Full Text Searchable PDF User Manual
27
ENGLISH
HOW TO USE
Operating the Dryer
TURN ON THE DRYER
Press the POWER button to turn on the dryer. The cycle LEDs will illuminate
and a signal will sound, if turned on. Refer to page 10.
3
BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. The cycle can be paused at
any time either by opening the door or by pressing the START/PAUSE button. If
the cycle is not restarted within 4 minutes, the dryer will shut off and the cycle
settings will be lost.
5
SELECT A CYCLE
Turn the cycle selector knob either direction until the LED for the desired cycle
is on. The preset temperature, dry level, and option settings for that cycle will
be shown. Refer to page 28. Default settings for the selected cycle can now be
changed if desired. This can be done using the cycle modifier buttons as shown
on page 30. Cycle options can be added using the option buttons as shown on
page 30-32.
4
NOTE
Not all options or modifiers are available on all cycles. A different chime will
sound and the LED will not come on if the selection is not allowed.
END OF CYCLE
When the cycle is finished, the chime will sound if it is set. Remove your
clothing from the dryer immediately to reduce wrinkling. If WRINKLE CARE
is selected, the dryer will tumble briefly every few minutes to help prevent
wrinkles from setting in the clothes.
6
LOAD THE DRYER
Load the dryer with the wet laundry from the washer. If the load is extra large,
you may need to divide it into smaller loads for proper performance and fabric
care.
2
CLEAN THE LINT FILTER
If the lint filter has not already been cleaned, lift out the filter and remove the
lint from the last load. This will help ensure the fastest and most efficient drying
performance.
1
hOW TO uSE
Lint
Filter
2014.8.18 9:37:7 AM
28
NOTE
To protect your garments not every dryness level,
temperature, or option is available with every cycle.
See the
Cycle Guide
for details.
hOW TO uSE
Cycle Guide
sensor dry cycles
Sensor dry cycles utilize LG’s unique dual sensor
system to detect and compare the moisture level
in clothes and in the air and adjust the drying time
as needed to ensure superior results. The dryer
automatically sets the dryness level and temperature
at the recommended setting for each cycle. The
estimated time remaining will be shown in the display.
manual dry cycles
Use manual dry cycles to select a specific amount of
drying time and a drying temperature. When a manual
dry cycle is selected, the Estimated Time Remainng
display shows the actual time remaining in your cycle.
You can change the actual time in the cycle by pressing
More Time or Less Time.
Cycle
Fabric Type
Dry
Level
Temperature
Time
in Min.
More
Time/
Less
Time
Wrinkle
Care
Damp
Dry
Signal
Reduce
Static
Easy
Iron
Energy
Saver
Steam
Fresh
TM
Comforter, shirts,
trouser (except
especially delicate
fabrics)
OFF
MID HIGH
20
ADjUSTABLE ADjUSTABLE
Steam
Sanitary
TM
Comforter, bedding,
children’ clothing
OFF
HIGH
39
Anti
Bacterial
Do not use this cycle
with delicate fabrics.
VERY
HIGH
70
Bulky/
Large
Comforters, pillows,
shirt
NORMAL
MEDIUM
55
ADjUSTABLE
Perm.
Press
Permanent press,
synthetic items
NORMAL
LOW
32
ADjUSTABLE
Cotton/
Normal
Work clothes,
corduroys, etc.
NORMAL
MEDIUM
Elec. : 67
Gas : 76
ADjUSTABLE
Delicates Lingerie, sheets,
blouses
NORMAL
LOW
28
ADjUSTABLE
Speed
Dry
For small loads with
short drying times
OFF
HIGH
25
ADjUSTABLE ADjUSTABLE
Air Dry
For items that
require heat-free
drying such as
plastics or foam
filled items
OFF
NO HEAT
30
ADjUSTABLE
NOTE
The Energy Saver is default option in the Cotton/
Normal Cycle.
If you want faster drying than Cotton/Normal default
setting, you can turn off the Energy Saver option.
2014.8.18 9:37:8 AM
29
ENGLISH
Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for
more detailed information.
Check the lint filter before every
load
Always make sure the lint filter is clean before starting a
new load; a clogged lint filter will increase drying times.
To clean, pull the lint filter straight up and roll any lint
off the filter with your fingers. Do not rinse or wash the
filter to remove lint. Push the lint filter firmly back into
place. See
Regular Cleaning
for more information.
Always ensure the lint filter is properly installed before
running the dryer. Running the dryer with a loose or
missing lint filter will damage the dryer and articles in
the dryer.
Sorting Load
fabric care labels
Most articles of clothing feature fabric care labels that
include instructions for proper care.
grouping similar Items
For best results, sort clothes into loads that can be dried
with the same drying cycle.
Different fabrics have different care requirements, and
some fabrics will dry more quickly than others.
Loading the Dryer
w
WArNiNg
To reduce the risk of fire, electric shock, or injury
to persons when using this appliance, follow basic
precautions, including the following:
•
Check all pockets to make sure that they are
empty. Items such as clips, pens, coins, and keys
can damage both your dryer and your clothes.
Flammable objects such as lighters or matches
could ignite, causing a fire.
Failure to do so can result
in fire, explosion, or death.
•
Never dry clothes that have been exposed to oil,
gasoline, or other flammable substances. Washing
clothes will not completely remove oil residues.
Failure to obey this warning can result in fire, explosion,
or death.
NOTE
loading tips
• Combine large and small items in a load.
• Damp clothes will expand as they dry. Do not
overload the dryer; clothes require room to tumble
dry properly.
• Close zippers, hooks, and drawstrings to prevent
these items from snagging or tangling on other
clothes.
Tumble
dry
Dry
Normal
Permanent Press/
wrinkle resistant
Gentle/
delicate
Do not tumble dry
Do not dry
(used with
do not wash)
fabric care labels
Heat
setting
High
Medium
Low
No heat/air
Tumble
dry
Dry
Normal
Permanent Press/
wrinkle resistant
Gentle/
delicate
Do not tumble dry
Do not dry
(used with
do not wash)
hOW TO uSE
Lint
Filter
2014.8.18 9:37:9 AM
30
Cycle modifier buttons
SENSOR DRY cycles have preset settings that are
selected automatically. MANUAL DRY cycles have
default settings, but you may also customize the
settings using the cycle modifier buttons.
Press the button for that option to view and select other
settings.
dry level
Selects the level of dryness for the cycle. Press the Dry
Level button repeatedly to scroll through available
settings.
• This option is only available with SENSOR DRY cycles.
• The dryer will automatically adjust the cycle time.
Selecting More Dry or Very Dry will increase the cycle
time, while Less Dry or Damp Dry will decrease the
cycle time.
• Use a Less Dry or Damp Dry setting for items that you
wish to iron.
temp. control
Adjusts the temperature setting from Ultra Low to High.
This allows precise care of your fabrics and garments.
Press the Temp. Control button repeatedly to scroll
through available settings.
time dry
Allows you to manually select the drying time, from 20
to 60 minutes, in 10-minute increments. Use this for
small loads or to remove wrinkles. Use the More Time/
Less Time buttons to add or reduce the drying time in
1-minute increments.
NOTE
To protect your garments, not every dryness level,
temperature, or option is available with every cycle.
See the Cycle Guide for details.
Your dryer features several additional cycle options to
customize cycles to meet your individual needs. Certain
option buttons also feature a special function (see the
following page for details) that can be activated by
pressing and holding that option button for 3 seconds.
to add cycle options to a cycle:
1. Turn on the dryer and turn the cycle selector knob to
select the desired cycle.
2. Use the cycle settings buttons to adjust the settings
for that cycle.
3. Press the cycle option button(s) for the option you
would like to add. A confirmation message will be
shown in the display.
4. Press the START/PAUSE button to start the cycle. The
dryer will start automatically.
signal
Adjusts the volume of the Signal or turns off the Signal.
Press the button repeatedly until the desired volume
setting is illuminated.
hOW TO uSE
2014.8.18 9:37:10 AM
31
ENGLISH
Special functions
The option buttons also activate special functions,
including Child Lock.
Select the option by pressing the option button. Press
and hold the option button for special features marked
with the asterisk (*), such as Child Lock.
* child lock
Use this option to prevent unwanted use of the dryer
or to keep cycle settings from being changed while the
dryer is operating.
Press and hold the button for 3 seconds to activate or
deactivate the Child Lock function.
The Child Lock icon will be shown in the display, and all
controls are disabled except the POWER button.
damp dry signal
With this option, the dryer will signal when the load
is approximately 80% dry. This allows you to remove
faster- drying lightweight items or items that you would
like to iron or hang while still slightly damp. Press the
Damp Dry Signal button.
Wrinkle care
Selecting this option will tumble the load periodically for
up to 3 hours after the selected cycle, or until the door is
opened. This is helpful in preventing wrinkles when you
are unable to remove items from the dryer immediately.
energy saver
This option helps to reduce the energy consumption in
Cotton/Normal Cycle, depending on the load size.
Drying time will be changed when the Energy Saver is
selected.
NOTE
Once set, Child Lock remains active until it is manually
deactivated. Child Lock must be turned off to run
another cycle.
To deactivate Child Lock, press and hold the button
for three seconds.
hOW TO uSE
NOTE
The Energy Saver is default option in the Cotton/
Normal Cycle.
If you want faster drying than Cotton/Normal default
setting, you can turn off the Energy Saver option.
2014.8.18 9:37:10 AM
32
Custom program
If you have a special combination of settings that you
use frequently, you can save these settings as a CUSTOM
PROGRAM.
to save a custom program:
1. Turn on the dryer and turn the cycle selector knob to
select the desired cycle.
2. Use the cycle setting buttons to adjust the settings for
that cycle.
3. Press the cycle option button(s) for the option you
would like to add. A confirmation message will be
shown in the display.
4. Press and hold the CUSTOM PROGRAM button for 3
seconds.
to recall a custom program:
1. Turn on the dryer.
2. Press the CUSTOM PROGRAM button.
3. Press the START/PAUSE button to start the cycle.
Steam functions
to fill the steam feeder
1. Pull out the drawer.
2. Lift out the steam feeder.
3. Fill the steam feeder just to the filter screen.
4. Place the steam feeder in the drawer; then push in the
drawer until it clicks into place.
w
WArNiNg
•
Do not fill the steam feeder with liquids such as
gasoline, dry-cleaning solvents, or other flammable
or explosive substances.
Failure to follow this warning
can cause serious injury or death.
•
Do not drink water from the steam feeder.
Failure to
follow this warning can cause serious injury or death.
NOTE
You may save only one custom program at a time.
Pressing and holding the CUSTOM PROGRAM button
will overwrite any previously saved custom program.
NOTE
Before using a Steam Cycle, the steam feeder must
be filled with water up to the MAX line. If not, the will
be displayed. Make sure that the steam feeder is filled
with water or the drawer is fully closed. Turn the dryer
off then restart the Steam Cycle.
• Only use Tap Water. Do not fill the steam feeder with
foreign substances, rinse agents, or detergents.
• Before moving the dryer, make sure the steam feeder
is empty.
• Do not use distilled water; the water level sensor in
the steam generator will not work.
• Be careful to put the Steam Feeder otherwise water
will be overflow.
• Wipe up any spilled water around the Steam Feeder
and the drawer before starting the dryer.
• Do not fill the steam feeder with hot water (over
86°F/30°C).
hOW TO uSE
Drawer
Steam
Feeder
Tap Water
ONLY
2014.8.18 9:37:11 AM
33
ENGLISH
Steam functions (cont.)
LG’s new steam technology allows you to inject fabrics
with a swirling jet of hot steam to refresh clothes, reduce
static, and make ironing easier.
Simply select the STEAM FRESH™ cycle, or you can add a
Steam option to selected cycles.
using the steam fresh
tm
cycle
STEAM FRESH™ uses the power of steam alone to quickly
reduce wrinkles and odor in fabrics. It brings new life to
wrinkled clothes that have been stored for an extended
time and makes heavily wrinkled clothes easier to iron.
STEAM FRESH™ can also be used to help reduce odors in
fabrics.
to use the steam fresh
tm
cycle:
1. Turn on the dryer and turn the cycle selector knob to
select the STEAM FRESH ™ cycle.
2. To add an option function, select REDUCE STATIC,
EASY IRON, or WRINKLE CARE.
3. Depending on the load (quantity of items), steam time
can be changed by pressing the MORE TIME or LESS
TIME buttons.
4. Press START/PAUSE button to start the cycle.
to add steam to a standard cycle:
1. Turn on the dryer and turn the cycle selector knob to
select the desired cycle.
2. Use the cycle setting buttons to adjust the settings for
that cycle.
3. Press the Steam option button for the Steam option
you would like to add. Then adjust for the load size
using the MORE TIME or LESS TIME buttons.
4. Press START/PAUSE button to start the cycle.
using the steam options:
The REDUCE STATIC option injects steam late in the
drying cycle to reduce the static electricity caused by
dry fabrics rubbing together. Change the amount of
time for the cycle by pressing the MORE TIME or LESS
TIME button, depending on the load (quantity of items).
The display will show the recommended number of
items, such as 7, 9, 11, 14, 16, or 18.
The EASY IRON option provides uniform, properly
dampened fabrics for ironing, which can save time and
make ironing easier. Change the amount of time for the
cycle by pressing the MORE TIME or LESS TIME button,
depending on the load (quantity of items). The display
will show the recommended number of items, such as 1,
2, 3, 4, or 5.
using the steam san Itary
tm
cycle
New STEAM SANITARY
TM
cycle is ideal for sanitizing non
washable items quickly and easily using the power of
steam alone.
Recommend to use this cycle for cotton and polyester
material. (Do NOT use for urethane foam, down feathers
or delicates items)
NOTE
• REDUCE STATIC or EASY IRON options can also be
used during the STEAM FRESH™ cycle.
• Depending on the load (quantity of items), you may
change the amount of time for the cycle by pressing
the MORE TIME or LESS TIME button. The display will
show 3, 5, or
. 3 means 3 or fewer items, 5 is for
4 or 5 items, and
indicates a large load such as
a comforter.
NOTE
• When Sensor Dry is selected with the REDUCE
STATIC option, a Dry level of Less or DAMP cannot be
selected.
• The REDUCE STATIC or EASY IRON option may also be
selected during TIME DRY cycles.
• After the Steam option is selected in TIME DRY, the
MORE TIME or LESS TIME buttons will change the
steam time ONLY.
• After pressing START/PAUSE, the MORE TIME or LESS
TIME buttons will be disabled.
hOW TO uSE
2014.8.18 9:37:11 AM
34
Steam functions (cont.)
w
WArNiNg
•
Do not open the dryer door during steam cycles.
Failure to follow this warning can cause serious injury
or death.
•
Do not fill the steam feeder with gasoline, dry-
cleaning solvents, or other flammable or explosive
substances.
Failure to do so can result in death,
explosion, fire, or burns.
•
Do not touch the steam nozzle in the drum during
or after the steam cycle.
Failure to follow this warning
can cause serious injury or death.
Steam cycle guide
NOTE
• Steam may not be clearly visible during the steam
cycles. This is normal.
• Do not use Steam Fresh™ with items such as wool,
wool blanket, leather jackets, silk, wet clothes,
lingerie, foam products, or electric blankets.
• For best results, load articles of similar size and fabric
type. Do not overload.
• When the filter/duct is clogged, the steam option
may not have optimal results.
• When the steam function is operating, the drum will
stop to allow steam to stay in the drum.
• The steam feeder must be filled with water up to
the MAX line. Otherwise, an error message will be
displayed.
STEAM
DEFAULT TIME
TEMP.
CONTROL
DRY
LEVEL
FABRIC
STATE
FABRIC TYPE
MAxIMUM
AMOUNT
STEAM
SANIT
AR
Y
TM
39 minutes
Dry
Comforter
Bedding
Single (1 each)
Children’s
clothing
3 lbs.
STEAM FRESH
TM
20 minutes
Dry
Comforter
Single (1 each)
Shirts*
5 each
+
REDUCE
STATIC
10 minutes
Dry
Shirts*
8 lbs.
(18 Items.)
+
EASY
IRON
12 minutes
Dry
Shirts*
Shirts* (5 each)
STEAM OPTION
+
REDUCE
STATIC
FOLLOWS
SELECTED
CYCLE
Wet
Varies by selected
cycle
8 lbs.
(18 Items.)
+
EASY
IRON
Wet
Varies by selected
cycle
Shirts* (5 each)
TIME DR
Y
+
REDUCE
STATIC
45 minutes
Wet
Varies by selected
cycle
8 lbs.
(18 Items.)
+
EASY
IRON
47 minutes
Wet
Varies by selected
cycle
Shirts* (5 each)
hOW TO uSE
*Shirt: 70% cotton:30% poly blend. Except especially delicate fabrics.
• When the lint filter or exhaust duct is clogged, steam options will not give proper results.
• For best results, load articles of similar size and fabric type. Do not overload.
2014.8.18 9:37:12 AM
35
ENGLISH
Before using the Tag On function
- The Tag On function allows you to conveniently use the
LG Smart DiagnosisTM and Cycle Download features to
communicate with your appliance right from your own
smart phone. To use the Tag On function:
1. Download the LG Smart Laundry&DW App to your
smart phone.
2. Turn on the NFC (Near Field Communication) function
in your smart phone.
- The Tag On function can only be used with smart
phones equipped with the NFC function and based on
the Android operating system (OS).
Turning on the NFC function of the smart phone
1. Enter the “Settings” menu of
the smart phone and select
“Share & Connect” under
“WIRELESS & NETWORKS.”
2.
1
Set “NFC“ and
“Direct/Android Beam” to
ON,
2
and select “NFC”.
3. Check “Use Read and Write/
P2P receive”.
1
2
hOW TO uSE
1
2
1
2
NOTE
Depending on the smart phone manufacturer and
Android OS version, the NFC activation process may
differ. Refer to the manual of your smart phone for
details.
1
2
1
2
The Tag On guide
The Tag On icon
Tag On position
Look for the Tag On icon next to the LED screen
on the control panel. This is where you position
your smart phone when using the Tag On
function with the LG Smart Diagnosis™, Cycle
Download, and Laundry Stats features of the LG
Smart Laundry&DW application.
When you use the Tag On function, position your smart
phone so that the NFC antenna on the back of your
smart phone matches the position of the Tag On icon
on the appliance. If you do not know the position of
your NFC antenna, move your smart phone very slightly
in a circular motion until the application verifies the
connection.
Because of the characteristics of NFC, if the transmission
distance is too far, or if there is a metal sticker or a thick
case on the phone, transmission will not be good.
Press [
] in the LG Smart Laundry&DW app for a
more detailed guide on how to use the Tag On function.
2014.8.18 9:37:16 AM
36
4. Touch the Tag On logo.
- When a Tag On screen
appears (see at right), tap
your smart phone on the Tag
On icon on the right side of
the washer‘s control panel.
- If it isn’t recognized, touch
[
] on the upper right of
the Tag On screen on your
‘LG Smart Laundry&DW’
application to see the
detailed guide. (This might
happen due to the different
NFC antenna positions for
each phone.)
5. Check the diagnosis results
and solutions.
- It shows the diagnosis results
on the cycles recently used.
※
Images are for reference only. The actual LG Smart
Laundry&DW application may be different.
Tag On
This feature uses LG Smart Diagnosis™, Cycle Download,
and Laundry Stats when you touch the LG appliance’s
Tag On logo with your NFC equipped smartphone.
Tag On self-diagnosis using Lg Smart Laundry&DW application
1. Install ‘LG Smart Laundry&DW’ application on a
NFC-equipped smartphone.
- Install the application from the Play store and run it.
2. Select ‘Tag On’.
- Home card and icons at the
bottom of the screen are all
available to use.
3. Select ‘Tag On Diagnosis’.
Scan this QR code with your smart
phone to quickly access the LG Smart
Laundry&DW App for download
hOW TO uSE
2014.8.18 9:37:20 AM
37
ENGLISH
Tag On Smart Diagnosis
1. Select ‘Press to Call LG
Service’ on the Smart
Diagnosis Result screen.
2. Select a your Country Agree on
3. Agree to Terms and Conditions of the Use and
Privacy Policy by pressing “I accept.”
4. Enter your phone number in the field. Use this
phone number when talking to the LG customer
service representative for them to find your Smart
Diagnosis data.
5. Press the Call button to
initiate the call to LG’s
Support Center.
※
Images are for reference only. The actual LG Smart
Laundry&DW application may be different.
1 888 542 2623
Canada
1 888 542 2623
Canada
1 888 542 2623
Canada
hOW TO uSE
2014.8.18 9:37:21 AM
38
5 Select a cycle to download.
- You can also check the existing
cycles already downloaded.
6. Touch the Tag On logo.
- When a Tag On screen
appears (see at right), tap
your smart phone on the Tag
On icon on the right side of
the washer‘s control panel.
- If it isn’t recognized, touch
[
] on the upper right of
the Tag On screen on your
‘LG Smart Laundry&DW’
application to see the detailed
guide.(This might happen due
to the different NFC antenna
positions for each phone.)
7. The new cycle is downloaded
successfully!
- Check whether the new cycle
is downloaded by turning
the cycle selector knob to
Download Cycle.
※
Images are for reference only. The actual LG Smart
Laundry&DW application may be different.
Tag On cycles download using Lg Smart Laundry&DW application
1. Install ‘LG Smart Laundry&DW’ application on a
NFC-equipped smartphone.
- Install the application from the Play store and run it.
2. Select ‘Tag On’.
- Home card and icons at the
bottom of the screen are all
available to use.
3. Select Select ‘Tag On Cycles
Download’.
4. Touch the Tag On logo.
- When a Tag On screen appears
(see at right), tap your smart
phone on the Tag On icon on
the right side of the washer‘s
control panel.
- If it isn’t recognized, touch
[
] on the upper right of
the Tag On screen on your
‘LG Smart Laundry&DW’
application to see the detailed
guide.(This might happen due
to the different NFC antenna
positions for each phone.)
hOW TO uSE
2014.8.18 9:37:23 AM
39
ENGLISH
Laundry Stats
Laundry status can monitor the Flow Sense result in case
your home exhaust system is clogged.
Laundry Stats can also tell you details of your last 10
cycles.
1. Select ‘Tag On’ by using the
top icons or the bottom
icons.
2. Select ‘Laundry Stats’.
4. Touch the Tag On logo.
- When a Tag On screen
appears (see at right), tap
your smart phone on the Tag
On icon on the right side of
the washer‘s control panel.
- If it isn’t recognized, touch
[
] on the upper right of
the Tag On screen on your
‘LG Smart Laundry&DW’
application to see the detailed
guide.(This might happen due
to the different NFC antenna
positions for each phone.)
Check the FLOW SENSE Status
1. Please check the FLOW
SENSE Status in Laundry
Stats screen.
2. Press the “Venting Tips”
button when you home
exhaust system blocked,
please refer to the Guide
about Exhaust check.
※
Images are for reference only. The actual LG Smart
Laundry&DW application may be different.
hOW TO uSE
2014.8.18 9:37:27 AM
40
Laundry Stats (run Cycle Again) using Lg Smart Laundry&DW application
1. Select ‘Dryer Diary’ on the
Laundry Stats screen.
- Select ‘Dryer Diary’ at the
bottom of the Laundry Stats
screen.
- The Dryer Diary display a
chart showing the last 10
cycles used.
- Details of the Most Used
Cycle and the Most Recent
cycle will also be displayed.
2. Select ‘Run Cycle Again’
button.
- The Most Used cycle or
Most Recent cycle can be
immediately started by select
the ‘Run Cycle Again’ button.
3. Touch the Tag On logo.
-
When a Tag On screen
appears(On the right), tap
your smart phone on the Tag
On icon on the right side of
the dryer’s control panel.
- If it isn’t recognized, touch
[
] on the upper right of
the Tag On screen on your
‘LG Smart Laundry&DW’
application to see the
detailed guide. (This might
happen due to the different
NFC antenna positions for
each phone.)
4. Check whether washing
starts with the selected cycle.
- The screen as shown below
appears and Drying starts
immediately on the selected
cycle.
※
Images are for reference only. The actual LG Smart
Laundry&DW application may be different.
hOW TO uSE
2014.8.18 9:37:29 AM
41
ENGLISH
Tag On Cycle Set
Tag On cycle Set allows you to automatically adjust the
cycle and settings based on your laundry needs.
1. Select ‘Tag On’ by using the
top icons or the bottom
icons.
2. Select ‘Tag On Cycle Set’.
3. Touch the Tag On logo.
- When a Tag On screen
appears(On the right), tap
your smart phone on the Tag
On icon on the right side of
the dryer’s control panel.
- If it isn’t recognized, touch
[
] on the upper right of
the Tag On screen on your
‘LG Smart Laundry&DW’
application to see the
detailed guide. (This might
happen due to the different
NFC antenna positions for
each phone.)
4. Select a laundry category
based on the issue you want
the machine to focus on.
5. After selecting the
category, a list of specific
cycles will appear. Select
the cycle based on your
needs.
6. When the Tag On screen
appears (see at right), tap
your smart phone to the
Tag On logo on the right
side of the washer’s or
dryer’s control panel.
7. After tagging the machine
with your phone, the cycle
will automatically start.
Verify the correct cycle and
settings were selected.
※
Images are for reference only. The actual LG Smart
Laundry&DW application may be different.
hOW TO uSE
2014.8.18 9:37:32 AM