CONNECTED WITH HEADPHONE OR EXTERNAL AMPLIFIER /

SPEAKER BY 3.5MM

EARPHONE JACK

THIS SYSTEM CAN BE CONNECTED WITH EXTERNAL DEVICE (EG. AMPLIFIER AND

SPEAKER) BY

LINE-OUT SOCKET

AT REAR CABINET.

POWER SAVING FEATURE:

To save energy, if there is no audio signal from CD / Turntable / AUX IN / USB / for a period of over 10 minutes, then
the unit will automatically switch to Standby Mode.

REMOTE CONTROL

BATTERY INSTALLATION

THE INFRA-RED TRANSMITTER REQUIRES 1 PC CR2025 LITHUM BATTERY FOR OPERATION

BUTTON DESCRIPTION

1 STANDBY:

TRIGGER BETWEEN STANDBY MODE AND OPERATION MODE.

2 PRESET/ALBUM

DN:

PERFORM SAME FUNCTION AS “

ALBUM DOWN / PRESET DOWN

”

KNOB ON THE UNIT.

PRESET/ALBUM UP:

PERFORM SAME FUNCTION AS “

ALBUM UP / PRESET UP

” KNOB

ON THE UNIT.

TIMER / SLEEP:

PERFORM SAME FUNCTION AS “

SLEEP / TIMER

” BUTTON ON THE UNIT.

MUTE

: TO MUTE AUDIO PLAYBACK.

OP/CL & SNOOZE

: OPEN AND CLOSE THE CD DOOR; SNOOZE FUNCTION FOR ALARM.

7 REC/DEL:

PERFORM SAME FUNCTION AS “

REC/DEL

” BUTTON ON THE UNIT.

8 FM

ST./ID3

: SELECT BETWEEN FM STEREO AND MONO RADIO; SWITCH ON OR OFF

THE ID3 DISPLAY.

9 FUNCT

: SELECT FUNCTION BETWEEN CD/USB/PHONO/AUX/TUNER (TO ACTIVIATE

BLUETOOTH FUNCTION, PRESS AND HOLD

FUNCT

BUTTON ON THE REMOTE CONTROL

TILL DISPLAY SHOWS “BT”)

MODE/CLOCK

: PERFORM SAME FUNCTION AS “

MODE/CLK

” BUTTON ON THE UNIT.

(PLAY/PAUSE):

PERFORM SAME FUNCTION AS “

PLAY/PAUSE

” BUTTON ON

THE UNIT.

(STOP)/BAND:

PERFORM SAME FUNCTION AS “

STOP / BAND

” BUTTON ON THE

UNIT.

(SKIP DOWN ):

PERFORM SAME FUNCTION AS “

SKIP DOWN

” BUTTON ON THE

UNIT. BESIDES, IT CAN BE USED FOR RADIO FREQUENCY SEARCHING DURING TUNER
MODE.

(SKIP UP ):

PERFORM SAME FUNCTION AS “

SKIP UP

” BUTTON ON THE UNIT.

BESIDES, IT CAN BE USED FOR RADIO FREQUENCY SEARCHING DURING TUNER
MODE.

VOLUME +/- :

CONTROL VOLUME LEVEL.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE: Any changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

Ask a Question ?