Full Text Searchable PDF User Manual
Customer Service:
800-550-1150,
www.knoedler.com
, info@knoedler.com
Fax: 450-445-0086
OPERATING INSTRUCTIONS
AIR-CHIEF-
“
LOW-RIDER
”
1.
Front Adjustable Armrests (Rotate knob to set arm resting point)
2.
Backrest Adjuster (Rotate to adjust to comfortable position – lay flat)
3.
ICP- Install tetherbelt system here
4.
Side Bolster Adjustment (Press and hold “+” to tighten back cushion side
bolsters, Press and hold “-“ to widen back cushion side bolsters)
5.
Air-Lumbar Controls (Press and hold “+” to increase lumbar support, Press
and hold “-“ to decrease lumbar support)
6.
Seat Height adjustment control
a.
Press on arrow tip to raise seat.
b.
Press on arrow origin to lower seat
7.
Isolator Lockout Control (Push left to Lock; Push right to unlock) {NOTE:
Isolator does not work when there is no air in the suspension system}
8.
Cushion Extension and Angle Adjustment (Lift up and pull out to adjust in 3
positions, Lift up and push in to shorten cushion)
9.
Seat fore and Aft Adjustment (Pull lever to left to unlock and slide seat to
desired position. Please make sure seat is locked into position after
adjusting.)
Customer Service:
800-550-1150,
www.knoedler.com
, info@knoedler.com
Fax: 450-445-0086
“LOW-RIDER” SERVICE PARTS LISTING
Key
PARTNO. Qty
Description
Key
PART NO. Qty
Description
7034
1
SLIDE-SLAVE-SERVICE-9200
32
730083-000
1
SWITCH-ELEC-POWER_RH-SERV-9800
9417
1
CAP-LUMBAR-LOWER-BAG-SERVICE-9400
21
730084-000
1
SEAT_BELT_KIT_3PT_ELE_9IN_CABLE
BUCKLE_BLACK_PRT_98
9418
1
CAP-LUMBAR-UPPER-BAG-SERVICE-9400
8
9400-04
1
VALVE-LUMBAR-LH-SERVICE-9400
9421
1
SLIDE-SLAVE-SERVICE-9400
4
9400-600
1
Comfort Front Adjust. Armrest Right
730085-000
1
ADJUSTER-BACK-COMPLETE-SERVICE-9800
4
9400-61
1
SEATFRAME-SERVICE-9400
87133
1
SPRING-CUSHION-SERVICE-9200
3
9800-325-CH- XXX
1
BACK-SERV-MB-LRC-98-CHIEF
87134
1
DISC-RETAINER-BACK-ADJUSTER-SERVICE-9200
3
9800-326-CH-XXX
1
BACK-SERV-HB-LRC-98-CHIEF
87135
1
HANDLE-BACK-REST-ADJUST
1
9800-326-LR-LXX
1
BACK-SERV-HB-LRC-98-LORIDE-ULTRA-
LEATHER
20
87161
1
CAP-BACK-ADJUSTER-BLACK-SERVICE-9200
1
9800-326-LR-XXX
1
BACK-SERV-HB-LRC-98-LORIDE
20
94253
1
COVER-HANDLE-LOCKOUT-RED-SERVICE-9400
2
9800-325-GC-LXX
1
BACK-SERV-MB-LRC-98-GRCHIEF-
ULTRA-LEATHER
5
730004-000
1
RECLINER-TRIM-RH-SERV-92
2
9800-325-GC-XXX
1
BACK-SERV-MB-LRC-98-GRCHIEF
17
730008-098
1
SHOCK-KIT-98-MEDIUM-SERV-98
16
730011-000
1
ROLLER-BEARING-PIN-KIT-SERV-98
PZ002015
4
PUSHNUT-SERVICE-9200
15
730012-000
1
UPDOWN-LUMBAR-LH-VALVE-KIT-SERV-98
13
730014-004
1
UP-DOWN-BUMPER KIT-4IN-SERV-98
11
730024-000
1
RISER-BUSINESS-CLASS-KIT-SERV-98
12
730016-000
1
CUSHION-BRACKETRY-KIT-SERV-CF
18
RR00-2201-000
1
RISER-BOX-2.25-TRAY-SERVICE-9800
10
730018-000
1
SEAT-FRAME-KIT-SERV-98-CF
730087-000
1
RECLINER_KIT_RH_98_SERV
730600-000
1
DISC_AIR-SPRING_SUPPORT_SERVICE_P005
730023-004
1
SUSP-4IN-ISO-SSH-SERV-98
730504-000
1
AIR SPRING-(P)
6
730028-000
1
VALVE-UP-DOWN-ELEC-LH-SERV-98
730036-021
1
CONSOLE-KIT-RH-STANDARD-UPD-GRA-PLA-
SERV-98
9
730070-000
1
VALVE-KIT-UP/DOWN-LUMBAR-RH-PRIMUS-SERV
XXX- Add Color Material Code
8,9
730073-000
1
VALVE-KIT-UPD-FAS-LH-PRIMUS-SERV-98
7
730074-011
1
CONSOLE-KIT-LH-GRA-ABS-UPD-AL-SERV-9800
7
730074-611
1
CONSOLE-KIT-LH-BLK-ABS-UPD-AL-SERV-9800
33
730074-635
1
CONSOLE-KIT-LH-BLK-ABS-UPD-FAS-SWCH-SERV-
9800
730075-000
1
AIR-LUMBAR-SERVICE-98
730076-000
1
SIDE-BOLSTER-SERVICE-98
730076-000
1
SIDE-BOLSTER-SERVICE-98
Customer Service:
80
“LOW-
0-550-1150,
Fax: 4
-RIDER” SE
,
www.knoe
450-445-008
SERVICE PA
dler.com
, in
86
ARTS LISTI
nfo@knoedle
TING
er.com
Customer Service:
800-550-1150,
www.knoedler.com
, info@knoedler.com
Fax: 450-445-0086
OPERATING INSTRUCTIONS
“
LOW-RIDER
”
Seat Cushion & Backrest Cushion Ordering Information
1. The backrest assembly includes the frame, foam, upholstery cover and the
back adjuster.
2. The seat cushion assembly, includes the seat board, foam, upholstery cover
and tilt bracket hardware.
3. To order the correct Backrest or Seat cushion assembly, select the base
number from the service parts list. Replace the (x) in the part number with a
selection from the trim code table shown below.
Example: To order a high back cushion in black Ultra-Leather upholstery
you would order a “9800-336-L21”.
GRAND-CHIEF
and
LOW-RIDER
SERIES TRIM CODE TABLE
Color
Code
Cloth
Velour
S-Leather
Leather
Black -T31
-C51
-L01
-L21
Brown
-T38
-C32
-L02
Blue
-T36
-C34
Grey
-T33
-C55
-L04
-L24
Red
-T32
-C56
-L05
-L25
Armrest Installation Instructions:
1.
Locate the armrest bracket on the backrest, this is located under the upholstery.
2.
Locate the top two threaded holes in the bracket. Top hole in the bracket is located 6.25 in above
the bottom of the back frame tube. Only two bolts are required to fasten the armrest to the back
frame.
3.
Pierce the upholstery (keep hole as smll as possible) so the armrest bolts can be installed into the
treaded holes in the back frame. Two holes must be piereced in the upolstery for each amrest.
4.
Install a bolt (M8X1.25-30mm) through the middle hole of the armrest bracket. Install the thick
flat washer on the bolts between the armrest bracket and back frame.
5.
Align the bolt with the top hole in the backrest frame. Install the bolt into the back frame and
tighten until it is engaged, (4-5 turns), do not yet tighten securely.
6.
Install the second bolt into the bottom hole of the armrest bracket. Install the thick flat washer on
the bolt between the armest bracket and the back frame.
7.
Algin the bolt (M8X1.25-30mm) with the remaining hole in the backrest frame. Install the bolt
into the back frame and tighten until the armrest bracket is drawn against the back frame.
8.
Tighten the top bolt securely.
9.
Tighten the lower bolt securely.
10.
Repeat steps 1 through 9 for armrest on the opposite side.
