PDF User Manual

  1. Home
  2. Manuals
  3. Levana Babyview20 User Manual

Levana Babyview20 User Manual

Made by: Levana
Type: User Manual
Category: Baby Monitor
Pages: 18
Size: 0.86 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

USeR MANUAL

www.myLevana.com

Model #: BABYVIEW20

Digital Wireless

Video Baby Monitor

with Night Light Lullaby Camera

 


background image

PRODUCT WARRANTY INFORMATION

Please visit our web site at www.MyLevana.com

for information about your product’s warranty.

 

We take quality very seriously. This is why all of our products come with a one year warranty from the original 

purchase date against defects in workmanship and materials. If you have warranty or support issues please 

contact us using any of the following methods:

 

Support:   www.mylevana.com/contact   

LEVANA Canada 

LEVANA USA

Web site:   www.myLevana.com 

  4080 Montrose Road 

60 Industrial Parkway #Z64

 

   

  Niagara Falls, ON 

Cheektowaga NY 

 

 

  Canada, L2H 1J9 

USA 14227

 Warranty Terms

1.  LEVANA products are guaranteed for a period of one year from the date of purchase against defects in  

workmanship and materials. This warranty is limited to the repair,  replacement or refund of the purchase  

price at LEVANA’s option. 

2.  This warranty becomes void if the product shows evidence of having been misused, mishandled or 

tampered with contrary to the applicable instruction manual. 

3.  Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this 

warranty. 

4.  The warranty expressly provided for herein is the sole warranty provided in connection with the product 

itself and no other  warranty,  expressed or implied is provided. LEVANA assumes no responsibilities for any 

other claims not specifically mentioned in this warranty. 

5.  This warranty does not cover the shipping cost, insurance or any other incidental charges. 
6.  You MUST contact LEVANA before sending any product back for repair. You will be sent a Return 

Authorization form with return instructions. When returning the product for warranty service, please pack 

it carefully in the original box with all supplied accessories, and enclose your original receipt or copy, and a 

brief explanation of the problem (include RA #). 

7.  This warranty is valid only in Canada and the continental U.S.
8.  This warranty cannot be re-issued.

 


background image

Video Baby Monitor

w/ Night Light Lullaby Camera

Congratulations! You’ve just taken a 

step to help ensure your child’s safety 

and enjoy more of your child’s special 

moments. Please take a few minutes 

to read this manual so you can use 

this monitor to its full potential. If you 

have any questions on your product, 

please visit www.MyLevana.com for 

troubleshooting information.

TABLE OF CONTENTS

TABLE OF CONTENTS .................................................................................i

FCC STATEMENT .........................................................................................ii

CARE AND MAINTENANCE .......................................................................ii

SAFETY INSTRUCTIONS  .............................................................................iii 

WHAT’S INCLUDED  ...................................................................................iv

KNOWING YOUR BABY MONITOR .............................................................1

CAMERA SETUP .........................................................................................2

Mounting The Camera ..........................................................................3

Using The Night Light ............................................................................4

Night Vision .........................................................................................4

MONITOR SETUP ........................................................................................4

Adjusting The Monitor Brightness ...........................................................7 

Sound Activation (VOX)  .......................................................................7

Lullaby Sounds .....................................................................................8

RANGE............. .........................................................................................9

 TROUBLESHOOTING ...................................................................................10

ADDITIONAL INFORMATION ......................................................................10

LITHIUM BATTERY TIPS .................................................................................11

INTRODUCTION

i

 


background image

•  Do not store in very cold areas. When the system warms up (to its 

normal temperature), moisture can form inside the case, which may 

damage electronic circuit boards.

•  Do not attempt to open the case. Non-expert handling of the internal 

components may damage the system.

•  Avoid dropping or strong shocks.

•  Operate this product using only the power supply included or provided 

as an accessory.

•  Do not overload electrical outlets or extension cords this can result in 

fire or electric shocks.

GENERAL CARE AND MAINTENANCE

ii

FCC STATEMENT

This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses 

and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna

•  Increase the separation between the equipment and receiver

•  Connect the equipment into an outlet on a circuit different from that to which the receiver 

is connected

•  Consult the dealer or an experienced radio/TV technician for help

•  FCC Label Compliance Statement:

•  This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: 

(1) This device may not cause harmful interference

(2) This device must accept any interference received, including interference that 

may cause undesired operation

The manufacturer is not responsible for any radio or TV interference caused by unauthorized 

modifications to this equipment. Such modifications could void the user's authority to operate 

the equipment.

CARE AND MAINTENANCE

 


background image

SAFETY INSTRUCTIONS

 

Read and Keep Instructions:

 All the safety and operating instructions should be 

read before the video baby monitor is operated.

This product cannot replace responsible adult supervision.

Strangulation Hazard:

 Children can become entangled in cords. Power cords 

should be kept more than 3 feet away from the crib and baby’s reach at all 

times. Baby monitors with power cords should never be hung on or near the crib. 

Water and Moisture:

 This product is designed for indoor use only. The unit 

should not be exposed to rain, moisture, dripping or splashing. No objects filled 

with liquid should be placed on top of, or beside the product, such as a glass or 

vase.  This item should not be used near water.

Non-Use Periods:

 Always unplug the AC adapters from the wall outlets during 

long periods of non-use.

Ventilation:

 This baby monitor should not be used on a bed, sofa, rug or similar 

surface that may block the ventilation openings, or be placed in an enclosed 

area, such as a bookcase or drawer that may impede air flow.

Keep Away from Sources of Heat:

 This unit should not be exposed to direct 

heat sources such as a candle, fireplace, radiator, heat register, stove or other 

appliance that emits heat. The unit should not be left in direct sunlight.

Power Source:

 This unit should only be used with the AC power adapters 

included in this package (rated 6V 800mA)

Damage Requiring Service:

 This unit should be serviced by qualified personnel 

only when:

a.  Objects have fallen or liquid has been spilled into the product

b.  The units have been exposed to rain

c. The units do not appear to operate normally or exhibits a distinct change in 

performance

d.  The units have been dropped or the enclosure damaged

Caution: This product cannot replace responsible adult supervision of a child. 

iii

 


background image

WHAT’S INCLUDED

 

•  Wireless Monitor 

•  Wireless Camera  

•  Rechargeable Lithium-ion Battery 

 

•  2 Power Adapters

 

 

Your BABYVIEW20 uses digital transmission to ensure a clear and consistent 

picture. The signal also passes easily through interior walls. However, 

buildings with metal frames or placing the camera near large metal objects 

may cause signal degradation. If reception is poor, moving the camera or 

receiver may fix this problem.

 

•  Magnetic Base for Camera 

•  Instruction Manual 

•  1 Year Warranty 

•  Lifetime Live Customer Support 

 

AVOIDING SIGNAL DISRUPTION

STATEMENT ON REGULATION

These units are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses and 

can radiate radio frequency energy and if not installed and used in accordance 

with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or more of the 

following measures:

• 

Reorient or relocate the receiving antenna

• 

Increase the separation between the equipment and receiver

• 

Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected

• 

Consult the dealer or an experienced radio/TV technician for help

Operation with non-approved equipment or unshielded cables is likely to result 

in interference to radio or TV reception. The user is cautioned that changes and 

modifications made to the equipment without the approval of manufacturer could 

void the user’s authority to operate this equipment.

SAFETY INSTRUCTIONS

 

iv

 


background image

KNOWING YOUR BABY MONITOR

Monitor:

1. 

LCD screen

2. 

Antenna

3. 

Music selection buttons

4. 

VOX: Voice Operated  

Transmission button

5. 

Power indicator LED

6. 

Link indicator LED

7. 

Volume indicator LED

8. 

Speaker

9. 

VOX (Voice Operated 

Transmission) 

 

indicator LED

10.  Music indicator LED

11.  Brightness adjustment 

buttons

12.  Power/Volume control

13.  Power adapter jack

14.  Battery compartment

15.  Belt Clip/Stand

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Camera:

1. 

Antenna

2. 

Power indicator LED

3. 

Infrared LEDs

4. 

Lens

5. 

Magnetic Base

6. 

Night Light

7. 

Night Light button

8. 

Microphone

9. 

Speaker

10.  Battery compartment 

11.  Power ON/OFF switch

12.  Power adapter jack

1

2

3

4

5

6

7

8

9

10

11

12

1

 


background image

CAMERA SETUP

You can use the supplied AC adapter or 4 AAA-batteries (not included) 

to power your camera. Before starting, switch the power to the OFF 

position.

If using batteries:

Note: Use new batteries. Do not mix old batteries with new ones. Remove 

the batteries from the camera if you do not plan to use it for an extended 

period of time.

1. Use a flat-head screwdriver, open the battery compartment cover 

on the back of the camera.

2. Insert 4 AAA batteries according to the "+" and "-" signs. Close the 

battery compartment cover and tighten the screw to hold it in place.

3. Slide the POWER switch to the ON position. The LED on the front of 

the camera will light up red.

•  The LED on the camera will remain red until the batteries lose 

power. Change the batteries when the LEDs are red and blinking. 

Upon startup, the LED will be red. 

CAMERA SETUP

2

NOTE:

 Batteries in the camera will last a maximum of 4.5 continuous 

hours. For best results, use Lithium Ion AAA batteries. 

 

Use batteries only when necessary.

 


background image

1

2

3

If plugging into a wall outlet:

1. 

Plug one end of the provided power adapter into a wall outlet.

(Camera and monitor power adapters are interchangeable.)

2. Connect the other end of the power adapter into the power input on 

the camera. This is located under the ON/OFF switch.

3. Turn the ON/OFF switch to the ON position. The LED on the camera 

will light up RED. 

 

Mounting the Camera 

Using the Magnetic Base 

The camera has an innovative and convenient 

magnetic base that magnetically holds the 

camera securely. This allows you to freely rotate 

the camera left, right, up and down with ease:

1.  Place the camera & magnetic base on a flat 

surface at least 3 feet away from your 

  baby’s crib.

2.  Rotate the camera freely and aim it in the 

direction you would like to monitor. Avoid 

placing at an angle over 30 degrees as the 

camera may fall out. The magnetic strength 

is lower over the battery compartment.

CAMERA SETUP

3

 


background image

Using the Night Light

•  Press the LIGHT button. This will turn ON/OFF the night light stars. 

The night light will remain on until the button is pressed again.

CAMERA SETUP

4

Using Night Vision

The camera has nine night vision LEDs allowing you to view your 

baby in the dark.The camera has a light sensor and will activate the 

night vision only when it gets dark. When you turn off the lights, you 

will notice a faint red glow in the front of the camera; these are the 

LEDs lit up. 

MONITOR SETUP 

You have the option to use either the supplied AC adapter or the 

included rechargeable lithium-ion battery to power the monitor.

NOTE:  We do not recommend 

using batteries with the 

night light. The battery 

life will be less than 

2.5 hours with the 

night light on.

3

1

2

 


background image

If using the included rechargeable battery: 

1.  Turn the monitor 

OFF

.

2.  Rotate the clip on the back of the monitor to an upright position.

3.  Slide open the battery compartment cover on the back of the 

monitor. Insert the battery with its connections matching the 

connections in the monitor.

4.  Close the battery compartment cover, and make sure it is 

locked securely.

5.  Your battery will need to be charged for initial use. Plug the AC 

adapter into a wall outlet, and the other end into the monitor (both 

camera and monitor power adapters are interchangeable).

6.  If the monitor is 

OFF

 the power LED will turn BLUE to indicate that 

charging is in progress. If the monitor is 

ON

 and charging, the 

power LED will be purple. 

7.  The power LED will turn 

OFF

 when charging is complete. Charging 

time is approximately 3 hours.

8.  When charging is complete, unplug the monitor from the AC 

adapter. Turn

 ON

 the monitor by turning the volume knob on the 

side of the unit. You will feel a slight click when it turns on.

9.  When the monitor is on, the 

POWER LED

 on the monitor will light 

up RED. The POWER LED will blink when the battery needs to 

  be charged. Follow the above steps to recharge the battery.

MONITOR SETUP

5

1

2

3

 


background image

MONITOR SETUP 

If using with AC adapter:

1. Plug one end of the provided power adapter into a wall outlet (both 

camera and monitor power adapters are interchangeable).

2. Connect the other end of the power adapter into the power input on 

the monitor.

3. Turn on the monitor by turning the volume knob on the side of the 

unit. You will feel a slight click when it turns on.

4. When the monitor is on, the POWER LED on the monitor will light 

up RED.

6

Note:

 It takes approximately 3 hours to fully charge your monitor battery. 

Note:

 The battery does not need to be inserted to operate the monitor 

from a wall outlet. However, keeping the battery in the unit will 

ensure that it is charged when you need to unplug it from 

 

the wall.

 


background image

Adjusting Monitor Brightness

1. If the image on the LCD screen is too bright , press the    button 

(lower button) to darken the screen.

2. If the image on the LCD screen is too dark, press the    button 

(higher button) to brighten the screen.

Sound Activation (VOX)

The BABYVIEW20 system lets you turn off the monitor while you are 

sleeping, and will automatically turn back on if your child starts to cry 

or make noise.

1. Press the “VOX” button on the left side of the monitor. This will turn 

off the screen but the “VOX” LED on the front of the monitor will 

  glow blue.

2. When the sound from the camera reaches the set level, the screen will 

turn on automatically. It will turn off again after 30 seconds.

MONITOR SETUP 

7

NOTE:

 The preset noise level is preset to a level comparable to a casual conversation. 

 


background image

Lullaby Sounds

The camera plays a selection of lullabies that you can control with the 

monitor. With a push of a button you can start playing music, change 

the song, and stop the music remotely when your baby is asleep. There 

are 3 different chiming melodies that can sooth your baby to sleep. 
1. Press the play button  

  on the top left hand side of the monitor. 

This will activate the music on the camera. If you turn up the volume 

on your monitor you will hear it. The music note LED on the front of  

the monitor will glow RED when a lullaby is turned on.

2. Press the play button  

  again and the music will stop.

3. Press the next button  

 to skip to a different song. 

•  You can see the music you choose on the LCD screen, the music you 

have to choose from includes: 

1.  Twinkle Twinkle little star

2.  Hush a Bye 

3.  Rock-a-bye Baby  

MONITOR SETUP 

8

 


background image

SYNCING CAMERA AND MONITOR 

The monitor`s range is approximately 100 

feet (30 meters); 150 feet (46 meters) in a 

clear line of sight from the camera. Many 

factors may increase or decrease the maxi-

mum wireless range. The “link” LED will be 

green when the monitor and camera are 

paired and red when they are not paired. 

• 

If the signal is lost between the monitor 

and the camera the message “OUT OF 

RANGE” will appear on the monitor. This 

could be caused by the camera having 

no power or the distance between the 

camera and monitor being too far. Try 

moving the camera and monitor closer 

together, if this does not fix the issue, try 

syncing the monitor and camera. Syncing 

the monitor and camera may also 

improve the audio quality. 

  To sync the monitor and camera: 

1. With both units powered on, press the 

VOX button on the monitor and the 

night light button on the camera at the 

same time. Hold both buttons down for 

approximately 5 seconds.

2. The words “Signal Searching” will 

appear on the monitor.

3. Once the night lights (stars) on the 

camera blink three times the camera 

and monitor will been synced and you 

can properly view your camera on your 

handheld monitor. 

SIGNAL SEARCHING

RANGE

9

 


background image

If you are not getting any signal at all:

•  Make sure the camera and the monitor are turned on

•  Make sure the power plugs are pushed all the way in

•  If the camera/monitor is powered by batteries, replace all batteries 

with new ones

If the signal is poor, or there is interference:

•  If there is a microwave oven in use in the path between the camera 

and monitor, turn off the microwave

•  Make sure the camera and the monitor are within range of each 

other (optimal range of approximately 100 ft; 150 ft in a clear line 

  of sight)

•  Keep all parts and accessories out of young children’s reach

•  Fingerprints or dirt on the lens surface can adversely affect camera 

performances. Avoid touching the lens surface with your fingers

•  Should the lens become dirty, use a blower to blow off dirt and dust, 

or a soft, dry cloth to wipe off the lens

•  Keep the camera dry. Precipitation, humidity, and other liquids 

contain minerals which will corrode electronic circuits

•  Do not use or store in dusty, dirty areas

•  Do not store in hot areas. High temperatures can shorten the life of 

electronic devices and warp or melt certain plastics

•  If the power LED is on but only voice signal input is detected, the 

monitor may be in voice-activated mode. Press the VOX button OFF 

to turn on the screen

•  The VOX LED should be off to indicate the unit is in normal operation 

mode. If this does not work try to sync the camera and monitor again

TROUBLESHOOTING

ADDITIONAL INFORMATION

10

 


background image

The rechargeable battery of the handheld monitor is a built-in lithium-

polymer battery. Before using the monitor with battery power, please read 

the following in order to use the battery properly.

1.  Under normal temperatures the battery can be recharged at least 

300 times. 

2.  If the battery is not already full, make sure that the battery is 

charged before use.

3.  When the device is not in use, switch the unit off to maintain 

battery power.

4.  Unplug the power adapter when not in use.

5.  In colder environments, the unit will consume more power. Please 

keep this device at room temperature to increase the usable 

power. In environments with low temperatures it will take longer to 

recharge than in normal temperature environments.

6.  To avoid danger, do not use the power adapter in high temperature 

and high humidity locations.

7.  It is normal for the unit’s battery to feel slightly warm while the 

monitor is in use or is charging. Do not leave the power adapter 

connected for an extended period of time.

8.  For your own safety, the battery is set to stop charging when 

the battery temperature is higher than 45°C or lower than 5°C. 

Charging will automatically resume once temperatures are back 

to normal.

9.  In order to avoid damaging the battery, do not expose the monitor 

to high temperature environments (45°C or above).

10.  Even if the battery is fully charged, power will gradually be lost 

if the monitor is not used for an extended period. Make sure to 

recharge if the unit has not been in use for a long period of time.

11.  Always use the supplied power adapter only to recharge the 

monitor’s battery. Using any other power adapter could ruin the 

monitor or cause extreme burns.

LITHIUM BATTERY TIPS

11

 


background image