PDF User Manual

  1. Home
  2. Manuals
  3. LG 910B User Manual

LG 910B User Manual

700M 700ME T710B T710S LCD Monitor

Made by: LG
Type: User Guide
Category: Monitor
Pages: 18
Size: 0.94 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

M

ake sure to read the Important Precautions before using the product. 

Keep the User's Guide(CD) in an accessible place for furture reference.

S

ee the label attached on the back cover and quote this information to your

dealer when you require service.

910B

User’s Guide

 


background image

A1

This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this monitor, observe the following basic rules for its
installation, use, and servicing. Keep it in an accessible place for future
reference.

On Safety

Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnect device. Ensure that the
socket-outlet is easily accessible after installation.

Operate the monitor only from a power source indicated in the specifications of
this manual or listed on the monitor. If you are not sure what type of power supply
you have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.

Hands must be dry when holding the power plug to avoid an electric shock.

Do not damage the power cord by disassembling, bending, pulling or heating up.
It can cause fire or electric shock.

Make sure to completely insert the power plug. Insecure connections can cause
fire.

Do not Open the Monitor.

There are no user serviceable components inside. 
There are Dangerous High Voltages inside, even when the power is OFF. 
Contact your dealer if the monitor is not operating properly.

To Avoid Personal Injury :

Do not place the monitor on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not try to roll a stand with small casters across thresholds or deep pile
carpets.

Important Precautions

 


background image

A2

Important Precautions

To Prevent Fire or Hazards:

Always turn the monitor OFF if you leave the room for more than a short period
of time. Never leave the monitor ON when leaving the house.
Keep children from dropping or pushing objects into the monitor's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this monitor.
During a lightning storm or when the monitor is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Do not bring magnetic devices such as magnets or motors near the picture
tube.

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place
the monitor where the power cord is subject to damage.

Do not use this monitor near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Monitors are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the monitor on a bed, sofa, rug,
etc.
Place the monitor in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the monitor near or over a radiator or heat source.
Do not install the monitor in a dusty area. It can cause fire.

On Cleaning

Unplug the monitor before cleaning the face of the monitor screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the

monitor screen because overspray may cause electrical shock.

On Repacking

Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.

 


background image

A3

A3

Connecting the Monitor

Latch

Before setting up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices. 
Carefully set the monitor face-down with the underside facing you.

Connecting the Tilt/Swivel stand

1.

Align the hooks on the tilt/swivel stand with the matching slots in the base of

the monitor.

2. 

Insert the hooks into slots.

3. 

Slide the tilt/swivel stand toward the front of the monitor until the latches click
into the locked position.

NOTE

This illustration depicts the general model of connection. Your monitor may differ from the
items shown in the picture.

Hook

Slot

Hook

 


background image

A4

Connecting the Monitor

Using the Computer

1.

Connect the signal cable. When mated, tighten the thumbscrews to secure the

connection. 

2.

Connect the power cord into a properly power outlet that is easily accessible and

close to the monitor.

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to 
change the 15 pin high density (3 row) D-sub VGA connector 
on the supplied cable to a 15 pin 2 row connector.

Wall-outlet type

*

NOTE

This is a simplified representation of the rear view.
This rear view represents a general model; your monitor
may differ from the view as shown.

PC-outlet type

*

PC

MAC

Power Cord

Signal Cable

Attached Type

*

Detached Type

*

Varies according to model.

 


background image

A5

Control Panel Functions

Front Panel Controls

Buttons

Use these buttons to choose or adjust items in 
the on screen display.

MENU (or OSD) 
Button

Use this button to enter or exit the on screen 
display.

This Indicator lights up green when the monitor
operates normally. If the monitor is in DPM
(Energy Saving) mode, this indicator color changes
to amber.

Power (DPMS)
Indicator

Use this button to turn the monitor on or off.

Power Button

Use this button to enter a selection in the on 
screen display.

SELECT (or SET)

Button

The Contrast and Brightness functions are also available in the 
On Screen Display (OSD) menu.

Control

Direct Access Function

Control

Function

Button

Button

Bring up Contrast adjustment 

Bring up Brightness adjustment 

 


background image

A6

On Screen Display (OSD) Control Adjustment

Screen Adjustment

Making adjustments to the image size, position and operating parameters of
the monitor is quick and easy with the On Screen Display Control system. A
short example is quick and easy given below to familiarize you with the use of
the controls. The following section is an outline of the available adjustments
and selections you can make using the OSD.

To make adjustments in the On Screen Display, follow these steps:

Press the 

MENU (or OSD) Button

, then the main menu of the OSD

appears.

To access a control, use the        or       

Buttons

. When the icon you want

becomes highlighted, press the 

SELECT (or SET) Button

.

Use the                           

Buttons

to adjust the item to the desired level.

Accept the changes by pressing the 

SELECT (or SET) Button

.

Exit the OSD by Pressing the 

MENU  (or OSD) Button

.

NOTE

Allow the monitor to stabilize for at least 30 minutes before making image adjustments.

Case 1

Case 2

 


background image

A7

Main menu

Sub menu

Reference

On Screen Display(OSD) Selection and Adjustment 

To adjust the brightness and
contrast of the screen

Brightness

Contrast

The following table indicates all the On Screen Display control, adjustment,
and setting menus.

BRIGHTNESS/

CONTRAST

POSITION

V Position

H Position

SIZE

V Size

H Size

SHAPE

Tilt

Side Pincushion

S Pincushion Balance

Parallelogram

Trapezoid

H Corner

Top Corner

Bottom Corner

COLOR

PRESET   6500K

9300K

Temp

R/G/B(User Color)

SETUP

Video Level

Language

OSD Time

SPECIAL

Degauss

Recall

Reset

Moire

H Moire

V Moire

Convergence *

Purity

To adjust the position of the
screen 

To adjust the size of the screen

To adjust the shape of the screen

To customize the color of the
screen

To customize the screen status
for a user's operating environment

To improve the clarity and
stability of the screen 

Adjustable

 


background image

A8

On Screen Display(OSD) Selection and Adjustment 

You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.

OSD Adjust

Description

Brightness
To adjust the brightness of the screen. 

Contrast 
To adjust the contrast of the screen.

Vertical Position
To move image up and down.

Horizontal Position
To move image left and right.

To adjust the brightness and contrast of the screen

To adjust the position of the screen 

OSD Adjust

Description

NOTE

The order of icons may differ depending on the model (A8~A11).

 


background image

A9

On Screen Display(OSD) Selection and Adjustment 

Vertical Size
To adjust image height.

Horizontal Size
To adjust image width.

To adjust the size of the screen 

OSD Adjust

Description

To adjust the shape of the screen

OSD Adjust

Description

Tilt
To correct image rotation.

Side Pincushion
To correct a concave or convex bowing of
the image.

Side Pincushion Balance
To correct the balance of both sides
bowing.

Parallelogram
To correctly adjust the skew of the image.

Trapezoid
To correct geometric distortion.

H Corner

*

Top Corner

*

Bottom Corner

*

To correct an irregular distortion of the
displayed image.

This function is available for

designated models only. 

 


background image

A10

This item is used to select the monitor's
input signal level. The normal level used for
most PCs is 0.7V.
If the screen becomes suddenly washed-
out or blurred, please select 1.0V and try
again.

To choose the language in which the
control names are displayed.
OSD Menus are available in 12 languages:
English, German, French, Spanish, Italian,
Swedish, Finnish, Portuguese, Korean,
Chinese , Russian  and  Polish. 

Set the OSD time, i.e. the length of time a
menu will remain on-screen before it shuts
off automatically. Adjust the time to 5, 10,
20, 30 or 60 seconds.

VIDEO LEVEL

LANGUAGE

OSD TIME

On Screen Display(OSD) Selection and Adjustment 

PRESET

TEMP

RED
GREEN
BLUE

6500K/ 9300K
Select the screen color. 
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.

Select the screen temperature which you
prefer among reddish or bluish or any color
in between. 

Set your own color levels.

To customize the color of the screen

OSD Adjust

Description

To customize the screen status for a user's operating environment

OSD Adjust

Description

 


background image

A11

DEGAUSS

RECALL

RESET

MOIRE

CONVER-
GENCE

*

PURITY

*

On Screen Display(OSD) Selection and Adjustment 

To manually demagnetize the screen to
avoid showing incorrect images or colors.

You can use this function to reload the
modified parameters for screen display
operation, as specified by the user after
purchase: Position, Size, Side Pincushion,
Trapezoid (These recalled options may differ
depending on the mode selected: Preset,
User, or New).
If you don’t want to recall the monitor to
these modified settings, use the         button
to select CANCEL and then press the
SELECT (or SET) button.

Return to all factory default settings except
"LANGUAGE": Brightness, Contrast, Tilt,
Color 9300K, Video Level, OSD Time, Moire,
Purity (These reset options may differ
depending on the mode selected: Preset,
User, or New).
If you don’t want to reset the monitor, use the  

button to select CANCEL and then

press the SELECT (or SET) button.

This item allows you to reduce the degree of
moire. (Moire is caused by interference
Horizontal Scan Line with the periodical dot
screen). It is normally OFF(H:0/V:20).
The moire adjustments may affect the focus
of the screen.
Moire adjustments may shake slightly while
the moire reduction function is on.

This is to adjust the alignment of red
and blue fields.

Use to adjust the purity on the screen
if the color appears uneven.

To improve the clarity and stability of the screen

OSD Adjust

Description

This function is available for

designated models only. 

 


background image

A12

Troubleshooting

Check the following before calling for service.

No image appears

Is the power cord of the
monitor connected?

Is the power indicator light

on?

Is the power on and the

power indicator green?

Is the power indicator

amber?

Do you see an "OUT OF

FREQUENCY" message
on the screen?

Do you see a "SELF

DIAGNOSITICS" message
on the screen?

Check and see if the power cord is connected properly to

the power outlet.

Press the Power button.

Adjust the brightness and the contrast.

If the monitor is in power saving mode, try moving the

mouse or pressing any key on the keyboard to bring up
the screen.

This message appears when the signal from the PC

(video card) is out of horizontal or vertical frequency
range of the monitor. See the 'Specifications' section of
this manual and configure your monitor again.

This message appears when the signal cable between

your PC and your monitor is not connected. Check the
signal cable and try again.

Is the vertical frequency
less than 70Hz or is your
monitor set to the
interlaced mode?

Do you have any

magnetic material such
as adapter, or high-
voltage line near to your
monitor?

Do you hear a "~ding"

sound while the monitor
is flickering?

Set the vertical frequency to 72Hz or higher, and

consult the video card user manual for instructions on
converting to a non-interlaced mode.

(You can set this option under the Display icon of the

Control Panel.)

Remove magnetic sources, such as power

adapters, speakers, or high-voltage lines, away from
the monitor.

Use the normal degaussing function. This function

clears the screen and reduces any screen blur that
may occur due to the surrounding magnetic field. The
screen may flicker for about 5 seconds, accompanied
by a "~ding" sound.

The screen is flickering.

 


background image

A13

Troubleshooting

Do you see basic

discoloration (16 colors)?

Is the screen color unstable
or monochrome?

Do you see black dots on

the screen?

Do you see a partial

blurring on the screen?

Set the color depth to 256 colors or higher: use 'Control

Panel'  'Display'  'Settings'  'Color Palette'

Check the connection of the signal cable. Or pull out the

video card of the PC and insert it again.

This is due to a small amount of foreign or abnormally

florescent material that became fastened on the mask
during manufacturing. It will not affect product
performance.

This happens due to interference from surrounding

magnetic fields, as created when speakers, steel
structures, or high-voltage lines are placed near the
monitor. Remove any such materials from the
immediate vicinity and use the DEGAUSS icon on the
screen adjustment menu to fix the screen.

Do you see the after-image

even when you turn off
the monitor?

A premature aging of the monitor pixels may cause the

prolonged display of a single image on the screen. Be
sure to use a screen saver to maximize the service life of
the monitor.

The screen color is not normal.

I see an after-image on the screen.

Do you see the wave

directly on the screen?

This occurs in inverse proportion to the screen focus,

which can be caused by a particular frequency or video
card. Brighten the screen and use the 'MOIRE' icon on
the screen adjustment menu to adjust the screen.

I see waves on the screen.

Have you installed the

monitor driver?

Be sure to install the monitor driver from the monitor

driver CD (or diskette) that comes with your monitor. Or,
you can also download the driver from our web site:
http://www.lge.com.

Have you installed the monitor driver?

 


background image

A14

Specifications

NOTE

Information in this document is subject to change without notice.

19 inches (18.0 inches viewable) 
90 degree deflection
0.26mm dot pitch
ARAS(Anti-Reflective Anti-Static) coating

Horizontal Freq.

30 - 98kHz (Automatic)

Vertical Freq.

50 - 160Hz (Automatic)

Input Form

Separate TTL, Positive/Negative
CompositeTTL, Positive/Negative

Signal Input

15 pin D-Sub Connector

Input Form

Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive

Max Flicker Free VESA 

1600 x 1200@75Hz

Recommend          VESA 

1280 x 1024@85Hz

DDC 2B

Normal

83W

Stand-by/Suspend

8W

DPM Off

3W                  

Width

43.50 cm / 17.1 inches

Height

43.90 cm / 17.3 inches

Depth

46.00 cm / 18.1 inches

Net

19.0 kg (41.9 lbs)

Europe

AC 200-240V~ 50Hz 1.0A

Others

AC 100-240V~ 50/60Hz 2.0A

The products should be used according to the Power
requirements of each ID LABEL.

Operating Conditions

Temperature

0˚C to 40 ˚C

Humidity

10 % to 90 % non-Condensing

Storage Conditions

Temperature

-20˚C to 60 ˚C

Humidity

5 % to 90 % non-Condensing

Attached(     ), Detached ( O )

Attached( O ), Detached (    )

Wall-outlet type or PC-outlet type

Picture Tube

Sync Input

Video Input

Resolution

Plug&Play

Power
Consumption

Dimensions

&Weight
(with tilt/ swivel       

stand)

Power Input

Environmental
Conditions

Tilt/Swivel Stand

Signal cable

Power cord 

 


background image

A15

Specifications

Preset Modes (Resolution)

Display Modes (Resolution)

Horizontal Freq. (kHz)

Vertical Freq. (Hz)

1
2
3
4

640 x 480
800 x 600

1024 x 768

1280 x 1024

43.269
53.674
68.677
91.146

85
85
85
85

VESA
VESA
VESA
VESA

 


background image

Digitally yours