PDF User Manual

  1. Home
  2. Manuals
  3. LG 32LH550B Owner's Manual

LG 32LH550B Owner's Manual

43LH5500

Made by: LG
Type: Owner's Manual
Category: LED TV
Pages: 15
Size: 6.96 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

P/NO : 0773-CE310013-L202

www.lg.com

Please read this manual carefully before operating  

your TV and retain it for future reference.

32LH550B 43LH5500 

Safety and Reference

LED TV* 

*  LG LED TVs are LCD TVs with LED backlighting.

OWNER’S MANUAL

 


background image

2

ENGLISH

Important Safety Instructions

Always comply with the following precautions 

to avoid dangerous situations and ensure peak 

performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK 

DO NOT REMOVE COVER (OR BACK). NO 

USER SERVICEABLE PARTS INSIDE. REFER TO 

QUALIFIED SERVICE PERSONNEL.

 The lightning flash with arrowhead 

symbol within an equilateral triangle is 

intended to alert the user to the presence of 

uninsulated dangerous voltage within the 

product’s enclosure that may be of sufficient 

magnitude to constitute a risk of electric shock 

to persons.

 The exclamation point within an 

equilateral triangle is intended to alert the 

user to the presence of important operating 

and maintenance (servicing) instructions in 

the literature accompanying the device. 
WARNING/CAUTION 

- TO REDUCE THE RISK OF FIRE AND ELECTRIC 

SHOCK, DO NOT EXPOSE THIS PRODUCT TO 

RAIN OR MOISTURE.

 WARNING

If you ignore the warning message, you may 

be seriously injured or there is a possibility of 

accident or death.

 CAUTION

If you ignore the caution message, you may 

be slightly injured or the product may be 

damaged.

 NOTE

The note helps you understand and use the 

product safely. Please read the note carefully 

before using the product.

WARNING

: This product contains chemicals known 

to the State of California to cause cancer and birth 

defects or other reproductive harm. 

Wash hands 

after handling

.

Read these instructions. 

Keep these instructions. 

Heed all warnings. 

Follow all instructions.

 

Do not use this apparatus near water.

 

Clean only with dry cloth.

 

Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

 

Do not install near any heat sources such 

as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce 

heat.

 

Do not defeat the safety purpose of the 

polarized or grounding-type plug. A polarized 

plug has two blades with one wider than the 

other. A grounding type plug has two blades 

and a third grounding prong. The wide blade or 

the third prong are provided for your safety. If 

the provided plug does not fit into your outlet, 

consult an electrician for replacement of the 

obsolete outlet.

 

Protect the power cord from being walked on 

or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from 

the apparatus.

 


background image

3

ENGLISH

 

Only use attachments/accessories specified by 

the manufacturer.

 

Use only with the cart, stand, tripod, bracket, or 

table specified by the manufacturer, or sold with 

the apparatus. When a cart is used, use caution 

when moving the cart/apparatus combination to 

avoid injury from tip-over.

 

Unplug this apparatus during lightning storms 

or when unused for long periods of time.

 

Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has 

been damaged in any way, such as power-supply 

cord or plug is damaged, liquid has been spilled 

or objects have fallen into the apparatus, the 

apparatus has been exposed to rain or moisture, 

does not operate normally, or has been dropped.

 

Do not press strongly upon the panel with a 

hand or a sharp object such as a nail, pencil, or 

pen, or make a scratch on it.

 

Do not stick metal objects or any other 

conductive material into the power cord. Do 

not touch the end of the power cord while it is 

plugged in.

 

Keep the packing anti-moisture material or 

vinyl packing out of the reach of children. 

Anti-moisture material is harmful if swallowed. 

If swallowed, induce vomiting and go to the 

nearest hospital. Additionally, vinyl packing can 

cause suffocation. Keep it out of the reach of 

children.

 

CAUTION concerning the Power Cord  

(Can differ by country):  

Check the specification page of this owner’s 

manual to be certain concerning current 

requirements. Do not connect too many 

devices to the same AC power outlet as this 

could result in fire or electric shock. Do not 

overload wall outlets. Overloaded wall outlets, 

loose or damaged wall outlets, extension cords, 

frayed power cords, or damaged or cracked 

wire insulation are dangerous. Any of these 

conditions could result in electric shock or fire.  

Periodically examine the cord of your device, 

and if its appearance indicates damage or 

deterioration, unplug it, discontinue use of 

the device, and have the cord replaced with 

an exact replacement part by an authorized 

servicer. Protect the power cord from physical or 

mechanical abuse, such as being twisted, kinked, 

pinched, closed in a door, or walked upon. Pay 

particular attention to plugs, wall outlets, and 

the point where the cord exits the device. Do not 

move the TV with the power cord plugged in. Do 

not use a damaged or loose power cord. Be sure 

do grasp the plug when unplugging the power 

cord. Do not pull on the power cord to unplug 

the TV.

 

Warning

 - To reduce the risk of fire or electrical 

shock, do not expose this product to rain, 

moisture or other liquids. Do not touch the TV 

with wet hands. Do not install this product near 

flammable objects such as gasoline or candles, 

or expose the TV to direct air conditioning.

 

Do not expose to dripping or splashing and 

do not place objects filled with liquids, such as 

vases, cups, etc. on or over the apparatus (e.g., 

on shelves above the unit).

 


background image

4

ENGLISH

 

Grounding

 

(Except for devices which are not grounded.) 

Ensure that you connect the earth ground wire 

to prevent possible electric shock (i.e., a TV 

with a three-prong grounded AC plug must 

be connected to a three-prong grounded AC 

outlet). If grounding methods are not possible, 

have a qualified electrician install a separate 

circuit breaker. Do not try to ground the unit by 

connecting it to telephone wires, lightning rods, 

or gas pipes.

Circuit

Breaker

Power 

Supply

 

As long as this unit is connected to the AC wall 

outlet, it is not disconnected from the AC power 

source even if the unit is turned off.

 

Do not attempt to modify this product in any 

way without written authorization from LG 

Electronics. Unauthorized modification could 

void the user’s authority to operate this product.

 

Outdoor Antenna Grounding

 

(Can differ by country): 

If an outdoor antenna is installed, follow the 

precautions below. An outdoor antenna system 

should not be located in the vicinity of overhead 

power lines or other electric light or power 

circuits, or where it can come in contact with 

such power lines or circuits as death or serious 

injury can occur. Be sure the antenna system is 

grounded to provide some protection against 

voltage surges and built-up static charges. 

Section 810 of the National Electrical Code (NEC) 

in the U.S.A. provides information with respect 

to proper grounding of the mast and supporting 

structure, grounding of the lead-in wire to 

an antenna discharge unit, size of grounding 

conductors, location of antenna discharge 

unit, connection to grounding electrodes and 

requirements for the grounding electrode. 

Antenna grounding according to the National 

Electrical Code, ANSI/NFPA 70

Ground Clamp

Grounding Conductor 

(NEC Section 810-21)

Antenna Lead in Wire

Electric Service 

Equipment

Antenna Discharge Unit 

(NEC Section 810-20)

Ground Clamp

Power Service Grounding 

Electrode System 

(NEC Art 250, Part H)

NEC: National Electrical Code

 

Cleaning

 

When cleaning, unplug the power cord and wipe 

gently with a soft cloth to prevent scratching. Do 

not spray water or other liquids directly on the 

TV as electric shock may occur. Do not clean with 

chemicals such as alcohol, thinners, or benzene.

 

Moving

 

Make sure the product is turned off, unplugged, 

and all cables have been removed. It may take 2 

or more people to carry larger TVs. Do not press 

or put stress on the front panel of the TV.

 

Ventilation

 

Install your TV where there is proper ventilation. 

Do not install in a confined space such as a 

bookcase. Do not cover the product with cloth or 

other materials while plugged. Do not install in 

excessively dusty places.

 

If you smell smoke or other odors coming from 

the TV, unplug the power cord and contact an 

authorized service center.

 

If water or another substance enters the 

product (like an AC adapter, power cord, or TV), 

disconnect the power cord and contact the 

service center immediately. Otherwise, this may 

result in fire or electric shock.

 

Use only an authorized AC adapter and power 

cord approved by LG Electronics.  

Otherwise, this may result in fire, electric shock, 

malfunction, or product deformation.

 

Never disassemble the AC adapter or power 

cord. This may result in fire or electric shock.

 

Handle the adapter carefully to avoid dropping 

or striking it. An impact could damage the 

adapter.

 


background image

5

ENGLISH

 

Keep the product away from direct sunlight.

 

Never touch this apparatus or antenna during a 

lightning storm.

 

When mounting a TV on the wall, make sure not 

to install the TV by hanging the power and signal 

cables on the back of the TV.

 

Do not allow an impact shock, any objects to fall 

into the product, and do not drop anything onto 

the screen.

 

DISCONNECTING THE DEVICE FROM THE MAIN 

POWER

 

The power plug is the disconnecting device. 

In case of an emergency, the power plug must 

remain readily accessible.

 

Batteries

   

Store the accessories (battery, etc.) in a safe 

location out of the reach of children.

 

This apparatus uses batteries. In your community 

there might be regulations that require you 

to dispose of these batteries properly due to 

environmental considerations. Please contact 

your local authorities for disposal or recycling 

information.

 

The battery (battery or batteries or battery pack) 

shall not be exposed to excessive heat such as 

sunshine, fire or the like.

 

Do not short circuit, disassemble, or allow the 

batteries to overheat.

 

Do not use high voltage electrical equipment 

near the TV, (e.g., a bug zapper.)  

This may result in product malfunction.

 

Dot Defect

 

The panel is a high technology product with 

resolution of two million to six million pixels. 

In a very few cases, you could see fine dots on 

the screen while you’re viewing the TV. Those 

dots are deactivated pixels and do not affect the 

performance and reliability of the TV.

 

Generated Sound

 

Cracking noise

 A cracking noise that occurs 

when watching or turning off the TV is 

generated by plastic thermal contraction due to 

temperature and humidity. This noise is common 

for products where thermal deformation is 

required.  

Electrical circuit humming/panel buzzing

 

A low level noise is generated from a high-

speed switching circuit, which supplies a large 

amount of current to operate a product. It varies 

depending upon the product. This generated 

sound does not affect the performance and 

reliability of the product.

 

Take care not to touch the ventilation openings. 

When watching the TV for a long period, the 

ventilation openings may become hot. This does 

not affect the performance of the product or 

cause defects in the product.

 

Do not install this product on a wall if it could be 

exposed to oil or oil mist. This may damage the 

product and cause it to fall.

 

If the TV feels cold to the touch, there may 

be a small flicker when it is turned on. This is 

normal; there is nothing wrong with TV. Some 

minute dot defects may be visible on the screen, 

appearing as tiny red, green, or blue spots. 

However, they have no adverse effect on the TV’s 

performance. Avoid touching the LCD screen or 

holding your finger(s) against it for long periods 

of time. Doing so may produce some temporary 

distortion effects on the screen.

 

Displaying a still image for a prolonged period 

of time may cause an image sticking. Avoid 

displaying a fixed image on the TV screen for a 

extended length of time.

Preparing

 NOTE

 

Image shown may differ from your TV.

 

Your TV’s OSD (On Screen Display) may differ 

slightly from that shown in this manual.

 

The available menus and options may differ from 

the input source or product model that you are 

using.

 

New features may be added to this TV in the 

future.

 

The items supplied with your product may vary 

depending upon the model.

 

Product specifications or contents of this manual 

may be changed without prior notice due to 

upgrade of product functions.

 

For an optimal connection, HDMI cables and 

USB devices should have bezels less than 10 mm 

(0.39 inches) thick and 18 mm (0.7 inches) width.

 

Use an extension cable that supports USB 2.0 if 

the USB cable or USB flash drive does not fit into 

your TV’s USB port.

 

Use a certified cable with the HDMI logo 

attached. If you do not use a certified HDMI 

cable, the screen may not display or a 

connection error may occur.

 

Recommended HDMI cable types

 - High-Speed HDMI®/™ cable

 - High-Speed HDMI®/™ cable with Ethernet

B

A

A

B

*A   10 mm (0.39 inches)

*B   18 mm (0.7 inches)

       This equipment is a Class 

electrical appliance. It has been designed in such a 

way that it does not require a safety connection to 

electrical earth.

or double insulated 

 


background image

6

ENGLISH

 CAUTION

 

Do not use any unapproved items to ensure the 

safety and lifespan of the product. 

 

Any damages or injuries by using unapproved 

items are not covered by the warranty. 

 

Some models appear to have a thin film on the 

screen. It is actually part of the screen; do not 

remove it.

 

When attaching the stand to the TV set, place 

the screen facing down on a cushioned table or 

flat surface to protect the screen from scratches.

 

Make sure that the screws are fastened tightly. 

(If they are not fastened securely enough, the TV 

may tilt forward after being installed.)

 

Do not fasten the screws with excessive force 

otherwise they may be worn out and become 

loose.

Lifting and Moving the TV

When moving or lifting the TV, read the following 

to prevent the TV from being scratched or 

damaged and for safe transportation regardless of 

its type and size.

 

It is recommended to move the TV in the box or 

packing material that the TV originally came in.

 

Before moving or lifting the TV, disconnect the 

power cord and all cables.

 

When holding the TV, the screen 

should face away from you to 

avoid damage.

 

Hold the top and bottom of the TV frame firmly. 

Make sure not to hold the transparent part, 

speaker, or speaker grille area.

 

Use at least two people to move 

a large TV.

 

When transporting the TV by 

hand, hold the TV as shown in the 

following illustration.

 

When transporting the TV, do not expose the TV 

to jolts or excessive vibration.

 

When transporting the TV, keep the TV upright; 

never turn the TV on its side or tilt towards the 

left or right.

 

When handling the TV, be careful not to damage 

the protruding buttons.

 CAUTION

 

Avoid touching the screen at all times, as this 

may result in damage to the screen.

 

Do not place the product on the floor with its 

front facing down without padding. Failure to do 

so may result in damage to the screen.

 

Do not move the TV by holding the cable 

holders, as the cable holders may break, and 

injuries and damage to the TV may occur. 

(Depending upon model)

Turn on /Turn off the TV

(Image shown may differ from your TV.)

 NOTE

 Power Button

 

This series has only power On/Off buttons.

 


background image

7

ENGLISH

Mounting on a Wall

An optional wall mount can be used with your 

LG Television. Consult with your local dealer for 

a wall mount that supports the VESA standard 

used by your TV model. Carefully attach the wall 

mount bracket at the rear of the TV. Install the wall 

mount bracket on a solid wall perpendicular to the 

floor. If you are attaching the TV to other building 

materials, please contact qualified personnel to 

install the wall mount. Detailed instructions will 

be included with the wall mount. We recommend 

that you use an LG brand wall mount. The LG wall 

mount is easy to adjust or to connect the cables. 

When you do not use LG’s wall mount bracket, 

use a wall mount bracket where the device is 

adequately secured to the wall with enough space 

to allow connectivity to external devices. If you are 

using a non-adjustable mount, attach the mount 

to the wall. Attach the cables to the TV first, then 

attach the TV to the mount.

Mounting on a Table

1  Lift and tilt the TV into its upright position on a 

table.

 - Leave a 10 cm (4 inches) (minimum) space from 

the wall for proper ventilation.

2  Connect the power cord to a wall outlet.

 CAUTION

 

Do not place the TV near or on sources of heat, 

as this may result in fire or other damage.

10 cm

10 cm

(4 inches)

Make sure to use screws and wall mounts that 

meet the VESA standard. Standard dimensions for 

the wall mount kits are described in the following 

table.

A

B

Model

32LH550B 

43LH5500 

VESA (A x B) 
Standard screw

M4

100×100

200×200
M6

Number of screws

4

LSW140B

LSW240B

MSW240

4

Wall mount bracket 

(optional)

10 cm

10 cm

10 cm

10 cm

(4 inches)

(Image shown may differ from your TV.)

Using the Kensington security 

system (optional)

 

The Kensington security system connector is 

located at the rear of the TV. 

For more information of installation and using,  

refer to the manual provided with the Kensington 

security system or visit http://www.kensington.com.
Connect the Kensington security system cable 

between the TV and a table.

The Kensington security system is optional. You 

can obtain additional accessories from your local 

dealer.

 NOTE

 


background image

8

ENGLISH

Connect an antenna, cable, or cable box to watch 

TV while referring to the following. The illustrations 

may differ from the actual items and an RF cable is 

optional.

 CAUTION

 

Make sure not to bend the copper wire of the RF 

cable.

Copper wire

 

Complete all connections between devices, and 

then connect the power cord to the power outlet 

to prevent damage to your TV.

 NOTE

 

Use a signal splitter to use 2 TVs or more.

 

DTV Audio Supported Codec: MPEG, Dolby 

Digital.

Other Connections

Connect your TV to external devices. For the best 

picture and audio quality, connect the external 

device and the TV with the HDMI cable.

 NOTE

 

HDMI Audio Supported Format:  

DTS (44.1 kHz / 48 kHz),  

AC3 (32 kHz / 44.1 kHz / 48 kHz),  

PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 

kHz) (Depending upon model)

Remote Control

(Depending upon model)
The descriptions in this manual are based on 

the buttons on the remote control. Please read 

this manual carefully and use the TV correctly. To 

install batteries, open the battery cover, replace 

batteries (1.5 V AAA) matching the   and   ends 

to the label inside the compartment, and close 

the battery cover. Failure to match the correct 

polarities of the battery may cause the battery 

to burst or leak, resulting in fire, personal injury, 

or ambient pollution. To remove the batteries, 

perform the installation actions in reverse. This 

remote uses infrared light. When in use, it should 

be pointed in the direction of the TV’s remote 

sensor. 

 CAUTION

Do not install this product on a wall if it 

could be exposed to oil or oil mist. This may 

damage the product and cause it to fall.

 CAUTION

 

Remove the stand before installing the TV on a 

wall mount by performing the stand attachment 

in reverse.

Connecting to an Antenna or 

Cable

To prevent injury, this apparatus must be securely

attached to the floor/wall in accordance with the

installation instructions.

Connections (Notifications)

You can connect various external devices to the TV. 

Supported external devices are: HD receivers, DVD 

players, VCRs, audio systems, USB storage devices, 

PC, gaming devices, and other external devices. For 

more information on external device’s connection, 

refer to the manual provided with each device.

 NOTE

 

If you record a TV program on a DVD recorder or 

VCR, make sure to connect the TV signal input 

cable to the TV through a DVD recorder or VCR. 

For more information about recording, refer to 

the manual provided with the connected device.

 

The external device connections shown may 

differ slightly from illustrations in a manual.

 

Connect external devices to the TV regardless 

about the order of the TV port.

 

If you connect a gaming device to the TV, use the 

cable supplied with the gaming device.

 

Refer to the external equipment’s manual for 

operating instructions.

 

The TV may be capable of operating without a 

set-top from a multichannel video programming 

distributor (MVPD).

 


background image

9

ENGLISH

A

A

 (Power)

 Turns the TV on or off.

 Returns to the last TV channel.

 Activates or deactivates the subtitles.

 

 Shows information on the current 

program.

 

 Resizes an image.

 (Input)

 Changes the input source. 

Number button

 Enters numbers.

 (Dash)

 Inserts a dash between numbers such as 

2-1 and 2-2.

 Accesses the saved channel list.

 Alternates between the two last 

channels selected (pressing repeatedly).

 

   Adjusts the volume level.

 Accesses your favorite channel list.

 Displays the program event according to 

time scheduler.

(Mute)

 Mutes all sounds.

   

 Scrolls through the saved channels.

 

 

 Moves to the previous or next screen.

B

B

 Changes the picture mode.

 (Home)

 Accesses the Home menu.

 Changes the sound mode.

 (Q.Settings)

 Accesses the quick settings.

 Accesses the quick menu.

Navigation button

 (up / down / left / right)  

Scrolls through menus or options. 

   Selects menus or options and confirms your 

input.

 Returns to the previous screen.

 Clears all on-screen displays and returns to TV 

viewing.

 Enables SAP (Secondary Audio Program) 

Feature.

 Sets the length of time until the TV to turns 

off.

,  ,  ,  , 

Control buttons for media contents.

Buttons

  These access special functions 

in some menus. 

 


background image

10

Licenses

Supported licenses may differ by model.  

For more information about licenses,  

visit 

www.lg.com.

 

External Control Device Setup 

To obtain the external control device setup 

information, please visit 

www.lg.com.

Open Source Software Notice 

Information

To obtain the source code under GPL, LGPL, MPL, 

and other open source licenses, that is contained in 

this product, please visit 

http://opensource.lge.com. 

 

In addition to the source code, all referred license 

terms, warranty disclaimers and copyright notices 

are available for download.
LG Electronics will also provide open source code 

to you on CD-ROM for a charge covering the cost 

of performing such distribution (such as the cost of 

media, shipping, and handling) upon email request 

to 

opensource@lge.com.

 This offer is valid for three 

(3) years from the date on which you purchased 

the product.

Troubleshooting

 

Cannot control the TV with the remote control.

 - Check if anything such as tape has been placed 

over the receiver.

 - Check if there is any obstacle between the 

product and the remote control.

 - Replace the batteries with new fresh ones.

 

No image display and no sound is produced.

 - Check if the product is turned on. 

 - Check if the power cord is connected to a wall 

outlet.

 - Check if there is a problem in the wall outlet by 

connecting other products.

 

The TV turns off suddenly.

 - Check the power control settings.  

The power supply may be interrupted.

 - Check if the 

Sleep Timer

 / 

Timer Power Off

 

feature is activated in the 

TIMERS

 settings. 

 - If there is no signal while the TV is on, the TV 

will turn off automatically after 15 minutes of 

inactivity.

Specifications

Product specifications may be changed without 

prior notice due to upgrade of product functions.

Television System

ATSC, NTSC-M, 64 & 256 QAM

Program Coverage 

VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, 

CADTV 1-135

External Antenna Impedance 

75 Ω

Environment condition

 

Operating Temperature

 

0 °C to 40 °C (32 °F to 104 °F)

 

Operating Humidity

 

Less than 80 %

 

Storage Temperature

 

-20 °C to 60 °C (-4 °F to 140 °F)

 

Storage Humidity

 

Less than 85 %

ENGLISH

 


background image

11

Wireless LAN module 

(WN8122E1) Specifications

Standard

IEEE 802.11a/b/g/n

Frequency 

Range

2400 to 2483.5 MHz 

5150 to 5250 MHz 

5725 to 5850 MHz

Output Power 

(Max.)

802.11a: 16.5 dBm 

802.11b: 16 dBm 

802.11g: 15.5 dBm 

802.11n - 2.4 GHz: 15.5 dBm 

802.11n - 5 GHz: 16.5 dBm

 

As band channels can vary per country, the 

user cannot change or adjust the operating 

frequency. This product is configured for the 

regional frequency table.

 

For consideration of the user, this device 

should be installed and operated with a 

minimum distance of 20 cm (7.8 inches) 

 

Contains FCC ID: BEJWN8122E1 /  

Contains IC: 2703H-WN8122E1

Regulatory

FCC NOTICE

(For USA)
This equipment has been tested and found to 

comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection 

against harmful interference in a residential 

installation. This equipment generates, uses 

and can radiate radio frequency energy and, if 

not installed and used in accordance with the 

instructions, may cause harmful interference 

to radio communications. However, there is no 

guarantee that interference will not occur in a 

particular installation. If this equipment does 

cause harmful interference to radio or television 

reception, which can be determined by turning 

the equipment off and on, the user is encouraged 

to try to correct the interference by one or more of 

the following measures:

 - Reorient or relocate the receiving antenna.

 - Increase the separation between the 

equipment and the receiver.

 - Connect the equipment to an outlet on a circuit 

different from that to which the receiver is 

connected.

 - Consult the dealer or an experienced radio/TV 

technician for help.

This device complies with part 15 of the FCC 

Rules. Operation is subject to the following two 

conditions: (1) this device may not cause harmful 

interference and (2) this device must accept any 

interference received, including interference that 

may cause undesired operation of the device. Any 

changes or modifications in construction of this 

device which are not expressly approved by the 

party responsible for compliance could void the 

user’s authority to operate the equipment.

between the device and the body.  

ENGLISH

 


background image

ENGLISH

12

FCC Radio Frequency Interference 

Requirements (for UNII devices)

High power radars are allocated as primary users 

of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. 

These radar stations can cause interference with 

and/or damage this device. This device cannot be 

co-located with any other transmitter.

FCC RF Radiation Exposure Statement

[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with FCC radiation 

exposure limits set forth for an uncontrolled 

environment. This transmitter must not be 

colocated or operating in conjunction with any 

other antenna or transmitter. This equipment 

should be installed and operated with minimum 

distance 20 cm (7.8 inches) between the radiator 

and your body. Users must follow the specific 

operating instructions for satisfying RF exposure 

compliance.

Industry Canada Statement

(For Canada) 

[For having wireless function (WLAN, Bluetooth,...)]
This device complies with Industry Canada’s 

licence-exempt RSSs. Operation is subject to the 

following two conditions:
1. This device may not cause interference; and
2. This device must accept any interference, 

including interference that may cause undesired 

operation of the device.

IC Radiation Exposure Statement

(For Canada) 

[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with IC radiation 

exposure limits set forth for an uncontrolled 

environment. This equipment should be installed 

and operated with minimum distance 20 cm (7.8 

inches) between the antenna & your body.

NOTE

 : THE MANUFACTURER IS NOT RESPONSIBLE 

FOR ANY RADIO OR TV INTERFERENCE CAUSED 

BY UNAUTHORIZED MODIFICATIONS TO THIS 

EQUIPMENT. SUCH MODIFICATIONS COULD 

VOID THE USER’S AUTHORITY TO OPERATE THE 

EQUIPMENT.

 WARNING

(For Canada) 

[For product having the wireless function using 5 

GHz frequency bands]

 

The device for operation in the band 5150–5250 

MHz is only for indoor use to reduce the 

potential for harmful interference to co-channel 

mobile satellite systems;

 

For devices with detachable antenna(s), the 

maximum antenna gain permitted for devices in 

the bands 5250-5350 MHz and 5470-5725 MHz 

shall be such that the equipment still complies 

with the e.i.r.p. limit;

 

For devices with detachable antenna(s), the 

maximum antenna gain permitted for devices in 

the band 5725-5850 MHz shall be such that the 

equipment still complies with the e.i.r.p. limits 

specified for point-to-point and non-point-to-

point operation as appropriate; and

 

The worst-case tilt angle(s) necessary to remain 

compliant with the e.i.r.p. elevation mask 

requirement set forth in Section 6.2.2(3) shall be 

clearly indicated.(devices operating in the band 

5250-5350 MHz with a maximum e.i.r.p. greater 

than 200 mW)

 

High-power radars are allocated as primary users 

(i.e. priority users) of the bands 5250–5350 MHz 

and 5650–5850 MHz and that these radars could 

cause interference and/or damage to LE-LAN 

devices.

NOTE TO CABLE/TV INSTALLER

(For USA and Canada)
This reminder is provided to call the CATV system 

installer’s attention to Article 820-40 of the 

National Electric Code (U.S.A.). The code provides 

guidelines for proper grounding and, in particular, 

specifies that the cable ground shall be connected 

to the grounding system of the building, as close 

to the point of the cable entry as practical.

 


background image

ENGLISH

13

LG Recycling Policy

(For USA)

LG Electronics offers a customized e-waste take-

back and recycling service that meets local needs 

and requirements in the countries where e-waste 

regulations are in place, and also provides product 

and packaging take-back and recycling service 

voluntarily in some countries. LG Electronics 

evaluates products’ recyclability at the design step 

using LG’s recyclability evaluation tool, with the 

goal of improving recyclability where practicable. 

Through these activities, LG seeks to contribute to 

conserving natural resources and protecting the 

environment. 

For more information about the LG Recycling 

Policy, please visit our global site at  

http://www.lg.com/global/sustainability/

environment/take-back-recycling

WARNING!

Never place a television set in an unstable 

location. A television set may fall, causing serious 

personal injury or death. Many injuries, particularly 

to children, can be avoided by taking simple 

precautions such as:

 

Using cabinets or stands recommended by the 

manufacturer of the television set.

 

Only using furniture that can safely support the 

television set.

 

Ensuring the television set is not overhanging 

the edge of the supporting furniture.

 

Not placing the television set on tall furniture 

(for example, cupboards or bookcases) without 

anchoring both the furniture and the television 

set to a suitable support.

 

Not placing the television set on cloth or other 

materials that may be located between the 

television set and supporting furniture.

 

Educating children about the dangers of 

climbing on furniture to reach the television set 

or its controls.

If your existing television set is being retained 

and relocated, the same considerations as above 

should be applied.

Symbols

Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

 


background image

THE CONSUMER ELECTRONICS INDUSTRY CARES

TUNE IN TO SAFETY

 ALWAYS
ALWAYS
NEVER

NEVER

ALWAYS
ALWAYS

WALL OR CEILING MOUNT YOUR TELEVISION

ALWAYS

ALWAYS

ALWAYS
ALWAYS

MOVING  AN  OLDER  TELEVISION  TO  A  NEW  PLACE  IN 

YOUR HOME

ALWAYS

NEVER 

ALWAYS

CHILD SAFETY:

 

PROPER TELEVISION PLACEMENT MATTERS

CE.org/safety

 


background image

The model and serial numbers of the TV are located 

on the back and on one side of the TV. Record them 

below should you ever need service.

MODEL 

SERIAL 

LG Customer Information Center

For inquires or comments, visit www.lg.com or call;

1-800-243-0000

USA, Consumer User

1-888-865-3026

USA, Commercial User

1-888-542-2623

CANADA

Register your product Online!

www.lg.com

Declaration of Conformity

Trade Name: LG

Model:  32LH550B-UA, 43LH5500-UA

Responsible Party: LG Electronics Inc.

Address:  1000 Sylvan Ave. Englewood Cliffs NJ 

07632 U.S.A

TEL: 201-266-2534