PDF User Manual

  1. Home
  2. Manuals
  3. LG 26LQ630H Quick Reference Manual

LG 26LQ630H Quick Reference Manual

Made by: LG
Type: Quick Reference Guide
Category: LCD TV
Pages: 16
Size: 2.19 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

LED LCD TV

QUICK REFERENCE GUIDE

Please read this quick reference guide carefully
before operating your set and retain it for future reference.

P/NO : MFL62194634 (1202-REV01)

www.lgsolutions.com

22LQ630H

26LQ630H

32LQ630H

 


background image

2

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance 
of your product.

y

y

Read these instructions.

y

y

Keep these instructions.

y

y

Heed all warnings.

y

y

Follow all instructions.

y

y

Do not use this apparatus near water.

y

y

Clean only with a dry cloth.

y

y

Do not block any ventilation openings. Install 
in accordance with the manufacturer’s 
instructions.

y

y

Do not install near any heat sources such 
as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce 
heat.

y

y

Do not defeat the safety purpose of the 
polarized or grounding-type plug. A polarized 
plug has two blades with one wider than the 
other. A grounding type plug has two blades 
and a third grounding prong. The wide blade 
or the third prong are provided for your safety. 
If the provided plug does not fit into your 
outlet, consult an electrician for replacement 
of the obsolete outlet (Can differ by country).

y

y

Protect the power cord from being walked on 
or pinched particularly at plugs, convenience 
receptacles, and the point where they exit 
from the apparatus.

y

y

Only use attachments/accessories specified 
by the manufacturer.

y

y

Use only with a cart, stand, tripod, bracket, 
or table specified by the manufacturer, or 
sold with the apparatus. When a cart is used, 
use caution when moving the cart/apparatus 
combination to avoid injury from tip-over.

y

y

Unplug this apparatus during lightning 
storms or when unused for long periods of 
time.

y

y

Refer all servicing to qualified service 
personnel. Servicing is required when 
the apparatus has been damaged in any 
way, such as power-supply cord or plug is 
damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

y

y

Never touch this apparatus or antenna during 
a thunder or lightning storm.

TO REDUCE THE RISK OF ELECTRIC SHOCK 
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead 
symbol, within an equilateral triangle, 
is intended to alert the user to the 

presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of 
electric shock to persons.

The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important 

operating and maintenance (servicing) 
instructions in the literature accompanying 
the appliance.

WARNING

TO REDUCE THE RISK OF FIRE AND 
ELECTRIC SHOCK, DO NOT EXPOSE THIS 
PRODUCT TO RAIN OR MOISTURE.

CAUTION

Do not attempt to modify this product in 
any way without written authorization from 
LG Electronics. Unauthorized modification 
could void the user’s authority to operate this 
product.

 


background image

3

ENG

ENGLISH

y

y

When mounting a TV on the wall, make sure 
not to hang the TV by its power and signal 
cables.

y

y

Do not allow an impact shock or any objects 
to fall into the product, and do not drop 
objects onto the screen.

y

y

Keep the packing anti-moisture material or 
vinyl packing out of the reach of children. 
Anti-moisture material is harmful if 
swallowed. If swallowed by mistake, force 
the patient to vomit and visit the nearest 
hospital. Additionally, vinyl packing can 
cause suffocation. Keep it out of the reach of 
children.

y

y

CAUTION concerning the Power Cord  
It is recommended that appliances be 
placed upon a dedicated circuit; that is, a 
single outlet circuit which powers only that 
appliance and has no additional outlets or 
branch circuits. Check the specification page 
of this owner’s manual to be certain. Do not 
connect too many appliances to the same 
AC power outlet as this could result in fire or 
electric shock. Do not overload wall outlets. 
Overloaded wall outlets, loose or damaged 
wall outlets, extension cords, frayed power 
cords, or damaged or cracked wire insulation 
are dangerous. Any of these conditions could 
result in electric shock or fire. Periodically 
examine the cord of your appliance, and 
if its appearance indicates damage or 
deterioration, unplug it, discontinue use of 
the appliance, and have the cord replaced 
with an exact replacement part by an 
authorized service. Protect the power cord 
from physical or mechanical abuse, such as 
being twisted, kinked, pinched, closed in a 
door, or walked upon. Pay particular attention 
to plugs, wall outlets, and the point where 
the cord exits the appliance. Do not move 
the TV with the power cord plugged in. Do 
not use a damaged or loose power cord. Be 
sure do grasp the plug when unplugging the 
power cord. Do not pull on the power cord 
to unplug the TV.

y

y

Do not stick metal objects or any other 
conductive material into the power cord. Do 
not touch the end of the power cord while it 
is plugged in.

y

y

Warning

 - To reduce the risk of fire or 

electrical shock, do not expose this product 
to rain, moisture or other liquids. Do not 
touch the TV with wet hands. Do not install 
this product near flammable objects such 
as gasoline or candles, or expose the TV to 
direct air conditioning.

y

y

Do not expose to dripping or splashing and 
do not place objects filled with liquids, such 
as vases, cups, etc. on or over the apparatus 
(e.g. on shelves above the unit).

y

y

Grounding

(Except for devices which are not grounded.) 
Ensure that you connect the earth ground 
wire to prevent possible electric shock 
(i.e. a TV with a three-prong grounded AC 
plug must be connected to a three-prong 
grounded AC outlet). If grounding methods 
are not possible, have a qualified electrician 
install a separate circuit breaker. Do not try to 
ground the unit by connecting it to telephone 
wires, lightening rods, or gas pipes.

y

y

DISCONNECTING DEVICE FROM THE MAIN 
POWER

 

Mains plug is the disconnecting device. The 
plug must remain readily operable.

y

y

As long as this unit is connected to the AC 
wall outlet, it is not disconnected from the 
AC power source even if the unit is turned 
off.

y

y

Do not attempt to modify this product in any 
way without written authorization from LG 
Electronics. Unauthorized modification could 
void the user’s authority to operate this 
product.

 


background image

4

ENG

ENGLISH

y

y

ANTENNAS Outdoor antenna grounding 

(Can differ by country):  
If an outdoor antenna is installed, follow 
the precautions below. An outdoor antenna 
system should not be located in the vicinity 
of overhead power lines or other electric light 
or power circuits, or where it can come in 
contact with such power lines or circuits as 
death or serious injury can occur. Be sure the 
antenna system is grounded so as to provide 
some protection against voltage surges 
and built-up static charges. Section 810 of 
the National Electrical Code (NEC) in the 
U.S.A. provides information with respect to 
proper grounding of the mast and supporting 
structure, grounding of the lead-in wire to 
an antenna discharge unit, size of grounding 
conductors, location of antenna discharge 
unit, connection to grounding electrodes and 
requirements for the grounding electrode.  

Antenna grounding according to the National 
Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Antenna Discharge Unit

(NEC Section 810-20)

Grounding Conductor

(NEC Section 810-21)

Ground Clamps

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

Ground Clamp

Electric Service

Equipment

NEC: National Electrical Code

y

y

Cleaning

 

When cleaning, unplug the power cord and 
wipe gently with a soft cloth to prevent 
scratching. Do not spray water or other 
liquids directly on the TV as electric shock 
may occur. Do not clean with chemicals 
such as alcohol, thinners or benzine.

y

y

Moving 

Make sure the product is turned off, 
unplugged and all cables have been 
removed. It may take 2 or more people to 
carry larger TVs. Do not press or put stress 
on the front panel of the TV.

y

y

Ventilation 

Install your TV where there is proper 
ventilation. Do not install in a confined 
space such as a bookcase. Do not cover the 
product with cloth or other materials while 
plugged. Do not install in excessively dusty 
places.

y

y

If you smell smoke or other odors coming 
from the TV, unplug the power cord and 
contact an authorized service center.

y

y

Do not press strongly upon the panel with a 
hand or a sharp object such as a nail, pencil 
or pen, or make a scratch on it.

y

y

Keep the product away from direct sunlight.

y

y

Dot Defect 

The LCD panel is a high technology product 
with resolution of two million to six million 
pixels. In a very few cases, you could 
see fine dots on the screen while you are 
viewing the TV. Those dots are deactivated 
pixels and do not affect the performance and 
reliability of the TV.

y

y

Dot Defect 

The LCD panel is a high technology product 
with resolution of two million to six million 
pixels. In a very few cases, you could see 
fine dots on the screen while you’re viewing 
the TV. Those dots are deactivated pixels 
and do not affect the performance and 
reliability of the TV.

 


background image

5

ENG

ENGLISH

y

y

Generated Sound

“Cracking” noise: A cracking noise that 
occurs when watching or turning off the TV 
is generated by plastic thermal contraction 
due to temperature and humidity. This noise 
is common for products where thermal 
deformation is required.  
Electrical circuit humming/panel buzzing: A 
low level noise is generated from a high-
speed switching circuit, which supplies a 
large amount of current to operate a product. 
It varies depending on the product. 
This generated sound does not affect the 
performance and reliability of the product.

y

y

Take care not to touch the ventilation 
openings. When watching the TV for a long 
period, the ventilation openings may become 
hot. This does not affect the performance of 
the product or cause defects in the product.

y

y

If the TV feels cold to the touch, there may 
be a small “flicker” when it is turned on. This 
is normal, there is nothing wrong with TV. 
Some minute dot defects may be visible on 
the screen, appearing as tiny red, green, or 
blue spots. However, they have no adverse 
effect on the TV’s performance. Avoid 
touching the LCD screen or holding your 
finger(s) against it for long periods of time. 
Doing so may produce some temporary 
distortion effects on the screen.

DISPOSAL (Hg lamp only used in LCD TVs)

The fluorescent lamp used in this product contains 
a small amount of mercury. Do not dispose of this 
product with general household waste. Disposal of 
this product must be carried out in accordance to 
the regulations of your local authority.

Preventing “Image burn” or “Burn-in” on your TV screen

y

y

If a fixed image displays on the TV screen for 
a long period of time, it will be imprinted and 
become a permanent disfigurement on the 
screen. This is “image burn” or “burn-in” and is 
not covered by the warranty.

y

y

If the aspect ratio of the TV is set to 4:3 for a 
long period of time, image burn may occur on 
the letterboxed area of the screen.

y

y

Avoid displaying a fixed image on the TV screen 
for a long period of time (two or more hours for 
an LCD TV) to prevent image burn.

For USA

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system 
installer’s attention to Article 820-40 of the National 
Electrical Code (U.S.A.). The code provides 
guidelines for proper grounding and, in particular, 
specifies that the cable ground shall be connected 
to the grounding system of the building, as close 
to the point of the cable entry as practical.

 


background image

6

ENG

ENGLISH

Additional Information

The Owner’s Manual and Commercial Mode 
Setup Guide contain detailed information on the 
advanced features of these TVs. To view the 
extended documentation, visit our website at: 
www.lgsolutions.com/products. From the Products 
page, select 

TVs, Systems & Solutions

, then 

LCD 

TVs

, then the applicable TV. Click the 

Literature 

& Downloads

 tab at the bottom of the TV page, 

and select the required document(s) from the 
Downloads list.

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

TABLE OF CONTENTS

Additional Information

INSTALLATION PROCEdURE

ASSEMBLY ANd PARTS

Accessories

Rear Jack Panel

10 

Setting Up the TV

10 

- VESA Wall Mounting

11 

GENERAL TROUBLESHOOTING

13  OPEN SOURCE SOFTWARE NOTICE

FCC NOTICE 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:
-   Reorient or relocate the receiving antenna.
-   Increase the separation between the equipment and the receiver.
-  Connect the equipment to an outlet on a circuit different from that to which the receiver is 

connected.

-  Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interference and (2) this device must accept any 
interference received, including interference that may cause undesired operation of the device.
Any changes or modifications in construction of this device which are not expressly approved by the 
party responsible for compliance could void the user’s authority to operate the equipment.

 


background image

7

ENG

ENGLISH

INSTALLATION PROCEdURE

1

  Open the package and make sure all the accessories are included.

2

  Attach the stand to the TV set.

ASSEMBLY ANd PARTS

Accessories

Check your product box for the following items. If an accessory is missing, contact the dealer from whom 
you purchased the TV. Note: Accessories included may differ from the images below.

Quick Reference Guide

Power Cord

A/V adapter cable

(For 26LQ630H)

(For 22/26LQ630H)

(For 32LQ630H)

x 3

Protective bracket and 

screw for power cord

Cable holder

Cable holder

y

y

To ensure safety and product life span, do not use any unapproved items.

y

y

Any damages or injuries sustained due to use of unapproved items are not covered by the warranty. 

y

y

In the case of some models, the thin film on the screen is a part of TV and should not be removed.

 

CAUTION

y

y

The items supplied with your product will vary depending on the model.

y

y

Gently wipe any spots on the cabinet with a polishing cloth (included with some models).

y

y

When using a VGA (D-sub 15-pin signal cable) PC connection, use the shielded signal interface cable 
with a ferrite core to maintain standards compliance for the product.

y

y

Product specifications and/or manual contents subject to change without prior notice due to upgrade 
of product functions.

 

NOTE

 


background image

8

ENG

ENGLISH

22LQ630H series

26/32LQ630H series

Rear Jack Panel

Image shown may differ from your TV.

PILLOW SPEAKER

RGB IN (PC)

ANTENNA

IN

TV-LINK

CFG

AUDIO IN

(RGB/DVI)

SPEAKER

OUT(8Ω)

CPU SERVICE

(SERVICE ONLY)

PTC SERVICE

(SERVICE ONLY)

GAME CONTROL

/ M.P.I.

/DVI

 

IN 

 IN

1

2

USB IN

AUDIO/VIDEO

AV IN

RESET

UPDATE

.

1

.

7

.

5

.

2

.

3

12

.

8

11

10

13

.

9

.

6

USB IN 

1

AUDIO IN (RGB/DVI

)

AV IN

(AUDIO/VIDEO

)

RGB IN (PC

)

/DVI IN 1 

 IN 

2

SPEAKER OUT

8     

GAME CONTROL

/ M.P.I.

PILLOW SPEAKER

TV-LINK

CFG

PTC SERVICE

(SERVICE ONLY)

CPU SERVICE

(SERVICE ONLY)

ANTENNA IN

Healthcare Multimedia System

RESET
UPDATE

.

1

14

.

3

.

2

.

4

.

5

.

6

.

7

.

8

12

11

10

.

9

12

13

10

.

4

14

 


background image

9

ENG

ENGLISH

Jack

Description

1

Power Cord Socket

For operation with AC power.

Caution: Never attempt to operate the TV on DC power.

2

ANTENNA IN

Connect over-the air signals to this jack.

3

PTC SERVICE 

(SERVICE ONLY)

Used for PTC software updates.

4

CPU SERVICE 

(SERVICE ONLY)

Used for CPU software updates.

5

TV - LINK CFG

Computer input for programming Free To Guest services.

6

SPEAKER OUT 8

For use with external speakers.

7

GAME CONTROL

Input port for third party game Controllers.

M. P. I.

Allows VOD/PPV devices or set-top boxes to control the TV.

8

PILLOW SPEAKER

Used to connect to pillow speaker.

9

AUDIO IN (RGB/DVI)

1/8” headphone jack for analog PC audio input.

-

USB IN

Used for viewing multimedia files.

q

RGB IN (PC)

Analog PC Connection. Uses a D-sub 15-pin cable (VGA cable).

w

HDMI/DVI IN

Digital Connection.

Supports HD video and Digital audio.

Accepts DVI video using an adapter or HDMI to DVI cable (not included).

e

AV (Audio/Video) IN

Analog composite connection. Supports standard definition video only (480i).

Used for PC/DTV audio input jack. Use with A/V adapter cable provided

>

UPDATE

Software downloads and debug mode enable/ dis-able.

RESET

Hardware reset to PTC microcontroller.

 


background image

10

ENG

ENGLISH

Setting Up the TV

Refer to the appropriate section below to mount 
the TV on its stand or to a wall.

VESA Wall Mounting

y

y

LG recommends that wall mounting be 
performed by a qualified professional 
installer.

y

y

It is also recommended that you use an LG 
brand wall mount bracket when mounting 
the TV to a wall.

 

NOTE

1

  Install the protection cover provided with 

the TV to protect the area where the TV 
stand would otherwise be located. Press the 
protection cover into the TV until you hear it 
click.

2

  (Optional) Carefully attach a wall mount bracket 

to the rear of the TV.

3

  Install the wall mount bracket on a solid wall 

perpendicular to the floor. When you attach the 
TV to other building materials, please contact 
qualified personnel.

y

y

If installed on a ceiling or slanted wall, the 
TV may fall, which could result in severe 
personal injury.

y

y

Do not mount the TV to a wall while it is 
turned on. This may result in personal injury 
due to electric shock.

 

CAUTION

10 cm

10 cm

10 cm (4 inch)

10 cm

Make sure to use a wall mount bracket and 
screws that meet the VESA standard. Standard 
dimensions for wall mount kits are shown in the 
following table.

Model

22/26LQ630H

32LQ630H

VESA

100 x 100

200 x 100

Standard screw

M4

M4

Number of screws

4

4

Wall mount bracket 

(optional)

LSW100B, LSW100BG

 


background image

11

ENG

ENGLISH

GENERAL TROUBLESHOOTING

Installation

Symptom

Possible Cause(s)

Possible Solution(s)

Cannot direct enter 

channel number.

y

y

(TV in Pass-through Mode) Installer 

Menu item 028 CH. OVERIDE is set 

to 0, i.e., disabled (recommended 

setting).

y

y

If the channel lineup is locked, only channels 

that are active in the TV’s channel lineup can 

be selected. Set Installer Menu item 028 CH. 

OVERIDE to 1 to allow access for direct keypad 

entry to all channels.

y

y

(TV in FTG Mode) The channel entered 

is not part of the FTG Channel Map.

y

y

Channel access is restricted to channels 

included in the FTG Channel Map. If necessary, 

make changes to the FTG Channel Map using 

the FTG File Manager or the FTG Configuration 

Application, as appropriate.

No channels present after 

setup.

y

y

Auto Tuning (Channel Search) not run. 

y

y

Refer to Express Script or Custom Master TV 

Setup procedure, as appropriate. Auto Tuning 

must be run in order for the channel lineup 

to be populated. Note for Express Script: You 

must select “Execute Auto Search” in the Auto 

Search screen to run the search. To re-activate 

the Express Script, set Installer Menu item 117 

FACT DEFAULT to 001. 

Picture Reception and Sound

Symptom

Possible Cause(s)

Possible Solution(s)

No picture.

y

y

TV is turned OFF.

y

y

Turn TV ON.

y

y

Power failure?

y

y

Antenna/cable not connected.

y

y

Connect antenna/cable signal to TV.

y

y

Connections incorrect.

y

y

Check connections on TV.

y

y

MPI not connected

y

y

If applicable, connect MPI cable to MPI device.

y

y

Encrypted program.

y

y

Try another channel.

y

y

Wrong tuning band.

y

y

Adjust Installer Menu settings.

Normal picture, poor or 

no sound.

y

y

Broadcast problem.

y

y

Try a different channel.

y

y

Audio muted

y

y

Press MUTE or use Volume Up key to increase 

sound level.

y

y

Pillow/TV speaker not configured 

properly.

y

y

Check that Installer Menu items 020 FEATURE 

LEVEL and 027 HOSPITAL MODE are set as 

required. Also, if applicable, select TV Speaker in 

the Audio Menu.

Erratic Operation

Symptom

Possible Cause(s)

Possible Solution(s)

Installer Menu setup.

y

y

Wrong Installer Menu settings.

y

y

Adjust Installer Menu settings as required.

 


background image

12

ENG

ENGLISH

Installer Remote

Symptom

Possible Cause(s)

Possible Solution(s)

Remote doesn’t work.

y

y

Remote not in TV Mode.

y

y

Use MODE key to select “TV”; puts remote into 

TV Mode.

y

y

Not aimed at IR remote sensor. 

y

y

Point remote at TV’s IR receiver on TV.

y

y

Remote too far from IR sensor. 

y

y

Move remote closer to TV’s IR receiver or darken 

room.

y

y

MPI not connected. 

y

y

If applicable, connect MPI cable to MPI device.

y

y

IR path to TV’s receiver obstructed. 

y

y

Remove obstructions.

y

y

Weak batteries. 

y

y

Replace batteries.

y

y

Wrong battery polarity. 

y

y

Check that “+” and “-” match in battery 

compartment.

y

y

Too much light in room. 

y

y

Dim room light.

y

y

Wrong Installer Remote. 

y

y

Requires compatible Installer Remote. Contact 

your LG dealer.

y

y

Bed Switch set to wrong bed.

y

y

Set Bed Switch or update Installer Menu, as 

necessary.

 


background image

13

ENG

ENGLISH

The following GPL executables and LGPL libraries 

used in this product are subject to the GPL2.0/

LGPL2.1/MPL1.1 License Agreements:

GPL EXECUTABLES: 

Linux kernel 2.6, busybox, lzo, mtd-utils, udhcpc

LGPL LIBRARIES: 

uClibc, DirectFB, iconv

MPL LIBRARIES: 

Nanox

The LG Electronics Open Source Distribution 

website provides access to open source code. 

Please visit opensource.lge.com for further 

information. 

This offer is valid for a period of three (3) years 

from the date of the distribution of this product by 

LG Electronics. 

You can obtain a copy of the GPL, LGPL, MPL 

licenses on the CD-ROM provided with this 

product.

This product includes:

boost C++

y

y

Copyright © Beman Dawes 1999-

2003

Chromium

y

y

Copyright © 2008, The Chromium 

Authors

DTOA

y

y

Copyright © 1991, 2000, 2001 by 

Lucent Technologies

Expat

y

y

Copyright © 2006 expat maintainers.

Freetype

y

y

Copyright © 2003 The FreeType 

Project (www.freetype.org).

Libjpeg

y

y

This software is based in part on 

the work of the Independent JPEG 

Group copyright © 1991 – 1998, 

Thomas G. Lane.

Libpng

y

y

Copyright © 2004 Glenn Randers-

Pehrson

Tinyxml

y

y

Copyright © 2000-2006 Lee 

Thomason

OpenSSL

y

y

Cryptographic software written by 

Eric Young (eay@cryptsoft.com).

y

y

Software written by Tim Hudson 

(tjh@cryptsoft.com).

y

y

Software developed by the OpenSSL 

Project for use in

y

y

The OpenSSL Toolkit. (http://www.

openssl.org)

Portmap

y

y

Copyright © 1990 The Regents of 

the University of California

Zlib

y

y

Copyright © 1995-2002 Jean-loup 

Gailly and Mark Adler.

libcurl

y

y

Copyright ®oe 1996 - 2008, Daniel 

Stenberg.

net-snmp

y

y

Copyright 1989, 1991, 1992 by 

Carnegie Mellon University 

Derivative Work - 1996, 1998-2000

y

y

Copyright 1996, 1998-2000 The 

Regents of the University of 

California

y

y

Copyright ®oe 2001-2003, Networks 

Associates Technology, Inc

y

y

Copyright ®oe 2001-2003, 

Cambridge Broadband Ltd.

y

y

Copyright ®oe 2003 Sun 

Microsystems, Inc., 4150 Network 

Circle, Santa Clara, California 95054, 

U.S.A.

y

y

Copyright ®oe 2003-2009, Sparta, 

Inc

y

y

Copyright ®oe 2004, Cisco, Inc and 

Information Network

y

y

Center of Beijing University of Posts 

and Telecommunications.

y

y

Copyright ®oe Fabasoft R&D 

Software GmbH & Co KG, 2003 

oss@fabasoft.com Author: Bernhard 

Penz

y

y

Copyright ®oe 2007 Apple Inc.

y

y

Copyright ®oe 2009, ScienceLogic, 

LLC

This product includes the open souce software 

program “Net- SNMP”which applies the terms 

and conditions provided by owner of the copyright 

to the “Net-SNMP”. 

(http://www.netsnmp.org/about/license.html)

All rights reserved.

Permission is hereby granted, free of charge, to 

any person obtaining a copy of this software and 

associated documentation files (the “Software”), 

to deal in the Software without restriction, 

including without limitation the rights to use, copy, 

modify, merge, publish, distribute, sublicense, 

and/or sell copies of the Software, and to permit 

persons to whom the Software is furnished to do 

so, subject to the following conditions:

THE SOFTWARE IS PROVIDED “AS IS”, 

WITHOUT WARRANTY OF ANY KIND, EXPRESS 

OR IMPLIED, INCLUDING BUT NOT LIMITED 

TO THE WARRANTIES OF MERCHANTABILITY, 

FITNESS FOR A PARTICULAR PURPOSE AND 

NONINFRINGEMENT. IN NO EVENT SHALL 

THE AUTHORS OR COPYRIGHT HOLDERS 

BE LIABLE FOR ANY CLAIM, DAMAGES OR 

OTHER LIABILITY, WHETHER IN AN ACTION OF 

CONTRACT, TORT OR OTHERWISE, ARISING 

FROM, OUT OF OR IN CONNECTION WITH THE 

SOFTWARE OR THE USE OR OTHER DEALINGS 

IN THE SOFTWARE.

OPEN SOURCE SOFTWARE NOTICE

 


background image

 


background image

 


background image

The model and serial numbers of the TV are 

located on the back and/or one side of the TV.

Record them below should you ever need service.

MODEL

SERIAL

Register your product Online!

LG Customer Information Center

For inquires or comments, visit 

www.lg.com

 or call:

www.lg.com

1-888-865-3026
1-888-542-2623

USA, Commercial User

CANADA

Pro:Centric is a trademark of LG Electronics U.S.A., Inc. Pro:Idiom is 
a registered trademark of Zenith Electronics LLC. 

b-LAN is a 

trademark of LodgeNet Interactive Corporation. All other trademarks 
or registered trademarks are the property of their respective owners.

This product qualifies for ENERGY STAR in the  

“factory default (Home Use)” setting.
Changing the factory default settings or enabling other 

features may increase power consumption that could 

exceed the limits necessary to quality for ENERGY STAR.