Full Text Searchable PDF User Manual
www.lg.com
OWNER'S MANUAL
LG CLOUD T SERIES BOX
CBT42
Please read the safety information carefully before using the product.
LG Cloud T Series Box Model List
ENG
2
ENG
English
Table of Contents
3
ASSEMBLING AND
PREPARING
3
Unpacking
4
Parts and Buttons
5
Product Installation
5
- Using in Horizontal Position
5
- Using in Vertical Position
5
- Mounting on the Back of the Monitor
6
CONNECTING LAN/
PERIPHERALS
6
- LAN Connection
6
- DVI Connection
7
- Extended Monitor Connection
7
- Peripheral device connection
9
TROUBLESHOOTING
10
SPECIFICATIONS
10 Power Indicator
3
ENG
English
ASSEMBLING AND PREPARING
Main Unit
Stand Base
Mount Bracket
Power Cord
Owner's Manual/Card
Four Screws
AC/DC Adapter
ASSEMBLING AND PREPARING
Unpacking
Please check whether all the components are included in the box before using the product. If there are
missing components, contact the retail store where you purchased the product. Note that the product and
components may look different from those shown here.
y
y
Only use an approved LG power adapter.
y
y
Damage caused by other power adapters is not covered by warranty.
y
y
Note that the components may look different from those shown here.
y
y
Without prior notice, all information and specifications in this manual are subject to change to improve
the performance of the product.
y
y
To purchase optional accessories, visit an electronics store or online shopping site or contact the retail
store where you purchased the product.
CAUTION
NOTE
4
ENG
English
ASSEMBLING AND PREPARING
Parts and Buttons
Power Indicator &
Power Button
y
y
On: Power On
y
y
Off: Power Off
Input Connectors
Front Side
Rear Side
5
ENG
English
ASSEMBLING AND PREPARING
Product Installation
Using in Horizontal Position
Using in Vertical Position
1
Firmly attach the stand on the bottom of the
product as illustrated below.
2
Using a coin, turn the screw clockwise to
secure the stand base.
Mounting on the Back of the
Monitor
1
Fix the mount bracket on the back of the
monitor with 4 screws as illustrated below.
2
Put the product on the two latches as illustrated
below.
Assemble the product by aligning the below
two holes out of 4 holes on the product.
y
y
Attach the stand
base to the
stand hinge with
its front part fac-
ing forward.
y
y
If this product is used with upside down, it
may not work properly.
y
y
Use the product with the Kensington lock
facing upward.
NOTE
y
y
The product may not be mounted on some
monitors with mount bracket.
- In this case, use the product in horizontal
or vertical position.
y
y
When connecting the peripherals after
mounting the product on the monitor, be
sure to hold the product.
CAUTION
NOTE
6
ENG
English
Connecting LAN/Peripherals
CONNECTING LAN/PERIPHERALS
DVI Connection
Transmits digital video signals to the monitor. Con-
nect the product using the DVI cable as illustrated
below.
y
y
Connect the input signal cable
and turn in the direction of the
arrow. To prevent disconnection
secure the cable tightly.
y
y
The LAN cable is sold separately.
y
y
The following LAN cable type can be used:
Standard: IEEE 802.3 ETHERNET
y
y
Connect the LAN cable and the peripheral de-
vices to use the CITRIX cloud monitor.
y
y
When connecting the power cord to the
outlet, use a grounded (3-hole) multi-socket
or a grounded power outlet.
y
y
DVI cable is not included in the basic com-
ponents. Use the DVI cable provided with
the monitor or the standard DVI cable.
CAUTION
NOTE
NOTE
LAN Connection
Connect the router or switch to the monitor using a
LAN cable as illustrated below.
7
ENG
English
Connecting LAN/Peripherals
y
y
If the main/sub screen was changed after
extended monitor was connected, the main/
sub can be changed in Setup.
Extended Monitor Connection
Transmits analog signals to the monitor. Connect
the product using the D-sub cable as illustrated
below.
Peripheral device connection
Use the USB, microphone, and headphone port to
connect a peripheral device to the BOX. Connect
as illustrated.
Front Side
Rear Side
NOTE
8
ENG
English
Connecting LAN/Peripherals
y
y
The cloud server settings may affect the perfor-
mance of the headphones, earphones or speak-
ers depending on the connected cloud server.
y
y
The cloud server settings may affect the
functions or speed of the specific USB stor-
age device depending on the connected
cloud server.
y
y
Peripheral devices are sold separately.
y
y
The USB ports can be used to connect the
keyboard, mouse, and other USB devices.
y
y
For an angle plug earphone/microphone, it is
difficult connect it with a peripheral device, so
use a straight type.
Angle Type
Straight Type
NOTE
NOTE
9
ENG
English
TROUBLESHOOTING
TROUBLESHOOTING
Nothing is displayed on the screen
Is the power adapter of the Box
plugged in ?
y
Check if the power cord is correctly plugged in to the power outlet.
Is the power indicator on?
y
Check the power indicator.
Is the power indicator displaying as
red?
y
Adjust the brightness and the contrast of the connected monitor.
Are the BOX and the monitor con-
nected with the signal cable?
y
Check whether the monitor and the Box are properly connected to DVI
cable or D-SUB cable (using DVI to D-Sub gender).
y
y
This box type product is used by connecting the monitor.
y
y
If the monitor does not work normally, the screen may not be displayed correctly.
NOTE
10
ENG
English
SPECIFICATIONS
SPECIFICATIONS
Supported Dis-
play Resolution
(D-SUB, DVI-D)
Maximum Resolution
1920 x 1200 @ 60 Hz
Recommended Resolution 1920 x 1200 @ 60 Hz
Power
Voltage
19 V 1.2 A
Power consumption (Typ.)
(Cloud)
Cloud Mode 8 W
Off Mode ≤ 0.5 W
Dimension
Dimensions (Width x Height x Depth)
With stand
70.3 mm x 189.3 mm x 143.6 mm
Without Stand
185 mm x 30.5 mm x 143.6 mm
Weight (Without
Packaging)
0.65 kg
AC/DC adapter
Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC
Or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
Or Type PSAB-L203A, manufactured by LG Innotek Co.,Ltd
Output: 19 V 1.3 A
Environmental
Conditions
Operating Condition
Temperature: 10°C to 35°C; Humidity: 10% to 80%
Storing Condition
Temperature: -20°C to 60°C; Humidity: 5% to 90%
The specifications are subject to change without notice.
Power Indicator
Mode
LED Color
On Mode
Red
Off Mode
Off
This device meets the EMC require-
ments for home appliances (Class B)
and is intended for home use.
This device can be used in all regions.
Read the owner's manual (CD) carefully
and keep it at hand.
The product label contains necessary
information for after-service.
Model
Serial No.
Declaration of Conformity
Trade Name: LG
Model : CBT42L
Responsible Party: LG Electronics Inc.
Address : 1000 Sylvan Ave. Englewood Cliffs
NJ 07632 U.S.A
TEL: 201-266-2534
*above information is only for USA FCC Regulatory