Full Text Searchable PDF User Manual
Model Name: BT3034
©2002 by TECOM CO,. LTD. All rights reserved.
Printed in Taiwan
BLUETOOTH is a trademark owned by Bluetooth SIG., U.S.A. and licensed to TECOM Co., Ltd.
All Brand names and trademarks are the property of their respective owners
The BT3034 Bluetooth
USB Dongle is compliant with Bluetooth standard to assist you to
enjoy the wireless data connectivity experience among different Bluetooth enabled devices
such as desktop & notebook PC, printer, or PDA. The product provides the following
Compliant with Bluetooth Specification V.1.1
USB bus-powered; an external power supply is not required
Supports device drivers for: Microsoft Windows 98SE, Microsoft Windows ME,
Microsoft Windows 2000, Windows XP
Supports 20 dBm (Class 1) Output Power; operating distance up to 100 meters
Supports many user-friendly application profiles for LAN access, files transfer,
dial-up networking, and data synchronization between devices etc.
Supports data rates up to 723 Kbps
Product Quick Installation Guide
Check Product Contents
Insert Software Installation CD to install software
Plug in BT3034 to your computers USB port to install driver
Configuring the application parameters
Enjoy the Bluetooth connectivity
1 Quick Installation Guide
1 Bluetooth USB Dongle
1 CD-ROM for Installation Software & Documentation
1 USB extension cable
To run the software properly, please make sure your Desktop PC or Notebook PC meets the
Hardware: Pentium Class PC, CPU speed 200 MHz or above
RAM: 128MB or above
USB port, supports USB 1.1 standard
Operating System: Windows 98SE, or Windows Me, or Windows 2000, or Windows
Software Setup & Driver Installation
To install the
Bluetooth Software for Windows, follow the instructions described below:
When installing under Windows XP, the installation process might be a slightly
different in from installing under Windows 98SE, ME, and 2000.
Before software installation, do not insert Bluetooth USB Dongle into the USB port.
the Software Installation CD-Rom into the CD-Rom drive.
A Software Installation Wizard window appears, click on
to begin the process.
“ I accept the terms in the license agreement
to accept the license
agreement; click on
6. Specify the location of the driver & software to be installed; click on
8. Confirm the completion of installation; click
and then start the system.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
1. TO COM PLY WITH THE FCC RF EXPOSURE COM PLIANCE REQUIREM ENTS, A
SEPARATION DISTANCE OF AT LEAST 20CM M UST BE M AINTAINED BETWEEN
THE ANTENNA OF THIS DEVICE AND ALL PERSONS. NO CHANGE TO THE
ANTENNA OR THE DEVICE IS PERM ITTED. ANY CHANGE TO THE ANTENNA OR
THE DEVICE COULD RESULT IN THE DEVICE EXCEEDING THE RF EXPOSURE
REQUIREM ENTS AND VOID USER’S AUTHORITY TO OPERATE THIS DEVICE.
2. THE CHANGES OR M ODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COM PLIANCE COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPM ENT.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna, (2) Increase the
separation between the equipment and receiver, (3) Connect the equipment into an outlet on a\circuit different from that to
which the receiver is connected, (4) Consult the dealer or an experienced radio/TV technician for help.
Department of Communications-Canada
Canadian Compliance Statement
This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment Regulations.
Cet appareil numerique de la classe B respect les exigencies du Reglement sur le material broilleur du Canada.
This device complies with Class B Limits of Industry of Canada. Operation is subject to the following two conditions: 1)
this device may not cause harmful interference, and 2) this device must accept any interference received, including
interference that may cause undesired operation.
This device is certified to the requirements of RSS-139-1 and RSS-210 for 2.4 GHz spread spectrum devices. The use of
this device in a system operating ether partially or completely outdoors may require the user to obtain a license for the
system according to the Canadian regulations. For further information, contact local Industry Canada office.
For the following equipment:
Product Name: Bluetooth USB Dongle
M odel Name: BT3034
Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws
of the M ember States relating to 1999/5/EC R&TTE Directive. For the evaluation regarding the Directives, the following
standards were applied: ETSI 300
y ( )
of purchase, completed and returned the Registration Card which accompanied the products
when shipped, (2) return the failed product to TECOM designated repair facility with
shipping charge prepaid, and (3) provide TECOM with proof of the original date of purchase.
Repaired or replacement products will be returned to you with shipping charges prepaid.
Replacement products may be refurbished or contain refurbished materials. If TECOM by its
sole determination, is unable to repair or replace the defective product, it will refund the
depreciated purchase price of the product.
This warranty does not apply if, in the judgment of TECOM, the product fails due to damage
from shipment, handling, storage, accident, abuse or misuse, or if it has been used or
maintained in a manner not conforming to product manual instructions, has been modified in
any way, or has had any serial number removed or defected. Repair by anyone other than
TECOM or an approved agent will void this warranty. The maximum liability of TECOM
under this warranty is limited to the purchase rice of the product covered by the warranty.
Prior to returning any defective product, the end customer or the reseller from whom the end
customer original purchased the product must obtain a Return Materials Authorization
(RMA) number from TECOM. All defective products should be returned to TECOM with
shipping charges prepaid.
Except as specifically provided in this statement or as required by law, the warranties
and remedies stated above are exclusive and in lieu of all others, oral or written,
express or implied. Any and all other warranties, including implied warranties of
merchantability, fitness for a particular purpose and non-infringement of third party
rights are expressly excluded. TECOM shall not under any circumstances be liable to
any person for any special, incidental, indirect or consequential damages, including
without or revenues or costs of replacement goods, even if TECOM is informed in
advance of the possibility of such damages.
Company Name: __________________________________________________
Address (1): ______________________________________________________
Address (2): ______________________________________________________
E-mail : __________________________________________________________
Purchase Date: ____________________________________________________
Where did you purchased the product?
____ Mail order
____ Retail Store
Reseller Name: ___________________________________________________
Reseller Address __________________________________________________
What PC will this TECOM product be used?
____ Desktop PC
____ Notebook PC
Where will the product primarily be used?
____ Personal Use
** PLEASE ATTACH A PHOTOCOPY OF RECIPET OF ORIGINAL PURCHASE! **
Specify the location of the driver (advanced)
”; then click on
Select the location of device driver, please specify “C:\Program Files
\Widcomm\Bluetooth Software\bin\”, click on
12. Confirm the device driver found; click on
14. A “My Bluetooth Places” icon appears on the desktop.
More detailed explanations and the operation of each Bluetooth
be found in User’s Manual in the CD-ROM.
My Bluetooth Places
icon appears on the
items, Security and Configuration , of Setup option.
Click on “Configuration”, the “General” Section of Bluetooth Configuration allows
you to customize the device’s user name, type, and security type.
The “Accessibility” Section allows you to specify which individual devices are allow
to access to the user’s device.
More detailed explanations and the operation of each Bluetooth services can be found
in User’s Manual in the CD-ROM.
To use the “My Bluetooth Places” program, follow the instructions described below:
“ My Bluetooth Places”
on PC desktop, the “My Bluetooth Places” window
appears, three icons, “
” , “
Entire Bluetooth Neighborhood
” & “
” appears inside the window.
from the “Bluetooth Neighborhood” window to see which
application services is available to the other devices. The icon with “
” or without
” indicates the Bluetooth service availability of this device.
Entire Bluetooth Neighborhood
from the “My Bluetooth Places” window
to search for available devices. Once Bluetooth devices are detected, icons with
device names will be displayed on the screen; click on each icon to see what services
are available to you. Click on each available service to begin with the service.
Click on any available device, for example, a device name “BT98” from the
“My Bluetooth Places” window to see which services are available to you.
Double click on each icon to begin with different services
Overseas Sales Offices
Customer and Technical Supporting Centers
Europe & Asia
No.19-8, 6F San-Chung Road, Nankang District, Taipei, Taiwan
E#202 NO.20 Guandondian St. Chaoyang, District, Beijing,
Tel: +86 10 65032280~1
Fax: +86 10 6503 2258;
4F, Marushin Bldg. 1-6-2 Hamamatsucho, Minato-ku, Tokyo, Japan 105-0013
Tel: +81 33435 7817
Fax: +81 33578 8381
TECOM (USA) Group, Inc.
Add: 3 Corporate Park, Suite 168, Irvine, Ca. 92606 USA
Tel: 1-949-474-1535; Fax: 1-949-474-1539
21902 64th Ave. West #1, Mountlake, Terrace, WA 98043.
Tel: (206) 229-9979
E-mail : ytwang@ tecom.com.tw
23 R&D Road 2, Science-Based Industrial Park, Hsin-Chu, Taiwan R.O.C.