PDF User Manual

  1. Home
  2. Manuals
  3. Oji Mansion iLock X2 User Manual

Oji Mansion iLock X2 User Manual

Made by: Oji
Type: User Manual
Category: Door locks
Pages: 20
Size: 0.33 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

User Manual

 


background image

Thank you for choosing Mansion iLock X2

Please read the instructions before use in order to 

understand the correct operation of the product.

CONTENTS:

1 x Mansion iLock X2
2 x Lock Case
4 x AAA Batteries
1 x Screwdriver

!

!

 


background image

Spindle

Semi-Conductor

Fingerprint

Collector

Password

Keyboard

Inner

Knob

Outer

Knob

Emergency

Power Supply

Interface

Back Cover Of

Inner Knob
Inner Knob Case

Triangle Mark

Fixing Screw Hole

Regulating Screw 

Adjusting Hole

Outer Knob Touch Points

 


background image

L2

Network Key

Screw x 4

Battery Cover

Recovery

Key

L1

Adjusting Hole

(in lock body)

 


background image

1. Lock and Unlock Function

a.

 To Unlock: At the door, enter the correct fingerprint or 

password, then turn the outer knob to open the door lock 

until you hear

 “Welcome home”

 after a successful verifi-

cation. Five seconds later, the outer knob automatically 

recovers to idle state so that the door can't be unlocked.

b.

 On Exit: At the door, enter the correct fingerprint or 

password, then turn the outer knob to double lock the 

door until you hear 

“Bon voyage”

 after a successful 

verification. Five seconds later, the outer knob automati-

cally recovers to idle state so that the door can't be 

unlocked. The Door is successfully locked

2. Tamper Alarm Function

If the outer case of the lock body is removed or opened 

forcibly, the lock cylinder will give off a high-pitched alarm 

sound.

3. Random Password Function

Input random numbers before or after the correct pass-

word to prevent malicious theft.

Part1: 

Functions

 


background image

5. Pseudo Password Function

a. 

When a wrong password is input continuously five 

times, the keypad will be automatically locked for three 

minutes. It will not recognize any password during that 

period, but the correct fingerprint can be entered to 

remove the locked password.

6. Thief-Proof Function

a.

 

Protect Mode: At the door, long press the “#” key for 

two seconds after successful verification until you hear 

“On Protection”.

b.

 When a wrong fingerprint is input continuously five 

times, the keypad will automatically be locked for three 

minutes. It will not recognize any fingerprint during that 

period, but the correct password can be entered to 

remove the locked fingerprint.

b.

Unprotect: At the door, if the fingerprint / password is 

verified successfully, the protection is lifted.

If the door is opened under protection mode, the lock 

cylinder gives off a high-pitched alarm.

4. Touch Function

A touch sensor on the password keyboard and fingerprint 

contact offer a more comfortable user experience.

 


background image

7. Voice Prompt

Voice prompts 

“Welcome home”

 and 

“Bon Voyage”

 can 

be heard every time the door unlocks. These can be 

turned off in the setting menu.

8. Low-Voltage Alarm

When the batteries are running down, it gives off a 

warning prompt “low-voltage, please replace the battery 

in time”.

9. Emergency Power Supply

If the fingerprint or password fails to be recognized due to 

a delayed replacement of batteries, connect the 

Micro-USB interface on the outer knob with a portable 

battery and then open the door normally. After that, 

please replace the batteries in the lock cylinder immedi-

ately

Emergency
Battery Interface

 


background image

1: Remove the Original Lock Cylinder

Part2: 

Installation

Using  the screw driver, unfasten the screws from the 

inside of the door and remove the panel and accessories.

Inner Plate

Outer Panel

Lock Cylinder 

Screw

 


background image

2.

 Unfasten the screws to remove the lock cylinder from 

the side of the door.

Screw

Note:

Insert the key into the lock cylinder and rotate to an 

appropriate angle, then the lock cylinder can be removed.

 


background image

Installing the lock

1. 

Fix on the original panel and install the lock cylinder of 

iLock X2 from inside the door.

OUTSIDE

THE DOOR

INSIDE

THE DOOR

Outer Panel

Inner Panel

Lock

Case

Lock

Case

 


background image

2. 

Fix on the lock cylinder and fasten screws.

INSIDE THE DOOR

Screw

 


background image

3. 

Insert the outer knob into the lock cylinder from the 

outside of the door.

OUTSIDE THE DOOR

INSIDE THE DOOR

Outer Panel

Convex Key

Mounting

Groove

Note:

Align the convex key on the outer knob with the mounting 

groove in the lock cylinder.

 


background image

4. 

Fix on outer knob

a. 

Rotate the triangle mark on the inner knob case to the north.

b. 

Do not move the inner knob case, rotate the outer knob to 

align the battery box with the adjusting hole on the case (as is 

shown in figure)

c.

 Insert a straight screwdriver into two adjusting holes and turn it 

anticlockwise to fix on the outer knob.

Marker Line

Rotate the straight

screwdriver 

anti-clockwise

Note:

Fasten the screw by rotating anticlockwise, while loosen-

ing in the opposite direction.

 


background image

5. Battery Installation

a. 

Open the back cover of the inner knob.

b. 

Use a cross screwdriver to unfasten four screws on the cover 

of the battery box and remove the battery box.

c.

 Put four AAA batteries in the battery box (pay attention to the 

positive and negative electrode), then fasten the cover of the 

battery box.

Cover Of
Inner Knob

Screw x 4

Cover Of
Battery Box 

AAA Batteries x 4

Hardware of Mansion iLock X2 has been installed 

completely. Congratulations!

 


background image

Part3: 

Lock Settings

a. 

Touch the keyboard and press “#” key for three times 

to enter into the setting state.

1. First Login

Any fingerprint or password cannot open the door in the 

factory state, so please follow the following procedures to 

log in for the first time:

b. 

First input the initial password “0123456” and press the 

“#” key for confirmation, you can hear a voice prompt 

“please set up the first administrator password”

; then 

input a password consisting of six to twelve digits, press 

the “#” key for confirmation and input the same password 

again. After that, you can enter into the main setting 

menu and hear a voice prompt 

“press 1, add fingerprint; 

press 2, add password; press 3, delete user; press 4, 

voice settings.”

c.

 Press 1, 2, 3, 4 respectively to enter into the next level 

menu, and exit after ten seconds without operation.

Note:

Press “ * ” key to exit or return to the previous menu.

 


background image

2. Add Fingerprint

1.

Press the “#” key three times, input the administrator 

fingerprint or password to enter into the main menu, 

follow the voice prompt 

“press 1, add fingerprint sub 

menu”, 

and then

 “press 1, add administrator; press 2, add 

ordinary user”.

 Number the fingerprints or directly press 

the “#” key following the voice prompt.

The system will automatically match the number. Input 

fingerprints according to voice prompts. Note: press more 

than five times after the voice prompt 

“please press one 

more time”

, the fingerprint system will inform the user of 

successful enrollment. Otherwise, the system will require 

“please press again”.

 Please press the “*” key to return, 

and re-input again following the steps above.

2.

The system can store a maximum of 100 fingerprints, 

which are divided into the administrator fingerprint and 

ordinary user fingerprint.

3.

In order to ensure proper registration and recognition, 

please place the finger flat on the fingerprint collector 

while enrolling and avoid using fingertip and finger side. 

 


background image

3. Add Password

1.

Press the “#” key three times, input the administrator 

fingerprint or password to enter into the main menu, 

follow the voice prompt “

press 2, add password sub 

menu”

, and then 

“press 1, add administrator; press 2, add 

ordinary user”.

2.

Password length can vary from six to twelve digits 

3.

The system can store 20 groups of passwords, which 

can be divided into the administrator password and 

ordinary user password.

4. Delete User

1.

Press the “#” key three times to input administrator 

fingerprint or password to enter into the main menu, 

follow the voice prompt 

“press 3, delete user sub menu” 

and then 

“press 1, delete fingerprint; press 2, delete 

password; press 3, delete fingerprint or password by 

ordinal”

 to delete enrolled users.

2.

Administrators can be deleted freely except for the last 

one. Otherwise, the voice prompt will warn that “the only 

administrator cannot be deleted”.

 


background image

5. Voice Settings

Press the “#” key three times, 

“input the administrator 

fingerprint or password to enter into the main menu”

follow the voice prompt to press 4, 

“press 1, voice setting 

sub menu / turn the voice prompt on; press 2, turn the 

voice prompt off”.

6. Thief Proof Settings

If the door is opened under protection mode, the lock 

cylinder gives off a high-pitched alarm.

a.

 

Protect Mode: At the door, long press the “#” key for 

two seconds after successful verification until you hear 

“On Protection”.

b.

Unprotect: At the door, if the fingerprint / password is 

verified successfully, the protection would be lifted.

7. Resetting Function

Long press the resetting button, you will hear a buzzer 

every second as well as the prompt of 

“resetting soon” 

five seconds later. Press the “#” key for confirmation or 

“+” key to exit, then press the “#” key, you will hear 

“successful resetting”

.

Note:

After resetting, all user information will be emptied.

 


background image

FAQ

1. What if the batteries run down?

iLock is powered by four AAA batteries, so if the batteries 

are running down, it would give off an alarm to replace the 

battery, but if you forget, a portable battery can be used 

temporarily.

2. Can the lock identify accurately if my hands are

peeling or injured?

The broken fingerprint may affect the fingerprint recogni-

tion, so it is suggested that users enroll with their thumb, 

forefinger and middle finger (little finger and the ring finger 

are NOT allowed), so that, even if a finger is injured, users 

can open the door with other fingers; alternately, if the 

fingerprint is not recognized, users can use the password 

to open the door as well.

3. Pseudo Password Function
a. 

When a wrong password is input continuously five 

times, the keypad will be automatically locked for three 

minutes. It will not recognize any password during that 

period, but the correct fingerprint can be entered to 

remove the locked password.

b.

 When a wrong fingerprint is input continuously five 

times, the keypad will automatically be locked for three 

minutes. It will not recognize any fingerprint during that 

period, but the correct password can be entered to 

remove the locked fingerprint.

 


background image

®

 

Proteck Electronic Trading LLC.

Office # 705, Apricot Towers

Dubai Silicon Oasis - Dubai, UAE

+971-4-3929312

info@proteckglobal.com

For Technical Support

Call: 

+971-4-3929312

Email: 

info@eachgraincounts.com