PDF User Manual

  1. Home
  2. Manuals
  3. Levana Stella User Manual

Levana Stella User Manual

Made by: Levana
Type: User Manual
Category: Baby Monitor
Pages: 23
Size: 4.04 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

Stella

mylevana.com

USER MANUAL

Digital Baby Video Monitor

CAUTION: Keep small parts away from children.


background image

 

CAUTION: Keep small parts away from children.

 

 

Strangulation Hazard:

 Children can become entangled in 

cords. Power cords should be kept more than 3 feet away 
from the crib and baby’s reach at all times. Baby monitors and 
cameras with power cords should never be hung on or near 
the crib.

 

This product is not a toy and should be kept out of 
children’s reach.

  This product contains small parts. Exercise care when 

unpacking and assembling the product.

   Read and Keep Instructions:

 All the safety and operating 

instructions should be read before the video baby monitor  
is operated.

 

This product cannot replace responsible adult supervision.

  Use only with provided power supply.

  The socket-outlet shall be installed near the equipment and 

shall be easily accessible.

  RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN 

INCORRECT TYPE!

  Dispose of used batteries according to the instructions.

  Use only batteries/power supplies listed in the user manual.

2

SAFETY WARNINGS

Water and Moisture:

 This product is designed for indoor use only. The unit should not be exposed to rain, moisture, dripping or splashing. No 

objects filled with liquid should be placed on top of, or beside the product, such as a glass or vase.  This item should not be used near water.

Non-Use Periods:

 Always unplug the AC adapters from the wall outlets during long periods of non-use.

Ventilation:

 This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the ventilation openings, or be placed in an 

enclosed area, such as a bookcase or drawer that may impede air flow.

Keep Away from Sources of Heat:

 This unit should not be exposed to direct heat sources such as a candle, fireplace, radiator, heat register, stove 

or other appliance that emits heat. The unit should not be left in direct sunlight.

Power Source:

 This unit should only be used with the AC power adapters included in this package (rated 5.9V 1A)

Damage Requiring Service:

 This unit should be serviced by qualified personnel only when:

a.  Objects have fallen or liquid has been spilled into the product
b.  The units have been exposed to rain
c.  The units do not appear to operate normally or exhibits a distinct change in performance
d.  The units have been dropped or the enclosure damaged

mylevana.com


background image

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)   This device may not cause harmful interference.
(2)   This device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. 

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful inerference to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and the receiver.

• 

Connect the equipment into an outlet different from that to which the receiver is connected.

• 

Consult the dealer or an experienced radio/TV technician for help.

IC STATEMENT / DÉCLARATION IC:

This Class B digital apparatus complies with ICES-003. / Cet appareil numérique de la classe B est conforme à la norme NMB-003  du Canada. 

This device complies with Industry Canada licence-exempt RSS 210 standard(s). Operation is subject to the following two conditions: (1) 
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired 
operation of the device.

Le présent appareil est conforme aux CNR 210 d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est 
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout 
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

FCC STATEMENT

3

mylevana.com


background image

We take quality very seriously. This is why all of our products come with a one-year warranty from the original purchase date against 
defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following methods:

Web:

  www.mylevana.com 

                                

Support: 

www.mylevana.com/support

          
 

            

LEVANA Canada              

                               LEVANA USA

 

            4080 Montrose Road      

                                60 Industrial Parkway #Z64

        

            Niagara Falls, ON 

                                Cheektowaga NY 

 

            Canada L2H 1J9 

                                USA 14227

Warranty Terms
1.  LEVANA

®

 products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials. 

This warranty is limited to the repair,  replacement or refund of the purchase price at LEVANA’s option. 

2.  This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered with contrary to the 

applicable instruction manual. 

3.  Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty. 
4.  The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other  warranty,  

expressed or implied is provided. LEVANA assumes no responsibilities for any other claims not specifically mentioned in this warranty. 

5.  This warranty does not cover the shipping cost, insurance or any other incidental charges. 
6.  You MUST contact LEVANA before sending any product back for repair. You will be sent a Return Authorization form with return 

instructions. When returning the product for warranty service, please pack it carefully in the original box with all supplied accessories, 
and enclose your original receipt or copy, and a brief explanation of the problem (include RA #). 

7.  This warranty is valid only in Canada and the continental U.S.
8.  This warranty cannot be re-issued.

mylevana.com

Please visit our website at www.myLEVANA.com for information about your 

product’s warranty

4

mylevana.com


background image

TABLE OF CONTENTS

SAFETY WARNINGS ..................................................................................................................................................................................................................... 2
FCC STATEMENT .......................................................................................................................................................................................................................... 3
WARRANTY ................................................................................................................................................................................................................................... 4
WHAT’S INCLUDED ..................................................................................................................................................................................................................... 6
BUTTONS AND CONNECTIONS - MONITOR ........................................................................................................................................................................ 7
BUTTONS AND CONNECTIONS - CAMERA ........................................................................................................................................................................... 8
SETUP ............................................................................................................................................................................................................................................. 9

Battery installation ....................................................................................................................................................................................................... 9
Connecting Power to the Monitor / Charging Battery ....................................................................................................................................... 10
Connecting Power to the Camera ......................................................................................................................................................................... 10
Screen Icons ................................................................................................................................................................................................................11

OPERATION ................................................................................................................................................................................................................................ 12

Turn the Monitor ON/OFF ........................................................................................................................................................................................ 12
Pairing the Cameras & Monitor ............................................................................................................................................................................... 12
Placement of the Monitor ........................................................................................................................................................................................ 13
Placement of the Camera ........................................................................................................................................................................................ 13
Mounting the Camera on a Tabletop Safely ......................................................................................................................................................... 13
Mounting the Camera on a Wall Safely ................................................................................................................................................................. 14
Night Vision ................................................................................................................................................................................................................. 15
Adjusting the Camera Angle .................................................................................................................................................................................... 15
Using the ZOOM Function ....................................................................................................................................................................................... 15
Volume ......................................................................................................................................................................................................................... 16
Using the Talk to Baby™ Two-Way Intercom ....................................................................................................................................................... 16
Selecting a Lullaby ..................................................................................................................................................................................................... 16
Setting the Lullaby Volume .......................................................................................................................................................................................17
Using PEEP Mode ........................................................................................................................................................................................................17
Changing the Camera View ..................................................................................................................................................................................... 18
Sound Sensitivity Settings ........................................................................................................................................................................................ 18
Setting the Brightness ............................................................................................................................................................................................... 19
Contacting Customer Support ................................................................................................................................................................................ 19

TROUBLESHOOTING ................................................................................................................................................................................................................20
SPECIFICATIONS ........................................................................................................................................................................................................................ 22

5

mylevana.com


background image

•  Pan/Tilt/Zoom Night Vision Camera
•  Baby Video Monitor
•  Rechargeable Battery
•  2 Power Adapters
•  Quick Start Guide
•  1 Year Warranty
•  Lifetime Live Customer Support

This product is not a toy.

This product contains small parts. Exercise care when unpacking and assembling the product.

This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

This product does not replace responsible adult supervision. Check on your child at regular intervals and make sure your monitor is always adequately charged.

LEVANA

®

 does not endorse any LEVANA

®

 products for illegal activities. Levana is not responsible or liable in any way for any damage, vandalism, theft or any other action that 

may occur while a LEVANA

®

 product is in use by the purchaser.

We reserve the right to change models, configuration, or specifications without notice or liability. Product may not be exactly as shown.

©2012 LEVANA

®

. All rights reserved. LEVANA

®

, the LEVANA

®

 logo, Stella

 and other LEVANA

®

 marks may be registered. All other Trademarks are the property of their 

respective owners.

WHAT’S INCLUDED

6

mylevana.com


background image

1. 

LCD SCREEN

2. 

MICROPHONE

3. 

POWER ON/OFF

4. 

TALK TO BABY™

 

Press and hold to talk, release  
to listen

5. 

LOCK / UNLOCK BUTTON

 

 

Disables ALL function buttons in the 
LOCK position

6. 

PAN / TILT BUTTON

7. 

MENU

8. 

COLOR-CHANGING  LED  RING                  

 

Ring changes color with sound 
intensity 

9. 

DIRECTIONAL ARROWS / VOLUME 

CONTROL 

10. 

POWER INPUT

11. 

SELECTION / ZOOM BUTTON

12. 

SPEAKER

13. 

TABLE STAND

14. 

ANTENNA 

Extend to improve signal 

15. 

BATTERY COMPARTMENT

MONITOR

14

15

12

13

11

4

5

6

9

10

3

2

7

1

8

7

mylevana.com


background image

1. 

PHOTO SENSOR

2. 

PTZ CAMERA

3. 

MICROPHONE

4. 

SPEAKER

5. 

INVISIBLE LEDs

6. 

POWER ON/OFF

7. 

ANTENNA

8. 

POWER LED

9. 

POWER INPUT

CAMERA

1

6

7

8

9

2

3

4

5

8

mylevana.com


background image

7. 

ANTENNA

8. 

POWER LED

9. 

POWER INPUT

LET’S GET STARTED!

Battery Installation

1.  Gently remove the BATTERY COMPARTMENT COVER on the back of  

the monitor. 

2.  Slide the BATTERY COMPARTMENT COVER down to remove.

3.  Insert the battery; the battery connectors on the battery should line up 

with the connectors inside the battery compartment.

4.  Slide the BATTERY COMPARTMENT COVER back into place.

 

 

PEEP Mode

: After 1 minute of inactivity, monitor enters standby/sleep mode. 

  Adjustable Brightness

: Decreasing screen brightness will extend battery life.

6.  For extended periods of non-use, please remove battery from baby monitor.

SETUP

Get the Most Out of Your Rechargeable Battery

1. Fully charge battery (6-7 hours) before first use.
2. To maximize battery life, charge battery before battery is fully drained.
3. Avoid extreme heat or cold as this will affect the life of the battery.
4. Turn LCD screen OFF; press POWER 

 button on the top of the monitor ONCE.

5. Stella

 menu settings that increase battery life:

Battery 

connectors

Battery 

connectors 

+  –

9

mylevana.com


background image

DC Input

Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation 
hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times.

Connecting Power to the Monitor / Charging Battery

1.  Connect the small end of one power adapter into the DC input on the side of the monitor as 

shown in the diagram. Connect the other end of the adapter into an available wall outlet.

2.    

Press and hold 

the POWER 

button on top of the monitor to turn the monitor ON.

3.  The icon in the top right corner of the main screen will show you the 

battery power status

.

4. The 

LED Ring 

on the front of the monitor also indicates the 

battery power status. 

SOLID BLUE

 = BATTERY FULLY CHARGED  

   SLOW FLASHING BLUE 

= BATTERY CHARGING

QUICK FLASHING BLUE 

= BATTERY LOW      

FLASHING PINK 

= PAIRING UNSUCCESSFUL

5.  For safety reasons, ONLY use the adapters included in the package.

EMPTY   

 

          CHARGING   FULL

Connecting Power to the Camera

1.  Take the second power adapter and connect the small end of the power adapter into 

the DC input on the side of the camera base. For safety reasons,  ONLY use the adapters 
included in the package.  

2.  On the side of the camera, slide the POWER switch 

   LEFT to the ON position. The 

POWER LED 

will light up.

SETUP

LED Ring

ON / OFF

Switch

10

mylevana.com


background image

SIGNAL STRENGTH

   

NO  

 

           STRONG

SIGNAL   

            SIGNAL

BATTERY STRENGTH

EMPTY   

 

          CHARGING   FULL

VOLUME

  

    

OFF 

 

 

 

   LOUD

PEEP MODE

 ON   

OFF        LOW       MED    SENSITIVE

BRIGHTNESS

DARK 

 

 

         BRIGHT

CAMERA

 

CAM       CAM        CAM       CAM        SEQ

    1           2 

 3             4          MODE

PAIRING

PAIRING      CAM        CAM        CAM        CAM 
                         1 

      2 

      3              4        

SCREEN ICONS

SOUND SENSITIVITY SETTING

  

    

OFF 

  LOW 

 MEDIUM         HIGH

11

mylevana.com

TALK TO BABY™            

SUPPORT  

PTZ

ZOOM            


background image

Turn the MONITOR ON/OFF
Press and hold 

the POWER 

button on top of the monitor to turn the monitor ON. 

Press and hold 

the POWER 

button again to turn OFF the monitor.

Pairing the Camera(s) and Monitor

The camera and monitor come paired (connected) to each other automatically. 

 

However, if upon opening this package the devices do not automatically connect and 
transmit, you may do so manually.

1. 

To pair your camera and monitor, press the MENU   button.  Using the  
navigational arrows 

 on the front of the monitor, highlight the PAIRING icon 

and press the SELECT 

 button once to select.

2. 

Use the navigational arrows 

to highlight the the

 icon.

3. 

Press the SELECT 

 button.  When you see 

flashing next to camera

 icon, 

quickly press and hold the PAIRING 

button on the BOTTOM of the camera. 

A checkmark   will appear next to camera

 confirming pairing is successful. 

Video/audio will be transmitted automatically. 

4. 

To pair additional cameras, repeat steps 1 to 3 and be sure to select camera 
number 

,  

or 

 in the Pairing menu when pairing each additional camera.  

Note:   Before you begin pairing, be sure to have the monitor and the camera(s) 

side by side. 

ICONS ARE ORANGE 
WHEN SELECTED

OPERATION

12

mylevana.com


background image

Placement of the Monitor

This monitor can be placed on a tabletop.

• 

 You can place the monitor on a tabletop by using the retractable table stand on the back of the 
monitor. When not in use, simply tuck the table stand away into the back of the monitor until you 
hear a 

"

click

"

.

Placement of the Camera

This camera can be placed on a tabletop or hung on the wall above the area being monitored. 

• 

 Place the camera within 6 feet of the area being monitored for best picture results. 

• 

 Do not place objects within 2 feet of the field of vision of the camera as 

the night vision will not activate correctly if objects are too close.

Mounting the Camera on a Tabletop Safely:

1.  Place the camera on a tabletop no less than 3 feet away from your 

baby’s crib.

2.  Feed the power cord down the back of the table or use wall clips (not 

included) to secure the cord away so the baby cannot reach it.

3.  Plug in the power cord, check the monitor to ensure that you are getting 

a good view of your child and there are no obstructions.

Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation 
hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times.

OPERATION

13

mylevana.com

3 ft


background image

Mounting the Camera on a Wall Safely:

Before drilling the holes, it is important to check the reception and camera positioning in the intended location on the wall. 

Ensure you are hanging the camera no less than 3 feet away from baby’s crib.

1.  Pre-drill one hole in the wall using a 3/16”, 4.8mm drill bit.

2.  Insert a wall anchor (not included) into the hole and tap gently with a hammer until the anchor is flush with the wall.

3.  Insert a screw (not included) into the wall anchor and tighten until the screw only sticks out about a 1/2 inch.

4.  Plug the power cord into the power input of the camera.

5.  Locate the wall mounting hole on the bottom of the camera base.

6.  Slide the hole over the screw sticking out of the wall.

7.  Confirm that the camera is secure, if it is loose you may have to tighten the 

screws more.

8.  Use wall clips (not included) to secure the power cord away from the crib or the 

baby’s reach. 

9.  Connect the other end of the adapter into an available wall outlet.

Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation 
hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times.

14

mylevana.com

OPERATION


background image

Night Vision

The camera is equipped with 

NEW

 

Invisible IR (infrared) 

LEDs which keep the nursery dark. The LEDs are located 

on the front of the camera and allow you to see up to 12 feet in complete darkness so you can check on your baby 
at any time of night. The night vision LEDs will activate automatically when the 

Light Sensor

 on the side of the 

camera detects that the light levels are too low.

Adjusting the Camera Angle - PTZ

The camera is equipped with Pan / Tilt / Zoom (PTZ). You can adjust the angle 270° 
degrees horizontal and 110° degrees vertical from the center position. 

1.  Press the 

 button on the front of the monitor. 

2.  Using the NAVIGATIONAL KEYS, move the camera to the desired position. 

3.  When set, press the 

 button again.

Using the ZOOM Function

In

 LIVE VIEW 

mode, press the SELECT 

 button.  To return to normal view, press the SELECT 

 button 

again.

NAVIGATIONAL 

KEYS

15

mylevana.com

OPERATION


background image

Volume

Use the navigational arrows 

 to increase /decrease /mute the VOLUME. 

• 

Press the   button to INCREASE the volume in LIVE VIEW; the VOLUME icon will 

display the volume level in the top left corner of the screen.

• 

Press the   button to DECREASE the volume; to MUTE, decrease the volume until 

the 

icon appears in the top left corner of the screen.

Using the Talk to Baby™ Two-Way Intercom 

With the simple press of a button you can talk to your child at any time without entering 
the nursery. 

1.  To talk, press and hold the   button on the front of the monitor and release to listen.
2.  To talk when using multiple cameras, select the camera in the MENU and press the   

button, release to listen.

Setting a lullaby

Choose from three different lullabies to soothe your baby to sleep. 

1. 

To select a lullaby, press the MENU   button.  Using the  navigational arrows 

 on 

the front of the monitor, highlight the LULLABY icon.

2. 

Use the 

 to toggle to select the LULLABY icon of your choice and press the 

SELECT 

 button once to select. 

3. 

To turn OFF the lullabies, select the 

  and press the 

 button once to select. 

Note: Placing the monitor and camera too close together will create feedback. 
DECREASE or MUTE the volume and move the camera away from the monitor.

16

mylevana.com

OPERATION


background image

Setting the lullaby volume

Control the lullaby volume with a choice of three volume settings. 

1. 

Select a lullaby, the volume icon 

 will appear to the right of the lullaby selected. 

Press the SELECT 

 button.  The default volume setting is 

.

2. 

Use the  navigational arrows 

 on the front of the monitor to increase 

 / 

decrease 

 the volume. 

3. 

To return to continuous live view, press the MENU   button. 

Using PEEP Mode

When in

 PEEP Mode

, the monitor enters standby/sleep mode after 1 minute of inactivity. 

When sound is detected, the screen changes to live view. There are 3 levels of sensitivity: 
Low 

, Medium 

 and Sensitive 

.

• 

To access live view manually when the screen is off, press the POWER

button ONCE.

•  PEEP Mode 

extends the battery life over 48 hours. 

1. 

To set 

PEEP Mode

, press the MENU   button.  Using the  navigational arrows 

 on 

the front of the monitor, highlight one of the 

PEEP Mode

 icons. 

2. 

Use the 

 to toggle to the sensitivity icon of your choice and press the SELECT 

 button once to select. 

3. 

To return to continuous live view, press the MENU   button. 

_

4. 

To turn off  

PEEP Mode

, follow step 1 and select 

.

17

mylevana.com

OPERATION


background image

Changing the Camera View

1. 

To change the camera view, press the MENU   button.  Using the  navigational 
arrows 

 on the front of the monitor, highlight the CAMERA icon. 

2. 

Use the 

 to toggle to select the CAMERA icon of your choice and press the 

SELECT 

 button once to select. 

3. 

Select 

to cycle though cameras 1 through 4 and press the SELECT 

 button 

once to select.  

4. 

To return to continuous live view, press the MENU   button.

Sound Sensitivity Settings

Sensitivity Mode

 allows you to adjust the sensitivity of the sound the that the camera 

picks up.

1. 

To set the 

Sensitivity Mode

, press the MENU   button.  Using the  navigational 

arrows 

 on the front of the monitor, highlight the SENSITIVITY icon. 

2. 

Use the 

 to toggle to the your desired sensiticity and press the SELECT 

 

button once to select. 

3. 

The 

LED Ring 

on the front of the monitor also indicates how loud the sound in the 

room is.

SOUND SENSITIVITY SETTING

  

    

OFF 

  LOW 

 MEDIUM         HIGH

SOUND SENSITIVITY SETTING

  

LOW   

MEDIUM         HIGH

18

mylevana.com

OPERATION


background image

Setting the Brightness

Brightness Mode

 sets the brightness of the the screen. 

Brightness Mode 

also extends the 

battery life. 

1. 

To set the 

Brightness Mode

, press the MENU   button.  Using the  navigational 

arrows 

 on the front of the monitor, highlight the BRIGHTNESS icon. 

2. 

Use the 

 to toggle to the your desired brightness and press the SELECT 

 

button once to select. 

Contacting Customer Support

Customer Support 

is just a click away whenever you need it! Our customer support team 

can be reached by live web chat or on our website at www.mylevana.com/support. Our 
experts will be happy to assist you in English, French and Spanish.

1. 

To access 

Customer Support

, press the MENU   button.  Using the  navigational 

arrows 

 on the front of the monitor, highlight the SUPPORT 

 icon press the 

SELECT 

 button once to select. 

2. 

This will take you to the screen which displays our 

Customer Support

 information. 

Press the MENU   button once to EXIT the 

Customer Support

 screen.

Support: www.mylevana.com/support
Web: www.mylevana.com
Online Live Web Chat: www.mylevana.com

19

mylevana.com

OPERATION


background image

ISSUE

POSSIBLE SOLUTION

Equipment does not function

• 

Confirm that the camera and monitor are ON

• 

The battery may be depleted; charge battery

• 

The power adapters may not be properly connected

No reception

• 

Camera and monitor may not be properly paired; follow PAIRING instructions

• 

Camera may be too far away from the monitor

• 

Extend the antenna on the monitor

Reception Interference (static)

• 

The camera and monitor may be too far apart

• 

The battery power may be too low

• 

Other electronic devices may be interfering with the signal

• 

The camera or monitor may be placed too close to many metal objects

Feedback (screeching, static)

• 

The camera and monitor may be too close together

• 

The volume on the monitor may be set too high

Noise (static, beeping)

• 

Battery power may be too low

The buttons are not working

• 

LOCK/UNLOCK Button is in LOCKED position; move to UNLOCK position

Picture works but there is no sound

• 

Volume setting may be too low 

Picture is black and white

• 

Night vision LEDs may be ON; increase the amount of light in the room being monitored

The rechargeable battery will  not charge • 

The power adapters may not be properly connected

• 

Battery pack may not be properly connected inside the battery compartment

• 

The monitor may not be properly docked (if charging using dock)

Maintenance

• 

Clean the surfaces of the camera and monitor with a soft, fluff-free cloth

• 

If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allow water into any openings

• 

Never use cleaning agents or solvents

TROUBLESHOOTING

20

mylevana.com


background image

MONITOR

MONITOR

Monitor Type

TFT LCD

Talk to Baby

Yes

Screen Size

4.3"

Lullabies

Yes

Resolution

480 x 272

Battery Type

Li-Ion

Frame Rate

12 FPS

Battery Capacity

3.7V 1700mAh 6.290Wh

LCD Brightness

Adjustable: 0,1,2,3,4

Battery Connection

Charging Contact

Frequency

2.4GHz

Battery Life (video + audio on)

8 hours

Private Signal

Yes

Battery Life (LCD off)

10 hours

Technology

Digital FHSS

Battery Life (PEEP Mode)

Up to 36 hours

No. of hop/sec

300

Battery Low - Visual Warning

Yes

No. of hopping channels

19

Battery Low - Audible Warning

Yes

Channel bandwidth

3.375 MHz

PEEP Mode (Power Save):

Yes

Data Rate

3 Mbps

Volume Indicator LED

Yes

Transmission Power

+19 dBm

Key Lock 

Yes

Max Transmission Range

750 feet

Housing Material

ABS Plastic

Optimum Transmission Range

200 feet

Power Adapter Input

100~240VAC

Expandable

Up to 4 Cameras

Power Adapter

5.9V 1A DC

Zoom

2x

Limited charge voltage

4.2V

Scan View

Yes, 8 seconds/camera

Operating Temperature

0 to 50 Degrees Celsius

Speaker

Yes

Dimensions

6” x 3.5” x ¾”

Microphone

Yes

Weight

0.5 lbs

21

mylevana.com

SPECIFICATIONS


background image

CAMERA

CAMERA

Image sensor

CMOS

Housing Material

ABS Plastic

Resolution

640 x 480

Wall Mountable

Yes

Viewing Angle

50 Degree

Power Adapter Input

100~240VAC, 50/60Hz 150mA

Focal Length

2.8mm

Power Adapter

5.9V 1A DC

Optimal Focal Distance

2-10 feet

Operating Temperature

0 to 50 Degrees Celsius

PTZ

Yes

Dimensions

3.5” x 4 ¾” x 3.5”

Range of Motion - Horizontal

270 Degrees

Weight

0.65 lbs

Range of Motion - Vertical

110 Degrees

Frequency

2.4GHz

FCC

Private Signal

Yes

FCC ID: SMH-30018BU

Technology

Digital FHSS

FCC ID: SMH-30018PU

Max Transmission Range

750 feet

Optimum Transmission Range

200 feet

IC

Number of IR LEDs

8

IC: 4593A-30018BU

IR Wavelength

940nm

IC: 4593A-30018PU

Night Vision Distance

12 feet

Battery Operable

No

Microphone

Yes

Speaker

Yes

22

mylevana.com

SPECIFICATIONS


background image

24

POWER

Adapter: BLJ5W059100P—U ; Input: 100– 240VAC 50/60Hz 150mA; Output: 5.9V,1000mA;

WARNING

1.  Use only with provided power supply;
2.  The socket-outlet shall be installed near the equipment and shall be easily accessible;

Battery: Model: 464854P, Li-ion battery, 3.7V 1700mAh 6.290Wh, Limited charge voltage: 4.2V.
OR
Battery: Model: 495255AR; Li-ion battery, 3.7V 1700mAh 6.290Wh, Limited charge voltage: 4.2V.
OR
Battery: Model: 495255; Li-ion battery, 3.7V 1700mAh 6.290Wh, Limited charge voltage: 4.2V.

WARNING

Dispose of used batteries according to the instructions ;
Use Only Batteries/Power Supplies Listed in the user Instructions.
Risk of explosion if battery is replaced by an incorrect type;