PDF User Manual

  1. Home
  2. Manuals
  3. Lexmark Pro700 Series Installation Manual

Lexmark Pro700 Series Installation Manual

Made by: Lexmark
Type: Installation Guide
Category: Printer
Pages: 10
Size: 0.44 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

1

Unpack printer

Notes:

Place the printer near the computer
during setup. If you're setting up on
a wireless network, then you may
move the printer after setup is
complete.

Do not attach the USB cable until
prompted to do so.

The packaged printhead is shipped
inside the printer.

Contents may vary by model and
region.

2

Remove tape and packing material from all areas of the

printer

Lexmark Pro700 Series Installation

 


background image

3

Open printer and remove packaged printhead

4

If necessary, insert correct (1) language overlay and install

(2) protective cover

Lexmark Pro700 Series Installation

 


background image

5

Lock the protective cover in place

6

Close printer

Lexmark Pro700 Series Installation

 


background image

7

Pull paper tray completely out of printer

8

Move paper guides to the sides

9

For A4 or Legal, extend paper tray

Lexmark Pro700 Series Installation

 


background image

10

Load paper and adjust paper guides

Note: 

Do not load paper past the

maximum height indicator line as shown
in step 2.

11

Insert paper tray

Lexmark Pro700 Series Installation

 


background image

12

Connect power cord only

Note: 

DO NOT attach the USB cable yet.

 

CAUTION—POTENTIAL INJURY:

  Read the safety information included with this product before connecting

power or making any cabling connections.

13

Make sure printer is on

14

Follow prompts on the printer control panel

1

Follow the prompts on the printer
control panel.

2

After following the prompts, click

Continue

 below.

Lexmark Pro700 Series Installation

 


background image

15

Install printhead and ink cartridges

If you need to install the printhead and
cartridges, click 

Continue

.

If not, you can close this window.

16

Open printer and remove any tape from latch

Note: 

The carriage moves to the

printhead installation position as shown.

17

Squeeze and lift latch

Lexmark Pro700 Series Installation

 


background image

18

Remove printhead from disposable container

19

Insert printhead and close latch until it clicks

20

Close printer

Lexmark Pro700 Series Installation

 


background image

21

Open printer

Note: 

The printhead moves to the

cartridge installation position as shown.

22

First, insert each color ink cartridge. Then, use two hands

to install black cartridge.

Lexmark Pro700 Series Installation

 


background image

23

Close printer

24

Flip and extend exit tray paper stop

Notes:

Extend the paper exit tray for
A4/Legal.

The paper stop holds paper as it exits
the printer.

25

Press OK to print alignment page

Notes:

Do not remove the page until
printing stops. The alignment page
may take a while to print and will
move in and out during the process.

Streaks on the alignment page are
normal and not an indication of a
problem.

The alignment page that prints may
differ from the one shown.

Recycle the alignment page.

Lexmark Pro700 Series Installation