Full Text Searchable PDF User Manual

DEX-MG9997ZT/XSUC
1
1
2
3
6
7
12
11
4
5
8
9
10

DEX-MG9997ZT/XSUC
2
1
Turning the system on and adjusting
the volume
2
Ejecting a disc
3
4
5
6
7
8
9
Disc slot
Disc load button
Frequency tuning knob
Mode selectors
Preset tuning (Radio mode)
Disc selection (Disc mode)
LCD
Seek tuning (Radio mode)
Direct access to a desired program (Disc mode)
10
Scan button
11
12
Text button
Station selector and function buttons

DEX-MG9997ZT/XSUC
3
1
Minijack box
2
Stereo cable
3
Portable audio player (ex. iPod)
1
2
3

DEX-MG9997ZT/XSUC
4

DEX-MG9997ZT/XSUC
5
Push the “AM”, “FM”, “CD” or “AUX” button to turn
on that mode. The selected mode turns on directly.
Push these buttons if you want to switch from one mode to
Another.
If a disc is not set, CD player does not turn on.
If an audio cable is not connected into the audio input jack,
AUX mode does not turn on.

DEX-MG9997ZT/XSUC
6
Automatic disc changer
Your CD player is intended for use with 12 cm (4.7 in)
discs only.

DEX-MG9997ZT/XSUC
7
Tone and balance
Push the audio control knob: select mode
Rotate the knob: change values
BAS (-7 to +7): Adjusts low-pitched tones.
MID (-7 to +7): Adjusts mid-pitched tones.
TRE (-7 to +7): Adjusts high-pitched tones.
FAD (F7 to F1, 0, R1 to R7):
Adjusts sound balances between the front and rear
speakers.
BAL (L7 to L1, 0, R1 to R7):
Adjusts sound balances between the left and right
speakers.
ASL (ON or OFF): Switch the automatic sound levelizer
function.

DEX-MG9997ZT/XSUC
8
Automatic disc changer
Your CD player is intended for use with 12 cm (4.7 in)
discs only.

DEX-MG9997ZT/XSUC
9
Radio operation
(a) Listening to the radio

DEX-MG9997ZT/XSUC
10
Selecting a station
Preset tuning: Push the preset channel button (1 to 6)
or push the “CH DISC UP” or “DOWN” for the station you
want.
Presetting a station
1.
Tune in the desired station.
2.
Push the preset channel button and hold it until
a beep is heard. New preset channel and
frequency is shown in the display.

DEX-MG9997ZT/XSUC
11
Scan tuning: Push the “SCAN” button. “SCAN” appears
on the display. The radio will find the next station up the
band, stay there for a few seconds, and then scan again.
To select a station, push the “SCAN” button a second
time.
Preset scan tuning: Push the “SCAN” button and hold it
until you hear a beep. “P.SCAN” appears on the display.
The radio will tune in the next preset station up the band,
stay there for a few seconds, and then move to the next
preset station. To select a station, push the “SCAN”
button a second time.

DEX-MG9997ZT/XSUC
12
CD player operation
CD
CD
CD
CD
CD
CD
“CD”

DEX-MG9997ZT/XSUC
13
Playing a disc
“CD”

DEX-MG9997ZT/XSUC
14
Selecting a desired disc
On the screen: choose the desired disc number.

DEX-MG9997ZT/XSUC
15
Selecting a desired track
Fast forward:
Push the “SEEK TRACK up” and hold it to fast forward
the disc. When you release the button, the player will
resume playing from that position.
Reverse:
Push the “SEEK TRACK down” and hold it to reverse
the disc. When you release the button, the player will
resume playing from that position.
Searching for a desired track or a disc
Push the “SCAN” button.
The player will play the next track for 10 seconds, then
scan again. To select a track, push the “SCAN” button
a second time. If the player reaches the end of the disc,
it will continue scanning at track 1.
After all the tracks are scanned in one pass, normal
play resumes.
Push the “SCAN” button and hold it
until you hear a beep.
The program at the beginning of each disc will be
played for 10 seconds. To continue listening to the
program of your choice, push the “SCAN” button a
second time.

DEX-MG9997ZT/XSUC
16
AUX mode operation
Push “AUX” button to choose the AUX mode.
The “AUX” appears on the display.
To listen a music of your portable audio player, operate
your portable audio directly.