PDF User Manual

  1. Home
  2. Manuals
  3. Lesro Avon Connecting Center Table Assembly Instructions Manual

Lesro Avon Connecting Center Table Assembly Instructions Manual

Made by: Lesro
Type: Assembly Instructions
Category: Indoor Furnishing
Pages: 2
Size: 0.81 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

Tools required:

   Phillips screwdriver, Allen wrench (included in hardware pack).

Note:

  These instructions are intended for various models and configurations.  Your products may not 

look exactly as those shown in the diagrams.

Important

:

  The assembly process requires that some hardware be kept loose until later in the 

sequence.  Follow these instructions closely to ensure correct assembly.

Recommendation:

  

Retighten all bolts on a seasonal basis to ensure your product remains strong 

and stable for many years of use.

Weight Capacity:

  These tables are not intended for use as seats.

Thank you for purchasing a Lesro product.

Need assistance with assembly?  Call Lesro customer service 1-800-275-7545.

Visit us online at www.lesro.com

Leaders in Reception Seating

Lesro Industries, Inc.
1 Griffin Road South
Bloomfield, CT
06002

Phone  860.243.3226
Fax       860.243.5392
www.lesro.com

© 2018  Lesro Industries, Inc.

Feb 2018

Assembly Instructions

For Avon Connecting Center Table

Parts List

Tabletop

Connecting Brackets, Front, 2 pcs.

Connecting Brackets, Back, 2 pcs.

⅝” Phillips Screws, 16 pcs.

Allen Wrench

1.  Unpack and identify all parts.  
2.  Assemble chairs individually according 

to chair instructions before attaching 

connecting table.

3.  Position chairs about 2 feet apart.
4.  Use an Allen wrench to loosen the seat 

cushion bolts about 1/2” on facing sides 

of both chairs, as shown in figure 1. 

5.  Attach the front and back brackets to 

both chairs. With bolt inserted fully into 

slot, as shown in figure 2, retighten bolts 

securely.

6.  Pull the chairs together and rest the 

tabletop on the brackets, as shown in 

figure 3. Sticker on underside of tabletop 

faces back.  (22 ¼” edge goes in front.  

23 ¼” edge goes in back.)

7.  Attach tabletop to brackets using Phillips 

screws into pre-drilled holes, as shown 

in figure 4. Once all 8 screws are started, 

tighten securely, using care not to strip. 

8.  With both chairs resting on a level floor, 

carefully align the back legs so they form 

a straight line, as shown in figure 5.  

9.  Insert Phillips screws through brackets 

into bottom of seat cushions and tighten 

securely, using care not to strip.

10. Your product is now assembled and 

ready to use.

Fig 1

Fig 3

Loosen 

seat bolts 

about 

1/2” to 

attach 

brackets

Be sure legs are in a straight 

line before inserting Phillips 

screws into bottom of seats.

Fig 4

Fig 5

Closeup View

Seat 

screws

Table 

screws 

Front bracket

Back bracket

Fig 2

Bolt should 

be inserted 

fully into slot

Phillips 

screws 

into seats

Phillips 

screws 

into table

 


background image

Tools required:

   Phillips screwdriver, Allen wrench (included in hardware pack).

Note:

  These instructions are intended for various models and configurations.  Your products may not 

look exactly as those shown in the diagrams.

Important

:

  The assembly process requires that some hardware be kept loose until later in the 

sequence.  Follow these instructions closely to ensure correct assembly.

Recommendation:

  

Retighten all bolts on a seasonal basis to ensure your product remains strong 

and stable for many years of use.

Weight Capacity:

  These tables are not intended for use as seats.

Thank you for purchasing a Lesro product.

Need assistance with assembly?  Call Lesro customer service 1-800-275-7545.

Visit us online at www.lesro.com

Leaders in Reception Seating

Lesro Industries, Inc.
1 Griffin Road South
Bloomfield, CT
06002

Phone  860.243.3226
Fax       860.243.5392
www.lesro.com

© 2018  Lesro Industries, Inc.

Feb 2018

Assembly Instructions

For Avon Connecting Corner Table

Parts List

Tabletop

Connecting Brackets, Front, 2 pcs.

Connecting Brackets, Back, 2 pcs.

Table Leg

⅝” Phillips Screws, 18 pcs.

Allen Wrench

1.  Unpack and identify all parts.  
2.  Assemble chairs individually according to 

chair instructions before attaching connecting 

table.

3.  Position chairs about 2 feet apart.
4.  Use an Allen wrench to loosen the seat 

cushion bolts about 1/2” on facing sides of 

both chairs, as shown in figure 1. 

5.  Attach the front and back brackets to both 

chairs. With bolt inserted fully into slot, as 

shown in figure 2, retighten bolts securely.

6.  Place the tabletop upside down on a soft, 

clean surface to prevent scratching.

7.  Attach table leg to tabletop using Phillips 

screws into pre-drilled holes, as shown in 

figure 3.  Tighten screws securely using care 

not to strip.

8.  Pull the chairs together and rest the tabletop 

on the brackets, as shown in figure 4.

9.  Attach tabletop to brackets using Phillips 

screws into pre-drilled holes, as shown in 

figure 5. Once all 8 screws are started, tighten 

securely, using care not to strip. 

10.  After checking that chairs are square to 

one another, insert Phillips screws through 

brackets into bottom of seat cushions as 

shown in figure 6.  Tighten securely, using 

care not to strip.

11.  Your connecting corner table is now 

assembled and ready to use.

Fig 1

Fig 4

Loosen 

seat bolts 

about 

1/2” to 

attach 

brackets

Fig 6

Closeup View

Seat 

screws

Table 

screws 

Front bracket

Back bracket

Fig 2

Bolt should 

be inserted 

fully into slot

Phillips screws into seats

Fig 3

Fig 5

Phillips screws into table

Phillips 

screws