PDF User Manual

  1. Home
  2. Manuals
  3. Lexmark S300 Series Installation Manual

Lexmark S300 Series Installation Manual

Made by: Lexmark
Type: Installation Guide
Category: Printer
Pages: 10
Size: 0.41 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

1

Unpack printer

Notes:

Place the printer near the computer
during setup. If you're setting up on
a wireless network, then you may
move the printer after setup is
complete.

Do not attach the USB cable until
prompted to do so.

The packaged printhead is shipped
inside the printer.

Contents may vary by model and
region.

2

Remove tape and packing material from all areas of the

printer

Lexmark S300 Series Installation

 


background image

3

Raise paper support

4

Raise printer control panel

Lexmark S300 Series Installation

 


background image

5

Open printer and remove packaged printhead from

printer

6

If necessary, insert correct (1) language overlay and install

(2) protective cover

Lexmark S300 Series Installation

 


background image

7

Lock the protective cover in place

8

Close printer

Lexmark S300 Series Installation

 


background image

9

Use lever to extend paper guides

10

Load paper

Note: 

Use the lever to adjust the paper

guides.

Lexmark S300 Series Installation

 


background image

11

Extend paper exit tray

12

Connect power cord only

Note: 

DO NOT attach the USB cable yet.

 

CAUTION—POTENTIAL INJURY:

  Read the safety information included with this product before connecting

power or making any cabling connections.

13

Make sure printer is on

Lexmark S300 Series Installation

 


background image

14

Set language

1

Using the printer control panel, press

  or    until the language you want

appears on the display.

2

Press 

OK 

 to save.

15

Set country/region

1

Using the printer control panel, press

  or    until the country or region

you want appears on the display.

2

Press 

OK 

 to save.

16

Open printer and remove any tape from latch

Note: 

The carriage moves to the

printhead installation position as shown.

Lexmark S300 Series Installation

 


background image

17

Squeeze and lift latch

18

Remove printhead from disposable container

19

Insert printhead and close latch until it clicks

Lexmark S300 Series Installation

 


background image

20

Close printer

21

Open printer

Note: 

The printhead moves to the

cartridge installation position as shown.

Lexmark S300 Series Installation

 


background image

22

First, insert each color ink cartridge. Then, use two hands

to install black cartridge.

23

Close printer

24

Press OK to print alignment page

Notes:

Do not remove the page until
printing stops. The alignment page
may take a while to print and will
move in and out during the process.

Streaks on the alignment page are
normal and not an indication of a
problem.

The alignment page that prints may
differ from the one shown.

Recycle the alignment page.

Lexmark S300 Series Installation