PDF User Manual

  1. Home
  2. Manuals
  3. LFA Tablet Presses TABLET DEDUSTER User Manual

LFA Tablet Presses TABLET DEDUSTER User Manual

Made by: LFA Tablet Presses
Type: User Manual
Category: Industrial Equipment
Pages: 3
Size: 0.15 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

TABLET DEDUSTER

USER MANUAL

LFA Tablet Presses is a trading name of 

LFA Machines Oxford LTD

All of the content in this document is covered by copyright ©


background image

CONTENTS

Page 1. 

Introduction

Page 1. 

Technical Specifications 

Page 2. 

Fig. 1 Structure

Page 3. Installation

Page 3. Operation

Page 4. Cleaning 

LFA Machines Oxford LTD ©

LFA Machines Oxford LTD ©

Introduction

The Tablet Deduster is a dedicated machine for the removal of dust residues from tablets after 

pressing. Able to process more than half a million tablets an hour, it can be connected to most 

tablet presses and ensures clean, professional looking tablets that are free of unsightly powder 

traces.

The Tablet Deduster is a modern, highly specified design whose advantages include better effi-

ciency, better dust removal, lower noise and easy maintenance. 

NOTE:  Please read these instructions carefully before first use.   

1

Fig. 1 Structure

A - Tablet inlet

B - Concave channel 

C- Compressed air nozzle

D - Dust pipe

E – Tablet outlet

2

Capacity

550,000pcs/hour

Power 

~220V 50HZ 

Dimension 

(Φ315m-

m~Φ350mm~) ×( 

900mm~1070)

Weight 

38kg

Vacuum 

1.8m²/min-0.01MPa

Compressed air

20Pa

Technical Specifications


background image

The Tablet Deduster should be installed on stable flooring in a dry, well ventilated environment 

that has a suitable power supply. 

Ensure that the three compressed air nozzles are aligned with the three dust holes.

NOTE: The base can be turned to 360 degrees, but cannot rotate continuously.

Ensure the screw is tightened to avoid the machine making a noise. 

Press Switch “A” to turn on.

Turn knob “B” clockwise to set then speed to your requirement.

Start your tablet press.

When finished, set knob “B” to “zero” and switch off the power.

LFA Machines Oxford LTD ©

LFA Machines Oxford LTD ©

To clean the Tablet Deduster, remove component parts as follows:

 

1. 

Detach the compressed air pipe and dust pipe

 

1. 

Turn off A and remove B

 

1. 

Separate filter disc combination C and its cover, D

 

1. 

Take off rubber ring E and disc F

 

1. 

Loosen G to detach H

 

1. 

Detach I

 

1. 

Take out K by detaching J

NOTE: When cleaning the lower section do not use a direct stream of water

as this will cause damage.

If the machine becomes noisy or slows, detach the ring and tighten the screws. 

Clean A, B, C, D, E, H and I with neutral detergent then rinse thoroughly.

Clean C, F, G, J and K with water or alcohol.   

Use gauze dipped with water or alcohol to clean L, M, N and base. Do not wash directly with 

a free stream of water as this will damage the machine.

Air dry the parts before reassembling.

4

3

Installation

Operation

Cleaning