PDF User Manual

  1. Home
  2. Manuals
  3. LG CRD-8480B Owner's Manual

LG CRD-8480B Owner's Manual

CRD-8480C CRD-8481B CRD-8482B

Made by: LG
Type: Owner's Manual
Category: CD/CDR Drive
Pages: 14
Size: 0.37 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

CD-ROM DRIVE

MODEL : CRD-8480B/CRD-8480C

OWNER’S MANUAL
BEDIENUNGSHANDBUCH
MODE D’EMPLOI
MANUALE D’USO
MANUAL DE USUARIO

To enjoy fully all the features and functions of your CD-ROM Drive,
Please read this Owner’s Manual carefully and completely.

website : http//www.LGEservice.com
e-mail : http//www.LGEservice.com/techsup.html

CRD-8480B/C-eng*  8/13/99 10:53 AM  Page 1

 


background image

E-2

CAUTION

:

The laser used in the CD-ROM drive can damage your eyes. 
Do not attempt to open the cover.
To reduce the risk of electric shock, do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.

This unit uses CD-ROM discs 
marked with this symbol:

Use of controls or performance of procedures other than those specified here in may result in hazardous
radiation exposure.

PRODUCT COMPLIES WITH DHHS

RULES 21 C.F.R. SUB-CHAPTER J,

IN EFFECT AT THE DATE OF MANUFACTURE.

WARNING 

: To reduce the risk of fire or electric shock, 

do not expose this appliance to rain or moisture

Industry Canada requirement

This class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.

Cet appareil numŽrique de la classe B respecte toutes les exigences du R•glement sur le matŽriel
brouilleur du Canada.

FCC COMPLIANCE STATEMENT

Note

:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

-   Reorient or relocate the receiving antenna.
-   Increase the separation between the equipment and receiver.
-   Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-   Consult the dealer or an Authorized Service Center for help.

¥ FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the userÕs
authority to operate the equipment.

¥ This CD-ROM Drive is for use only with UL listed personal computers that have installation instructions

detailing user installation of card cage accessory.

This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE
89/336/EEC, 93/68/EEC and 73/23/EEC.

COMPACT

English

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 2

 


background image

DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions : (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.

Equipment Classification :  FCC Class B Peripheral Device(JBP)

Type of Product (EUT) :  CD-R/RW Drive

Manufacturer :  LG Electronics Inc.

Address :  19-1, Cheongho-Ri, Jinwuy-Myon

Pyungtaek-Shi, kyunggi-Do, 451-713 Korea

Attention :  Mr. T.K.Lee - General Manager

Multimedia Standards Team

We hereby declare that the equipment bearing the trade and model
number specified above was tested conforming to the applicable FCC
Rules under the most accurate measurement standards possible, and
that all the necessary steps have been taken and are in force to assure
that production units of the same equipment will continue to comply
with the CommissionÕs requirements.

Trade Name/Model : LG or GoldStar/CED-8041B

Responsible Party :  LG Electronics U.S.A. Inc.
Address: 

6133 N. River Road, Suite 1100
(Riverway Plaza) Rosemont, IL 60018

Contact Person : 

Mr. K.S.Kim, Manager
Tel. No. (847) 692-4500

CD-ROM Drive

LG or Goldstar/CRD-8480B or CRD-8480C

E-3

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 3

 


background image

E-4

Features

Features

E-IDE interface

48X-speed Max 7200KB/sec data transfer rate

75ms random access time

Intelligent 128KB data buffering system

Small CPU bandwidth (MPC spec.)

Motorized tray loading system

Horizontal/Vertical mounting support

Designed for internal mounting

Emergency eject support

Easy audio CD control button support

Supports Windows 95 & 98 Plug-and-Play ATAPI protocol

Multimedia PC MPC 

III

compliant

Photo CD multisession support

System Requirement*

IBM PC AT or compatible, 486 SX 25 processor or higher 
(Pentium 133 Processor or higher recommended).

640 Kb memory (16Mb or higher recommended).

A suitable free standard 5

1

/

4

Ò internal drive bay.

MS-DOS version 3.1 or higher. (Windows 95 and above recommended).

3

1

/

2

Ó 1.44 Mb Floppy Drive.

An existing IDE controller with an available cable connector or a new IDE
controller (recommended with IDE PIO Mode 4 capability) that you will need
to install.

*  

Please note:

certain software (i.e. particularly those including Video

playback) may require an considerably increased specification PC to give
acceptable results.

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 4

 


background image

E-5

Location and Function of Controls

Front View

Back View

Supplied Accessories

z

OwnerÕs Manual        

z

Device Driver(MS-DOS)        

z

Audio Cable

COMPACT

1

2

5

4

6

7

3

DIGITAL

ANALOG

INTERFACE

POWER

D

R

C S M
S L A

G L

G

39

1

+5

+12

GND

40

2

AUDIO

AUDIO

1

2

5

4

3

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 5

 


background image

E-6

Front View

1. Headphone Jack

Standard 

1

/

8

Ó (3.5mm) stereo jack for listening to the audio signal from audio

CDs.

2. Headphone Volume Control

Adjusts the headphone sound level.

3. Disc Drawer

Accepts a CD-ROM disc on its tray.

4. Busy Indicator

The Busy Indicator lights during initialization and data-read operations.

5. Emergency Eject Hole

Insert a paper clip here to eject the drawer manually or when there is no
power.

6. Play/Skip Button

When an Audio CD is in the Disc Drawer, pressing this button will start
playing audio CDs from the first track. If an audio CD is playing, pressing this
button will skip to the next track.

7. Open/Close/Stop Button

This button is pressed to open or close the CD tray.
If an audio CD is playing, pressing this button will stop it, and pressing it
again will open the tray.

Back View

1. Digital Audio Output Connector

This is a digital audio output or Video CD output connector.
You can connect this to a digital audio system or a Video CD Board.

2. Analog Audio Output Connector

The Audio Output Connector connects to a sound card.

3. Master/Slave/CSEL Jumper

These three jumpers are used to set the CD-ROM Drive to either a Master,
Slave, or CSEL device.

4. Interface Connector

This 40-pin connector is used to transfer data and control signals between the
CD-ROM Drive and your PC.

5. Power-in Connector

Attach a power cable from the computer to this connector.

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 6

 


background image

E-7

Installing the Drive

Before installing the drive, turn off the system power. Follow the steps below to
install the CD-ROM drive:

1. Remove the cover from your computer system. Refer to manual for the

computer for details about removing the cover.

2. Insert the CD-ROM drive unit into a free 5.25-inch drive bay. Secure the

CD-ROM drive to the drive bay rails with the mounting screws (supplied).

3. Connect the 4-pin power cable and 40-pin IDE interface cable to the back of

the CD-ROM drive.

Notes:

If there is no spare power cable available in the computer, you will have

to purchase a splitter cable of a suitable type.

The red edge of the IDE cable corresponds to pin 1 of the IDE interface on the
CD-ROM drive.

Please Note

: an IDE cable is not supplied and may be required to be purchased

separately.

If the computer is using a sound card, the drive is connected to the sound card
with an audio cable. This CD-ROM drive is supplied with a Creative Labs
SoundBlaster© compatible audio lead, if this is not suitable for your sound card,
it maybe necessary for you to purchase a suitable lead from your retailer. Refer
to the manual for the sound card for detailed information regarding connection.

DIGITAL

ANALOG

INTERFACE

POWER

D

R

C S M
S L A

G L

G

39

1

+5

+12

GND

40

2

AUDIO

AUDIO

Audio Cable

Red Strip

Power Cable

IDE cable

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 7

 


background image

E-8

4. Adjust the Master/Slave jumpers on the back of the CD-ROM drive as

necessary.
Connect the CD-ROM drive to the IDE ports of your motherboard. In general,
the hard drive will be in Primary IDE port and Master device for booting the
operating system. There are two possible alternate connection for CD-ROM
drive installation.

A) When using a Primary IDE port

If you need to connect your CD-ROM drive to the same Primary IDE port, the
CD-ROM drive should be set to Slave position.

B) When using a Secondary IDE port

You can also connect CD-ROM drive to the Secondary IDE port and set to
Master position.

5. When the installation of the drive unit is complete, replace the computer

cover.

6. Reconnect the computer power cord and turn on the computer.

DIGITAL

ANALOG

INTERFACE

POWER

D

R

C S M
S L A

G L

G

39

1

+5

+12

GND

40

2

AUDIO

AUDIO

DIGITAL

ANALOG

INTERFACE

POWER

D

R

C S M
S L A

G L

G

39

1

+5

+12

GND

40

2

AUDIO

AUDIO

DIGITAL

ANALOG

INTERFACE

POWER

D

R

C S M
S L A

G L

G

39

1

+5

+12

GND

40

2

AUDIO

AUDIO

Master drive
(Booting hard disk)

Master drive
(Booting hard disk)

Master drive
(CD-ROM drive)

Slave drive
(Other IDE drive)

Motherboard

Primary connector

Primary connector

Secondary connector

Slave drive
(CD-ROM drive)

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 8

 


background image

E-9

Device Drivers

When using Windows 98/95 or Window NT Workstation Ver. 4.0, the
installation of any software driver or special device is not required.

This CD-ROM drive is supplied with MS-DOS drivers on a 3

1

/

2

-inch floppy disk.

These drivers are required to use the CD-ROM drive in DOS and Windows 3.1.

Drivers for other Operating Systems are not normally required or available as
they usually have an generic IDE, E-IDE/ATAPI CD-ROM driver built in; Windows
95, 98, NT 3.51 and higher and OS/2 Warp 3.0 are such examples.

If it is necessary to edit any file manually, first make a backup copy on a floppy
disk, then edit the original file, save it to your hard drive, exit, and re-boot the
PC to ensure the change will be implemented.

Running the Install Program (MS-DOS Installation)

1. Insert the diskette into the appropriate drive with DOS booting.
2. Go to the floppy drive by typing A: or B: at the DOS prompt, as appropriate.
3. Type the word INSTALL and press [ENTER].
4. The INSTALL program will begin loading. When loading is complete, the

INSTALL program identification will appear on screen.

5. Follow the instructions on screen.
6. When installation is complete, remove the diskette and reboot your PC.

For Windows 98/95 Users

In order to ensure normal drive operation, please check the following:
¥

The drive is displayed in
[control panels]-[system]-[device manager]-[CD-ROM]

¥

32-bit is displayed in
[control panels]-[system]-[performance]

If the drive is not recognized by your computer, please check the following
items.
¥

If a       indicator is displayed on the IDE controller in [control panels]-
[system]-[device manager]-[harddisk controller], you will need to contact
your PCÕs manufacturer or the motherboardÕs manufacturer and get the
appropriate IDE controller driver.

Run ADD NEW HARDWARE in Control Panel to let PC search again for new
device.

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 9

 


background image

E-10

For Windows NT Workstation Ver. 4.0 Users

In order to ensure normal drive operation, please check the following:
¥

The drive is displayed on the IDE controller in 
[control panels] - [SCSI adapter] - [devices]

If the drive is not recognized by your computer, please check the following
items.
¥

If a        indicator is displayed on the IDE controller in [control panels]-
[SCSI adapter]-[devices], you will need to contact your PCÕs manufacturer
or the motherboardÕs manufacturer and get the appropriate IDE controller
driver.

Emergency Eject

This drive has a function that allows the CD to be ejected manually if this
becomes necessary in an emergency, such as failure of the drive or a power
outage. Follow this procedure in such a case.

NOTE:

DonÕt use this feature except in an emergency.

1) Turn the power to OFF.
2) Poke a fine-tipped object (such as a straightened heavy duty paper clip) into

the small hole at the front. The front door will pop open and the disk tray will
come partway out.

3) Pull the front door to open it all the way, then grip the disc tray between

thumb and forefinger and gently pull it straight out.

NOTE:

This feature is a last measure to be used only in an emergency. Using it

excessively will cause malfunction.

COMPACT

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 10

 


background image

E-11

Installation, Usage and Handling Precautions

Installation

Avoid placing the drive in a location subject to :
-

high humidity

-

high temperature

-

mechanical vibration

-

direct sunlight

Operation

-  During operation, excessive vibration or a sudden jolt to the drive may

cause a malfunction.

-  Avoid exposing the drive to sudden changes in temperature. This may

cause condensation to collect inside the drive.

-  Do not use damaged, cracked, or warped discs.

Transportation

-  Always remove the disc before moving the drive.

Troubleshooting

*

When the CD-ROM drive does not work with the hard disk drive in primary
IDE channel.

(SOLUTION)

1. Check the CD-ROM drive Master/Slave Jumper setting.

The CD-ROM drive must be set to the Slave mode.

2. Check to be sure your hard disk Interface type is IDE type.
3. Check your hard disk Master/Slave Jumper setting.

Some old-version IDE type hard disks were set to Master Only mode.
In that case, contact your hard disk company and change your hard disk
jumper setting to master mode.

4. If the CD-ROM drive does not work with above methods, you may need a

secondary IDE card. If you use the secondary IDE card, you should set the
CD-ROM drive jumper to the master mode if the CD-ROM drive is the first
device you are connecting to the secondary IDE card.

*

When the CD-ROM drive does not install in OS/2 warp.

(SOLUTION)

1. Select 

NON-LISTED IDE CD

.

*

CD-ROM drive is not present in Windows 3.1 or 3.11 or DOSSHELL.

(SOLUTION)

1. When the WIN or DOSSHELL command lines are present in your

AUTOEXEC.BAT, make sure that the MSCDEX.EXE command line appears
before the WIN or the DOSSHELL command lines.

NOTE:

For more information, consult the README.TXT file of the supplied Setup

Diskette.

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 11

 


background image

E-12

Specifications

General

Performance

Audio Specifications

Environment

Power Requirements

NOTE: 

Specifications are subject to change without notice for improvement.

Data Capacity

553 Mbytes (mode 1), 635 Mbytes (mode 2)

Disc Diameter

12 cm/8 cm

Rotational Speed

Approx. 10,500 rpm

Interface

E-IDE

Supported System

IBM PC-AT or Compatible

Transfer rate

Sustained Data Transfer Rate=Max 7200Kbytes/sec

Access Time

Random 75 ms Typical

MTBF

125,000 Power On Hours (Duty Cycle 10%)

Buffer size 

128 Kbytes

Error Rate

ECC on

1 block/10

15

bits (48x)

ECC off

1 block/10

12

bits (48x)

User Data/Block

2,048 bytes/block (Mode1 & Mode2 Form1)
2,340, 2,336 bytes/block (Mode2)
2,324 bytes/block (Mode2 Form2)
2,352 bytes/block (CD-DA)

Supported Disc

CD-DA, CD-ROM, CD-ROM XA-READY, Photo-CD
CD-Plus/CD-Extra, Mixed CD, CD-RW

Frequency Response

20 Hz - 20 KHz +1/-3 dB

S / N Ratio

85 dB

THD

0.05 % at 1 KHz

Channel Separation

80 dB at 1 KHz

Headphone Level

0.70 Vrms (33½)

Line Output Level

0.70 Vrms + 20% (47k½)

Line Output Jack

4-Pin terminal (Rear)

Headphone Jack

¿ 3.5 mm (Front)

Temperature

5 - 45 ¡C

12V + 10%
Ripple < 100m Vpp

1.5A (Maximum)

5V + 5%
Ripple < 100m Vpp 

0.9A (Maximum)

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 12

 


background image

CD-ROM LIMITED WARRANTY

WARRANTY PERIOD

THE ABOVE WARRANTY DOES NOT APPLY:

HOW SERVICE IS HANDLED

Therefore these costs are paid by the consumer.

CUSTOMER ASSISTANCE NUMBERS:

To Prove Warranty Coverage:             Retain your Sales Receipt to prove date of purchase.

Copy of your Sales Receipt must be submitted at the time

warranty service is provided.

To Obtain Product, Customer,             Call 1-800-243-0000 24 hrs/7 days
or Service Assistance: 

Push appropriate menu code,
or http://www.LGEservice.com/techsup.html for support by E-mail.

Push appropriate menu code.

Call 1-800-243-0000 (Mon~Fri 8am~5pm CST)

For Exchange Service:

LG Electronics U.S.A., Inc. will repair or at its option replace, without charge, your product which proves 
to be defective in material or workmanship under normal use, during the warranty period listed below from 
the data of original purchase. This warranty is good only to the original purchaser of the product  
during the warranty period as long as it is in the U.S. including Alaska, Hawaii, and U.S. Territories.

Some states do not allow the exclusion or limitation of incidental or consequential damages or 
limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply  to 
you. This warranty gives you specific legal rights and you may also have other rights which vary 
from state to state.

 

1 Year

1 Year

No other express  warranty is applicable to this product. THE DURATION OF ANY IMPLIED   
WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO 
THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG ELECTRONICS U.S.A., INC. 
SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, 
LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE 
OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR 
IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY 
APPLICABLE TO THIS PRODUCT.  

Internet Address :

http :// www. LGEservice.com

If the unit is defective, a replacement* will be    
sent by 2-day air for the first year.
After one year, repair or a 2-day swap at a
fixed labor charge. For service, please call 
1-800-243-0000 (Mon.~Fri. 7AM~7PM CST)

 

MODEL # 

LABOR 

PARTS

1.  To damages or problems which result from delivery or improper installation.
2.  To damages or problems which result from misuse, abuse, accident, alteration, or incorrect
     electrical current or voltage.
3. To service calls which do not involve defective workmanship or material and explaining the 

operation of the unit.

*   Replacement is a factory-reconditioned unit. Free replacement applies only within the initial 

one-year period. Factory-reconditioned units are available at a low, fixed cost after the one- 
year warranty expires.

CRD-8480B/
CRD-8480C/

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 13

 


background image

CRD-8480B/
CRD-8480C  CD-ROM DRIVE

E N H

A

N

C

E

D

English.......Page E-2 ~ E-12

Deutsch.......Seite D-1 ~ D-7

Français.......Page F-1 ~ F-7

Italiano...........Page I-1 ~ I-7

Spanish.......Página S-1 ~ S-7

CLASS 1 

LASER PRODUCT

KLASSE 1 

LASER PRODUKT

LUOKAN 1 

LASER LAITE

KLASS 1 

LASER APPARAT

P/NO : 3828HM1016F

Printed in Korea

(M-D)

CH01

Copyright

©

1999   LG Electronics Inc.

LG Electronics U.S.A. Inc.

1000 Sylvan Ave. Englewood Cliffs

NJ 07632 U.S.A.

LG Electronics Canada Inc.

235 Superior Blvd, Mississauga

Ontario, Canada

LG Electronics Deutschland GMBH

Jakob-Kaiser-Straße 12,

D-47677 Willich, Germany

LG Electronics U. K. Ltd.

LG House, 264 Bath Road,

Slough Berkshire SL1 4DT

United Kingdom

LG Goldstar France SARL

12, Rue Lech Walesa-Z.I. Pariest

77185 Lognes, France

LG Electronics Italia S.P.A.

Centro Direzione “IL Quadrate” Via Modigliani,

20090 Segrate (MI) Italy

LG Electronics España

Adva, De Europa, 21

28108 Alcovendas (Madrid) Spain

CRD-8480B/C-eng*  8/13/99 10:54 AM  Page 14