Full Text Searchable PDF User Manual
1
3G GPS Vehicle Tracker
GPS/WCDMA/GSM/GPRS
G03 User Manual
Version 1.1
Welcome purchasing the product, please read user manual carefully
2
Contents
1.
Summary ................................................................................................. 3
2.
Main functions......................................................................................... 3
3.
Specs. ...................................................................................................... 3
4.
Installation instructions ............................................................................ 4
5.
Wires connection ..................................................................................... 5
6.
Function setting ....................................................................................... 6
6.1 Initialization............................................................................................. 6
6.2 Change Password ..................................................................................... 7
6.3Authorization ............................................................................................ 7
6.4
Set Center Number Receive Alarm......................................................... 7
6.5
Single Tracking ..................................................................................... 7
6.6
Set Time Interval Upload to Server ........................................................ 8
6.7
Disable fuel or elecreicity ...................................................................... 8
6.8
Resume the Oil and Power System ......................................................... 8
6.9
Set All Alarm Command ....................................................................... 8
6.10
Time Setting....................................................................................... 9
6.11
How to track on GPS System .............................................................. 9
6.11.1 Set APN .............................................................................................. 9
6.11.2 Set IP(Domain) and Port ...................................................................... 9
6.12
GPS Tracking System ....................................................................... 10
7
. Faults & the Solutions .......................................................................... 10
3
1.
Summary
Working Based on existing WCDMA/GSM/GPRS network and GPS satellites,
this product can locate any remote targets by SMS or GPRS/WCDMA.
NOTE: Please turn on small s witch inside SIM card hole after install SIM card
2.
Main functions
★
WCDMA/GSM Quad-band
★
Real time tracking by SMS/Web/APP
★
Ignition ON status alarm
★
Overspeed alarm/Geo-fence alarm
★
Disable fuel or electricity (optional)
3.
Specs.
Size
96*50.3*18.5 mm
Working voltage
9-36V DC
Band
UMTS/HSPA+
:
850/1900/2100MHz
GSM/GPRS
:
850/900/1800/1900MHz
GPRS
Class12, TCP/ IP
GPS
Ublox-7020
Tracking sensitivity
-165dBm
Time To First Fix
Hot start: ≤1 sec(open sky)
Warm start: < 15 sec
Cold start: < 38 sec(open sky)
Accurancy
5M
Storage Temp.
-40°C to +85°C
Operation Temp.
-20°C to +45°C
Humidity
15%--95%
4
4.
Installation instructions
4.1 Preparation:
need to insert a GSM SIM card in device.
Please insert SIM card before turning the device power switch to on
; The
SIM card need open the GPRS function;Please make sure SIM card with full
balance.
●
Insert SIM card
→
Switch button to “ON” place
4.2 Installation
If the windscreen glued by metal thermal insulation layer or heating layer, it will
reduce the GPS receive signal and lead to GPS work disorder, then please
change the installation place.
5
4.3 Device light description
Light
Signal
Normal status
Red light
Power
Stable light on
Yellow light
GSM signal
Stable light on
Blue
GPS signal
Stable light on
Note: the three lights must be stable lighting represents device can work
normally. Device will turn into sleep mode with lights off after around 5
minutes, it will wake up if make a call to device number or detect any
vibration.
5.
Wires connection
1) Red wire connects to vehicle power anode
2) Black wire connects to vehicle power cathode
3) White wire connects to oil or circuit control wires
4) Brown wire connects to ACC ignition wire
6
6.
Function setting
6.1 Initialization
Send SMS “
begin123456
” to the unit, it will reply “BEGIN,CONFIG OK ” and
initialize to default factory settings.
(
default password: 123456
)
The “+” in the command, please don’t type “+”, space means press the
space keyboard on your cell phone.
7
6.2 Change Password
6.2.1 Send SMS “
password+old password+space+new password
” to change
password.
For example: send SMS “password123456 888888” to the unit,
“PASSWORD,CONFIG OK” will reply to your cell phone from the device
tracker. Make sure the new password is in 6 digits.
6.3Authorization
There are 5 numbers to be allowed to authorize in the tracker at most.
6.3.1 Authorization: Send SMS“
admin+password+space+cell phone number
”
to set up authorized number, the unit will reply” ADMIN,CONFIG OK”.
6.3.2 Delete authorization: Send SMS“
noadmin+password+space+authorized
number
” to delete authorized number.
6.4
Set Center Number Receive Alarm
There is 1 number to be allowed to set as center number.
All alarms will be received by center number.
6.4.1 Setup: send command “
centernum+password+space+number
” to
tracker, it will reply “centernum,CONFIG OK”.
6.4.2Cancel: Send “
nocenternum+password
” to tracker, it will reply
“CANCEL CENTERNUMBER OK”.
6.5
Single Tracking
Make a missed call to device number or Send SMS “
smslink+password
” to
device number, it will reply a real time Google link.
8
6.6
Set Time Interval Upload to Server
Send SMS command “
ITV+password+space+upload time interval
”
to the
tracker device.
For example: send SMS “ITV123456 10” it will report data to server at 10s time
interval.
6.7
Disable fuel or elecreicity
Send SMS command “
DY+password+space+1
” to the tracker, it will reply
“DY CONFIG OK”, and stop your car fuel pump or electricity as well.
6.8
Resume the Oil and Power System
Send SMS command “
TY+password+space+1
” to the unit, It will reply “TY
CONFIG OK” and resume your car fuel pump or electricity as well.
6.9
Set All Alarm Command
Note: All Alarms only will be sent to Center Number
Function
SMS Command
Remark
Set overspeed alarm
speed123456(space)080
SPEED,OK
Cancel overspeed alarm
speed123456(space)0
Set ignition on alarm
ACC123456(space)1
Cancel ignition on alarm
ACC123456(space)0
Default mode
Close all alarm
KC123456(space)0
Set SMS alarm
KC123456(space)1
Default mode
Set calling alarm
KC123456(space)2
9
6.10
Time Setting
Send SMS “
timezone123456+space+(timezone*60)
” to the tracker.
For example: Send SMS “timezone123456 330”, +5.5 is India time zone, so it is
5.5*60=330; If time zone is -6, send SMS “time zone123456 -360”.
6.11
How to track on GPS System
User must send SMS via cell phone to set up APN, IP and port before starting
tracking by GPRS on tracking system.
6.11.1 Set APN
1) APN standards for Access Point Name and differs from country to country.
For more information about your local APN, please inquire with your local
GPRS network operator.
2) Send SMS “
APN+password+space+local APN+space+APN
name+space+APN password
”, the tracker will return the message “APN OK”.
3) E.g. Send SMS “APN123456 tim.br tim tim”, it will reply SMS “APN
CONFIG OK”
6.11.2 Set IP(Domain) and Port
Send SMS: “
adminip+password+space+IP Address+space+port number
”, it
will reply “ADMINIP,CONFIG OK”.
E.g. Send SMS: “adminip123456 121.201.109.14 6969” to the tracker.
10
6.12
GPS Tracking System
www.secumore1818.com
Default IMEI as user name, password 123456.
(Android APP) (IOS APP)
7
. Faults & the Solutions
Faults
Solution
yellow light flashing
Its failed to read SIM card, need re-install SIM card; after inserting
SIM card, then turn on power
blue light flashing
GPS not located, check if working outside not in room; install
place has no metal cover
Three light turn off
Lights will enter sleep after stable lighting on 3 minutes and not
effect GPS working, when calling device again will wake up
lights
Device has no reply
Check if already existing admin number; SIM card has balance
11
Guarantee Card
User Name
Phone
Address
Model No
IMEI No
Purchase
Date
Invoice No
Seller Name
Address
Seller Contact
1.Within warranty period, if any damage caused by the product's own quality, user
can bring the purchasing invoice and warranty card to supplier to arrange repair.
2.Those machines that has refitted or added other functions by user own will not
be accepted to repair.
3.Attempt to disassemble the product can damage it and void your warranty.
4.This card and the purchasing invoice are both considered as a receipt for repair,
please reserve it carefully.