Miiego AL3 User Manual - User Manual

Download PDF User Manual

Full Text Searchable PDF User Manual

Miiego

– AL3 Wireless Headphones

ENGLISH User Manual

QUICK-GUIDE

1-2-3

– go!:

Make sure the headset is charged and turned OFF.

Press and hold the big MFB Button on the headset (right ear pad) for
about 7 seconds until the red and blue LED flash alternatively
(pairing mode)

Activate Bluetooth on your mobile phone or device, and “seek for
new device”. Find”AL3” on the list and press ”connect”.

If asked for a PIN-code press: 0000

Thank you for buying the

AL3 Wireless Headphones

from Miiego.

This unit uses Bluetooth wireless technology.



Listen to and enjoy music wirelessly!



Hands-free communication



Useful rechargeable battery function

About AL3 Wireless Headphones from Miiego

AL3 is a stereo Bluetooth headset. It supports the following Bluetooth profiles:

A2DP

——

Advanced Audio Distribution Profile

AVRCP

——

Audio/Video Remote Control Profile

HSP

——

Headset Profile

HFP

——

Hands free Profile

Bluetooth wireless technology

Bluetooth is a standard of close range radio-communication technology. Through
Bluetooth technology, you can achieve the highest transmission rate among mobile
phones, computer, printer, PDA and other devices.

The max. transmission range of Bluetooth Class II is 10 meters.

This headset can e.g. be connected to a

Bluetooth enabled

mobile phone, PDA, PC, tablet

etc....

Steps for the Bluetooth functions:

1. Overview

Right Earpad:

Multifunction button (MFB):Switch on/off
the headset, answer, end and reject call,
mute, voice dial and voice transfer, redial
last number, pause and revert to play

Head band

– key: volume down

< key : previous song

+key: volume up

LED Indicator

> tast : next song

Built-in microphone

Charging port

Charging the headset

The first time you use the headset we advise you to fully charge the battery in order
to ensure the best performance of the battery. The battery is a re-chargeable
Lithium-Polymer battery.

Next time charging

When you hear a warning tone of “beep” every 30 seconds, at the same time, the
red light blinks. It means the battery is low on power and needs to be charged.

Charging the battery with USB cable

Step1: Insert USB charging cable into USB port of PC.

Step2: Connect charging cable with the charging port of headset.

When the red light is on, the headset is charging.

When the red light is off, the headset is charged fully.

Step3: It takes about 2-3 hours to charge the headset fully.

Warning:

1. The battery is recycled.

2. Do not dispose battery in fire, as it may cause explosion.



How to use

Switching the headset on / off

Function

Operation

LED indicator

Switch on

Press the MFB

for 3-4 seconds,

and release till

the blue light

blinks.

The blue light

blinks quickly

every 4 sec.

Switch off

Press the MFB

for 3-4 seconds,

and release till

the red light

blinks.

The red light

blinks quickly

every 4 sec.

2. Pairing with Bluetooth device
1) How to enter into pairing mode

Function

Operation

LED indicator

Enter into pairing

mode

Make sure the headset

is off. Press and hold

the MFB for 7

seconds, and release

when the red and blue

light blink alternately

The red and

blue lights

blink

alternately.

Note:

The pairing mode will last 2 minutes, If

the headset still can’t pair with any Bluetooth

devices after 2 minutes, it will switch into standby mode automatically.

2) Pairing with Bluetooth mobile phone

Please make sure your mobile phone has a Bluetooth function that can be used. Specific
pairing procedures may vary with different mobile phone. Please refer to your mobile
phone manual for further information.

Steps as follows:

Please keep the headset and mobile phone in the range of 1 meter when pairing.

Make the headset enter into pairing mode. (Make sure the headset is off. Press and
hold the MFB for 7 seconds, and release when the red and blue light blink alternately)

Start the Bluetooth function of mobile phone and search the Bluetooth devices. After
searched, select “AL3”in the Bluetooth device list.

According to indication, enter password or PIN No:”0000”,and press the key of” Yes”
or “confirmed”.

After successful pairing, select “AL3”.in the Bluetooth device list. and press “connect”.

After successful connecting, the blue light of the headset blinks twice every 4
seconds. The headset is now connected to the mobile phone and ready to use.

Note:



If the pairing is not successful, please switch off headset firstly, and then re-pair
according to the step a-f mentioned above..



After pairing is successful, paired devices will remember each other. Unless pairing
information is deleted because of new pairing, no need to pair when use next time.



The headset will connect with the latest paired device. If you want to pair with other
Bluetooth devices, please switch off the Bluetooth function of the current Bluetooth
device, and then pair and connect it with the new Bluetooth device according to steps
a-f mentioned above.

3) Pairing with Bluetooth transmitter

You can enjoy music wirelessly through connecting the headset with a stereo Bluetooth
transmitter,.

Pairing steps as follows:

Keep the Bluetooth transmitter and headset in the range of 1 meter (3 ft.) when
pairing.

Make the headset enter into pairing mode ((Make sure the headset is off. Press and
hold the MFB for 7 seconds, and release when the red and blue light blink alternately)

Turn on the Bluetooth transmitter. It will search Bluetooth device automatically and
start pairing.

When the headset requests PIN No, the Bluetooth transmitter need to respond “0000”
automatically

After successful pairing and connecting, the blue (or red) light of headset blinks twice
every 4 seconds and is now ready to use.

Note:

1. The pairing password of AL3

is “0000”, so, the headset can’t pair with the Bluetooth

transmitter which pairing password is not “0000”.

2. If the pairing is still not successful after trying several times, please refer to your

Bluetooth transmitter manual carefully..

Making calls with the headset

Function

Status of

headset

Operation

Indication tone

Voice dial

Standby mode

Press and hold the
MFB for 3 sec,
release the key
when you hear the
indication sound

A short tone

Redial last number

Standby mode

Press the MFB
twice

A short tone

Turn up volume

Conversation
mode

Short press or long
press + key

When max. is

reached you

hear: “DU DU”

Turn down volume

Conversation
mode

Short press or long
press - key

Nothing

Answer call

Ringing

Short press the
MFB

A short tone

Reject call

Ringing

Press and hold the
MFB for 2 sec, and
release the key
until you hear the
indication sound

A short tone

End call

Conversation
mode

Short press the
MFB

A short tone

Switch
conversation
between headset
and cell phone

Conversation
mode

Press and hold the
MFB for 2 sec,
release the key
when you hear the
indication sound

A short tone

Remarks:



Not all mobile phones support all the functions listed above. Please refer to the

instruction of your mobile phone.



For some mobile phones, when you press the key of accepting a call on the mobile

phone,  the  conversation  will  be  sent  to  the  mobile  phone.  At  this  time,  you  can
switch  the  call  to  headset  by  using  the  conversation  switch  button  or  through
operating  on  the  mobile  phone.  Please  refer  to  the  instruction  of  your  mobile
phone for further information.

4. Playing music

When the headset connects with the mobile phone or a Bluetooth transmitter which
supports A2DP, you can enjoy music through the headset wirelessly..

Function

Status of headset

Operation

Indication tone

Volume up

Playing music

Short press or
long press +
key

When max. is

reached you

hear: “DU DU”

Volume down

Playing music

Short press or
long press - key

nothing

Pause

Playing music

Short press the
MFB

A short tone

Revert

Pause

Short press the
MFB

A short tone

Last song

Playing music

Short press <
key

A short tone

Next song

Playing music

Short press >
key

A short tone

Remark:



For some mobile phones, it happens when they are playing music, the music will

transmit to the speaker of the mobile phone. E.g. iPhones. You have to choose
“transmit the sound through Bluetooth” in the “setting” of music play interface, and
then choose “AL3” in the device list, the music will be transmitted to the headset.
Please refer to the instruction of your mobile phone for further information.



Remote control the function of previous song/next song/pause/revert, your mobile

phone needs to support AVRCP. Please refer to the instruction of your mobile
phone or Bluetooth transmitter for further information.



Care and maintenance

Please read the following suggestions and instructions carefully, that will help you to fulfill
any warranty obligations and to enjoy this product.



Keep the headset dry and don’t put it in a dump place, in case of effecting the
interior circuit of the product



Don’t place the product under sunlight or in hot areas. High temperature will
shorten the life of electronic devices, destroy the battery, or distort certain plastic.



Don’t expose the product in cold areas. This may damage the internal circuit
board.



Don’t try to take apart the product. It may damage the product if you are not
professional.



Don’t use intensified chemicals or detergent to clean the product.



Don’t scrap the surface with sharp things



Warnings

To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture

Do not place objects filled with liquids, such as vases, on or near the product. Do not place
this unit in a place where it is exposed to humidity, dust, soot or steam, subject to direct
sunlight, or in a car waiting at a traffic signal or the like. It may cause a malfunction. Do not
put weight or pressure on the unit, as it may cause the product to deform during longer
storage.

Listening with this product at high volume may affect your hearing. It is strongly advised to
use precaution. Miiego Aps or any other supplier of the product cannot be held responsible
for any hearing damage. It is the responsibility of the user/consumer to control the volume
at a proper level. It is advised not to keep a high volume for at longer period of time. If you
experience any discomfort while or after using the Bluetooth device, stop using it
immediately. For traffic safety reasons, do not use the product while driving or operating
motor driven vehicles.

Keep away from animals and small children!

Using the Bluetooth device may not function on all mobile phones, depending on radio
wave conditions and location where the equipment is being used.

The Bluetooth word mark and logos are owned by the Bluetooth SIG., Inc. Other
trademarks and names are those of their respective owners.



FAQs

1 Q: What does it mean when red indicator light is on ?

A: Battery is low, needs to be recharged

2 Q: Why is the red light not bright when charging?

a) Please make sure the charging device connects with

headset. well

b) You didn’t use the headset for a long time, the battery may

dry up. At this time, you have to charge the battery for 30

minutes, and then the red light will be bright.

3 Q: How far is the effective rang between the headset and mobile

phone?

According to the Bluetooth standard, the max. controllable

range of Class2 headset is 10 meters. It varies under different

conditions and environments.

4 Q:

Why can´t my cell phone search and find the headset?

The mobile phone will not find the headset if the headset and

mobile phone are not under pairing mode, Make sure the

headset is under pairing mode and within the effective working

range, and then the headset can be paired and connected.

5 Q:

I can’t hear the voice of the person I am talking to when making a call?

a) Make sure the headset has been switched on.

b) Make sure the volume is not too low or muted

c) Make sure the headset connects with the mobile phone

correctly.

d) Make sure the distance between the headset and the cell

phone is in the normal working scope.

6 Q: Why is the voice not clear when having a phone call conversation?

A: Make sure the mobile phone is in the strong signal area and in the

function range of the headset.

7 Q:

Why can’t I control the functions of pause, revert,

previous song

and next song when playing music?

This function needs that your Bluetooth device supports

CP(Audio/Video Remote Control profile).



Specifications

Bluetooth version

Compatibility Bluetooth V2

Bluetooth profile

Headset, Hands free

，

HSP/ HFP/ A2DP/ AVRCP

Frequency Range:

2.4020 GHz - 2.4800GHz

Effective range:

10 meters in direct line

Working time

：

Music: Up to 5 hours*

Talk: Up to 7 hours*

Standby time

：

Up to

150 hours*

Battery:

Built-in re-chargeable lithium-polymer battery

Charging time

：

Approx. 2-3 hours

Dimensions

95*70*35 mm.

Weight

app. 45g

*Time stated above may vary, depending on ambient temperature or conditions of use.

Note:

This Bluetooth stereo headset complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This Bluetooth stereo headset may not cause
harmful interference, and (2) it must accept any interference received, including interference
that may cause undesired operation.

Buy more accessories for your headset at:

www.miiego.com