PDF User Manual

  1. Home
  2. Manuals
  3. Lexmark cs410 Quick Reference Manual

Lexmark cs410 Quick Reference Manual

Made by: Lexmark
Type: Quick Reference Guide
Category: Printer
Pages: 11
Size: 1.96 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

Quick Reference

Learning about the printer

Using the printer control panel

3

1

2

4

8

7

6

9

10

5

Use the

To

1

Display

View the printer status.

Set up and operate the printer.

2

Select button

Select menu options.

Save settings.

3

Arrow buttons Scroll through menus, or settings on the

display.

4

Keypad

Enter numbers, letters, or symbols.

5

Sleep button

Enable Sleep mode or Hibernate mode.

Notes:

Pressing any hard button, attaching a
device to a USB port, sending a print job,
or performing a power-on reset with the
main power switch wakes the printer
from Sleep mode.

Pressing the Sleep button or the power
switch will cause the printer to wake
from Hibernate mode.

6

Stop button

Stop all printer activity.

Use the

To

7

Back button

Return to the previous screen.

8

Home button

Go to the home screen.

9

Indicator light

Check the status of the printer.

10

Front USB port Connect a camera or flash drive to the printer.

Understanding the colors of the Sleep
button and indicator lights

The colors of the Sleep button and indicator lights on the control panel
signify a printer status or condition.

Indicator light

Printer status

Off

The printer is off or in Hibernate mode.

Blinking green

The printer is warming up, processing data,
or printing.

Solid green

The printer is on, but idle.

Blinking red

The printer requires user intervention.

Sleep button light

Printer status

Off

The printer is off, idle, or in Ready state.

Solid amber

The printer is in Sleep mode.

Blinking amber

The printer is entering or waking from
Hibernate mode.

Blinking amber for 0.1
second, then goes
completely off for 1.9
seconds in a slow, pulsing
pattern

The printer is in Hibernate mode.

Using the Embedded Web Server

Note: 

This feature is available only in network printers or printers

connected to print servers.

If the printer is installed on a network, then you can use the Embedded
Web Server to do the following:

View the virtual display of the printer control panel.

Check the status of the printer supplies.

Configure supply notifications.

Configure printer settings.

Configure network settings.

View reports.

To access the Embedded Web Server for your printer:

1

Obtain the printer IP address:

From the TCP/IP section in the Network/Ports menu

By printing a network setup page or menu settings page, and
then finding the TCP/IP section

Notes:

An IP address appears as four sets of numbers separated
by periods, such as 123.123.123.123.

If you are using a proxy server, then temporarily disable
it to load the Web page correctly.

2

Open a Web browser, and then type the printer IP address in the
address field.

3

Press 

Enter

.

The Embedded Web Server page appears.

Loading paper and specialty
media

Note: 

The Embedded Web Server is available only in network

printers or printers connected to print servers.

Setting the paper size and type

1

From the printer control panel, navigate to:

 > 

Settings

 > 

 > 

Paper Menu

 > 

 > 

Paper

Size/Type

 > 

2

Press the up or down arrow button to select the tray or feeder size,

and then press 

.

3

Press the up or down arrow button to select the paper size, and

then press 

.

4

Press the up or down arrow button to select the tray or feeder type,

and then press 

.

 

1

 


background image

5

Press the up or down arrow button to select the paper type, and

then press 

.

Configuring Universal paper settings

The Universal paper size is a user

defined setting that lets you print on

paper sizes that are not preset in the printer menus.

Notes:

The smallest supported Universal size is 76 x 127 mm (3 x 5
inches) and is loaded only in the multipurpose feeder and
manual feeder.

The largest supported Universal size is 215.9 x 359.9 mm (8.5 x
14.17 inches) and is loaded only in the multipurpose feeder and
manual feeder.

1

From the printer control panel, navigate to:

 > 

Settings

 > 

 > 

Paper Menu

 > 

 > 

Universal Setup

 >

 >

 Units of Measure

 > 

 > select a unit of measure >

2

Press the up or down arrow button until 

Portrait Height

 or

Portrait Width

 appears, and then press 

.

3

Enter the preferred settings using the keypad or press the left or
right arrow button to manually select the size you want, and then

press 

.

4

Press 

.

Loading the 250

 

and 550

sheet tray

The printer has one 250-sheet tray (Tray 1) with an integrated manual
feeder. The 250-sheet tray, the 650-sheet duo tray, and the 550-sheet
tray support the same paper sizes and types and are loaded in the same
way.

CAUTION—POTENTIAL INJURY: 

To reduce the risk of

equipment instability, load each tray separately. Keep all other
trays closed until needed.

1

Pull out the tray completely.

Note: 

Do not remove trays while a job is printing or while 

Busy

appears on the display. Doing so may cause a jam.

2

If the paper is longer than letter

size paper, then squeeze and then

slide the length guide at the back of the tray to extend it.

2

1

3

Squeeze, and then slide the length guide tab to the correct position
for the size of the paper being loaded.

1

2

Note: 

Use the paper size indicators on the bottom of the tray to

help position the guide.

 

2

 


background image

4

Squeeze, and then slide the width guide tab to the correct position
for the size of the paper being loaded.

2

1

Note: 

Use the paper size indicators on the bottom of the tray to

help position the guides.

5

Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.

6

Load the paper stack with the recommended printable side faceup.

7

Place the paper guides securely against the edges of the paper.

8

Insert the tray.

9

From the printer control panel, set the paper size and paper type
in the Paper menu to match the paper loaded in the tray.

Note: 

Mixing paper sizes or paper types in a tray may cause

jams.

Loading the 650

sheet duo tray

The 650

sheet duo tray (Tray 2) consists of a 550

sheet tray and an

integrated 100

sheet multipurpose feeder. The tray is loaded in the

same way as the 250

sheet tray and supports the same paper types

and sizes. The only differences are the look of the guide tabs and the
location of the paper size indicators.

CAUTION—POTENTIAL INJURY: 

To reduce the risk of

equipment instability, load each tray separately. Keep all other
trays closed until needed.

1

2

3

1

Length guide tab

2

Paper size indicator

3

Width guide tab

 

3

 


background image

Loading the multipurpose feeder

1

Push the multipurpose feeder latch to the left.

2

Open the multipurpose feeder.

3

Pull the multipurpose feeder extender.

Note: 

Guide the extender gently so that the multipurpose feeder

is fully extended and open.

4

Prepare the paper for loading.

Flex the sheets of paper back and forth to loosen them, and
then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.

Hold transparencies by the edges, and then fan them.
Straighten the edges on a level surface.

Note: 

Avoid touching the printable side of transparencies.

Be careful not to scratch them.

Flex a stack of envelopes back and forth to loosen them, and
then fan them. Straighten the edges on a level surface.

Warning—Potential Damage: 

Never use envelopes with

stamps, clasps, snaps, windows, coated linings, or self

stick

adhesives. These envelopes may severely damage the
printer.

5

Locate the maximum paper fill indicator and tab.

Note: 

Make sure the paper or specialty media is below the

maximum paper fill indicator located on the paper guides.

1

2

5

4

3

1

Width guide tab

2

Maximum paper fill indicator

3

Width guide

4

Feeder extender

5

Paper size indicator

 

4

 


background image

6

Load the paper, and then adjust the width guide to lightly touch
the edge of the paper stack.

Load paper, card stock, and transparencies with the
recommended printable side facedown and the top edge
entering the printer first.

Load envelopes with the flap side up and against the right side
of the paper guide.

Notes:

Do not load or close the multipurpose feeder while a job is
printing.

Load only one size and type of paper at a time.

Paper should lie flat in the multipurpose feeder. Make sure
the paper fits loosely in the multipurpose feeder and is not
bent or wrinkled.

7

From the printer control panel, set the paper size and type in the
Paper menu to match the paper loaded in the tray.

Loading the manual feeder

The standard 250

sheet tray has an integrated manual feeder that can

be used to print on different types of paper one sheet at a time.

1

Load a sheet of paper into the manual feeder:

Printable side facedown for one-sided printing

Printable side faceup for two

sided (duplex) printing

Note: 

There are different ways for loading letterhead depending

on the mode of printing.

One

sided printing using a

letterhead

Two

sided printing using a

letterhead

ABC

ABC

Load envelope with the flap side up and against the right side
of the paper guide.

2

Feed paper into the manual feeder only to the point where its
leading edge can contact the paper guides.

Note: 

To achieve the best possible print quality, use only

high

quality media designed for laser printers.

3

Adjust the paper guides to the width of the paper loaded.

Warning—Potential Damage: 

Do not force the paper into the

feeder. Forcing the paper may cause jams.

Linking and unlinking trays

Linking and unlinking trays

Note: 

This feature applies only in network printers.

1

Open a Web browser, and then type the printer IP address in the
address field.

Notes:

View the printer IP address in the TCP/IP section in the
Network/Ports menu. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

If you are using a proxy server, then temporarily disable it to
load the Web page correctly.

2

Click 

Settings

 > 

Paper Menu

.

3

Change the tray settings to specify the paper size and type for the
tray.

To link trays, make sure the paper size and type for the tray
match with that of the other tray.

To unlink trays, make sure the paper size or type for the tray

does not

 match with that of the other tray.

4

Click 

Submit

.

Warning—Potential Damage: 

Paper loaded in the tray should match

the paper type name assigned in the printer. The temperature of the
fuser varies according to the specified paper type. Printing issues
may occur if settings are not properly configured.

 

5

 


background image

Creating a custom name for a paper type

1

Open a Web browser, and then type the printer IP address in the
address field.

Notes:

View the printer IP address in the TCP/IP section in the
Network/Ports menu. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

If you are using a proxy server, then temporarily disable it to
load the Web page correctly.

2

Click 

Settings

 > 

Paper Menu

 > 

Custom Names

.

3

Select a custom name, and then type a new custom paper type
name.

4

Click 

Submit

.

5

Click 

Custom Types

, and then verify if the new custom paper type

name has replaced the custom name.

Assigning a custom paper type

Using the Embedded Web Server

1

Open a Web browser, and then type the printer IP address in the
address field.

Notes:

View the printer IP address in the TCP/IP section in the
Network/Ports menu. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

If you are using a proxy server, then temporarily disable it to
load the Web page correctly.

2

Click 

Settings

 > 

Paper Menu

 > 

Custom Types

.

3

Select a custom paper type name, and then select a paper type.

Note: 

Paper is the factory default paper type for all user

defined

custom names.

4

Click 

Submit

.

Using the printer control panel

1

From the printer control panel, navigate to:

 > 

Settings

 > 

 > 

Paper Menu

 > 

 > 

Custom Types

2

Select a custom paper type name, and then select a paper type.

Note: 

Paper is the factory default paper type for all user

defined

custom names.

3

Press 

.

Printing

Note: 

The Embedded Web Server is available only in network

printers or printers connected to print servers.

Printing a document

1

From the Paper menu on the printer control panel, set the paper
type and size to match the paper loaded.

2

Send the print job:

For Windows users

a

With a document open, click 

File

 > 

Print

.

b

Click 

Properties

Preferences

Options

, or 

Setup

.

c

Adjust the settings, if necessary.

d

Click 

OK

 > 

Print

.

For Macintosh users

a

Customize the settings in the Page Setup dialog:

1

With a document open, choose 

File

 > 

Page Setup

.

2

Choose a paper size or create a custom size to match the
paper loaded.

3

Click 

OK

.

b

Customize the settings in the Print dialog:

1

With a document open, choose 

File

 > 

Print

.

If necessary, click the disclosure triangle to see more
options.

2

From the Print dialog and pop

up menus, adjust the settings

if necessary.

Note: 

To print on a specific paper type, adjust the

paper type setting to match the paper loaded, or select
the appropriate tray or feeder.

3

Click 

Print

.

Printing in black and white

From the printer control panel, navigate to:

 > 

Settings

 > 

 > 

Settings

 > 

 > 

Print Settings

 > 

 >

Quality Menu

 > 

 > 

Print Mode

 > 

 > 

Black Only

 > 

Adjusting toner darkness

Using the Embedded Web Server

1

Open a Web browser, and then type the IP address of the printer
in the address field.

Notes:

View the printer IP address in the TCP/IP section in the
Network/Ports menu. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

If you are using a proxy server, then temporarily disable it to
load the Web page correctly.

2

Click 

Settings

 > 

Print Settings

 > 

Quality Menu

 > 

Toner Darkness

.

3

Adjust the toner darkness, and then click 

Submit

.

Using the printer control panel

1

From the printer control panel, navigate to:

 > 

Settings

 > 

 > 

Settings

 > 

 > 

Print Settings

 > 

 >

Quality Menu

 > 

 > 

Toner Darkness

2

Adjust the toner darkness, and then press 

.

Using Max Speed and Max Yield

Max Speed and Max Yield let you choose between a faster print speed
and a higher toner yield. Max Yield is the factory default setting.

Max Speed

—This lets you print in either black or color depending

on the setting in the printer driver. The printer prints in color unless

Black Only

 is selected in the printer driver.

Max Yield

—This lets you switch from black to color based on the

color content found on each page.

Note: 

Frequent color mode switching can result to slower

printing if the content of the pages is mixed.

Using the Embedded Web Server

1

Open a Web browser, and then type the printer IP address in the
address field.

 

6

 


background image

Notes:

View the printer IP address in the TCP/IP section in the
Network/Ports menu. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

If you are using a proxy server, then temporarily disable it to
load the Web page correctly.

2

Click 

Settings

 > 

Print Settings

 > 

Setup Menu

.

3

From the Printer Usage list, select 

Max Speed

 or 

Max Yield

.

4

Click 

Submit

.

Using the printer control panel

1

From the printer control panel, navigate to:

 > 

Settings

 > 

 > 

Settings

 > 

 > 

Print Settings

 > 

 >

Setup Menu

 > 

 > 

Printer Usage

 > 

2

Select 

Max Speed

 or 

Max Yield

, and then press 

.

Canceling a print job

Canceling a print job from the printer control
panel

1

From the printer control panel, press 

.

2

When a list of print jobs appears, select the job to cancel, and then

press 

.

3

Press 

 to go back to the home screen.

Canceling a print job from the computer

For Windows users

1

Open the printers folder, and then select your printer.

2

From the print queue, select the print job you want to cancel, and
then delete it.

For Macintosh users

1

From System Preferences in the Apple menu, navigate to your
printer.

2

From the print queue, select the print job you want to cancel, and
then delete it.

Clearing jams

Warning—Potential Damage: 

Never use any tool to remove a jam.

Doing so could permanently damage the fuser.

[x]

page jam, clear standard bin.

1

Firmly grasp the jammed paper on each side, and then gently pull
it out.

Note: 

Make sure all paper fragments are removed.

2

From the printer control panel, touch 

 to clear the message

and continue printing. For non

touch

screen printer models, select

Next

 > 

Clear the jam, press OK

, and then press 

 to confirm.

[x]-page jam, open front door to clear
fuser.

1

Open the front door.

CAUTION—HOT SURFACE: 

The inside of the printer might

be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.

2

Pull the green lever to open the fuser cover.

3

Hold down the fuser cover, and then remove the jammed paper.

 

7

 


background image

Note: 

Make sure all paper fragments are removed.

4

Close the front door.

5

From the printer control panel, touch 

 to clear the message

and continue printing. For non

touch

screen printer models, select

Next

 > 

Clear the jam, press OK

, and then press 

 to confirm.

[x]-page jam, open front door.

1

Open the front door.

CAUTION—HOT SURFACE: 

The inside of the printer might

be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.

2

Firmly grasp the jammed paper on each side, and then gently pull
it out.

Note: 

Make sure all paper fragments are removed.

3

Close the front door.

4

From the printer control panel, touch 

 to clear the message

and continue printing. For non

touch

screen printer models, select

Next

 > 

Clear the jam, press OK

, and then press 

 to confirm.

[x]

page jam, open front door to clear

duplex.

1

Open the front door.

CAUTION—HOT SURFACE: 

The inside of the printer might

be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.

 

8

 


background image

2

Firmly grasp the jammed paper on each side, and then gently pull
it out.

Note: 

Make sure all paper fragments are removed.

3

Close the front door.

4

From the printer control panel, touch 

 to clear the message

and continue printing. For non

touch

screen printer models, select

Next

 > 

Clear the jam, press OK

, and then press 

 to confirm.

[x]

page jam, clear manual feeder.

1

Pull out the standard 250-sheet tray (Tray 1) and manual feeder.

2

Grasp the jammed paper on each side, and then gently pull it out.

Note: 

Make sure all paper fragments are removed.

3

Insert the tray.

4

From the printer control panel, touch 

 to clear the message

and continue printing. For non

touch

screen printer models, select

Next

 > 

Clear the jam, press OK

, and then press 

 to confirm.

[x]

page jam, open tray [x].

1

Pull the tray completely out of the printer.

Note: 

The message on the printer display determines in which

tray the paper jam is located.

2

Firmly grasp the jammed paper on each side, and then gently pull
it out.

Note: 

Make sure all paper fragments are removed.

3

Insert the tray.

4

From the printer control panel, touch 

 to clear the message

and continue printing. For non

touch

screen printer models, select

Next

 > 

Clear the jam, press OK

, and then press 

 to confirm.

 

9

 


background image

[x]

page jam, clear multipurpose feeder

1

Push the paper release lever in the multipurpose feeder to access
the jammed paper, and then gently pull it out.

Note: 

Make sure all paper fragments are removed.

1

2

2

Flex the sheets of paper back and forth to loosen them, and then
fan them. Do not fold or crease the paper. Straighten the edges on
a level surface.

3

Reload paper into the multipurpose feeder.

4

Slide the paper guide until it rests lightly against the edge of the
paper stack.

5

From the printer control panel, touch 

 to clear the message

and continue printing. For non

touch

screen printer models, select

Next

 > 

 > 

Clear the jam, press OK

 >

.

 

10