PDF User Manual

  1. Home
  2. Manuals
  3. Horizon Fitness ANDES 6 Owner's Manual

Horizon Fitness ANDES 6 Owner's Manual

ANDES 8

Made by: Horizon Fitness
Type: Owner's Manual
Category: Elliptical Trainer
Pages: 17
Size: 5.29 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

ELLIPTICAL OWNER’S MANUAL

Read the ELLIPTICAL gUIdE before using this OWNER’S MANUAL.

ANDES 

6

ANDES 

8

 


background image

2

3

ASSEMBLY

There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly 

instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the 

elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to 

the elliptical, the assembly instructions must be reviewed and corrective actions should be taken.

Before proceeding, find your elliptical’s serial number located on the front stabilizer tube and enter it in the space provided 

below. Also locate the model name which is next to the serial number.

ENTER YOUR SERIAL NUMBER ANd MOdEL NAME IN THE BOXES BELOW:

SERIAL NUMBER:

MOdEL NAME:  

Horizon                                                                  elliptical

WarninG

 


background image

4

5

PULSE GRIPS

UPPER HANDLEBAR

POWER CORD SOCKET

ROLLER WHEEL COVERS

GUIDE RAIL SET

FOOTPAD

REAR COVER

CONSOLE

TOUCH PAD PANEL AND DISPLAY WINDOWS

LOWER HANDLEBAR

UPPER

 HANDLEBAR COVER

CRANK COVER

PEDAL ARM

LOWER LINK ARM

FRONT / REAR CONSOLE MAST COVER

ANDES 

6

ANDES 

8

ANDES 

6

ANDES 

8

UnpacKinG

Unpack the product where you will be using it. Place the elliptical carton on a level flat 

surface.  It  is  recommended  that  you  place  a  protective  covering  on  your  floor.  Never 

open box when it is on its side.

NOTE:  during  each  assembly  step,  ensure  that  ALL  nuts  and  bolts  are  in  place  and 

partially threaded in before completely tightening any ONE bolt.

NOTE: A light application of grease may aid in the installation of hardware. Any grease, 

such as lithium bike grease is recommended.

If you have questions or if 

there are any missing parts, 

contact Customer Tech 

Support.

neeD Help?

pre 

ASSEMBLY

partS inclUDeD: 

      1 Main Frame
      2 Upper Handlebars Set
      1 Console Mast Set
      1 Console Box
      1 Parts Box

partS BoX inclUDeD: 

      1 Hexagon L-Wrench #5 (W/Screwer)

      1 Front Console Mast Cover                                                                                                       

       ( dWg NO.EP247-Q10)
      1 Rear Console Mast Cover                                                                                                                                            

    ( dWg NO.EP247-Q09)

      1 Power Cord
      1 Owners Manual

 


background image

6

7

ASSEMBLY 

Step 1

ASSEMBLY 

Step 2

ANDES 

6

ANDES 

8

ANDES 

6

ANDES 

8

Use 

HEXAGON L WRENCH #5

 to remove      

PRE-AttACHEd WASHERS (A)

 & 

SCREWS (A)

 

from frame.

Attach the 

CONSOLE CABLES

 to the pre-

attached routing wire. Pull 

CONSOLE WIRES

 

through 

CONSOLE MASt

. discard wire when 

finished.

Set 

CONSOLE MASt

 on the frame.

Use 

HEXAGON L WRENCH #5

 to attach 

CONSOLE MASt

 to frame with 

PRE-AttACHEd 

WASHERS (A)

 & 

SCREWS (A)

.

Use 

HEXAGON L WRENCH #5

 to remove                  

PRE-AttACHEd SCREWS (B)

 from frame.

Then use 

HEXAGON L WRENCH #5

 to 

attach 

CONSOLE MASt COVERS

 with                    

PRE-AttACHEd SCREWS (B)

.

SCREW (A)
M8 x 1.25P x 16 L
Qty: 4

WASHER (A)

φ

8.4 x

φ

17.0 x 1.0T

Qty: 4

SCREW (B)
M4 x 0.75P x 12L
Qty: 2

HEXAGON L 
WRENCH #5
(W/SCREW DRIVER)

pre-attacHeD HarDWare partS:

 

CONSOLE WIRES

REAR CONSOLE 
MAST COVER

SCREW(B)

FRONT CONSOLE 
MAST COVER

SCREW(A)

CONSOLE MAST

WASHERS (A)

CONSOLE WIRES

CONSOLE MAST

SCREW(C)

CONSOLE

Use 

HEXAGON L WRENCH #5

 to remove                  

PRE-AttACHEd SCREW (C)

 from 

CONSOLE

.

Attach 

CONSOLE WIRES

 to 

CONSOLE

.

Use 

HEXAGON L WRENCH #5

 to attach 

CONSOLE

 to 

CONSOLE MASt

 with 

PRE-

AttACHEd SCREW (C)

.

SCREW (C)
M5 x 0.8P x 12L
Qty: 4

HEXAGON L 
WRENCH #5
(W/SCREW DRIVER)

pre-attacHeD HarDWare partS:

 

REAR CONSOLE 
MAST COVER
EP247-Q09

FRONT CONSOLE 
MAST COVER
EP247-Q10

 


background image

8

9

ASSEMBLY 

Step 3

ANDES 

6

ANDES 

8

A  Use 

HEXAGON L WRENCH #5

 to remove              

PRE-AttACHEd SCREWS (d)

 from 

UPPER 

HANdLEBARS

.

B  Attach 

UPPER HANdLEBARS

 to 

 LOWER 

HANdLEBARS

 with 

PRE-AttACHEd SCREWS (d

).

SCREW (D)
M10 x1.25P x 10L
Qty: 4

HEXAGON L 
WRENCH #5
(W/SCREW DRIVER)

pre-attacHeD HarDWare partS:

 

ANDES 

6

ANDES 

8

SCREW(D)

LOWER HANDLEBARS

UPPER HANDLEBARS

anDeS 6

ECB Magnetic Brake System
Max. User Weight: 136 kg / 300 lbs
Product Weight: 82 kg / 181 lbs
Overall dimension: 155 x 67.5 x 175 cm / 61” x 26.5” x 69”

anDeS 8

Induction Brake System
Max. User Weight: 136 kg / 300 lbs
Product Weight: 82 kg / 181 lbs
Overall dimension: 155 x 67.5 x 175 cm / 61” x 26.5” x 69”

ASSEMBLY COMPLETE!

 


background image

10

11

FolDinG inStrUction

FolD Up inStrUction

Use right hand to grip the handle.
Pull up until guide rail set locks into place.

FolDinG inStrUction

FolD DoWn inStrUction

Use right hand to grip the handle, push forward gently.
Pull up on the handle to release.
Pull back to fold down.

note

: The guide rails have a soft drop shock system. Let the rails unfold, do not push down on the rails.  

            doing so may cause the front of the elliptical to tip over.

note

: For ease of folding, position footpads so they are parallel or the front footpad is higher than the rear.

ANDES 

6

ANDES 

8

ANDES 

6

ANDES 

8

SUPPORT TUBE

HANDLE

SUPPORT TUBE

HANDLE

SUPPORT TUBE

HANDLE

SUPPORT TUBE

HANDLE

 


background image

12

13

ELLIPTICAL OPERATION

This section explains how to use your elliptical’s console and programming. 

The BASIC OPERATION section in the ELLIPTICAL gUIdE has instructions for the following:

• 

location oF tHe elliptical

• 

poWer/GroUnDinG inStrUctionS

• 

Foot poSitioninG

• 

MoVinG tHe elliptical

• 

leVelinG tHe elliptical

• 

 poWer/ManUal incline operation

• 

USinG tHe Heart rate FUnction

MoVinG tHe elliptical

WarninG!

Our ellipticals are heavy, use care and additional help if necessary when moving.
Failure to follow instructions could result in injury.

ANDES 

6

ANDES 

8

 


background image

14

15

anDeS 6 & 8 conSole operation

QUicK Start

1) Make sure the power is on.
2) Simply press the “START” key and begin exercising.

SetUp YoUr perSonal Data

This console is able to store your personal data which includes name, gender, age and weight. This allows you to start your workout 
more quickly and monitor your exercise information more accurately. Please setup your personal data before you use the machine for 
the first time. To set up your data, please follow the procedure as below,
1) Select user 1, 2 or 3
2) Select your gender                          
3) Select your age
4) Select your weight                           
5) Input your name
6) Hold the “

Start

” key for 3 seconds to finish your setup

The console is able to store up to 3 users’ data. If you would like to modify your personal data, please select “

USerS SettinG

” for 

modification.

Start YoUr WorKoUt

1) Select the user. (If your personal data has been entered, just select and then you can start your workout).
2) Select your gender.
3) Select your age. 
4) Select your weight.
5) Select the program you preferred.
6) Start your workout.

EnergySaver

ENERGIESPARMODUS

STOP

CLEAR

LÖSCHEN

START

SELECT

AUSWAHL

ANDES 

6

ANDES 

8

ANDES 

6

ANDES 

8

controlS

Click

3 seconds hold

5 seconds hold

•  Increase
•  Next item

•  decrease
•  Previous item

•  Quick start

•  Select item

•  Start the workout

•  Enter to the next 

step

•  Finish inputting      

user ’s name

•  Stop the workout

•  Back to the               

previous step                                 

•  Reset

•  Language selection

•  Metric /British     

selection

note

These two display at left shows your performance and achieving 
rate of your fitness goals. (refer to program file for more 
information.)

EnergySaver
ENERGIESPARMODUS

STOP

CLEAR

LÖSCHEN

START

SELECT

AUSWAHL

EnergySaver
ENERGIESPARMODUS

STOP

CLEAR

LÖSCHEN

START

SELECT

AUSWAHL

 


background image

16

17

• 

GaMe 1: 

This warm up game simulates a Car Racing 

game. To control the car up and down, you pedal faster 

or slower. Try to avoid those barriers and keep on track. 

You only have 11 chances to complete the circuit, so be 

careful .

• 

GaMe 2: 

This warm up game simulates a Fishing game. 

To control the fishhook to go deeper or shallower, you 

pedal faster or slower. After the fish has been caught by 

you fishhook, then pedal faster until the fishhook is off 

of the screen. Some of the fish are harder to catch than 

others, but you will get more points from catching these 

fish.

• 

Hrc 1:

 Benefits weight loss by maintaining an optimum 

exercise level to burn fat, while adjusting the resistance to 

keep you in your target heart rate zone.

NOTE: When using HRC program, the percentage meter at 

right will show your current HR and your achieving rate. You 

must get 100% to reach your target set.

• 

MoUntain:

 Improves performance and stamina by 

raising the resistance level to high peaks to simulate the 

most difficult outdoor terrains.

• 

Fit-teSt: 

Test your current level of physical fitness.

At completion of the program,it will provide feedback 

regarding your fitness level for you to monitor your 

progress.

• 

Step teSt: 

Test your current level of physical fitness.

At completion of the program,it will provide feedback 

regarding your fitness level for you to monitor your 

progress.

• 

WeiGHt loSS:

 Promotes weight loss by raising and 

lowering the resistance level, while keeping you in your 

fat burning zone.

• 

aFter BUrner: 

Recover your heart and muscles by 

gradually cooling down after intensive workout.

• 

WattS control: 

Exercise at a set work level. As 

you increase your pedal rate(RPM), your resistance will 

decrease; if you decrease your pedal rate (RPM), your 

resistance will increase.

NOTE: When using WATTS control program, the bar at the 

bottom shows your current watt and percentage  meter at 

left shows your achieving rate. You must get 100% to reach 

your target set.

proGraM proFileS

• 

ManUal:

 Allows you to adjust the resistance level to 

your preference, without a preset program.

• 

interValS:

 Improves your strength, speed, and 

endurance by raising and lowering the resistance 

levels throughout your workout to involve both your 

heart and muscles.

• 

rollinG:

 Maintains weight by gradually raising and 

lowering the resistance level to gradually raise and 

lower your heart rate.

proGraM proFileS

 


background image

18

19

proGraM proFileS

• 

Hrc 2:

 Benefits weight loss by maintaining an optimum 

exercise level to burn fat, while adjusting the resistance to 

keep you in your target heart rate zone.

• 

cUStoM 1:

 Customized workout, time defaults to 15 

minutes.

• 

cUStoM 2.3:

 Customized workout, time defaults to 15 

minutes.

SYncinG elliptical WitH paSSport

1) Using the arrow key on the passport remote control to scroll to the setup icon and 

press the Select.

2) Follow the on-screen prompt to press and hold the RESISTANCE UP and STOP 

buttons on the equipment’s console.

3) Once your sync is success, your elliptical message bar will change from RF Sync to 

Passport Ready.

4) Besides point 3, the message displayed on-screen will notify you if the sync was 

completed or failed.

RESISTANCE UP

STOP

acceSSinG MeDia tHroUGH on-Screen MenU

1) You can access the Virtual Active content or your personal movies are stored on the 

USB drive. Select either the Virtual Active icon or the Media icon using the remote 

control.

2) Follow the on-screen prompts to select a video and begin your workout.

3) You will have to Press START on your equipment’s console to begin playing a video.

note:

 See Passport Owner’s Manual for more information.

RESISTANCE UP

STOP

 


background image

20

21

MonitorinG YoUr Heart rate

FeeDBacK

Your Horizon Fitness elliptical trainer offers two heart rate feedback options. You may choose to use the heart rate handlebars, or the 
chest transmitter (sold separately) for a hands free workout.

Heart rate HanDleBar

Place the palm of your hands directly on the heart rate handlebars. Both hands must grip the bars for your heart rate to register. 
When gripping the handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure. Try to maintain moderate 
pressure while holding onto the heart rate handlebars. It is recommended that you hold the handlebars only long enough the see your 
heart rate readout on the console. You may experience an erratic readout if consistently holding the handlebars.

teleMetric cHeSt tranSMitter (SolD SeparatelY)

Prior to wearing the chest transmitter sold separately on your chest, moisten the two rubber electrodeswith water. Center the chest 
strap just below the breast or pectoral muscles, directly overyour stermum, with the Horizon Fitness logo facing out. NOTE: The chest 
strap must be tight and properly placed to receive an accurate and consistent readout. If the chest strap is too loose, or positioned 
improperly, you may receive an erratic or inconsistent heart rate readout.
If you have any problems with the heart rate function please refer to pages 16 & 17 in the troubleshooting section of the 
elliptical guide.

WarninG!

The heart rate function is not a medical device. Various factors may affect the accuracy of your heart rate reading. The heart rate 
reading is intended only as an exercise aid.

aDneS 6 eXploDeD VieW

P05

 


background image

22

23

anDeS 6 partS liSt

NO.

DESCRIPTION

 

1

CONSOLE MAST SET;SA;EP266-A11;

2

PEDAL ARM SET;R;SEMI-ASSY;EP247-2KM

4

PEDAL ARM SET;L;SEMI-ASSY;EP247-2KM

5

GUIDE RAIL SET;SA;EP266-A15;

6

ARM REST SET;R;U;SEMI-ASSY;PAHS;EP247

7

ARM REST SET;L;U;SEMI-ASSY;PAHS;EP247

8

ARM REST SET;SA;RD;EP266-A18;

10

ARM REST SET;SA;LD;EP266-A20;

13

LINK ARM SET;SA;L;EP266-A23;

18

DRIVE SET;SA;EP266-A28;

19

FREEWHEEL SA;EP247;

20

LINK ARM SET;SA;R;EP266-A30;

21

CRANK SET;SA;L;EP266-A31;

22

CRANK SET;SA;R;EP266-A32;

AN1

CONSOLE SET;SA;EP266-2KM;ENG/GER

B31

SCREW;BH;M8X1.25PX45L;HS;CRMO;G10.9;NKL

B32

NUT;NLK;M8X1.25P;NKL;

B33

WASHER;FLT;Φ8.2XΦ18.0X1.0T;SPHC ;NKL;

B34

RVN;HX;39515;YZN;

B36

FOOT PAD;ADJUST;RUBBER;W3/8-16UNC;FMW38A

B37

FOOT PAD;STABILIZER;R;FRONT;CB131;

B38

SCREW;BH;Φ5X15L;SM;PH;BZN;POT

B39

FOOT PAD;STABILIZER;L;FRONT;CB131;

B40

NUT;HX;3/8-16UNC;SS41;BZN;

B41

SWIVEL PLATE;PANTING;EP247

NO.

DESCRIPTION

 

Q01

COVER;R;PAINTING;PT433U;1599.7G;EP247

Q02

COVER;L;PAINTING;PT433U;1585.6G;EP247

Q05

SIDE COVER;U;F;PAINTING;EP247

Q06

SIDE COVER;U;B;PAINTING;EP247

Q07

SCREW;BH;Φ4X15L;SM;PH;BZN;POT

Q08

PLATE POWER SOCKET

Q09

CLIP; STANDARD; FE; ZNC

Q10

CONNECTOR JOINT FRONT

Q11

SCREW;BH;Φ4X15L;TC;PH;BAN;POT

R11

BELT;POLY-V;420-J8;

V01

SPEC LABEL;CE;EP266-2KM;

NO.

DESCRIPTION

 

B42

ROLLER;RUBBER;ZN PLATE;EP34

B43

SCREW;BH;M6X1.0PX25L-20L;HS;BP;P-T

B44

WASHER;FLT;Φ6.5XΦ14.0X1.0T;BZN;

B45

NUT;NLK;M6X1.0P;ZN;

B46

SWIVEL PLATE;2;PANTING;EP247

B47

BEARING;DRY;PAP 2015;SHUN DE;

B48

SCREW;BH;M6X1.0PX20L;HS;BZN;

B49

TRANSPORTS WHEEL ;PC;BLACK;FC16

B50

NUT;NLK;M8X1.25P;BZN;

B51

SCREW;BH;M8X1.25PX30L;HS;

B52

PULL PIN;EP247

B53

SPRING;CMP;Φ1.2XΦ14.5X17.0LX8.5N;SWP;WZN

B54

CLIP CC S-12 EXTERNAL

B55

CAP;STABILIZER;PVC;Φ60X2T;BLF54

B56

AIR SHOCK;EP247

M01

ECB SET;8KG;EUP;

M02

STEEL ROPE;EP221

M03

SCREW;BH;M4X0.7PX10L;CT;PH;BZN;

P01

CONSOLEWIRE;1400MM;CKM254301-8PX2

P02

WIRE;SENSOR;250M;OKI SENSOR CKM25430

P03

POWER WIRE;DC;600MM(DC+CKM 25430101-2P)

P05

POWER ADAPTOR;

P06

SCREW;BH;Φ3X8L;SM;PH;BAN;POT

P07

SENSOR BRACKET

P08

SCREW;TRH;Φ4X10L;SM;PH;BZN;POT

 


background image

24

25

aDneS 8 eXploDeD VieW

M54

M49

M50

M51

M53

M40

M42x4

M47x4

M45x2

M48X8

2-M52

M41

M49

M50

M51

M53

P12

anDeS 8 partS liSt

NO.

DESCRIPTION

 

1

CONSOLE MAST SET;SA;EP267-A11;

2

PEDAL ARM SET;R;SEMI-ASSY;EP247-2KM

4

PEDAL ARM SET;L;SEMI-ASSY;EP247-2KM

5

GUIDE RAIL SET;SA;EP267-A15;

6

ARM REST SET;R;U;SEMI-ASSY;PAHS;EP247

7

ARM REST SET;L;U;SEMI-ASSY;PAHS;EP247

8

ARM REST SET;SA;RD;EP266-A18;

10

ARM REST SET;SA;LD;EP266-A20;

13

LINK ARM SET;SA;L;EP266-A23;

18

DRIVE SET;SA;EP266-A28;

20

LINK ARM SET;SA;R;EP266-A30;

21

CRANK SET;SA;L;EP266-A31;

22

CRANK SET;SA;R;EP266-A32;

AN1

CONSOLE SET;SA;EP267-2KM;

B31

SCREW;BH;M8X1.25PX45L;HS;CRMO;G10.9;NKL

B32

NUT;NLK;M8X1.25P;NKL;

B33

WASHER;FLT;Φ8.2XΦ18.0X1.0T;SPHC ;NKL;

B34

RVN;HX;39515;YZN;

B36

FOOT PAD;ADJUST;RUBBER;W3/8-16UNC;FMW38A

B37

FOOT PAD;STABILIZER;R;FRONT;CB131;

B38

SCREW;BH;Φ5X15L;SM;PH;BZN;POT

B39

FOOT PAD;STABILIZER;L;FRONT;CB131;

B40

NUT;HX;3/8-16UNC;SS41;BZN;

B41

SWIVEL PLATE;PANTING;EP247

B42

ROLLER;RUBBER;ZN PLATE;EP34

NO.

DESCRIPTION

 

B43

SCREW;BH;M6X1.0PX25L-20L;HS;BP;P-T

B44

WASHER;FLT;Φ6.5XΦ14.0X1.0T;BZN;

B45

NUT;NLK;M6X1.0P;ZN;

B46

SWIVEL PLATE;2;PANTING;EP247

B47

BEARING;DRY;PAP 2015;SHUN DE;

B48

SCREW;BH;M6X1.0PX20L;HS;BZN;

B49

TRANSPORTS WHEEL ;PC;BLACK;FC16

B50

NUT;NLK;M8X1.25P;BZN;

B51

SCREW;BH;M8X1.25PX30L;HS;

B52

PULL PIN;EP247

B53

SPRING;CMP;Φ1.2XΦ14.5X17.0LX8.5N;SWP;WZN

B54

CLIP CC S-12 EXTERNAL

B55

CAP;STABILIZER;PVC;Φ60X2T;BLF54

B56

AIR SHOCK;EP247

M40

MAGNETIC CONTROL;ELECTROMAGNET;260W;510R

M41

CTL BOARD;AC;MLH1003HCPC;C02;JIS

M42

SCREW;SH;M6X1.0PX45L;HS;BZN;

M43

CABLE TIE;NYLON;300L;WHITE

M45

SCREW;SH;M8X1.25PX15L;HS;CRMO;

M47

NUT;NLK;M6X1.0P;BAN;

M48

WASHER;FLT;Φ14.0XΦ65.0X1.0T;

M49

SCREW;EB;1/4-20UNCX40L;BZN;

M50

NUT;NLK;1/4'-20UNC;BZN;

M51

FIX PLATE;EYE BOLT;SPC;1.3T;AB01

M52

SCREW;BH;M4X0.7PX15L;CT;PH;BZN;

 


background image

26

27

NO.

dESCRIPTION

 

M53

NUT;HX;3/8-26UNCX9H;SS41;G10.9(G10);BZN;

M54

NUT;LCK;3/8-26UNF(17L);SS41;WZN+3;

M55

SCREW;BH;Φ4X12L;SM;PH;YZN;POT

M56

FLYWHEEL SET;SA;EP267-A35;

P01

WIRE;CONSOLE;1200MM;CKM254301-8P,TZT

P02

WIRE;SENSOR;300MM;OKI SENSOR TZT:2

P03

WIRE;PWR SWITCH;150+150+150;250#;

P04

BREAKER 3A/125V

P05

WIRE;CTRL BOARD PWR;BLACK;250LOCK150L;

P06

SCREW;RND;Φ3X10L;TC;PH;BZN;POT

P07

SENSOR BRACKET

P08

SCREW;TRH;Φ4X10L;SM;PH;BZN;POT

P09

WIRE;WHITE;250CONNECT 200L 16AWG;

P10

NPUT FILTER;220V/3A

P12

POWER CORD

Q01

PLASTIC COVER;R;PAITING;PT433U;EP251

Q02

PLASTIC COVER;L;PAITING;PT433U;EP251

Q05

SIDE COVER;U;F;PAINTING;EP247

Q06

SIDE COVER;U;B;PAINTING;EP247

Q07

SCREW;BH;Φ4X15L;SM;PH;BZN;POT

Q08

PLASTIC BASE;POWER SUPPLY SWITCH;ABS;

Q09

CLIP; STANDARD; FE; ZNC

Q10

CONNECTOR JOINT FRONT

Q11

SCREW;BH;Φ4X15L;TC;PH;BAN;POT

R11

BELT;POLY-V;420-J8;

NO.

dESCRIPTION

 

V01

SERIES NO. LABEL;CE;EP267-2KM;

eXclUSionS anD liMitationS

Max. User Weight = 136 kg / 300 lbs

WHo iS coVereD: 

  

•  The original owner and is not transferable.  

WHat iS coVereD:  

 

•  Repair or replacement of a defective motor, electronic component, or defective part and is the sole remedy of the warranty.  

WHat iS not coVereD: 

 

•  Normal wear and tear, improper assembly or maintenance, or installation of parts or accessories not originally intended or compatible 

   with the equipment as sold.  
•  damage or failure due to accident, abuse, corrosion, discoloration of paint or plastic, neglect, theft, vandalism, fire, flood, wind, lightning,  

   freezing, or other natural disasters of any kind, power reduction, fluctuation or failure from whatever cause, unusual  

   atmospheric conditions, collision, introduction of foreign objects into the covered unit, or modifications that are unauthor-ized or not 

   recommended by Fitness gear. 
•  Incidental or consequential damages. Fitness gear is not responsible or liable for indirect, special or consequential damages, 

   economic loss, loss of property, or profits, loss of enjoyment or use, or other consequential damages of whatsoever nature in connection 

   with the purchase, use, repair or maintenance of the product. 
•  Equipment used for commercial purposes or any use other than a single family or Household, unless endorsed by Fitness gear for 

   coverage. 
•  delivery, assembly, installation, setup for original or replacement units or labor or other costs associated with removal or replace-ment 

   of the covered unit. 
•  Any attempt to repair this equipment creates a risk of injury. Fitness gear is not responsible or liable for any damage, loss or liability 

   arising from any personal injury incurred during the course of, or as a result of any repair or attempted repair of your fitness equipment  

   by other than an authorized service technician.  All repairs attempted by you on your fitness equipment are undertaken AT YOUR 

   OWN RISK and Fitness gear shall have no liability for any injury to the person or property arising from such repairs. 

 


background image

D: entsorgungshinweis

HORIZON  Fitness  -  Produkte  sind  recyclebar.  Führen  Sie  das  gerät  am  Ende  der  Nutzungsdauer  einer 

sachgerechten Entsorgung zu (örtliche Sammelstelle).

GB: Waste Disposal

HORIZON Fitness products are recyclable. At the end if its useful life please dispose of this article correctly and 

safely (local refuse sites).

F: remarque relative à la gestion des dèchets

HORIZON Fitness sont recyclables. A la fin sa durrèe d`utilisation, remettez  I´appareil à un centre de gestion 

de dèchets correct (collecte locale).

nl: Verwijderingsaanwijzing

HORIZON Fitness producten zijn recycleerbaar. Breng het apparaat aan het einde van de gebruiksduur naar 

een op recycling gespecialiseerd bedrijf (plaatselijk verzamelpunt).

e: informaciones para la evacuaciòn

HORIZON Fitness son riciclables. Cuando se termina la vida ùtil de un aparato o una màquina, entrèguelos an 

una impresa local de eleiminaciòn de residuos para su reciclaje.

i: indicazione sullo smaltimento

HORIZON Fitness sono reciclabill. Quando I`apparecchio non servirà più, portatelo in un apposito punto di 

raccolta della Vostra città (Punti di raccolta comunall).

pl: Wskazòwka dotyczàca usuwania odpadòw.

Producty  firmy  HORIZON  Fitness  podlegajà  recyklingowi.  Pod  koniec  okresu  o`ywalnoÈcl  pros`z  oddac 

urzàdzenie do wlaÈciwego punkto usuwania odpadòw (lokalny punkt zbiorczy).

 


background image

 


background image

ELLIPTICAL OWNER’S MANUAL

Andes 6 & Andes 8 Owner’s Manual 071312’ Rev. 1.6 © 2012 Horizon Fitness