PDF User Manual

  1. Home
  2. Manuals
  3. Leviton Vizia RF RZCPG User Manual

Leviton Vizia RF RZCPG User Manual

Made by: Leviton
Type: User Guide
Category: Remote Control
Pages: 13
Size: 2.29 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

Programmer/Remote

Cat. RZCPG

USER GUIDE

Compatible with

enabled products!

TM

ON

ON

ON

ON

+

OFF

OFF

OFF

OFF


background image

INTRODUCTION .......................................................1 
MENU NAVIGATION & ICONS .............................2–4
STARTUP...................................................................5 
INSTALLATION CHECKLIST ...................................5

Include Dimmers/Switches ....................................6
TEXT EDITOR ...................................................6, 7
Include Controller ...........................................7, 8
Update Controller ............................................8, 9
Create Areas ..................................................9, 10
Set Associations .........................................10, 11
Security .............................................................. 11
Install Complete.................................................12

MAIN MENU SCREEN ............................................13
DEVICE LIST ...........................................................13

wHO IS.. .............................................................13
AREA ..................................................................14
PROfILE .......................................................14, 15
EVENTS ........................................................15, 16
SETTINGS ..........................................................16
  DATE & TIME .................................................16
  CONTRAST ....................................................17
  BUZZER .........................................................17
  LOCATION .....................................................17
  SECURITY ......................................................18
  BATTERY LEVEL ...........................................18
  EVENTS SETUP .............................................18
SYSTEM SETUP (Advanced Settings) ............19
  NETwORK ...............................................19–22
  ASSOCIATION ...............................................22
  HAI SETUP ....................................................23
  RTS DEVICES ...............................................23
  UTILITIES .................................................23, 24

TABLE Of CONTENTS


background image

Leviton’s Programmer/Remote, Cat. No. RZCPG, is a multi-

functional device. It uses Z-Wave

TM

 technology to act as a 

programmer, zone or scene controller, remote and timer for 

setting up and operating your Vizia

TM

 RF network. This manual 

will guide you through the understanding of your RZCPG 

functions as a setup controller. Once your network is installed, 

your RZCPG may also be used as a wireless controller for 

activating events, and controlling your lighting system.
Your RZCPG comes with rechargeable batteries, a 

programmer/remote stand, and a power adapter.

NOTE:

 Upon initial installation, you will need to charge your 

RZCPG for twelve (12) hours before programming and use.

wARNING:

 Leviton only supports the use of the supplied 

rechargeable Ni-MH "AA" size batteries.

INTRODUCTION

1

ON

ON

ON

ON

+

OFF

OFF

OFF

OFF

RZCPG

Programmer/Remote

RZCPG 

Stand

Power

Adapter

This equipment has been tested and found to comply with the limits 

for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment 

generates, uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to 

radio or television reception, which can be determined by turning 

the equipment OFF and ON, the user is encouraged to try to correct 

the interference by one or more of the following measures:

•  Reorient or relocate the receiving Antenna.

•  Increase the separation between the equipment and the 

receiver.

•  Connect the equipment into an outlet on a circuit different from 

that  to which the receiver is connected.

•  Consult the dealer or an experienced radio/tv technician for help.

 fCC COMPLIANCE STATEMENT


background image

The right soft key 

brings 

you to the 

MAIN

 

MENU

 screen 

from the 

HOME

 screen and is 

used for saving and completing 

tasks.
The left soft key 

is used 

to bring you back to the previous 

screen.

The up 

and down 

arrow buttons allow 

you to scroll through each screen and will move 

the 

selection box  ( 1. Device List

       

)

 to each 

choice.

NOTE:

 Selections are made on 

each screen by pressing the 

center 

button

 on the RZCPG unless 

prompted otherwise.

MENU NAVIGATION and ICONS

Navigating screens and menus on your RZCPG is 

accomplished using the following buttons: 

x1

Ba ck 

MAIN MENU

1.  Device List

2.  Who Is...

3.  Area

4.  Profile

5.  Events

Home

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

LCD

Display

(HOME screen 

depicted)

Right Soft 

Key

Arrow

Buttons

(up, down, 

left, right)

Center

Button

"+" 

Button

"–" 

Button

Left  

Soft Key 

2

CENTER BUTTON

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu


background image

The

 filter

           is used when 

you wish to view 

only

 checked 

devices, or 

only

 unchecked 

devices from a list. Use the 

right arrow button        to toggle 

between showing devices 

checked, unchecked 

or

 all 

(no 

filter)

.

x1

Back

(3)

Area #1

Who Is

Bedroom
Bathroom

Hall

selected 3

 

ON 

 

ON 

 

ON 

 

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

M

o

n

 0

5

.0

1

.2

0

0

 6 

Default Pr

 ofil 

Stand By

M

en

u

x1

Back

Home

AREA

<< NEW >>

<<NEw>>

  appears on various 

screens as a prompt to create 

something new 

(Area, Profile, 

Event, etc.)

Leviton also provides various icons that appear on 

the screens to provide quick review of the state 

of your network, selections made and to assist in 

identification of devices 

(refer to Icon Description 

chart).

3

x1

Back

(3)

All Devices

Dimmer #1
Switch #1

Switch #2

 selected 1

Who Is

x1

Back

PROFILE

<< NEW >>

Done

Scene

Zone

Single brackets

 

designate that more than one 

choice is available. Use the left 

and right side arrow buttons 

to toggle between 

choices.

x1

Cancel

Save

All Devices

1. All Devices
2. < ON >
3. Default Fade

x1

Cancel

Save

All Devices

1. All Devices
2. < ON >
3. Default Fade

 

ON 

 

ON 

 

ON 

 

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

M

o

n

 0

5

.0

1

.2

0

0

 6 

Default Pr

 ofil 

Stand By

M

en

u

 

ON 

 

ON 

 

ON 

 

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

M

o

n

 0

5

.0

1

.2

0

0

 6 

Default Pr

 ofil 

Stand By

M

en

u

Check boxes

            are used 

when multiple selections are 

available. Use the       and 

buttons to select and deselect 

from a list.

x1

Back

(3)

All Devices

Dimmer #1
Switch #1

Switch #2

 selected 1

Who Is

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

x1

Back

(3)

Area #1

Who Is

Bedroom
Bathroom

Hall

selected 3

Radio buttons

          are used 

when an "either/or" single choice 

is available. Scroll the selection 

box to your choice and use the 

 

button to select.

x1

Back

PROFILE

<< NEW >>

Home

Profile #1

Profile #2

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu


background image

DESCRIPTION

Event Time

Undefined device

Center button

Remote Control

Zone/Scene Controller (Single or Multibutton)

Dimmer

Switch

Thermostat

Event is Set

Event Disabled or All Events are Disabled

Buzzer OFF (indication)

Buzzer OFF

Buzzer ON

Error Indication

Event Recurrence

One Time Event Date

Time of Day or Dawn/Dusk Offset

Filter (data on screen is filtered)

Power Adapter

Battery Power

Single choice (radio button) - not chosen

Single choice (radio button) - chosen

Multiple selection (checkbox) - not selected

Multiple selection (checkbox) - selected

ICON

4


background image

1.

  Use the arrow buttons to navigate and set the date 

& time using the       and        buttons.

2.

  Press right soft key      

(Save)

.

You will be prompted to  

START INSTALLATION 

CHECKLIST

Press right soft key      

(YES)

. The 

INSTALL CHECKLIST

 screen will 

appear.

NOTE:

 Upon initial power up of 

the RZCPG, the VIZIA

TM

RF logo 

will appear briefly and then the 

DATE & TIME

 screen will display, 

prompting the user to change 

the settings. 

NOTE:

 Leviton 

recommends setting the date and 

time before proceeding. Failure to 

do so will disable your events 

(refer to EVENTS  

pg. 15).

 Set the date and time for your RZCPG as 

follows:

STARTUP

x1

Cancel 

DATE & TIME 

Time: 09: 00 AM 

 Date: 06. 07. 2007

Wednesday 

Save

INSTALLATION CHECKLIST

x1

Back

INSTALL CHECKLIST

1. Include Dim/Swch
2. Include Controller
3. Update Controller
4. Create Areas
5. Set Associations

Next Step

x1

Back

3. Update Controller
4. Create Areas
5. Set Associations
6. Security
7. Install Complete

Next Step

INSTALL CHECKLIST

5

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

Leviton provides the Installation Checklist as a step 

by step tool to setup your Vizia

TM

RF network and 

recommends following these steps in order, specifically 

if you are a first time user. System design will impact 

performance, so it is necessary to include and update 

your devices in a specific order to ensure overall system 

performance and reliability. The Installation Checklist 

steps are shown below. When a step is completed, 

simply press the right soft key       to select 

NEXT STEP

 

and the RZCPG will bring you to the next screen.    

DATE & TIME

x1

NO

INSTALL CHEKLIST

YES

START

INSTALLATION

CHECKLIST


background image

Include Dimmers/Switches

Pressing the center button 

to select 

Include Dim/Swch

 

will bring you to the 

INCLUDE 

DIM/SwCH

 screen and put the 

RZCPG into Inclusion Mode. 

You will be prompted to press a 

button on your Dimmer, Switch or 

Plug-In Module. These devices 

require a simple one step process (button press) to 

include into the network 

(refer to individual device 

instruction sheet)

. Once the button is pressed on 

your Dimmer, Switch or Plug-In Module, the RZCPG 

will go through a communication process and assign 

the node information for that device. The 

TEXT 

EDITOR

 will display. You can now name your device. 

NOTE:

 The RZCPG is by default assigned #1. 

Using 

TEXT EDITOR

 you can 

either assign a name from a list 

of templates or assign a unique 

name to your device. 

NOTE:

 The right soft key       will 

toggle from 

Template

 to 

Abc

 to 

ABC

 to 

abc

 to 

123

 and back to 

Template

 again. This feature allows you to access 

the template names or to select capital/undercase 

letters and numerals to name your device. 

To use the pre-made Templates, 

with 

Template

 displayed, use the 

up and down arrow buttons  

to select a name. The RZCPG 

offers a list of over 100 commonly 

used names to choose from. 

NOTE:

 The template names are 

editable for customization if you 

choose to alter them.

STEP 1

x1

Cancel

INCLUDE DIM/SWCH
Press button on
Dimmer/Switch

x1

TEXT EDITOR

Switch #2

Levito

Save? Press

n

Switch #2

Template

TEXT EDITOR

x1

TEXT EDITOR

Switch #2
Leviton

Bedroom

Abc

Save? Press

6

Using your RZCPG, follow these steps to set up 

your ViziaRf

TM

 network:

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu


background image

7

To create a unique name or modify text,

 under 

ABC

 (or 

Abc, abc

123

) use the up and down arrow 

buttons           to change each letter or numeral and 

side arrow buttons           to navigate. The       and       

buttons can be used to insert and delete characters.
Once your template or created 

name is displayed, press the 

center button       .Your device 

has now been included in 

the network with your chosen 

name. The RZCPG will confirm 

inclusion with the name displayed 

and prompt you to continue to 

INCLUDE DIM/SwCH

 by pressing the center button        

or to continue to the 

NEXT STEP

 by pressing the 

right soft key      .

Include Controller

NOTE:

 The 

INSTALL 

CHECKLIST

 screen will appear 

with the selection box around 

STEP 2 -

 

Include Controller

 

when 

NEXT STEP

 is chosen from 

STEP 1

.

Press the center button       on 

the RZCPG to bring up the 

INCLUDE CNTRLLER

 screen, 

where you will be prompted to 

place the controller in program 

mode.

NOTE: 

Leviton Controllers 

require an inclusion process 

that differs from Dimmers, Switches and Plug-In 

Modules. Controllers must be placed into program 

mode before they can be included into the network 

(refer to individual device instruction sheet).

Once your controller has been placed in program 

mode, press the center button       on the RZCPG. 

The RZCPG will go through the communication 

process and assign the node information for that 

device. 

The TEXT EDITOR

 will display where you 

can name your device 

(refer to TEXT EDITOR  

pg. 6)

.

x1

Back

Next Step

    Node included!
Node ID# 2:
Bedroom

More? Press

INCLUDE DIM/SWCH

STEP 2

x1

Return

INCLUDE CNTRLLER

Place controller
in program mode
See Instruction sheet

Begin? Press

x1

Back

INSTALL CHECKLIST

1. Include Dim/Swch
2. Include Controller
3. Update Controller
4. Create Areas
5. Set Associations

Next Step

 

ON 

 

ON 

 

ON 

 

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

M

o

n

 0

5

.0

1

.2

0

0

 6 

Default Pr

 ofil 

Stand By

M

en

u

 

ON 

 

ON 

 

ON 

 

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

M

o

n

 0

5

.0

1

.2

0

0

 6 

Default Pr

 ofil 

Stand By

M

en

u

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu


background image

Once your name is displayed, 

press the center button      .The 

RZCPG will confirm inclusion 

and prompt you to continue to 

INCLUDE CONTROLLER

 by 

pressing the center button       or 

to continue to the 

NEXT STEP

 

by pressing the right soft key              

NOTE:

 The confirmation process will take some 

time, specifically in large networks. Remain close to 

the controller until the confirmation is complete.

Update Controller

NOTE:

 The 

INSTALL 

CHECKLIST

 screen will appear 

with the selection box around 

STEP 3 - Update Controller

 

when 

NEXT STEP

 is chosen 

from 

STEP 2

.

Press the center button 

to 

bring up the 

UPDATE CNTRLS

 

screen where a list of all the 

controllers in the network will be 

displayed. With the selection box 

around the first controller listed 

press the center button       . The 

RZCPG will prompt you to stand 

within 3 feet of that controller. 

Press the right soft key      

(YES)

 

to update your controller. 

NOTE:

 

It is important that you remain 

within 3 ft. of the controller 

you've selected from the list. 

If you are unsure about which 

controller you are updating 

you can use the "who Is" 

command (see pg. 13).

 

Leviton controllers will blink 

during the update process, 

confirming you are updating 

the correct controller.

Once the RZCPG confirms 

UPDATE

 it will display the updated node 

information. Press the center button        to finalize. 

x1

Back

Next Step

    Node included!
Node ID #3:
Room Controller

INCLUDE CNTRLLER

More? Press

STEP 3

x1

Back

(2)

Who Is

UPDATE CNTRLS

Room Controller
Hall Controller

x1

NO

YES

UPDATE

Please stand within
3 ft from controller
and press YES
to continue

x1

Return

UPDATE

Node Updated!

Node ID #4
Room controller

8

x1

Back

INSTALL CHECKLIST

1. Include Dim/Swch
2. Include Controller
3. Update Controller
4. Create Areas
5. Set Associations

Next Step


background image

Continue this process until all of your controllers 

have been updated. Each time you successfully 

update your controller it will be removed from the 

list. Once all of your controllers have been updated, 

press the right soft key      to continue to the 

NEXT 

STEP.

Create Areas

NOTE:

 The 

INSTALL 

CHECKLIST

 screen will appear 

with the selection box around 

STEP 4 - Create Areas

 when 

NEXT STEP

 is chosen from 

STEP 2

.

Press the center button       to  

bring up the 

AREA

 screen. With  

<< NEw >>

 selected press the 

center button       to bring up the 

CREATE AREA

 screen. You 

can now name your new area 

by pressing the center button   

(refer to TEXT EDITOR pg. 6). 

Once you name your new area, 

press the center button       to 

save the information and return 

to the 

CREATE AREA 

screen.

Scroll to and press the center 

button       to select 

Add Devices

 

which will bring up a list of the 

dimmers and switches you 

included in 

Step 1

 to add to your 

new area. Scroll to each device 

check box and use the 

     

and       

buttons to either add or subtract 

each device from your area. 

NOTE:

 You can use the  

4 ON

 button            on the 

bottom of the RZCPG to select 

ALL

 devices simultaneously. The 

4 Off

 button            deselects 

ALL

 devices. This feature will 

work whenever you encounter 

check box lists. 

9

STEP 4

x1

Cancel

CREATE AREA

 Name: Area #1
 Add Devices...

Save

x1

Back

(3)

AREA #1

Bedroom
Bathroom

Hall

 selected 1

Who Is

x1

Back

Next Step

AREA

<< NEW >>

Area #1

x1

Back

Next Step

AREA

<< NEW >>

x1

Back

INSTALL CHECKLIST

1. Include Dim/Swch
2. Include Controller
3. Update Controller
4. Create Areas
5. Set Associations

Next Step

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

1  

ON 

2  

ON 

3  

ON 

4  

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

Mon 05.01.200 6 

Default Pr ofil e 

Stand By

Menu

ON

OFF

ON

OFF


background image

Once you have checked the devices for your area 

press the center button        to save. The 

AREA

 

screen will display with your newly created area 

and prompt you to continue to create a new area by 

pressing the center button       to select 

<<NEw>> 

or 

to continue to the 

NEXT STEP 

by pressing the right 

soft key     .

NOTE:

 You can use the 

1 ON

 button            and  

1 Off

 button            on the RZCPG to turn the 

lights ON and OFF in an area that has the selection 

box around it.

Set Associations

NOTE:

 The 

INSTALL 

CHECKLIST 

screen will appear 

with the selection box around 

STEP 5 -

 

Set Associations

 

when 

NEXT STEP

 is chosen 

from 

STEP 4

Press the center button       to 

bring up the 

ASSOCIATION

 

screen.  

A list of controllers included in  

Step 2

 that support association 

will be displayed.
Scroll to and press the center 

button       to select the controller 

you wish to associate an area or 

areas to.
The 

CONTROLLER ASSOC

 

screen will display with the 

selection box around 

1. Button

 

prompting you to select the 

button

 on your controller that 

you wish to associate an area to. Use side arrow 

buttons           to toggle if applicable.
Scroll to 

2. Area

 and choose an area you wish to 

associate to the button you've selected. This will 

allow the button on the chosen controller to control 

the desired area.
Selecting

 3. Area ON/Off

 allows you to set an 

AREA ON/Off

 or 

SCENE

 command to that button 

on your controller 

(for SCENE commands refer to 

Advanced Settings)

.  

STEP 5

x1

Back

ASSOCIATION

Room Controller

Hall Controller
Den Controller

Next Step

x1

Cancel

CONTROLLER ASSOC

Dev: Room Controller

1. < Button 1 >
2. Area #1
3. Area ON/OFF

Save

10

x1

Back

INSTALL CHECKLIST

1. Include Dim/Swch
2. Include Controller
3. Update Controller
4. Create Areas
5. Set Associations

Next Step

ON

OFF

ON

OFF

 

ON 

 

ON 

 

ON 

 

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

M

o

n

 0

5

.0

1

.2

0

0

 6 

Default Pr

 ofil 

Stand By

M

en

u

 

ON 

 

ON 

 

ON 

 

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

M

o

n

 0

5

.0

1

.2

0

0

 6 

Default Pr

 ofil 

Stand By

M

en

u


background image

Once you are done press the right soft key 

(Save)

 to complete. You will be prompted to 

continue setting associations or to proceed to the 

NEXT STEP 

by pressing the right soft key      .

Security

NOTE:

 The 

INSTALL 

CHECKLIST 

screen will appear 

with the selection box around 

STEP 6 -

 

Security

 when 

NEXT 

STEP

 is chosen from 

STEP 5

.

Press the center button       to 

bring up the 

SECURITY

 screen. 

Press the center button       to 

select 

1.

 

Setup Password

Enter password using four of the 

eight buttons on the RZCPG  

(1 ON, 1 Off, 2 ON, 2 Off etc.)
NOTE:

 The password you 

choose 

MUST

 

be

 

4

 characters 

long.

You will be prompted to, and 

must re-enter password.

Scroll to 

2.

 and use the side 

arrow buttons           to toggle 

between choices 

OPEN, RZCPG 

Lock

 and 

System Lock

.

Press right soft key      

(Save)

 to complete.

NOTE:

 Selecting 

<RZCPG Lock>

 will lock the 

RZCPG. When you return to the 

HOME

 screen you 

will not have access to the 

MAIN MENU

 nor any 

screens until you press the right soft key      and 

enter your password.
Selecting 

<System Lock> 

will only lock 

System 

Setup

, preventing one from changing how the 

system is configured until the password is entered 

upon prompt.

11

STEP 6

x1

Back

SECURITY

1. Setup Password

2. < OPEN >

Save

x1

Back

SECURITY

1. Setup Password

2. < RZCPG Lock >

Save

x1

Back

2. Include Controller
3. Update Controller
4. Create Areas
5. Set Associations
6. Security

Next Step

INSTALL CHECKLIST

 

ON 

 

ON 

 

ON 

 

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

M

o

n

 0

5

.0

1

.2

0

0

 6 

Default Pr

 ofil 

Stand By

M

en

u

 

ON 

 

ON 

 

ON 

 

ON 

OFF 

OFF 

OFF 

OFF 

x1 

12:00 PM 

M

o

n

 0

5

.0

1

.2

0

0

 6 

Default Pr

 ofil 

Stand By

M

en

u