PDF User Manual

  1. Home
  2. Manuals
  3. RoamAlert ECO User Manual

RoamAlert ECO User Manual

Made by: RoamAlert
Type: User Guide
Category: Keypad
Pages: 2
Size: 0.39 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

ECO User Guide

©  2010 Stanley Security Solutions, Inc. All Rights Reserved.

  October 2010. 980-000009-000 Rev 04

Tel: USA: 800-824-2996    Canada: 866-559-6275    Int’l: +1 (613) 592-6997    Web: www.stanleyhealthcare.com

Stanley Security Solutions    Stanley Healthcare Solutions Division     1550 N. 20th Circle, Lincoln, NE 68503

The Access Keypad

The  Keypad  provides  four  separate 
functions:

•  Local audible and visual alarms
•  Bypass function to escort residents 

through the protected exit

•  Alarm reset when the Controller 

is in continuous alarm mode or 
resets the bypass sequence

•  Controller  status  indication  via 

the LED indicators

The Controller may be bypassed or reset 
at an exit point by entering a 3- to 7-digit 
code at the keypad.

Status Indicator Condition

Cause

Action

Power

OFF

Power is off

Turn Power ON

Solid Yellow

Power ON, Ready Mode

None; system ready

Bypass

Flashing Green/Red + Beeping tone Bypass Mode

Escort resident immediately

Alarm

Flashing Red + Beeping tone

Alarm Mode

Investigate; reset alarm

Escorting Residents (Bypass)

1. 

Bring the resident to the exit, ensuring that he or she is not in the detection zone.

2. 

Enter the <BYPASS CODE> on the keypad.

3. 

Press <#> on the keypad.

4. 

Escort the resident through the exit.

Note: There are three automatic timers enabled by the system when the bypass function is activated:

• 

Bypass Timeout:

 You have 10 seconds to enter the detection zone after the bypass code is entered. If no 

tag enters the zone within the 10-second period, the bypass is terminated.

• 

Transport:

 Once the tag enters the detection zone, you have 90 seconds to transport the resident through 

the zone before the alarm is activated.

• 

Rearm:

 After the tag is through the zone or the door closes, the system automatically resets itself in 8 seconds.

Reset an Alarm

•  Enter the <Reset Code> on the keypad and press <#>.

Clear or Correct an Entry

•  To clear or correct an entry, press <*> on the keypad.

Power 

(Yellow LED)

Bypass 

(Green LED)
Alarm 

(Red LED)

Clear Function

Enter Function

 


background image

 

2

RoamAlert ECO User Guide

Optional ANN6L Six-Zone Annunciator (AGEAN01-060, North America only)

Status 

Indicator

Audible 

Tone

Door 

Status

Cause

Action

Standby

None

Closed

No tag in zone

None required

Flashing 

YELLOW

Warning 

Tone

Closed

Tag in zone

1. Investigate cause

2. Ensure resident safety

3. Reset panel

Flashing 

RED

Alarm 

Tone

Open

Tag in or passing 

through zone

1. Investigate cause

2. Ensure resident safety

3. Reset panel

Warranty

Stanley Healthcare Solutions’ RoamAlert ECO hardware is warranted against defects in materials and workmanship 
and shall perform in accordance with published specifications for 1 year from the date of installation.
Stanley Healthcare Solutions’ warranty is limited solely to the repair or replacement of the defective part or product. 
Stanley Healthcare Solutions reserves the right to change product specifications without notice.

Copyright Information

All content herein is the property of Stanley Black & Decker, Inc., its Affiliates, or their content suppliers and is protected 
by United States and international copyright laws. The compilation of all content is likewise the exclusive property 
of Stanley Black & Decker, Inc. (or the Affiliate identified in any copyright notice) and is protected by United States 
and international copyright laws.
The trademarks, service marks and logos (the ‘Trademarks’) used and displayed in this publication are registered and 
unregistered Trademarks of Stanley Black & Decker, Inc., its Affiliates and others. Nothing herein should be construed 
as granting, by implication, estoppel or otherwise, any license or right to use any Trademark displayed herein without 
the prior consent of the Trademark owner. Stanley and the Stanley design are two of the trademarks owned by Stanley 
Black & Decker, Inc. and/or its Affiliates (“Stanley Black & Decker Trademarks”). Stanley Black & Decker Trademarks 
may not be used in connection with any product or service that is not manufactured by or under license from Stanley 
Black & Decker, Inc. or its appropriate Affiliate.

Zone Location

Up to 6 zones can be displayed on 

the annunciator. These zones are 

usually labelled during installation.

RESET Button

Silences an alarm, and resets the 

system if the Reset Output is con-

nected to the Door Controllers. All 

alarms in the system are reset.

(The system can only be reset if no 

tags are in the detection zone).

Status Indicator

Adjacent to each identified zone 

on the panel is a Status Indicator 

that flashes either red or yellow to 

provide a visual alarm.

Audible Alarm

Two distinct audible alarm tones are 

generated when a tag enters the 

detection zone ; one when the door 

is open and the other when the door  

is closed.

SILENCE Button

Silences the audible alarm, even 

with a tag in the zone. The Status 

Indicator continues to flash until the 

alarm is investigated.

• 

To silence the audible alarm, press 

<SILENCE>.  Note:  The  audible 

alarm is silenced, but the RED indi-

cator continues to flash.

• 

To  reset  the  audible  alarm,  press 

<RESET>. Note: The RESET button 

only works if there are no tags in the 

detection zone.