PDF User Manual

Do Not Print This Page

PRINTING INSTRUCTIONS

SIZE: 11X17 INCHES

PRINT BOTH SIDES

COLORS: BLACK AND WHITE

PAPER: 

NOT

 

SPECIFIED

FOLDS: 1

FINISHED SIZE: 8.5X11 INCHES

FOLD TO 8.5 X 11

COVER

INSIDE

BACK

 

MTM Warranty

We’re dedicated to making your LEVO experience the best it can 
be.  We provide a Three Year Warranty with this model# 33778. 
See our website for details: www.LEVOstore.com.

MTM, Inc. is not responsible for damage to any device caused by 
improperly securing device to LEVO.

As the manufacturer, we are most knowledgeable of this item. If you have any questions 

or issues regarding your new LEVO, use one of the methods below to contact our 

customer service.

email: sales@bookholder.com

  (best method to contact us)

Phone: 1-800-928-2322

Outside the USA 1-863-815-7077

www.LEVOstore.com

MTM Inc., U.S.A.

U.S. Patent No. 7,040,591 other patents pending

made in china

Questions?

Please do not contact your retailer

T

ENSION

 D

IALS

The four TENSION DIALS 
can be tightened or 
loosened to your desire 
with a coin. 

Using 

a screwdriver will 
damage the TENSION 
DIAL.  

H

EIGHT

 L

OCKS

Adjusting your LEVO’s 
height is quick with 
our LEVO quick snaps. 

ALWAYS HOLD THE 
PLATFORM WHILE 
ADJUSTING HEIGHT.

The best way to 
use your new 
LEVO

Owner’s Manual

Item# 33760

Deluxe Tablet Floor Stand

LEVO

 F

EATURES

ur LEVO experience the best it can 

arranty with this model# 33778. 

ww.LEVOstore.com.

 damage to any device caused by 

LEVO.

s Manual

 33760

et Floor Stand

Y

OUR

 LEVO B

OOK

 H

OLDER

 

IS

 

NOW

 

READY

 

TO

 

SHOW

 

YOU

 

THE

 

COOLEST

 

WAY

 

TO

 

READ

!

on your lap while you sit.  Loosen 

the strap from itself to allow space to insert 

.  Place the 

first few pages of your book under the left 

Pull the 
downward, loop it around, and 
firmly attach it to itself.

Securing the right 
the size of your book.  For large heavy books 
(2 1/2 to 4 lbs.) leave 100 to 150 pages for 
reading, and tightly strap the rest under the 
right
can leave more pages for reading.  Test your 
mount by flipping the 
down.  Your book should remain firmly in 
place.

5

Mounting your book is easiest with the 
bookboard
the strap from itself to allow space to insert 
your book behind the 
first few pages of your book under the left 
page-plate.

S

ECURING

 Y

OUR

 B

OOK

Mounting your book is easiest with the bookboard on your lap while you sit. 
Loosen the strap from itself to allow space to insert your book behind the page-
plate. Place the fi rst few pages of your book under the left page-plate.

Pull the strap tightly downward, loop it around, and fi rmly attach it to itself. 

Securing the right page-plate will depend on the size of your book. For large 
heavy books (2 1/2 to 4 lbs.) leave 100 to 150 pages for reading, and tightly strap 
the rest under the right page-plate. For small light books, you can leave more 
pages for reading. Test your mount by fl ipping the bookboard upside down. Your 
book should remain fi rmly in place.

Turning Pages

 

Turning pages is easy, even with one hand. First, grasp the top of the page with 
your left hand (if you use your right hand, you might tear your page). Tug the 
page to the left, releasing it from the pageholder. Of course, you can use your 
right hand to lift the page-holder if you choose.

Next, turn the page and lift the left pageholder with your remaining fi ngers. Tuck 
the page under the page-holder and release. It takes a couple turns to get the 
hang of it. You can experiment with one and two handed page turning to develop 
your own technique.

 

P

USH

CASTERS into 

holes in bottom 

of HEAVY BASE.

1

2

C

 S

NAP

TABS into 
RECEPTACLES.

2

B

 S

LIDE

TOP 
CONNECTOR 
CAP in place.

2

D

 S

PIN

CONNECTOR 

CAP until very 

tight.

S

ET

WASHER and 

BASE COVER on 

HEAVY BASE

2

T

AB

R

ECEPTACLE

6

Book Platform (1)

Swing-arm (1)

Triple Column (1)

Top Connector 
Cap (1)

Connector 
Center (1)

Base Cover (1)

Heavy Base (1)

Base Washer (2)

Base Washer (2)

Casters (4)

Tension Dial (1)
Tension Ram (1)

A

SSEMBLY

LEVO Deluxe Tablet Floor Stand - tem# 33778

S

PIN

BOTTOM 

CONNECTOR CAP 

until very tight.

3

S

LOT

N

OTCH

S

LOT

N

OTCH

2

A

Separate 
the Top 
Connector 
Cap and 
Bottom 
Connector 
Cap from 
Connector 
Center 

T

IGHTEN

TENSION DIAL with coin until 
snug. 

Do not overtighten. Do 

not use a screwdriver.

4

Coin

T

AB

R

ECEPTACLE

P

USH

Push Platform into Swing Arm until TAB snaps into 
RECEPTACLE. 

Important - test the connection by pulling 

on platform. Be sure the Platform does not pull out.

NOTE: this step is shown with optional Tablet Platform.

Mount the two page-holders 
to the holes in the bottom 
corners of the bookboard. 
Follow the diagram for correct 
hardware placement. Tighten 
the small nut with just enough 
force so the page-holders will 
rotate with little eff ort. The 
rotation lets you adjust the 
page-holders to fi t any size 
book. 

NOTE: the small nut has 

a friction fi tting that keeps it 
from loosening. You’ll need 
to use a wrench (or pliers) to 
tighten the nut.

Small Screw

Page Holder

Small Washer

Small Nut

Book 
Platform

5

Book Platform (1)

Swing-arm (1)

Triple Column (1)

Top Connector 
Cap (1)

Connector 
Center (1)

Base Cover (1)

Heavy Base (1)

Base Washer (2)

Base Washer (2)

Casters (4)

Tension Dial (1)
Tension Ram (

(

(

(

(

(

(

(

(

1)

Bottom 
Connector 
Cap (1)