PDF User Manual

  1. Home
  2. Manuals
  3. LEXIN LX-R3 User Manual

LEXIN LX-R3 User Manual

Made by: LEXIN
Type: User Manual
Category: Motorcycle Accessories
Pages: 16
Size: 0.65 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

LX-R3 BLUETOOTH INTERPHONE

 

 
 

USER MANUAL 

 

 

 

   

 

 

LX-R3 

 

Motorcycle 3 Rider 1000M Bike-to-Bike 

Bluetooth Wireless Telecom, Intercom 

Navigation & Stereo Headset 

 

 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

Table of Contents: 

Introduction…………………………………………….....Section 1 

Package Contents…………………………...…………… Section 2 

Installation Instruction………………………………….. Section 3 

General Operation Instruction…………………………. Section 4 

-

 

Powering On/Off & Charging……………………... Section 4A 

-

 

Pairing The LX-R3 With The Bluetooth Device…...Section 4B 

Controls and Functions.…………………………………. Section 5 

Maintenance & Care…………………………………….. Section 6 

Disposal…………………………………………..………. Section 7 

Certification And Safety Approvals…………………….. Section 8 

Warranty………………………………… ….……….….. Section 9 

Waiver And General Release…………….……………...Section 10 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

1.

 

Instruction 

Thank you for choosing the LX-R3, Motorcycle 3 Rider 1000M full-duplex stereo 
Bluetooth wireless helmet headsets, designed for installation into most open-face, 
flip-front and full-face style helmets.   
With the LX-R3, you can call hands-free on your Bluetooth mobile phone, listen to 
stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and 
have intercom conversations in full duplex with a passenger or multi-pair up to 3 
riders in a small group and talk between any 2 of them in a range of 1000M (3,280 
feet) distance.   
The LX-R3 is compliant with the Bluetooth Specification v2.1 supporting the 
following profiles: Headset Profile, Hands-Free Profile (HFP), Advanced Audio 
Distribution Profile (A2DP). Please check with the manufacturers of other devices to 
determine their compatibility with this headset. 
Superior audio fidelity has been achieved with our wide-fidelity, non-ported and 
ultra-slim helmet speakers. This headset also provides the industry's best combination 
of wind and ambient noise reduction with the miniature boom microphone. 
Main unit is powered by a rechargeable Lithium Ion/Polymer power cell providing 
8-12 hours of use from a full charge. 
Please read this user manual carefully before using the headset. 

 

 

 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

2. Package Contents

 

• LX-R3 Main Unit * 2   

 

• Slim 5mm Hi-Fi Stereo Speaker * 2 
• Boom & Velcro Microphone for both full-face and open-face style helmet * 2 

 

• Mounting Bracket & Clamp * 2 

 

 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

• DC Power Charger * 2 
• USB Cable * 2 

 

• 3.5mm Audio Cable * 2 

 

• User Manual 

 

 

3. Installation Instruction

 

3.1 Insert the back plate of the clamp between the internal padding and external shell 
of the helmet, then attach the front bracket in the proper position on the left bottom 
edge of the helmet and tighten the clamp with the supplied screws.   

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

 

 

       

Mount bracket on helmet                     

Note: 

If  the  shell  of  your  helmet  is  a  little  thick,  you  could  put  the  Spacer  in  the  middle  of  the 

clamp.

 

Or 

y

ou may use the sticker style mounting bracket to hold the main unit on some special 

large size helmet or the half helmet. 

 

           

 

             

  Front                                                    Back 

3.2 Locate an area in the nose section just to the left of center to mount the 
microphone. While you are using the open-face helmet, please adjust the direction of 
the microphone so that the triangular mark on the microphone is pointing towards 
your mouth.   

 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

3.3 Place the speakers into the cheek pads. Push the speakers and microphone firmly 
against the Velcro pads. 

 

 
3.4 Push the wires into the gap between the helmet liner and shell.   
 
3.5 Mount the LX-R3 main unit on the bracket, and slide it into the L-shape hole.

 

     

Main unit on a helmet 

 
3.6 Plug the headset into the main unit. 

 

 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

4. General Operation Instruction:

 

4A. Powering On/Off & Charging

 

• Powering On 

Press & hold the Power/Interphone Button for about 6 seconds to power on. The blue 
LED turns on. 

• Powering Off 

Just short press the Reset Button for quick power off, or press and hold the 
Power/Interphone Button for about 6 seconds to power off. The blue LED will stop 
blinking but keep on, then release the button. 

• Charging 

The LED turns on red while charging, and turns to blue when the headset is fully 
charged. It takes about 2.5 hours to be completely charged. 
 
 

4B. Pairing The LX-R3 With The Bluetooth Device

 

Before using the LX-R3 Bluetooth headset with any of Bluetooth devices for the first 
time, you need to do the pairing operation. It can be paired with Bluetooth mobile 
phones, Bluetooth audio devices such as MP3 or GPS, and with other LX-R3 
Bluetooth headsets. This pairing operation is only required once for each Bluetooth 
device, and the headset will remain paired with the devices and automatically 
connects to the paired devices again when they are within range. 

 
• Pairing Mobile Phone   

1. Press & hold the Power/Interphone Button for about 8 seconds until the LED 
flashes red and blue alternately. 
2. Search for Bluetooth devices on your mobile phone. The headset will be listed on 
your mobile phone as Motor Phone. 
3. Enter 0000 for the PIN 
4. Your mobile phone will confirm that pairing is complete. Then only the blue LED 
blinks every 5 seconds. 
 

• Pairing A Stereo Bluetooth Adaptor 

1. Turn on audio source and prepare Stereo Bluetooth Adaptor for pairing 
2. Put LX-R3 main unit in Bluetooth pairing mode (see above) 
3. Turn on or plug in Stereo Bluetooth Adaptor 
4. Audio source will automatically start playing though LX-R3 main unit when 
pairing is complete 

 

 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

• Pairing Bluetooth GPS navigation 

1. You can listen to Bluetooth voice instructions from a Bluetooth GPS navigation. 
2. The paring procedure is the same with the procedure of “Pairing Mobile Phone”. 
3. Please refer to the manual of the Bluetooth GPS navigation for details. 
 

• Pairing with other LX-R3 headsets for Intercom conversation 

The LX-R3 can be paired with up to two other headsets for a small group Bluetooth 
Intercom conversation. 
1. Turn on the two headsets (A and B) that you would like to pair with each other.   
2. Press and hold the Power/Interphone Button of both headsets for 6 seconds until the 
LED flashes red and blue alternately. 
3. Short press the Power/Interphone Button of either headset A or B (It doesn’t matter 
that you choose A or B) and wait until the LEDs of both headsets turn to blue blinking 
and intercom connection is automatically established. (Headset A is paired with 
Headset B) 
4. You can make other pairings between the headset A and C, and between the 
headset B and C by following the same procedure as above. (Headset A is paired with 
Headset C and Headset B is paired with Headset C) 
5. Three headsets are completely multi-paired as a small group and switch to talk 
between each 2 of them in a range of 1000M (3,280 feet) distance. 
 

Note: 

Please make sure that during the pairing procedure, only two headsets are in 

power on status, and the 3

rd

 one is in power off status.   

 
 
 

5. Controls and Functions

 

5.1 Volume Adjustment 

You can easily adjust the volume by short pressing Volume - & Volume + Button. 
You will hear a beep when the volume reaches maximum or minimum level. 
 

5.2 Safe Mobile Phone Call Answering And Making 

5.2.1. When you have an incoming call, you can wait 3-5 seconds and the headset will 
answer the call automatically. Or you can simply short press the Phone/Play Button to 
answer the call. 
5.2.2. To reject a call, press & hold the Phone/Play Button for 2 seconds while the 
phone is ringing. 
5.2.3. There are several ways to make a phone call: 
- Enter number on your mobile phone keypad and tap the Phone Button. The call is 
automatically transferred to the headset. 
- To redial the last number, press & hold the Phone/Play Button for 2-3 seconds. 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

5.2.4. To terminate the phone call, short press the Phone/Play Button. 

Note: 

In some case (e.g. high power RF radio influence or metal block), the headset 

will be disconnected from the cell phone, please short press the Phone/Play Button to 
reconnect them.   

 

5.3 Intercom Conversation 

5.3.1. You can start an intercom conversation with the other Intercom Riders by 
pressing the Power/Interphone Button. 
5.3.2. To terminate an intercom conversation, short press again the Power/Interphone 
Button.   
5.3.3. When in 3 rider small group conversation, to start an intercom conversation, 
short press the Power/Interphone Button on Headset A to talk with Headset B. While 
if the Headset A want to talk with Headset C, press & hold the Power/Interphone 
Button until you hear a beep ”du-du”, promptly release your hand, then it will connect 
with the Headset C.   

Note:

 For these 3 paired headsets, only two headsets could be set as master units, and 

the third one is slave unit and cannot start an intercom conversation, when one of the 
master unit switch to talk with the third(slave) unit, the third(slave) unit will become 
master unit. 

5.3.4. When you try to start an intercom conversation with an Intercom rider who is 
already having an intercom conversation or a mobile phone call with another person, 
you can’t make it and will hear low tone double beep as a busy signal. In this case, 
you have to try again later. 
5.3.5. If your Intercom rider goes out of range while having an intercom conversation, 
you may hear static noise and eventually the intercom will be disconnected. In this 
case, the LX-R3 automatically tries to reconnect the intercom every 8 seconds and 
you will hear high tone double beeps until the intercom is reestablished. If you don’t 
want to make a reconnection, short press the Power/Interphone Button to stop the 
attempt

.

 

 
5.4 Stereo Music 

You can listen to stereo music in either way: by Bluetooth wireless stereo or with the 
enclosed stereo audio cable. 

• By Bluetooth Wireless Stereo 

The Bluetooth audio device must be paired with the LX-R3 by following the 
Bluetooth Audio Device Pairing instructions described in the previous chapter. The 
LX-R3 supports the Advanced Audio Distribution Profile (A2DP), so if your 
Bluetooth audio device also supports the A2DP, you can use the LX-R3 to remotely 
control music playback. You may not only adjust the volume but also use the 
functions such as play & pause. 
- Press Volume + or Volume – Button to adjust the volume 
- Press Phone/Play Button to play/pause the music 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

 

• By Stereo Audio Cable

 

Plug your stereo MP3 player directly to the LX-R3 by using the enclosed 3.5mm 
audio cable. You may adjust the volume and control the music playback on the MP3 
player. 
 

5.5 Function Priority 

The LX-R3 operates in the following order of priority: 

(highest) 

mobile phone, 

Intercom, 

(lowest) 

Bluetooth stereo music 

A lower priority function is always interrupted by a higher priority function. For 
example, stereo music is interrupted by intercom call, and intercom conversation is 
interrupted by incoming mobile phone call. 
 

5.6 Reset 

When the LX-R3 is not working properly or is in faulty status with any reason, you 
may reset by pressing the Reset Button on the headset main unit. The LX-R3 will be 
switched off and you have to turn on and try to use again.   
 
 

6. Maintenance & Care

 

The LX-R3 should be treated with care and the following suggestions will help you 
protect your warranty coverage. 
6.1. Do not use or store the device in dusty, dirty areas. Its moving parts and 
electronic components can be damaged. 
6.2. Do not store the device in hot areas. High temperatures can shorten the life of 
electronic devices, damage batteries, and wrap or melt certain plastics. 
6.3. Do not store the device in cold areas. When the device returns to its normal 
temperature, moisture can form inside the device and damage electronic circuit 
boards. 
6.4. Do not attempt to open the LX-R3. 
6.5. Do not drop or knock the device. Rough handling can break internal circuit 
boards and fine mechanics. 
6.6. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the 
device. 
6.7. Do not paint the device. Paint can clog the moving parts and prevent proper 
operation. 
These suggestions apply equally to the headset main unit, speaker-microphone clamp 
unit, or power charger. 
 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

 

7. Disposal

 

The crossed-out wheel bin symbol on the product, literature, or packaging reminds 
you that all electrical and electronic products, batteries, and accumulators must be 
taken to separate collection at the end of their working life. This requirement applies 
to the European Union and other locations where separate collection systems are 
available. To prevent possible harm to the environment or human health from 
uncontrolled waste disposal, please do not dispose of these products as unsorted 
municipal waste, but hand it in at an official collection point for recycling. 
 
 

8. Certification And Safety Approvals

 

• FCC Compliance Statement 

This device complies with part 15 of the FCC Rules. Operation is subject to the 
following two conditions: 
- This device may not cause harmful interference, and 
- This device must accept any interference received, including interference that may 
cause undesired operation. 
 
This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 
- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 
- Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected. 
- Consult the dealer or an experienced radio/TV technician for help. 
 

• FCC RF Exposure Statement 

The antenna(s) used for this device must be installed to provide a separation distance 
of at least 20 cm from all persons and must not be co-located or operating in 
conjunction with any other antenna or transmitter. 
 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

 

• FCC Caution 

Any changes or modifications to the equipment not expressly approved by the party 
responsible for compliance could void user’s authority to operate the equipment. 
 

• CE Declaration of Conformity 

This product is CE marked according to the provisions of the R&TTE Directive 
(99/5/EC). Hereby, LEXIN declares that this product is in compliance with the 
essential requirements and other relevant provisions of Directive 1999/5/EC.   
 
 

9. Warranty 

LEXIN warrants that this product shall conform to and perform in accordance with 
published technical specifications and the accompanying written materials, and shall 
be free of defects in materials and workmanship, for a period of one (1) year from the 
date of purchase by the first consumer purchaser of the Product. The limited warranty 
extends only to the original consumer purchaser of the Product and is not assignable 
or transferable to any subsequent purchaser/end-user. 
This warranty is limited to the repair and/or replacement, at LEXIN’s discretion, of 
defective or non-conforming Product, and LEXIN shall not be responsible for the 
failure of the Product to perform specified functions, or any other non- conformance 
caused by or attributable to: (a) any misapplication or misuse of the Product; (b) 
failure of Customer to adhere to any of LEXIN’s specifications or instructions; (c) 
neglect of, abuse of, or accident to, the Product; or (d) any associated or 
complementary equipment or software not furnished by LEXIN. 
Limited warranty service may be obtained by delivering the Product to LEXIN or to 
the international distributor it was purchased through and providing proof of purchase 
or receipt date. Customer agrees to insure the Product or assume the risk of loss or 
damage in transit, to prepay shipping charges to LEXIN, and to use the original 
shipping container or equivalent. 
 
 

10. Waiver And General Release 

 

By using the Product, you will waive substantial legal rights including the right to use. 
Please read the following carefully before using the device. By using the Product you 
agree to be bound to this agreement and forfeit the right to sue.   

By using the Product, you are irrevocably releasing, indemnifying from any liability, 
loss, claim and expense (including attorneys fees) and holding Lexin harmless for any 
bodily injuries, harm or death as well as losses or damages in goods, to any vehicles 
including your own, or to any property or asset that belong to you or to third parties, 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

any of which may result from using the Product under any circumstances or 
conditions and irrespective of jurisdiction.   
10.1. You, your heirs, legal representatives, successors or assigns, hereby voluntarily 
and forever release, discharge, indemnify and hold harmless Lexin from any and all 
litigation, claims, debts, demands, actions and liability which may arise, directly or 
indirectly, from using the Product for any distress, pain, suffering, discomfort, loss, 
injury, death, damages to or in respect to any person or property however caused, 
WHETHER ARISING FROM THE NEGLIGENCE OR OTHERWISE, and which 
may hereafter accrue to you on some future date as a result of said use, to the fullest 
extent permitted by law.   
10.2. You fully understand and assume the risks in using the Product, including risk 
of negligent acts or omissions by others. All risks for operating the Product are 
assumed solely by the user of the Product.   
10.3. You confirm that you are physically capable to use the Product and that you 
have no medical conditions or needs that may infringe upon your abilities to do so in a 
safe manner. You confirm that you are at least eighteen (18) years of age and that you 
have been advised of the risks associated with the use of the Product. You further 
confirm that you will not consume any alcohol that may affect your alertness or any 
mind-altering substance, and will not carry, use or consume these substances before or 
during the use of the Product.   
10.4. You fully acknowledge our warnings and understand that:   
(a) risks and dangers exist in using the Product while in traffic, including but not 
limited to injury or illness, strains, fractures, partial and/or total paralysis, death or 
other ailments that could cause serious disability;   
(b) these risks and dangers may be caused by the negligence of the manufacturers or 
its agents or any third party involved in designing or manufacturing the Product;   
(c) these risks and dangers may arise from foreseeable or unforeseeable causes.   
You hereby assume all risks and dangers and all responsibility for any losses and/ or 
damages, whether caused in whole or in part by the negligence or other conduct of 
others, including Lexin.   
10.5. By using the Product, you confirm that you have read this release of liability and 
fully understand and accept its terms and conditions. 
 
 
 
 
 
 
 
 
 
 

 


background image

LX-R3 BLUETOOTH INTERPHONE

 

 

 

 

 

LX-R3   

Motorcycle 3 Rider 1000M Bluetooth Interphone

 

 

           

         

   

 

 

DECLARATION OF CONFORMITY (DOC) 

THIS DEVICE IS COMPLIANT WITH AND ADOPTS THE 

BLUETOOTH SPECIFICATION 2.1 AND HAS SUCCESSFULLY 

PASSED ALL INTEROPERABILITY TESTS THAT ARE SPECIFIED IN 

THE BLUTOOTH SPECIFICATION 

INTEROPERABILITY BETWEEN THIS DEVICE AND OTHER 
BLUETOOTH ENABLED PRODUCTS IS NOT GUARANTEED 

 

WARNING 

PLEASE CHECK ALL LOCAL LAWS AND REGULATIONS 

REGARDING THE USE OF IN-HELMET SPEAKERS WHILE 

OPERATING MOTORIZED VEHICLES

 

 


background image

LX-R3 BLUETOOTH INTERPHONE