PDF User Manual

  1. Home
  2. Manuals
  3. LG Convertible & Ceiling suspended Air Conditioner Owner's Manual

LG Convertible & Ceiling suspended Air Conditioner Owner's Manual

Made by: LG
Type: Owner's Manual
Category: Air Conditioner
Pages: 17
Size: 1.03 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

LG Convertible & 
Ceiling suspended Air Conditioner

OWNER'S MANUAL

LG

Visit us at http://www.lgservice.com

IMPORTANT

• Please read this owner's manual carefully and thoroughly 

before installing and operating your room air conditioner. 

• Please retain this owner's manual for future reference after 

reading it  thoroughly.

Dear Owner
Thank you for installing LG air conditioner.
Your best choice guarantees you a great
performance and service to make your life
comfortable & pleasant.   

 


background image

2

Convertible & Ceiling suspended Air Conditioner

Room Air Conditioner Owner’s Manual

TABLE OF CONTENTS

FOR YOUR RECORDS

Write the model and serial numbers here:

Model #

Serial #

You can find them on a label on the side of each unit.

Dealer's Name

Date Purchased

Staple your receipt to this page in the event you need
it to prove date of purchase or for warranty issues.

READ THIS MANUAL

Inside you will find many helpful hints on how to use
and maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
of time and money over the life of your air conditioner.

You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of

Troubleshooting Tips

first, you may not need to call

for service at all.

PRECAUTION

Contact the authorized service technician for
repair or maintenance of this unit.

• Contact the installer for installation of this unit.
• The air conditioner is not intended for use by

young children or invalids without supervision.

• Young children should be supervised to ensure

that they do not play with the air conditioner.

• When the power cord is to be replaced,

replacement work shall be performed by
authorized personnel only using only genuine
replacement parts.

A. Safety Precautions

..............................3

B. Product Introduction

...........................6

Name and function of part .....................6
What to do before operation..................6
Operation indication lamps....................6

C. Operating Instructions

........................7

How to insert the Batteries ....................7
Wireless Remote Controller 
Maintenance..........................................7
Operating Method..................................7
Wireless Remote Controller...................8
Operation Mode.....................................9
Healthy Dehumidification Operation....10
Auto Operation 
(Cooling type, Multi system) ................10
Auto Changeover Operation 
(Heat Pump type) ................................10
Jet Cool/Heat Operation......................11
Forced operation .................................11
Sleep Mode .........................................12
Setting the Current Time .....................12
Timer Setting .......................................12
Vertical / Horizontal Airflow Direction
Control.................................................13
Air Circulation Mode ............................13
Auto Restart Function..........................13

D. Maintenance and Service

.................14

Indoor Unit...........................................14
Operation Tips!....................................15
When the air conditioner is not going 
to be used for a long time....................15
Troubleshooting...................................16
Call the service immediately in the
following situations ..............................16

 


background image

Owner's Manual 

3

Safety Precautions

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must be followed.

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by
the following indications.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage.

Do not use a defective or underrated
circuit breaker. Use this appliance on a
dedicated circuit.

• There is risk of fire or electric shock.

For electrical work, contact the dealer,
seller, a qualified electrician, or an
Authorized Service Center.

• Do not disassemble or repair the product.

There is risk of fire or electric shock.

Always ground the product.

• There is risk of fire or electric shock.

Install the panel and the cover of control
box securely.

• There is risk of fire or electric shock.

Always install a dedicated circuit and
breaker.

• Improper wiring or installation may cause fire

or electric shock.

Use the correctly rated breaker or fuse.

• There is risk of fire or electric shock.

Do not modify or extend the power cable.

• There is risk of fire or electric shock.

Do not install, remove, or re-install the
unit by yourself (customer).

• There is risk of fire, electric shock, explosion,

or injury.

Be cautious when unpacking and
installing  the product.

• Sharp edges could cause injury. Be

especially careful of the case edges and the
fins on the condenser and evaporator.

For installation, always contact the dealer
or an Authorized Service Center.

• There is risk of fire, electric shock, explosion,

or injury.

Do not install the product on a defective
installation stand.

• It may cause injury, accident, or damage to

the product.

Be sure the installation area does not
deteriorate with age.

• If the base collapses, the air conditioner could

fall with it, causing property damage, product
failure, and personal injury.

Do not let the air conditioner run for a
long time when the humidity is very high
and a door or a window is left open.

• Moisture may condense and wet or damage

furniture.

Take care to ensure that power cable
could not be pulled out or damaged
during operation.

• There is risk of fire or electric shock.

Do not place anything on the power
cable.

• There is risk of fire or electric shock.

Do not plug or unplug the power supply
plug during operation.

• There is risk of fire or electric shock.

Do not touch(operate) the product with
wet hands.

• There is risk of fire or electrical shock.

Do not place a heater or other appliances
near the power cable.

• There is risk of fire and electric shock.

Do not allow water to run into electric
parts.

• It may cause  There is risk of fire, failure of

the product, or electric shock.

Do not store or use flammable gas or
combustibles near the product.

• There is risk of fire or failure of product.

Do not use the product in a tightly closed
space for a long time.

• Oxygen deficiency could occur.

 


background image

4

Convertible & Ceiling suspended Air Conditioner

Safety Precautions

When flammable gas leaks, turn off the
gas and open a window for ventilation
before turn the product on.

• Do not use the telephone or turn switches on

or off. There is risk of explosion or fire.

If strange sounds, or small or smoke
comes from product. Turn the breaker
off or disconnect the power supply
cable.

• There is risk of electric shock or fire.

Stop operation and close the window in
storm or hurricane. If possible, remove
the product from the window before the
hurricane arrives.

• There is risk of property damage, failure of

product, or electric shock.

Do not open the inlet grill of the product
during operation. (Do not touch the
electrostatic filter, if the unit is so
equipped.)

• There is risk of physical injury, electric shock,

or product failure.

When the product is soaked (flooded or
submerged), contact an Authorized
Service Center.

• There is risk of fire or electric shock.

Be cautious that water could not enter
the product.

• There is risk of fire, electric shock, or product

damage.

Ventilate the product from time to time when operating it
together with a stove, etc.

• There is risk of fire or electric shock.

Turn the main power off when cleaning or maintaining the
product.

• There is risk of electric shock.

When the product is not be used for a long time, disconnect the
power supply plug or turn off the breaker.

• There is risk of product damage or failure, or unintended operation.

Take care to ensure that nobody could step on or fall onto the
outdoor unit.

• This could result in personal injury and product damage.

Always check for gas (refrigerant)
leakage after installation or repair of
product.

• Low refrigerant levels may cause failure of

product.

Install the drain hose to ensure that water
is drained away properly.

• A bad connection may cause water leakage.

Keep level even when installing the
product. 

• To avoid vibration or water leakage.

Do not install the product where the
noise or hot air from the outdoor unit
could damage the neighborhoods.

• It may cause a problem for your neighbors.

Use two or more people to lift and
transport the product. 

• Avoid personal injury.

Do not install the product where it will be
exposed to sea wind (salt spray) directly.

• It may cause corrosion on the product.

Corrosion, particularly on the condenser and
evaporator fins, could cause product
malfunction or inefficient operation.

Do not expose the skin directly to cool air
for long periods of time. (Don't sit in the
draft.)

• This could harm to your health.

Do not use the product for special
purposes, such as preserving foods, works
of art, etc. It is a consumer air conditioner,
not a precision refrigeration system.

• There is risk of damage or loss of property.

Do not block the inlet or outlet of air flow.

• It may cause product failure.

Use a soft cloth to clean. Do not use
harsh detergents, solvents, etc.

• There is risk of fire, electric shock, or damage

to the plastic parts of the product.

Do not touch the metal parts of the
product when removing the air filter.
They are very sharp!

• There is risk of personal injury.

Do not step on or put anyting on the
product. (outdoor units)

• There is risk of personal injury and failure of

product.

 


background image

Owner's Manual 

5

Safety Precautions

Always insert the filter securely. Clean
the filter every two weeks or more often if
necessary.

• A dirty filter reduces the efficiency of the air

conditioner and could cause product
malfunction or damage.

Do not insert hands or other objects
through the air inlet or outlet while the
product is operated.

• There are sharp and moving parts that could

cause personal injury.

Do not drink the water drained from the
product.

• It is not sanitary and could cause serious

health issues.

Use a firm stool or ladder when cleaning or maintaining the
product.

• Be careful and avoid personal injury.

Replace the all batteries in the remote control with new ones of
the same type. Do not mix old and new batteries or different
types of batteries.

• There is risk of fire or explosion

Do not recharge or disassemble the batteries. Do not dispose of
batteries in a fire.

• They may burn or explode.

If the liquid from the batteries gets onto your skin or clothes,
wash it well with clean water. Do not use the remote if the
batteries have leaked.

• The chemicals in batteries could cause burns or other health hazards.

If you eat the liquid from the batteries, brush your teeth and see
doctor. Do not use the remote if the batteries have leaked.

• The chemicals in batteries could cause burns or other health hazard. 

 


background image

6

Convertible & Ceiling suspended Air Conditioner

Operation Indication Lamps

1: Indoor unit
2: Outdoor unit
3: Remote controller
4: Inlet air
5: Discharge air
6: Refrigerant piping, connection

electric wire

7: Drain pipe
8: Ground wire 

wire to ground outdoor unit to
prevent electrical shocks.

If your installation has a customized
control system, ask your LG dealer for 
the operation that corresponds to your
system.

A: Pair system or simultaneous

operation system

B: Multi system
1: Unit with remote controller
2: Unit without remote controller (when

used as simultaneous operation)

Product Introduction

Product Introduction

1

3

4

6

5

4

7

2

8

A

B

1

1

1

2

: Lights up during the system operation.

Filter Sign

: Lights up after 2400 hours from the time of first operating unit.

Sleep Mode

: Lights up during Sleep Mode Auto operation.(Option)

Timer

: Lights up during Timer operation.

Defrost Mode

: Lights up during Defrost Mode or Hot Start operation.(Heat pump type)

Outdoor unit 
operation

: Lights up during outdoor unit operation.

(Cooling type)

On/Off 

Name and function of parts

What to do before operation

 


background image

Owner's Manual 

7

Operating Instructions

How to insert the Batteries

Wireless Remote Controller Maintenance

1. Remove the battery cover by pulling it according to the arrow

direction.

2. Insert new batteries making sure that the (+) and (-) of battery are

installed correctly.

3. Reattach the cover by sliding it back into position.

1. Always use/replace both batteries of same type.
2. If the system is not to be used for a long time, remove the

batteries to save their working life.

3. If the display screen of remote controller starts, fading replace

both of the batteries.

NOTE

1. Choose a suitable place where its safe & easy

to reach.

2. Fix the holder to wall etc with the supplied

screws firmly.

3. Slide the remote controller inside the holder.

1. Remote controller should never be exposed to

direct sunlight.

2. Signal transmitter & receiver should always be

clean for proper communication. Use a soft
cloth to clean them.

3. In case some other appliances also get

operated with remote control, change their
position or consult your serviceman.

1. The signal receiver is inside the unit.

2. Aim the remote controller towards the unit to operate it.

There should not be any blockage in between.

NOTE

Operating Instructions

R

Operating Method

 


background image

8

Convertible & Ceiling suspended Air Conditioner

AUTO CLEAN

ON

OFF

CANCEL

SET

1

3

5

4

9

10

12

15

7

2

8

13

14

11

6

Cooling Operation

Auto Operation

Soft dry Operation

Flip-up door
(opened)

Heating Operation

Signal transmitter

• Cooling Model(

), Heat Pump Model(

)

Operation Mode

Operating Instructions

The controls will look like the following.

Wireless Remote Controller

1. ON/OFF BUTTON

Used to turn off/on the unit.

2. OPERATION MODE SELECTION BUTTON

Used to select the operation mode.

3. ROOM TEMPERATURE SETTING BUTTONS

Used to select the room temperature.

4. INDOOR FAN SPEED SELECTOR BUTTON

Used to select fan speed in four steps
low, medium, high and CHAOS.

5. JET COOL BUTTON

Used to start or stop the speed cooling.
(It operates fan in super high speed in cooling mode)

6. CHAOS SWING BUTTON

Used to stop or start louver movement and set the
desired up/down airflow direction.

7. ON/OFF TIMER BUTTONS

Used to set the time of starting and stopping
operation. 

8. TIME SETTING BUTTONS

Used to adjust the time. 

9. TIMER SET/CANCEL BUTTON

Used to set and to cancel the timer operation.

10. SLEEP MODE AUTO BUTTON

Used to set sleep mode auto operation. 

11. AIR CIRCULATION BUTTON

Used to circulate the room air without cooling or
heating.

12. ROOM TEMPERATURE CHECKING BUTTON

Used to check the room temperature.

13. PLASMA BUTTON(OPTIONAL)

Used to start or stop the plasma-purification
function.

14. RESET BUTTON

Used prior to resetting time.

15. 2nd F BUTTON

Used prior to using modes printed in blue at the
bottom of buttons.

To use the functions printed in blue at the bottom of the buttons press 2

nd 

F button first and then the required  function

button. Pressing the 2

nd

F button activates the blue printed function of the respective button. To cancel the  function

press the  2nd F button again else it will automatically cancel if remains idle after 10 seconds.

The actual product can be different from above contents depending upon model type.

NOTE

 


background image

Owner's Manual 

9

ON

Cooling

Auto

Soft Dry

Heating

(Heat pump model only)

1

2

3

4

Fan speed is on low.

Fan speed is on medium.

Fan speed is on high.

CHAOS Air

To lower the temperature

To raise the temperature

Operating Instructions

Press the ON/OFF BUTTON to turn
the unit on. 
The unit will respond with a beep.

Open the door of the remote controller and press the
operation mode button. Each time the button is pressed, the
operation mode is shifted in the direction of the arrow.

For cooling or heating operation set the desired indoor
temperature by pressing the ROOM TEMPERATURE
SETTING BUTTONS.

Set the fan speed with the remote controller. You can select the fan speed in four steps-low,
medium, high and CHAOS by pressing the INDOOR FAN SPEED SELECTOR BUTTON.
Each time the button is pressed, the fan speed mode is shifted.

1

2

3

4

Natural wind by the CHAOS logic

For fresher feeling, press the INDOOR FAN SPEED SELECTOR BUTTON selector and set to CHAOS mode. 
In this mode, the wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.

Operation Mode

Auto changeover function is not available for multi system.

NOTE

 


background image

10

Convertible & Ceiling suspended Air Conditioner

Soft dry

Operation

Auto

Auto

Operating Instructions

Auto Operation (Cooling type)

Auto Operation (Heat pump type)

Soft dry Operation Mode

During Soft dry Operation

If you select the soft dry mode on the OPERATION MODE SELECTION BUTTON,
the product starts to run the soft dry function. It automatically sets the room
temperature and airflow volume to the best condition for dehumidification, based on
the sensed current room temperature.

In this case, however, the setting temperature is not displayed on the remote controller
and you are not able to control the room temperature either.

During the soft dry function, the airflow volume is automatically set according to the
optimization algorithm responding to the current room temperature status, so that the
room condition is kept healthy and comfortable even in the very humid season.

In this operation  mode the actual setting temperature and the fan speed are
automatically set by the electronic control logic based on the current room
temperature. If you feel hot or cold press the temperature setting buttons
respectively for more cooling or heating effect. 

NOTE :

You cannot set the actual setting temperature and the indoor fan 
speed in this operation mode. But you can use the Chaos swing 
in this operation.
If the system is not operating as desired, switch manually to another mode.

Auto operation basically is heating or cooling function of the air conditioner. 
But  during this operation the controller changes the operation mode 
automatically to keep the temperature within ±2°C with respect to the
setting temperature.

To run the soft dry mode follow steps 

1

, and 

2

and 

4

(See operation mode)

To run the auto operation  follow steps 

1

, and 

2

. (See operation mode)

To run this operation follow steps 

1

2

3

, and 

4

. (See operation mode)

Auto Changeover Operation (Pair system) :

You can switch the indoor fan speed. 

The system will automatically switch from the cooling mode to the heating mode, or from heating to cooling,
when you select Auto Opration mode.

Auto Operation (Multi system or Simultaneous system) :

You can switch the indoor fan speed. 

If the system is not operating as desired, manually switch to another mode. The system will not
automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must
set the mode and the desired temperature again.

 


background image

Owner's Manual 

11

Operating Instructions

Jet Cool Operation

Jet cool function can be used to cool the room quickly in hot summer. When this

function is turned on, the air conditioner runs in cooling operation mode with super

high fan speed and 18°C setting temperature for 30 minutes for fast and effective
cooling. However for some models Jet cool function continuous till the operation mode
is changed.

You can activate this operation by pressing the JET COOL BUTTON.
To change from jet cool mode to high fan speed cooling mode, press the JET COOL BUTTON or
INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE SETTING BUTTON again.

• Jet cool function cannot be activated during heating or auto changeover operations.

NOTE

Forced operation

Operation procedures when the remote control can't be used.
The operation will be started if the ON/OFF button is pressed.
If you want to stop operation, re-press the button.

Type 1

Type 2

Type 3

Test operation

During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room
temperature and resets in 18 minutes.
During test operation, if remote controller signal is received, the unit operates as remote controller sets.
If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds.
If you want to stop the operation, re-press the button.

 


background image

12

Convertible & Ceiling suspended Air Conditioner

Operating Instructions

Delay off timer

Delay on timer

Delay off and on timer

Delay on and off timer

1. Time can be set only when you press the RESET BUTTON. Having replacing the batteries, 

you should press the RESET BUTTON to reset the time. Press the Start/Stop button.

2. Press 2nd F button and check if           icon is on.

3. Press the TIME SETTING BUTTONS until the desired time is set.

4. Press the TIME SET/CANCEL BUTTON.

Check the indicator for A.M. and P.M.

NOTE

1. Make sure to set current time correctly on the display of the remote controller.

2. Press 2nd F button.
3. Press the ON/OFF TIMER BUTTONS to turn timer on or off.

4. Press the TIME SETTING BUTTONS until the desired time is set.

5. To set the selected time, press the TIMER SETTING BUTTONS aiming the remote controller at the 

signal receptor.

To cancel the timer setting

Check if            icon is off.
Press the TIMER CANCEL BUTTON aiming the remote controller at the signal receptor.
(The timer lamp on the air conditioner and the display will go off.)

Select one of the following four types of operation.

NOTE

ON

OFF

CANCEL

SET

CANCEL

SET

CANCEL

SET

Setting the Current Time

Timer Setting

1. Press the Sleep Mode Auto button to set the time you want the unit to turn off automatically.

2. The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times.

The sleep mode is available for 1 to 7 times. 
To alter the time period in steps of 1 hour, press the Sleep Mode Button while aiming at air conditioner.

3. Make sure the Sleep Mode Auto LED lights up.

To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star (

) disappears from the

operation display.

: The Sleep Mode will be operated at low fan speed (cooling) or medium fan speed (heat pump only) for quiet sleeping.

IN COOLING MODE

: The temperature will automatically rise by 1°C over the next 30 minutes and by 2°C in 1 hour for

comfortable sleeping.

The actual function can be different from above contents depending upon model type.

NOTE

Sleep Mode

 


background image

Owner's Manual 

13

This operation circulates the air without cooling or heating. It can
be activated by pressing the AIR CIRCULATION BUTTON. Once
the air circulation is activated you can select the air speed by
pressing the INDOOR FAN SPEED SELECTOR BUTTON.

The up/down airflow (Vertical airflow) can be
adjusted by using the remote controller.

1. Press the START/STOP BUTTON to start the

unit.

2. Press CHAOS SWING BUTTON.

3. The louvers will swing up & down

automatically.

4. To stop the louver at a desired angle, 

press         again

To adjust left/right (Horizontal Airflow) direction

Adjust the left/right airflow direction by hand.

: While adjusting vertical airflow direction

louvers, be careful not to touch the evaporator.

Operating Instructions

Vertical / Horizontal Airflow Direction Control

• By pressing the CHAOS SWING BUTTON the horizontal air flow direction is changed automatically based on the chaos

algorithm to distribute the air in the room evenly and at the same time to make the human body feel most comfortable as if
enjoying natural breeze.

• Always use the remote controller to adjust the up and down air flow direction. Manually moving the vertical air flow

direction louver by hand could damage the mechanism.When the unit is shut off, the up/down airflow direction louver will
close the air outlet vent of the system.

NOTE

CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically
changed from high to low or vice versa, depending on the ambient temperature.

NOTE

In case the power comes on again after a power failure, the unit operates automatically to the previous operating
conditions.
So there is no need of activating this function by pressing any key or button.
In the initial mode, the fan operates at a low speed and the compressor starts about 3 minutes later.
As the compressor starts, the fan speed also resumes its previous setting mode.

: In case of absence for a long time while power failure, turn off main power to avoid undesired Auto

restart.

Air Circulation Mode

Auto Restart Function

 


background image

14

Convertible & Ceiling suspended Air Conditioner

Maintenance and Service

Indoor Unit

Before performing any maintenance, turn off the main power to the system.

Clean the unit with a soft dry cloth. Do not use bleach or abrasives.

Never use any of these 
• Water hotter than 40°C. It may cause deformation and discoloration.
• Volatile substances. They may damage the surface of the air conditioner.

Air Filters

The air filters behind the front grille should be checked and cleaned once in every 2 weeks or more often if
neccessary.

1. Lift the front access panel and pull the filter tab slightly forward to remove the filter.

(Pull the filter hook to take the filter out. - ceiling suspended)

2. Clean the filter with a vacuum cleaner or warm, soapy water.

• If dirt is conspicuous, wash with a solution of detergent in lukewarm water.
• If hot water (40°C or more) is used, it may be deformed.

3. After washing with water, dry well in the shade.

4. Re-install the air filter.

Maintenance and Service

Gasoline

Powder

Air filters

(behind front panel)

Air outlet vent

Vertical louver

Horizontal louver

Air inlet vent

Horizontal louver

Vertical louver

Air outlet vent

Air inlet vent
(Inlet grille)

Air filters
(Behind inlet grille)

 


background image

Owner's Manual 

15

Maintenance and Service

Operation Tips!

When the air conditioner is not going ...

Do not overcool the room.

This is not good for the health and
wastes electricity.

Keep blinds or curtains
closed.

Do not let direct sunshine enter
the room when the air conditioner
is in operation.

Keep the room temperature
uniform.

Adjust the vertical and horizontal
airflow direction to ensure a
uniform temperature in the room.

Make sure that the
doors and windows
are shut thight.

Avoid opening doors and
windows as much as
possible to keep the cool
air in the room.

Clean the air filter
regularly.

Blockages in the air filter
reduce the airflow and
lower cooling and
dehumidifying effects.
Clean at least once every
two weeks.

Ventilate the room
occasionally.

Since windows are kept
closed, it is a good idea
to open them and
ventilate the room now
and ten.

Use high fan speed
for effective and fast
cooling.

The unit gives its rated
cooling capacity when the
fan speed is  high.

When air conditioner is not going to be used for a long time.

1. Operate the air conditioner on Air circulation mode for 2 to 3 hours.

• This will dry out the internal mechanisms.

2. Turn off the circuit breaker, and disconnect the power cable.

Turn off the circuit breaker when the air conditioner is not going to be used for a long time. 
Dirt may collect and may cause a fire.

3. Remove the batteries from the Remote Controller.

When the air conditioner is to be used again.

1. Clean the air filter and install it in the indoor unit.

2. Check that the air inlet and outlet of the indoor/outdoor unit are not blocked.

 


background image

16

Convertible & Ceiling suspended Air Conditioner

Troubleshooting

1. Anything abnormal such as burning smell, loud noise etc. happen. Stop the unit and

turn the breaker off. Never try to repair by yourself or restart the system in such cases.

2. Main power cord is too hot or damaged.
3. Error code is generated by self diagnosis.
4. Water leaks from indoor unit even if the humidity is low.
5. Any switch, breaker (safety, earth) or fuse fails to work properly

User must carry routine checkup & cleaning to avoid unit’s poor performance. 
In case of special situation, the job must be carried out by service person only.

Call the service immediately in the following situations

Maintenance and Service

Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or service center.

The air conditioner does not
operate.

The room has a peculiar odor. 

It seems that condensation is
leaking from the air conditioner.

Air conditioner does not
operate for about 3 minutes
after turning on.

Does not cool or heat
effectively.

The air conditioner operation is
noisy.

Remote Controller display is
faint, or no display at all.

Crack sound is heard.

• Check room temperature setting?

• Check if circuit breaker is on?

• Check that this is not a damp smell exuded by

the walls, carpet, furniture, or cloth items in the
room.

• Check the drain hose is connected tight or if

indoor unit is installed even.

• This is the protector of the mechanism.
• Wait about 3 minutes and operation will begin.
• About 3 minutes delay is applied to protect

compressor from frequenty on/off.

• Is the air filter dirty? See air filter cleaning

instructions.

• Has the temperature been set correctly?

• Are the indoor unit's air inlet or outlet vents

obstructed?

• For a noise that sounds like water flowing.

-This is the sound of refrigerant flowing inside the

air conditioner unit.

• For a noise that sounds like the compressed air

releasing into atmosphere.
-This is the sound of the dehumidifying water

being processed inside the air conditioning unit.

• Are the batteries depleted?
• Are the batteries inserted in the opposite (+) and

(-) directions?

• This sound is generated by the

expansion/constriction of the front panel, etc. due
to changes of temperature.

Case

Explanation

See page

14

9

7

 


background image

P/No.: MFL42619202

Printed in Korea

After reading this manual, keep it in a place easily accessible to the user for future reference.