PDF User Manual

  1. Home
  2. Manuals
  3. ParaBody GS2 User Manual

ParaBody GS2 User Manual

GS1 GS1 GS2

Made by: ParaBody
Type: User Guide
Category: Home Gym
Pages: 13
Size: 0.81 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

1

 LEG PRESS ADAPTER KIT

CLASS H
PART # 7358101
REV. A

Revision:  11/01/02

USER’S GUIDE

WARNING:

Read and follow all directions
for each step to insure proper
assembly of this product.

FOR GS1/GS2 GYM SYSTEM

Version: GS1-LP5A-101

 


background image

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT.  TO MINIMIZE RISK FOLLOW THESE RULES

!

1. Before using, read all the warnings and instructions
on the use of this machine.  Use only for intended
exercise.  

DO NOT

 modify the machine.

2. Obtain a medical exam before beginning any
exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use.  

DO NOT

 use it if it

appears damaged.  

DO NOT

 attempt to fix a broken or

jammed machine.  Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.

5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer.  If
unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated
position.  

DO NOT

 use the machine if found in this

condition.  

DO NOT

 attempt to fix.  Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using
machine.  Pay particular attention to the cable ends.

DO NOT

 attempt to fix.  Notify your authorized

ParaBody dealer before use and have repairs made by
an authorized service technician.

8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.

9. Children must not be allowed near this machine.
Supervise teenagers.

.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety  Statement.............2
General Notes..................3
Tools Required................3

NOTE:

  In a continual effort to improve our products, specifications are subject to change

                   2002 Life Fitness, a division of Brunswick Corporation.  All rights reserved.
              ParaBody is a trademark of Brunswick Corporation

             www.parabody.com

2

Parts list..........................4
Assembly Instructions.....4-13
Insert-Registration Card

©

 


background image

IMPORTANT NOTES

Please note:

Tools Required for Assembly

* Thank you for purchasing the ParaBody GS1/ GS2 Leg Press Adapter Kit. Please read these
   instructions thoroughly and keep them for future reference. This product must be assembled
   on a flat, level surface to assure its proper function.

* 9/16” wrench
* Ratchet with 9/16” socket
* Adjustable wrench
* Tape measure

3

NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.

   BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function.  DO NOT
   securely tighten any frame connections until the entire frame has been assembled, unless
   otherwise stated.

Bolt Length Ruler

0

1

2

3

4

5

6

1/2

1/2

1/2

1/2

1/2

1/2

BOLT LENGTH

 


background image

PARTS LIST

4

NOTE:  The LEG PRESS ATTACHMENT (LP5) must be assembled before connecting it to the PARABODY GS1/GS2 GYM

SYSTEMS

PART #

ACU04-1450

ACU13-0140

ACU06-0024

ACU06-0362

ACUDC1250100020B

ACUDB2E03811000B

ACUDA1E03813416NB

QTY

1

1

7

1

9

14

3

PART #

ACUDA1E03823416NB

ACUDA1E03840016NB

ACUDA1E03843416NB

ACU08-0085

ACU08-0076

ACU08-0079

ACU02-0055

DESCRIPTION

3/8 X 2-3/4” BOLT

3/8 X 4” BOLT

3/8 X 4-3/4” BOLT

STEP SPACER 19/32” LG

STEP SPACER 1-19/32” LG

STEP SPACER 1-11/16” LG

CABLE L CLIP

QTY

4

2

5

4

4

2

1

 

DESCRIPTION

FRONT LEG

LEG PRESS CABLE

3-1/2” PULLEY

2” COVER CAP

3/8” WASHER

3/8” LOCKNUT

3/8 X 1-3/4” BOLT

KEY

8

9

10

11

12

13

14

KEY

1

2

3

4

5

6

7

    FIGURE 1

STEP 1:

•    Remove and discard the LEG CABLE by removing the bolts shown in FIGURE 1.

DISCARD

!

CABLE

•    Remove the bolts attaching the FRAME BRACE and CABLE to the BASE as shown in figure 1

 


background image

5

0

1

2

3

4

5

6

1/2

1/2

1/2

1/2

1/2

1/2

•     If  not already installed, slide one 2” COVER CAP (4) over the FRONT LEG (1) as shown in FIGURE 8

    FIGURE 2

STEP 2:

•    

SECURELY  

assemble the FRONT LEG (1) to the GS1/GS2 Gym System using two 3/8 X 4” BOLTS (9), four 3/8” WASHERS

(5), two LOW HEIGHT 3/8” LOCK NUTS (6) as shown in FIGURE 2.

 9  3/8 X 4”

 6

 5

 1

 4

 


background image

    FIGURE 3

STEP 3:

•   Assemble the new LEG PRESS CABLE (2) using the previously removed bolts as shown in FIGURE 3. 

(NOTE: Make sure the

LEG PRESS CABLE is running in the grooves of all pulleys and above the retaining bolts.)

6

 2

 


background image

    FIGURE 4

STEP 4:

7

 1

 6

 3

•   

  SECURELY 

assemble one 3-1/2” PULLEY (3) to the FRONT LEG (1) using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOCK

NUT (6). See FIGURE 4.

 2

7  3/8 X 1-3/4”

0

1

2

3

4

5

6

1/2

1/2

1/2

1/2

1/2

1/2

 


background image

    FIGURE 5

STEP 5:

8

• 

 

SECURELY 

attach the LP5 LEG PRESS to the FRONT LEG (1) using two 3/8” X 2-3/4” BOLTS (8), two 3/8” WASHERS (5),

and two 3/8” LOCK NUTS (6). See FIGURE 5.

 1

 6

 5

 8  3/8 X 2-3/4”

    FIGURE 6

STEP 6:

•  

Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and 

SECURELY 

assemble the 3-1/2” PULLEY (3) to

the BRACKET (from 100 LEG PRESS kit) using one 3/8 X 1-3/4” BOLT (7), one 3/8” WASHER  (5), one CABLE CLIP (14) and
one 3/8” LOCK NUT (6) as shown in FIGURE 6. Make sure the CABLE is in the grooves of all the pulleys.

SEAT FRAME

 6

 5

 2

 3

 7  3/8 X 1-3/4”

14

BRACKET

 


background image

9

0

1

2

3

4

5

6

1/2

1/2

1/2

1/2

1/2

1/2

    FIGURE 8

STEP 8:

•  

Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and 

SECURELY 

assemble the 3-1/2” PULLEY (3) to

the bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOCK NUT (6) as shown in FIGURE 8. Make
sure the CABLE is in the grooves of all the pulleys.

3/8 X 1-3/4”  7

 3

 2

 6

SEAT FRAME

    FIGURE 7

STEP 7:

6

SEAT FRAME

• 

 

SECURELY 

attach the BRACKET (from LP5 LEG PRESS) to the SEAT FRAME using two 3/8” X 4-3/4” BOLTS (10), two 3/8”

WASHERS (5), and two 3/8” LOCK NUTS (6). See FIGURE 7.

BRACKET

 5

10

3/8  LOCK NUT

3/8 X 4-3/4”

 


background image

    FIGURE 9

STEP 9:

•  

Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and 

SECURELY 

assemble the 3-1/2” PULLEY (3) to

the SEAT FRAME using one 3/8 X 4-3/4” BOLT (10), two STEP SPACERS 1-19/32” (12) and one 3/8” LOCK NUT (6) as shown in
FIGURE 9. Make sure the CABLE is in the grooves of all the pulleys.

3/8 X 4-3/4”   10

 3

 2

6

12

MAIN ARM

    FIGURE 10

STEP 10:

•  

Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and 

SECURELY 

assemble the 3-1/2” PULLEY (3)

to the MAIN ARM using one 3/8 X 2-3/4” BOLT (8), two STEP SPACERS 19/32” (11) and one 3/8” LOCK NUT (6) as shown in
FIGURE 10. Make sure the CABLE is in the grooves of all the pulleys.

3/8 X 2-3/4”  8

 3

 2

 6

11

3/8  LOCK NUT

10

 SEAT FRAME

 


background image

    FIGURE 12

STEP 12:

•  

Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and 

SECURELY 

assemble the 3-1/2” PULLEY (3) to

the MAIN ARM using one 3/8 X 2-3/4” BOLT (8), two STEP SPACERS 19/32” (11) and one 3/8” LOCK NUT (6) as shown in FIGURE
12. Make sure the CABLE is in the grooves of all the pulleys.

3/8 X 2-3/4”  8

 3

 2

 6

11

MAIN ARM

    FIGURE 11

STEP 11:

•  

Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and 

SECURELY 

assemble the 3-1/2” PULLEY (3)

to the SEAT FRAME using one 3/8 X 4-3/4” BOLT (10), two STEP SPACERS 1-19/32” (12), and one 3/8” LOCK NUT (6) as shown
in FIGURE 11. Make sure the CABLE is in the grooves of all the pulleys.

3/8 X 4-3/4” 10

 3

 2

6

12

3/8”  LOCK NUT

11

0

1

2

3

4

5

6

1/2

1/2

1/2

1/2

1/2

1/2

 SEAT FRAME

 


background image

    FIGURE 13

STEP 13:

3/8 X 4-3/4” 10

 2

6

13

 SEAT FRAME

12

•   

SECURELY 

assemble the swivel end of the LEG PRESS CABLE (2) to the SEAT FRAME using one 3/8 X 4-3/4” BOLT (10), two STEP

SPACERS 1-11/16” (13) and one 3/8” LOCK NUT (6). 

 (NOTE: SECURELY tighten, then back nut off 1/4 turn)

CABLE ROUTING DIAGRAM

3/8  LOCK NUT

 


background image

    FIGURE 14

STEP 14:

•   Before setting the correct amount of tension in the cables, push the HEAD PLATE down, insert the WEIGHT SELECTOR PIN,
     and perform several repetitions at the leg press station. This will relax the cable system and prevent the HEAD PLATE from
     lifting up.

THIS CONCLUDES THE ASSEMBLY OF THE GS1-LP5A-101 LEG PRESS ADAPTER KIT

13

Thank you for purchasing the Parabody GS1-LP5A-101 Leg Press Adapter Kit. If unsure of proper use of
equipment, call your local Parabody distributor or call the Parabody customer service department at (800)
328-9714.

ADJUST!

ADJUST!