PDF User Manual

  1. Home
  2. Manuals
  3. LEXIBOOK RCD102series Instruction Manual

LEXIBOOK RCD102series Instruction Manual

Made by: LEXIBOOK
Type: Instruction Manual
Category: CD Player
Pages: 12
Size: 1.11 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

MODE D’EMPLOI

INSTRUCTION MANUAL

RCD102series

RADIO CD PLAYER

Radio Lecteur CD

RCD102seriesIM1084_19Feb_V10.indd   1

19/02/2014   3:14 PM

 


background image

2

1

2 3 4 5

6 7

8

11

12

9

10

13

18

14 15

16

19

20

21

17

RCD102seriesIM1084_19Feb_V10.indd   2

19/02/2014   3:14 PM

 


background image

11

English

11

SAFETY PRECAUTIONS

!

!

CAUTION:

 TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER 

(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

WARNING:

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

• The apparatus shall not be exposed to dripping or splashing and that no objects filled with 

liquids, such as vases, shall be placed on the apparatus.

• The mains plug is used as the disconnect device, the disconnect device shall remain readily 

operable.

• In order to disconnect the apparatus from the mains completely, the mains plug should be 

disconnected from the mains socket outlet completely.

The graphic symbols at the bottom of the set mean the following:

DANGEROUS VOLTAGE:

 The lightning flash with arrowhead symbol 

within an equilateral triangle is intended to alert the user to the presence of 

uninsulated “dangerous voltage” within the product’s enclosure that may be of 

sufficient magnitude to constitute a risk of electric shock to persons.

ATTENTION: 

The exclamation point within an equilateral triangle is intended 

to alert the user to the presence of important operating and maintenance 

(servicing) instructions in the literature accompanying the appliance.

DANGER:

 Invisible and hazardous laser radiation when open and interlock 

failed or defeated. Avoid direct exposure to beam.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DANGER

LASER SAFETY

This unit employs an optical laser beam system in the CD mechanism, 

designed with built in safeguards. Do not attempt to disassemble, refer to 

qualified service personnel. Exposure to this invisible laser light beam may be 

harmful to the human eye.

THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, 

OR ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE 

SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER 

LIGHT BEAM EXPOSURE.

Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to 

laser beam.

RCD102seriesIM1084_19Feb_V10.indd   11

19/02/2014   3:14 PM

 


background image

12

English

12

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions

5. Do not use this product near water and moisture, for example: near a bathtub, washbowl, 

kitchen sink or laundry tub; in a wet basement; or near a swimming pool.

6. Clean only with a dry cloth. Unplug this product from the wall outlet before cleaning. Do 

not use liquid cleaners or aerosol cleaners. It may damage the screen.

7. Do not block any ventilation openings. Install in accordance with manufacturer’s 

instructions. 

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized 

plug has two blades with one wider than the other. A grounding type plug has two blades 

and a third grounding prong. The wide blade or the third prong is provided for your safety. If 

the provided plug does not fit into your outlet, consult an electrician for replacement of the 

obsolete outlet.

10.The socket-outlet shall be installed near the equipment and shall be easily accessible.

11. Protect the power cord from being walked on or pinched particularly at plugs, 

convenience receptacles, and the point where they exit from the apparatus.

12. Only use attachments/accessories specified by the manufacturer. 

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power-supply cord or plug is damaged, 

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been 

exposed to rain or moisture does not operate normally, or has been dropped.

15. Do not overload wall outlet. Use only power source as indicated.

16. Use replacement parts as specified by the manufacturer.

17. Never push objects of any kind into this product through openings as they may touch 

dangerous voltage points or short out parts that could result in fire or electric shock. Never 

spill or spray any type of liquid on the product.

18. The product may be mounted to a wall only if recommended by the manufacturer.

19. Upon completion of any service or repairs to this product, ask the service technician to 

perform safety checks.

20. Only use with the cart, stand, tripod, bracket or table specified by the manufacturer or 

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus 

combination to avoid injury from tip-over.

21. The apparatus should be operated only from the type of power source indicated on the 

marking label. If you are not sure of the type of power supply to your home, consult your 

appliance dealer or local power company. For apparatus intented to operate from battery 

power, or other sources, refer to the operating instructions.

22. Do not attempt to service the apparatus yourself as opening or removing covers may 

expose you to dangerous voltage or other hazards. Refer all servicing to qualified service 

personnel.

23. The apparatus shall not be exposed to dripping or splashing and no object filled with 

liquids, such as vases, shall be placed on the apparatus.

RCD102seriesIM1084_19Feb_V10.indd   12

19/02/2014   3:14 PM

 


background image

13

English

13

UNPACKING THE DEVICE

POWER SOURCES

When unpacking, ensure that the following elements are included:

1 x Boombox CD Player

1 x AC cable

1 x Instruction manual

WARNING:

 All packaging materials, such as tape, plastic sheets, wire ties and tags are not 

part of this product and should be discarded.

The Radio CD Player operates on AC 230V ~ 50Hz or with 6 x 1.5V 

 C/LR14 size 

batteries (not included).

AC operation

1. Check that the unit is switched off.

2. Insert the small end of the AC cord into the AC socket at the back of the unit.

3. Plug the other end of the AC cord into any convenient mains power socket.

4. STANDBY Indicator is light up in half brightness and unit is in standby mode. 

Battery installation

1. To install the batteries, open the battery compartment located at 

the back of the unit by pressing in on the tabs, then lifting it off. 

2. Insert 6 x 1.5V 

 C/LR14 size batteries (not included) observing 

the polarity indicated in the compartment, and as per the diagram 

shown opposite. 

3. Close the battery compartment. 

4. STANDBY Indicator is light up in half brightness and unit is in 

standby mode.

Note:

 The AC power cord must be disconnected from the AC socket on the rear of the unit in 

order for the product to operate on battery power.

24. Mains plug is used as disconnect device and it should remain readily accessible during 

intented use. In order to disconnect the apparatus from the mains completely, the mains plug 

should be disconnected from the main socket outlet completely.

25. Minimum distance 10 cm around the apparatus for sufficient ventilation.

26. No naked flame sources such as lighted candles should be placed on the apparatus.

27. Attention should be drawn to the environmental aspects of battery disposal.

28. Use the apparatus in moderate climates.

29. Excessive sound pressure from earphones and headphones can cause hearing loss.

30. Maximum output voltage: ≤ 150mV.

31. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

32. Caution marking is located at the bottom of the apparatus.

33. The marking information is located at the bottom of the apparatus.

RCD102seriesIM1084_19Feb_V10.indd   13

19/02/2014   3:14 PM

 


background image

14

English

14

WARNING:

 Malfunction or loss of memory may be caused by strong frequency interference 

or electrostatic discharge. Should any abnormal function occur, remove the batteries and 

insert them again, or unplug the unit from the mains socket and re-plug it again.

Unit will automatically go to standby mode after 15 minutes without operation.

To resume operation, simply press the STANDBY button to turn on the unit.

CARE AND MAINTENANCE

POWER MANAGEMENT FUNCTION

Caring for compact discs

• Treat the disc carefully. Handle the disc only by its edges. Never 

allow your fingers to come in contact with the shiny, unprinted side of 

the disc. 

• Do not attach adhesive tape, stickers, etc. to the disc label.

• Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive 

cleaners to clean the disc. If necessary, use a CD cleaning kit.

• If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged 

(scratched).

• When cleaning the disc, wipe in straight lines from the 

centre of the disc to the outer edge of the disc. Never 

wipe in circular motions. 

• This unit is designed to play only compact discs bearing 

the identification logo as shown here. Other discs may not 

conform to the CD standard and may not play properly.

• Discs should be stored in their cases after each use to avoid damage.

• Do not expose discs to direct sunlight, high temperatures or dust, etc.

• Prolonged exposure or extreme temperatures can warp the disc.

• Do not stick or write anything on either side of the disc. Sharp writing 

instruments, or ink, may damage the surface.

Cleaning the unit

• To prevent fire or shock hazard, disconnect your unit from the AC power source when 

cleaning.

• The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. 

Use caution when cleaning and wiping the plastic parts.

• Mild soap and a damp cloth may be used on the front panel.

BEN ENE

   Solution

  nettoyante

Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be 

removed from the product before being charged. Rechargeable batteries are only to be 

charged under adult supervision. Different types of batteries or new and used batteries are 

not to be mixed. Only batteries of the same or equivalent type as recommended are to be 

used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be 

removed from the product. The supply terminals are not to be short circuited. Do not throw 

batteries into a fire. Remove the batteries if you are not going to use the game for a long 

period of time. 

RCD102seriesIM1084_19Feb_V10.indd   14

19/02/2014   3:14 PM

 


background image

15

English

15

LOCATION OF CONTROLS

FM RADIO OPERATION

Refer to the image p.2

1. STOP button

2. STANDBY button

3. MODE button

4. SKIP – (BACKWARDS) button

5. SKIP + (FORWARDS) button

6. PLAY/PAUSE button

7. CD door

8. CD DOOR OPEN button

9. STANDBY Indicator

10. Program Indicator

11. Play/Pause Indicator

12. Repeat Indicator 

13. LED Screen

14. FM SCAN button

15. FM RESET button

16. FM antenna

17. Battery Compartment

18. Headphone jack

19. FUNCTION selector (CD/RADIO/AUX)

20. VOLUME control

21. AUX IN jack

1. Press the STANDBY button to turn on the unit. STANDBY indicator is lit up in full 

brightness.

2. Slide the FUNCTION selector to the RADIO position.

3. Press the FM RESET button to the low end station. 

4. Press the FM SCAN button to select the desired radio station.

5. Press the FM SCAN button again to search another radio station.

6. Adjust the VOLUME control to set the sound level.

7. Press the STANDBY button to switch off the unit. 

Note: 

To ensure maximum FM tuner sensitivity, the FM antenna should be fully extended to obtain 

the best possible reception. Avoid close proximity to the speakers and other electrical 

appliances. 

RCD102seriesIM1084_19Feb_V10.indd   15

19/02/2014   3:14 PM

 


background image

16

English

16

CD OPERATION

Play a CD

1. Press the CD DOOR OPEN button and carefully place a disc on the centre spindle with the 

printed label side facing up and close the CD DOOR OPEN button.

2. Press the STANDBY button to turn on the unit. STANDBY indicator is lit up in full 

brightness.

3. Slide the FUNCTION selector to the CD position. The LED display will show the total 

number of tracks on the disc.

4. Press PLAY/PAUSE and the PLAY indicator will light and the CD will start playing from the 

first track.

5. Adjust the VOLUME control to set the sound level.

6. To suspend playing, press PLAY/PAUSE again. 

7. To resume playing, press PLAY/PAUSE once again.

8. To stop playing, press STOP.

SKIP FORWARDS / SKIP BACKWARDS buttons

1.  When the CD is stopped, to play your favourite track directly, locate the desired track 

using SKIP FORWARDS or SKIP BACKWARDS and press PLAY/PAUSE.

2. When listening to a CD, press SKIP FORWARDS to play the next track. Press SKIP 

BACKWARDS once to skip to the beginning of the track currently playing. Press the same 

button twice or more to play the previous tracks.

3. To search forward or backward through the playing track, press and hold SKIP 

FORWARDS or SKIP BACKWARDS to locate a specific musical passage. The player will 

move forward or backward at high speed as long as the button is pressed. Stop pressing the 

button to return to normal playback. 

Note: 

• If a disc is installed incorrectly, dirty or damaged, it will not play.

• As each track is played, the track number is shown on the display.

• To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for 

the disc to stop before opening the CD door. Never touch the lens when the CD door is open.

• Do not use the carrying handle when playing CD. The product should only be used on a 

steady surface. 

CD REPEAT PLAY

1. While in play mode, press the MODE button once to repeat continuously a single track, the 

repeat indicator will flash.

2. To repeat all the tracks, press MODE twice while in play mode. The repeat indicator will 

light steadily.

3. To cancel the repeat function, repeatedly press the REPEAT until the repeat indicator goes 

off.

RCD102seriesIM1084_19Feb_V10.indd   16

19/02/2014   3:14 PM

 


background image

17

English

17

CD PROGRAMMED PLAY

AUX IN OPERATION

Use the program function to preselect the order in which a sequence of tracks will be played. 

Up to 20 tracks can be programmed.

1. Slide the FUNCTION selector to the CD position.

2. Press MODE, program indicator will light and  “01” will blink on the LED display.

3. Use SKIP FORWARDS or SKIP BACKWARDS to select the first track to include in the 

programmed sequence.

4. Press MODE to confirm and store the track.

5. Repeat steps 3 and 4 to program the other desired tracks.

6. Press PLAY to begin playback. The tracks will be played in the programmed order. The 

PLAY/PAUSE/PROG indicator flashes when the program function is in use.

Note:

• To cancel the program function, press the STOP button until the PLAY/PAUSE/PROG 

indicator goes off.

• During program setting, press STOP or open the CD door.

You can play music through the speakers of this Radio CD Player by connecting its AUX IN 

jack to your MP3 or other digital audio player.

1. Plug one end of an audio cable (not included) into the AUX IN jack located at the back of 

the unit, and the other end of the cable to the line out jack of the device you want to connect.

2. Slide the FUNCTION selector to the AUX position.

3. Adjust the VOLUME control to your desired listening level.

4. Use the function keys of your audio device to pause and resume the playback, adjust the 

volume and select the next or the previous track.

5. To switch off the unit, remove the plug from the AUX IN jack, then press the standby 

button.

HEADPHONE OPERATION

Turn the unit volume to minimum before connecting your headphone (not included) to the 

headphone jack. Headphones should have a 3.5mm diameter stereo plug and an impedance 

of 8 – 32 ohms. When headphones are connected, the speakers are automatically 

disconnected.

Note:

Extended listening of music at high volume may damage your hearing. It is highly 

recommended to use at comfortable volume levels.

RCD102seriesIM1084_19Feb_V10.indd   17

19/02/2014   3:14 PM

 


background image

18

English

18

WARRANTY

This product is covered by our 2-year warranty.

For any claim under the warranty or after sale service, please contact your distributor and 

present a valid proof of purchase. Our warranty covers any manufacturing material and 

workmanship defect, with the exception of any deterioration arising from the non-observance 

of the instruction manual or from any careless action implemented on this item (such as 

dismantling, exposition to heat and humidity, etc.). It is recommended to keep the packaging 

for any further reference.

In a bid to keep improving our services, we could implement modification on the colours and 

the details of the product shown on the packaging.

NOTE:

 Please keep this instruction manual, it contains important information. 

Reference: RCD102series

Designed and developed in Europe - Made in China

© 2014 Lexibook®

United Kingdom & Ireland

For any further information, please call Helpline: 0808 1003015

http://www.lexibook.com

Environmental Protection

Unwanted electrical appliances can be recycled and should not be discarded 

along with regular household waste! Please actively support the conservation 

of resources and help protect the environment by returning this appliance to a 

collection centre (if available).

This product is not a toy.

MAINTENANCE

To prevent fire or shock hazard, disconnect your unit from the AC power source when 

cleaning. The finish on your unit may be cleaned with a dust cloth and cared for as other 

furniture. Use a soft, clean cloth moistened with plain, lukewarm water to clean the exterior of 

the unit. Use caution when cleaning and wiping the plastic parts.  Mild soap and a damp cloth 

may be used on the front panel.

Power supply: 230V AC ~ 50 Hz 10W or 6 x C/LR14 size batteries (9V 

)

FM: 87.5 - 108 MHz

RCD102seriesIM1084_19Feb_V10.indd   18

19/02/2014   3:14 PM

 


background image

Dit product is geen speelgoed.

RCD102seriesIM1084_19Feb_V10.indd   59

19/02/2014   3:14 PM

 


background image

RCD102seriesIM1084_19Feb_V10.indd   60

19/02/2014   3:14 PM