Full Text Searchable PDF User Manual
��������������������������������������
Smart
Latch
TIME+TEMP
USER GUIDE
TECHTRAIL INC.
web:
www.techtrail.com
email: contacts@techtrail.com
© 2006 TechTrail, Inc. All Rights Reserved.
�
�
�
�
�
�
The
SMARTLATCH TIME+TEMP
uses a common
AG10 (1.5 VDC)*
micro alkaline battery.
TO REPLACE THE BATTERY:
1.
Remove the battery door using a coin.
2.
Using a small jeweller’s screwdriver, remove the battery cover.
3.
Place a fresh battery in the battery compartment with the
positive (+) side facing up.
4.
Replace the battery cover and battery door.
*BATTERY MANUFACTURER SPECS:
Generic:
AG10 (1.5 VDC)
Citizen:
BLR54
Duracell:
LR54
Eveready:
189
Maxell:
LR1130
Ray-O-Vac:
189-1
Seiko:
89A
Vartra:
V10GA
CHANGING THE BATTERY
FO
LD
85 CM
COVER
R
O
LL
-F
O
LD
T
H
IS
D
IR
EC
TI
O
N
SLTT_InstructTT.indd 1-2
2/24/06 10:12:04 AM
SETTING THE TIME AND DATE
1. PRESS & HOLD
the
S2
key.
2.
Month digit will blink.
ADJUST MONTH
by
PRESSING
the
S1
key.
PRESS &
HOLD
for fast scrolling.
3. ADVANCE
to set Day by
PRESSING
the
S2
key.
SET DAY
by
PRESSING
the
S1
key.
NOTE:
The calendar is programmed for 28 days in February. Date will need to be
adjusted in leap years.
4.
PRESS
the
S2
key.
SET HOUR
by
PRESSING
the
S1
key.
NOTE:
The SmartLatch Time+Temp is capable of displaying time in 12 or 24 hour
formats. When setting hours, time will display 1 through 12 AM & PM, followed
by 0 through 24.
5.
PRESS
the
S2
key.
SET MINUTES
by
PRESSING
the
S1
key.
6. PRESS S2
to exit the Setting Sequence.
OPERATING THE SMARTLATCH TIME+TEMP
1. PRESS S1
to scroll through display modes.
2.
In Temperature Mode,
PRESS S3
to
CHANGE TEMPERATURE
DISPLAY UNITS
from °F to °C.
��
��
��
S1
Changes display mode
Adjusts variable in Setting Sequence
S2
Activates Setting Sequence
S3
Toggles temperature units between
°F and °C
��
��
��
KEYS AND THEIR FUNCTIONS
SLTT_InstructTT.indd 3-4
2/24/06 10:12:05 AM