PDF User Manual

  1. Home
  2. Manuals
  3. Hilti DX 350 Operating Instructions Manual

Hilti DX 350 Operating Instructions Manual

Made by: Hilti
Type: Operating Instructions
Category: Drill
Pages: 16
Size: 0.27 MB

 

Download PDF User Manual



Full Text Searchable PDF User Manual



background image

DX350

Bedienungsanleitung
Operating instructions
Mode d’emploi
Istruzioni d’uso

*309899*

309899

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

2

Nichtbeachten dieser Vorsichtsmassnahmen könnte Personenschäden verursachen.

Verwenden Sie nur Hilti Kartuschen oder Kartuschen mit vergleichbarer
Qualität

Werden minderwertige Kartuschen in Hilti Werkzeugen eingesetzt, können sich
Ablagerungen aus unverbranntem Pulver bilden, die plötzlich explodieren und
schwere Verletzungen des Anwenders und Personen in dessen Umgebung verur -
sachen können. Kartuschen müssen eine der folgenden Mindest an forderungen
erfüllen:

a) Der betreffende Hersteller muss die erfolgreiche Prüfung nach EU-Norm EN

16264 nachweisen können

HINWEIS:

Alle Hilti Kartuschen für Bolzensetzgeräte sind erfolgreich nach EN 16264
getestet.

Bei den in Norm EN 16264 definierten Prüfungen handelt es sich um Systemtests
spezifischer Kombinationen aus Kartuschen und Werkzeugen, die von Zertifi -
zierungs stellen durchgeführt werden.
Die Werkzeugbezeichnung, der Name der Zertifizierungsstelle und die System -
test-Nummer sind auf der Verpackung der Kartusche aufgedruckt.

oder

b) Das CE-Konformitätszeichen tragen (ab Juli 2013 in der EU zwingend

vorgeschrieben)

Siehe auch Verpackungsbeispiel unter: www.hilti.com/dx-cartridges

!

Warnungen:

1. Verwenden Sie das Gerät nie, ohne vorher in dessen sicheren Anwendung geschult

worden zu sein. Für Beratung wenden Sie sich an den Hilti-Verkaufs berater.

2. Verwenden Sie das Gerät immer gemäss der Bedienungsanleitung, welche stets

mit dem Gerät mitzuführen ist.

3. Richten Sie das Gerät nicht gegen sich oder eine andere Person.
4. Pressen Sie das Gerät nie gegen Ihre Hand oder einen anderen Körperteil.
5. Der Bediener und die sich in der Nähe aufhaltenden Personen müssen während der

Benutzung des Geräts einen geeigneten Schutzbrille und Schutzhelm tragen. 

Sicherheitshinweise:

6. Setzen Sie das Gerät nur in gut belüfteten Arbeitsbereichen ein.
7. Verwenden Sie wenn immer möglich die Zusatzstandplatte/Schutzkappe.
8. Lassen Sie ein geladenes Gerät nie unbeaufsichtigt. Entladen Sie das Gerät immer

vor Reinigungs- und Unterhaltsarbeiten, vor dessen Lagerung nach Arbeitsschluss,
vor Arbeitspausen, vor dem Auswechseln von Teilen.

9. Tragen Sie bei Arbeiten in geschlossenen Räumen einen Gehör schutz.

10. Kontrollieren Sie das Gerät immer auf einwandfreie Betriebstüchtigkeit, bevor Sie es

einsetzen. Setzen Sie ein Gerät nicht ein, das unvollständig ist oder nicht richtig
funktioniert.

11. Halten Sie bei der Betätigung des Gerätes die Arme gebeugt (und nicht gestreckt).

Unterbrechen Sie die Arbeit bei Unwohlsein.

12. Halten Sie das Gerät beim Bolzensetzen immer senkrecht zur Arbeitsfläche und

zum Grundmaterial.

13. Verwenden Sie immer Original-Hilti-Befestigungselemente, -Kartuschen und  -

Ersatzteile, oder solche von gleichwertiger Qualität.

14. Versuchen Sie nicht, Kartuschen aus dem Magazinstreifen oder aus dem Gerät mit

Gewalt zu entfernen.

15. Bei einer Fehlzündung oder wenn eine Kartusche nicht zündet, immer wie folgt vor-

gehen:

Das Gerät während 30 Sekunden gegen die Arbeitsfläche halten.

Wenn die Kartusche immer noch nicht zündet, das Gerät von der Arbeits fläche
nehmen und dabei darauf achten, dass es nicht gegen Sie oder eine andere Per-
son gerichtet ist.

Repetieren Sie das Gerät, damit die nächste Kartusche transportiert wird; brau-
chen Sie die restlichen Kartuschen des Kartuschenstreifens auf; entfernen Sie
den aufgebrauchten Kartuschenstreifen und beseitigen Sie diesen so, dass eine
nochmalige oder missbräuchliche Verwendung ausgeschlossen ist.

16. Nie in ein bestehendes Loch setzen, ausser wenn von Hilti empfohlen, wie z.B.

beim DX-Kwik.

17. Bei Nichtgebrauch das Gerät und die Kartuschen immer an einem sicheren Ort in

einem geschlossenen Behälter aufbewahren.

18. Das Gerät nicht in einer explosiven oder entflammbaren Atmosphäre einsetzen,

ausser das Gerät ist dafür zugelassen.

19. Beachten Sie immer die Anwendungsrichtlinien.
20. Versichern Sie sich, dass sich niemand hinter oder unter dem Ort befindet, wo die

Befestigungen ausgeführt werden.

21. Zerlegen Sie das Gerät nicht, wenn es heiss ist.
22. Überschreiten Sie nie die empfohlene Setzfrequenz (Anzahl Setzungen pro Stunde).

Das Gerät könnte sonst überhitzt werden.

Allgemeine Hinweise
23. Befestigungselemente nie nachsetzen.
24. Beachten Sie die massgeblichen nationalen Vorschriften, insbesondere betreffend

Unfallverhütung.

Durchschuss- und Abprallsicherung:
Das Kolbenprinzip bewirkt eine niedrige Nagelgeschwindigkeit und das Abbauen von
eventueller Überenergie im Gerät.

Anpress-Sicherung:
Die Anpressicherung verhindert, dass das arbeitsbereite Gerät ohne Anpressen auf
festen Untergrund betätigt werden kann. Die Zündung kann erst erfolgen, wenn die
Anpressicherung gedrückt wird. Dabei muss der Anpressdruck von min. 110 N und ein
Anpressweg von 16 mm überwunden werden.

Vorsichtsmassnahmen bei der Anwendung:

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

Failure to follow these precautions could result in personal injury.

Only use Hilti cartridges or cartridges of equivalent quality 

The use of cartridges of inferior quality in Hilti tools may lead to build-up of
unburned powder, which may explode and cause severe injuries to operators
and bystanders. At a minimum, cartridges must either:

a) Be confirmed by their supplier to have been successfully tested in

accordance with EU standard EN 16264

NOTE:

All Hilti cartridges for powder-actuated tools have been tested successfully
in accordance with EN 16264.

The tests defined in the EN 16264 standard are system tests carried out by
the certification authority using specific combinations of cartridges and tools.
The tool designation, the name of the certification authority and the system
test number are printed on the cartridge packaging.

or

b) Carry the CE conformity mark (mandatory in the EU as of July 2013).

See packaging sample at: www.hilti.com/dx-cartridges

!

Warnings

1. Never attempt to use the tool without first having received proper instruction

on its use and associated safety precautions. Contact your local Hilti sales
representative for assistance.

2. Always use the tool strictly in accordance with the operating instructions. The

operating instructions should always be kept with the tool. 

3. Never point the tool at yourself or any bystander. 
4. Never press the muzzle of the tool against your hand or other part of your

body.

5. The operator, and any other persons in the immediate vicinity, must wear sui-

table suitable eye protection and a helmet while the tool is in use.

Safety precautions

6.

Operate the tool only in well-ventilated working areas.

7. Use the stabiliser/guard whenever possible.
8. Never leave a loaded tool unattended. Always unload the tool before begin-

ning cleaning and servicing, before putting the tool away at the end of the
day, before work breaks, and before changing parts. 

9. Wear ear protectors when using the tool indoors or in enclosed spaces.

10.Always check that the tool is undamaged and fully functional before it is used.

Never attempt to use an incomplete or malfunctioning tool. 

11.Keep the arms flexed when the tool is fired (do not straighten the arms). Stop

working with the tool if you feel unwell.

11.Always hold the tool perpendicular to the working surface and material in

which the fastener is to be driven.

13. Always use genuine Hilti fasteners, cartridges and spare parts, or those of

equivalent quality. 

14. Never attempt to pry a cartridge from magazine strip or tool.
15. If a cartridge misfires or fails to ignite, proceed as follows:

Keep the tool against working surface for 30 seconds.

If the cartridge still fails to fire, withdraw the tool from the working surface,
taking care that it is not pointed towards your body or bystanders.

Cycle the tool so that the magazine strip is transported to the next cartrid-
ge. Use up the remaining cartridges in the strip. Remove the used cartridge
strip and dis pose of it in such a way that it can be neither reused nor mis u-
sed.

16. Never attempt to drive a fastener in an existing hole, except where recom-

mended by Hilti, e. g. when using the DX-Kwik system.

17. Always keep the tool and cartridges in a closed container in a safe place

when not in use.

18. Do not operate the tool in an explosive or flammable atmosphere, unless the

tool is approved for such use.

19.Application recommendations must always be observed.
20.Before using the tool, make sure that no one standing behind or below the

point where fasteners are to be driven.

21.Do not disassemble the tool while it is hot.
22.Never exceed the recommended maximum fastener driving rate (number of

fastenings per hour). The tool may otherwise overheat.

General notes
23.Never attempt to redrive the same fastener.
24. The applicable national regulations must always be observed, particularly

those relating to accident prevention.

Through-shot and ricochet prevention
The piston principle employed results in low fastener velocity and dissipation of
excess driving power. 

Contact pressure safety device
This safety device prevents the loaded tool from being fired unless it is pressed
against a firm working surface. The tool can only be fired after it has been cocked by
pressing it against the working surface, overcoming a cocking force of at least 110 N
and cocking movement of 16 mm.

Safety precautions

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

4

Bien respecter les précautions d'utilisation suivantes pour ne blesser personne!

N'utiliser que des cartouches Hilti ou des cartouches de qualité équivalente. 

L'utilisation de cartouches de qualité moindre dans les outils Hilti risque d'entraîner
une accumulation de poudre non consumée susceptible d'exploser subitement et
de causer de graves blessures aux opérateurs et aux personnes alentour. Les
cartouches doivent satisfaire l'une des exigences minimales suivantes :

a) Leur fournisseur doit pouvoir confirmer le résultat positif des essais

conformément à la norme européenne EN 16264

REMARQUE:

l Toutes les cartouches pour appareils de scellement ont été testées avec succès

conformément à la norme EN 16264.

l Les contrôles définis par la norme EN 16264 sont des tests des systèmes

correspondant à des combinaisons spécifiques de cartouches et outils, qui sont
agréés par des organismes de certification.
La désignation de l'outil, le nom de l'organisme de certification et le numéro du
système sont imprimés sur l'emballage de la cartouche.

ou

b) Elles doivent porter le marquage CE de conformité (obligatoire dans l'UE à

partir de juillet 2013)

Voir exemple d'emballage à l'adresse : www.hilti.com/dx-cartridges

!

Avertissements:

1. Ne jamais utiliser cet appareil si vous n'avez pas reçu d'instructions sur son utilisa -

tion en toute sécurité. Si vous avez besoin de conseils, contactez votre conseiller
de vente Hilti.

2. Toujours utiliser cet appareil en parfaite conformité avec le mode d'emploi qui doit

toujours accompagner l’appareil.

3. Ne pas pointer l'appareil contre vous-même ou quelqu'un d'autre.
4. Ne jamais appuyer l'appareil contre la paume de votre main ou contre une autre

partie de votre corps.

5. L'opérateur et son entourage doivent porter des lunettes de protection appro-

priées et un casque dur pour utiliser l'appareil.

Consignes de sécurité:

6.

Utiliser l'appareil uniquement dans des emplacements bien aérés

.

7. Toujours utiliser l’embase additionnelle / le pare-éclats lorsque cela est possible.
8. Ne jamais laisser un appareil chargé hors de votre surveillance: toujours décharger

l'appareil avant de le nettoyer et de le réviser, avant de le ranger à la fin de la
journée, avant de faire une pause, avant d'échanger des pièces.

9. Portez une protection antibruit lorsque vous travaillez dans une aire confinée.

10. Toujours vérifier le bon fonctionnement de l'appareil avant de l'utiliser, ne pas utili-

ser l'appareil s'il est incomplet ou s'il ne fonctionne pas correctement.

10. Garder les bras fléchis lorsque vous utilisez l'appareil (Ne pas tendre les bras). Si

vous ressentez un manque de confort, interrompre le travail.

12. Pour réaliser une fixation, toujours tenir l'appareil bien perpendiculairement à la

surface de travail et au matériau-support.

13. Toujours utiliser des éléments de fixation, des cartouches et des pièces de rechan-

ge d'origine Hilti ou de qualité équivalente.

14. Ne pas essayer d'enlever de force des cartouches de leur bande-chargeur ou de

l'appareil.

15. En cas de ratés (tir ou percussion), toujours procéder comme suit:

Tenir l'appareil contre la surface de travail pendant 30 secondes.

Si la cartouche ne percute toujours pas, retirer l'appareil de la surface de travail,
prendre soin qu’il ne soit jamais pointé en direction de l'utilisateur ou de son
 entourage.

Pour faire avancer la bande-chargeur d'une cartouche, armer l’appareil; continu-
er d'utiliser les cartouches qui restent dans la bande-chargeur; une fois la ban-
de-chargeur utilisée, l'enlever et la mettre de côté de manière qu’elle ne puisse
être ni réutilisée, ni utilisée à mauvais escient.

17. Ne jamais réaliser une fixation à travers un trou existant, sauf lorsque cela est

recommandé par Hilti, comme p. ex. pour le DX-Kwik.

18. Toujours ranger l'appareil et les cartouches dans un container fermé à clé et dans

un lieu sûr lorsque vous ne les utilisez pas.

18. Ne pas réaliser de fixations dans une atmosphère explosive ou inflammable, sauf

si l'appareil est homologué pour cela.

19. Toujours bien respecter les directives d'utilisation.
20. Assurez-vous que personne ne se trouve derrière/dessous l'endroit où vous réali-

sez des fixations.

21. Ne pas démonter l'appareil lorsqu'il est chaud.
22. Ne jamais dépasser la cadence de tir recommandée (le nombre de tirs par heure)

car l’appareil risquerait de s’échauffer sinon.

Consignes générales:
23. Ne jamais refixer d'éléments de fixation.
24. Bien respecter les directives nationales en vigueur, en particulier les règlements

contre la prévention d'accidents.

Sécurité contre les transpercements et les ricochets:
De par son principe, le piston permet de diminuer la vitesse du clou et d'absorber tout
excès d'énergie éventuel dans l'appareil.

Sécurité d'appui:
La sécurité d'appui empêche le fonctionnement de l'appareil armé s'il n'est pas
appuyé contre un support dur. Le tir n'est possible que si la sécurité d'appui est bien
appuyée, c.-à-d. si la pression d'appui est de 110 N au minimum et si l'ensemble
canon a coulissé de 16 mm.

Précautions d'utilisation:

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

La non-osservanza delle seguenti norme può provocare danni all’utente.

Usare solo cartucce Hilti o cartucce di qualità equivalente

L'uso di cartucce di qualità inferiore negli attrezzi Hilti può provocare la formazione
di polveri incombuste che possono esplodere e causare gravi lesioni agli operatori e
alle persone vicine. Le cartucce devono almeno:

a) Avere conferma da parte del relativo produttore di aver superato positiva -

mente il collaudo conformemente alla norma UE EN 16264

AVVERTENZA:

l Tutti i propulsori per inchiodatrici hanno superato i test previsti da EN 16264.
l Le prove previste dalla norma EN 16264 consistono in test di sistema con

specifiche combinazioni tra propulsori e attrezzi, eseguiti da enti di certificazione.
La denominazione dell'attrezzo, il nome dell'ente certificatore e il numero del test di
sistema sono stampati sulla confezione del propulsore.

oppure

b) b) Il simbolo di conformità CE (obbligatorio nell'UE a partire dal mese di

luglio 2013)

Vedere campione della confezione all'indirizzo: www.hilti.com/dx-cartridges

!

Avvertenze:

1. Non utilizzare mai l’attrezzo senza prima aver frequentato l’apposito training.  Per

ogni genere di consigli rivolgeteVi al Vostro venditore di fiducia.

2. Utilizzate sempre l’attrezzo secondo le istruzioni per l’uso allegate all’attrezo.
3. Non puntate mai l’attrezzo contro Voi stessi o altre persone.
4. Non premete mai l’attrezzo contro la Vostra mano o altre parti del corpo.
5. L’operatore e le persone che si trovano nelle sue immediate vicinanze devono port-

are, durante l’utilizzo dell’inchiodatrice, occhiali e casco di protezione.

Consigli di sicurezza:

6.

Impiegare lo strumento solo in posti di lavoro ben aerati.

7. Utilizzate sempre, se possibile, lo stabilizzatore e il cappuccio di protezione.
8. Non lasciate mai l’attrezzo carico senza sorveglianza; scaricate sempre l’attrezzo

prima della manutenzione o pulizia dello stesso, alla fine del lavoro, prima di ogni
pausa di lavoro e prima della sostituzione di parti dell’inchiodatrice (guida pistone,
pistone, piastra base, ecc.)

9. L’utilizzatore e le persone nelle sue vicinanze devono proteggersi adeguatamente

gli occhi e portare un elmetto di sicurezza. Per l’uso in ambienti chiusi proteggere
l’udito.

10. Controllate sempre la perfetta funzionalità dell’inchiodatrice, prima di caricarlo.

Non caricate mai un attrezzo incompleto o mal funzionante.

11. Durante l’azionamento dell’attrezzo tenete le braccia piegate (non tese). Interrom-

pete il lavoro in caso di malessere.

12. Mantenete l’attrezzo sempre perpendicolare alla superficie di lavoro e al materiale

base.

13. Utilizzate sempre elementi di fissaggio, propulsori e parti di ricambio originali Hilti o

altri della stessa elevata qualità.

14. Non tentate di estrarre i propulsori dal nastro con la forza.
15. In caso di mancata accensione o di accensione difettosa, procedere sempre nel

seguente modo:

mantenere l’attrezzo contro la parete per 30 secondi

se il propulsore continuasse a non accendersi, allontanare l’inchiodatrice dalla
superficie di lavoro, badando a non puntarla contro se stessi o altre persone

Ricaricate l’attrezzo in modo da far avanzare il propulsore; finire di utilizzare il
nastro; eliminare il nastro vuoto facendo attenzione che non venga più erronea -
mente usato.

16. Non effettuare mai un fissaggio in un foro già esistente, se non dietro suggerimen-

to Hilti come per esempio con il DX Kwik.

17. Quando l’inchiodatrice e i propulsori non vengono usati riporli in luogo chiuso e

sicuro.

18.Non effettuare fissaggio o spari in ambienti esplosivi o infiammabili, a meno che

l’inchiodatrice non sia opportunamente omologata.

19. Seguire sempre le istruzioni per l’uso.
20. AssicurateVi sempre che dietro o sopra il luogo dove vengono effettuati fissaggi,

non ci sia nessuno.

21. Non smontate mai l’attrezzo quando é caldo.
22. Non superare mai la frequenza dei fissaggi consigliata (numero di fissaggi per ora)

in quanto l’attrezzo si surriscalda.

Note generali
23. Non riutilizzare mai gli elementi di fissaggio.
24. Rispettate sempre le normative nazionali in vigore, soprattutto per quanto riguarda

i regolamenti in materia di prevenzione infortunistica.

Sicurezza contro l’attraversamento e il rimbalzo
Il principio del pistone permette di diminuire la velocità del chiodo assorbendo eventu-
ali eccessi di energia all’interno dell’attrezzo stesso.

Sicurezza di pressione
Questa sicurezza impedisce il funzionamento dell’attrezzo quando non appoggia su
una superficie solida. L’accensione avviene solo quando la piastra base viene premuta
a fondo. La pressione d’appoggio dovrà essere di min. 160N e la piastra base dovrà
rientrare di 16 mm.

Norme di sicurezza per l’uso:

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

6

Bolzensetzgerät DX350 / DX350 fastening tool / Appareil de scellement DX350 / Inchiodatrice DX350 

Technische Daten:

Gewicht:

2,33 kg

Gerätelänge:

340 mm

Nagellänge:

max. 62 mm

Kartuschen:

6,8/11M rot, gelb, grün

Technical data

Weight:

2.33 kg (5.2 lbs)

Tool length:

340 mm (13

3

/

8

)

Nail length:

max. 62 mm (2

1

/

2

)

Cartridges:

6.8/11M red, yellow, green

Caractéristiques techniques:

Poids:

2,33 kg

Longueur de l’appareil:

340 mm

Longueur des clous:

62 mm max.

Cartouches:

6,8/11M rouges, jaunes, vertes

Dati tecnici:

Peso:

2,33 kg

Lunghezza attrezzo:

340 mm

Lunghezza chiodi:

max. 62 mm

Propulsori:

6,8/11M 

DX

 3

50

DX

 3

50

8

6

5

3

4

7

2

1

Ersatzteile:

Bestell-Bezeichnung

Artikel-Nr.

Standplatte 2/S13

2363/0

Federbügel *

2162/6

Bolzenführung 2/F3

2303/6

Kolben 2/DN1

2413/3

Kolbenführung

2167/5

Anschlag *

2179/0

Kugel 6 *

2181/6

Ringfeder

2180/8

* Ersatzteilpackung

2213/7

Spare parts

Designation

Item no.

Baseplate 2/S13

2363/0

Spring clip *

2162/6

Fastener guide 2/F3

2303/6

Piston 2/DN1

2413/3

Piston guide

2167/5

Stop *

2179/0

Ball 6 *

2181/6

Annular spring

2180/8

* Spares pack

2213/7

Pièces de rechange:

Référence

Code art.

Embase 2/S13

2363/0

Etrier ressort *

2162/6

Canon 2/F3

2303/6

Piston 2/DN1

2413/3

Guide-piston

2167/5

Butée *

2179/0

Bille 6 *

2181/6

Ressort annulaire

2180/8

* Sachet pièces rechange

2213/7

Parti di ricambio:

Indicazione d’ordine

No. art.

Piastra base 2/S13

2363/0

Staffa *

2162/6

Guida chiodo 2/F3

2303/6

Pistone 2/DN1

2413/3

Guida pistone

2167/5

Arresto *

2179/0

Sfera 6 *

2181/6

Anello penna

2180/8

* Conf. parti ricambio

2213/7

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

7

Technische Beschreibung:

Das Hilti DX350 ist ein Bolzensetzgerät zum Setzen von Nägeln (siehe Handbuch der
Befestigungstechnik). Das DX350 arbeitet nach dem bewährten Kolben prinzip und
gewährleistet damit optimale Arbeits- und Befestigungs sicherheit.
Wie für alle Bolzensetzgeräte gilt auch für das DX350, dass Gerät, Elemente- und Kar-
tuschenprogramm eine «technische Einheit» bilden. Das heisst, Sie werden nur dann
mit diesem System störungsfrei arbeiten können, wenn Sie die speziell dafür hergestell-
ten Hilti Befestigungselemente und Kartuschen oder andere, qualitativ gleichwertige
Produkte verwenden. Von Hilti ausgearbeitete Montage empfehlungen für eine Befesti-
gung haben nur unter dieser Voraus setzung Gültigkeit. Die empfohlene maximale Setz-
frequenz beträgt 500 Setzungen pro Stunde. Dieses Gerät ist nicht für Anwendungen in
explosionsgefährdeter Um gebung zugelassen.

Ersatzteile:
Die auf Seite 2 aufgeführten Ersatzteile (1-8) dürfen vom Benutzer ersetzt werden. Es
dürfen nur die in dieser Bedienungsanleitung aufgeführten Manipulationen (Demonta-
ge/Montage/Handhabung/Pflege und Wartung) ausgeführt werden. Weitere Manipula-
tionen können die Funktionssicherheit beeinträchtigen.

Technical description

The Hilti DX 350 is a powder-actuated tool designed for driving nails (see
Fastening Technology Manual). The DX 350 works on the well-proven piston
principle, thus providing an optimum of working and fastening safety.
As with all powder-actuated tools, the tool, magazine, fastener programme and
cartridge programme form a «technical unit». This means that troublefree
fastening with this system can only be assured if the fasteners and cartridges
specially manufactured for it, or products of equivalent quality, are used. The
fastening and application recommendations given by Hilti are only applicable if
this condition is observed. The recommended maximum fastening rate is 500
fastenings per hour. This tool is not approved for use under conditions where
there may be a risk of explosion.

Spare parts
The user/owner of the tool may replace the parts listed on page 2 (parts 1-8). Only the
procedures described in these operating instructions (disassembly/assembly/operati-
on/care and maintenance) should be used. Any other unauthorised manipu lations may
negatively affect functional safety of the tool.

Description technique:

L’appareil de scellement DX 350 Hilti permett de fixer des clous (voir Manuel des
Techniques de Fixation). Il est équipé d'un piston intermédiaire aux qualités éprouvées
qui lui confère une sécurité d'emploi optimale et permet des fixations sûres. 
Comme tous les autres appareils de scellement Hilti, le DX350 n'est qu'un élément du
système de fixation complet et homogène Hilti qui comprend non seulement l'appareil
mais aussi toute une gamme d'éléments et de cartouches. Ceci signifie que l'utilisa-
teur ne peut travailler sans problèmes avec ce système que s'il utilise les éléments de
fixation et les cartouches Hilti spécialement prévus à cet effet ou d'autres produits de
qualité équivalente. Les recomman dations données par Hilti concernant la mise en
place de ses fixations ne sont valables que dans ces conditions uniquement. La fré-
quence de tir maximale recommandée est de 500 tirs par heure. Cet appareil n’est
pas homologué pour des applications dans des ambiances déflagrantes.

Pièces de rechange:
Les pièces de rechange (1 à 8) indiquées page 2 peuvent être remplacées par l’utilisa-
teur. Seules sont autorisées les manipulations (démontage/remontage/ maniement/net-
toyage et entretien) indiquées dans le présent mode d’emploi. Toutes autres manipula-
tions risqueraient d’altérer la sécurité de fonctionnement de l’appareil.

Descrizione tecnica:

Le inchiodatrici DX350 sono attrezzi per fissaggi di chiodi (vedi manuale per la tecnica
del fissaggio). Le DX350 funzionano sull’ormai affermato principio del pistone garan-
tendo pertanto un’esecuzione di lavoro ottimale e affidabile.
Come per tutte le inchiodatrici Hilti DX, anche per le DX350, l’attrezzo, il caricatore, gli
elementi di fissaggio e i propulsori sono stati progettati come componenti reciproci di
uno stesso sistema. Questo significa che il fissaggio eseguito con questa inchiodatrice
é rapido accurato e affidabile, solo se utilizzerete propulsori ed elementi di fissaggio
prodotti appositamente da Hilti o altri dello stesso valore qualitativo. Le raccomanda-
zioni per il fissaggio fornite da Hilti sono valide solo se le condizioni qui di seguito
riportate vengono rispettate. La massima frequenza di posa consigliata è di ca 500
pose all’ora. Questo attrezzo non è omologato all’utilizzo in ambienti con pericolo di
esplosione.

Parti di ricambio:
Le parti di ricambio riportate a pagina 2 ( 1-8) possono essere sostituite dall’u tilizzatore.
L’utilizzatore può eseguire solo quelle operazioni (smon taggio / montaggio / manuten-
zione) riportate in questo manuale di istruzioni. Ulteriori operazioni possono essere ese-
guite solo da personale autorizzato.

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

8

Demontage / Disassembly / Démontage / Smontaggio

1

2

Ringfeder mit Schraubendreher oder
Nagel anheben und drehen. Anschlag
nach hinten ziehen und heraus -
nehmen.

Use a screwdriver or nail to lift and
rotate the annular spring. Pull back
and remove the stop.

Soulever le ressort annulaire avec un
tournevis ou un clou et le tourner. Tirer
la butée en arrière et l’enlever.

Girare e alzare la molla con l’aiuto di
un cacciavite o chiodo. Tirare indietro
ed estrarre l’arresto.

3

Einsatz herausziehen.

Pull out the assembly.

Sortir l’ens. canon.

Estrarre la carica.

4

Federbügel mit Schraubendreher oder
Nagel wegdrücken. Allenfalls beschä-
 digter Feder bügel auswechseln.

Use a screwdriver or nail to prise off
the spring clip. Replace the spring clip
if it is damaged or defective.

Appuyer sur l’étrier ressort avec un
tournevis ou un clou et l’enlever. Si
l’étrier ressort est abîmé, l’échanger.

Spostare con l’aiuto di un cacciavite o
chiodo la staffa. Sostituire sempre la
staffa se danneggiata.

5

6

Trennen der Standplatte inkl. Bolzen-
führung von der Kolbenführung und
Kolben heraus ziehen.

Separate the base plate and fastener
guide from the piston guide and pull
out the piston.

Séparer l’embase, canon compris, du
guide-piston. Enlever le piston.

Dividere la piastra base inclusa la gui-
da chiodo dalla guida pistone ed
estrare il pistone.

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

9

6

7

8

9

Bolzenführung in Standplatte einschie-
ben.

Slide the fastener guide into the base-
plate.

Enfoncer le canon dans l’embase.

Inserire la guida chiodo nella piastra
base.

Kolben bis zum Ende in Kolben -
führung einschieben.

Slide the piston into the piston guide
as far as it will go.

Enfoncer le piston à fond dans son
guide.

Inserire fino in fondo il pistone nella
sua guida.

Kolben führung in Standplatte ein-
schieben. Nuten für Anschlag müssen
über einstimmen.

Slide the piston guide into the base-
plate. The grooves for the stop must
be in alignment.

Enfoncer le guide-piston dans l’emba-
se. Les gorges pour la butée doivent
être alignées.

Inserare la guida pistone nella piastra
base. Le scanalature per l’arresto
devono coincidere.

Federbügel in Aussparung drücken.

Press the spring clip into the groove.

Enfoncer l’étrier ressort dans l’évide-
ment.

Inserire la staffa nella rientranza.

Montage / Assembly / Remontage / Montaggio

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

10

10

11

12

1

2

Einsatz in das Gerät so einführen,
dass die Nut mit der Anschlag öffnung
übereinstimmt.

Insert the complete assembly into the
tool so that the groove and the ope-
ning for the stop are in alignment.

Introduire l’ens. canon dans l’appareil
de telle sorte que la fente l’ouverture
de la butée.

Inserire la carica nell’attrezzo in modo
che la scanalatura coincida con l’aper-
tura del dispositivo di arresto.

Anschlag einsetzen und Ringfeder mit
Schraubendreher oder Nagel darüber -
ziehen.

Fit the stop and use a screwdriver or
nail to pull the annular spring over it
into place.

Introduire la butée et faire passer le
ressort annulaire dessus avec un tour-
nevis ou un clou.

Inserire l’arresto e sovrapporgli la
molla con l’aiuto di un cacciavite o chi-
odo.

Einsatz bis zum Anschlag ausziehen
und wieder zurückstossen (Repetier -
vorgang).

Pull out the assembly as far as it will
go and then push it back into the tool
(cocking / cycling action).

Imprimer un mouvement de va-et-
vient complet à l’ens. canon (arme m-
ent).

Estrare la carica fono al suo arresto e
rimandarla indietro (procedura ri petibi-
le).

Nagel einschieben, bis Rondelle in der
Bolzenführung gehalten wird.

Insert a nail. Push it in until the washer
is held in the fastener guide.

Enfoncer le clou jusqu’à ce que la ron-
delle tienne bien dans le canon.

Inserire il chiodo, fino a quando la ron-
della viene trattenuta nella guida.

Handhabung/Operation/Maniement/Manutenzione

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

11

3

4

5

Kartuschenmagazinstreifen einschie -
ben, bis mit der Griffunterseite bündig.

Insert a cartridge strip. Push the car-
tridge strip in until the end of the strip
is flush with the base of the grip.

Enfoncer à ras la bande-chargeur de
cartouches en-dessous de la poignée.

Inserire il nastro dei propulsori fino a
quando lo stesso non è alla pari con la
parte inferiore dell’impugnatura.

Gerät senkrecht auf Setzfläche an -
pressen und Abzug betätigen.

Hold the tool at right angles to the
material in which the fastener is to be
driven, press the muzzle against the
surface and pull the trigger.

Appuyer l’appareil bien perpendi cu -
lairement à la surface de tir et ac tion -
ner la détente.

Posizionare l’inchiodatrice perpendi -
colarmente alla superficie di lavoro e
azionare il grilletto.

Warnung!
Bolzenführung nie mit der Hand-
 fläche oder über die Nagelrondelle
zurückziehen; Verletzungsgefahr!

Caution!
Never use the palm of the hand to
push back the fastener guide and
never attempt to pull it back by way
of the nail/washer. This could pre-
sent a risk of injury to the operator!

Attention:
Ne jamais repousser le canon avec
la paume de la main ou par-dessus
la rondelle du clou pour éviter de se
blesser!

Attenzione!
Non spingere mai indietro la guida
pistone con il palmo della mano o
sopra la rondella del chiodo. Perico-
lo di lesioni!

Handhabung / Operation / Maniement / Manutenzione

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

12

1

2

3

4

5

Bolzenführung innen

Inner surfaces of the fastener guide

Intérieur du canon.

Interno guida chiodo

Kolben aussen.

Outer surfaces of the piston

Extérieur du piston.

Esterno pistone

Kolbenführung innen und aussen
sowie Kartuschenlager innen.

Inner and outer surfaces of the piston
guide and the inner surfaces of the
cartridge chamber

Intérieur et extérieur du guide-piston et
intérieur de la chambre à cartouches.

Interno ed esterno della guida pistone
come pure l’interno dell’alloggiamento
propulsori.

Gehäuse innen.

Inner surfaces of the housing

Intérieur du boîtier.

Interno carcasso

Pflege und Wartung / Cleaning and servicing / Nettoyage et entretien / Pulizia e manutenzione

Die folgenden Teile sind mit den mitgelieferten Reinigungsbürsten zu säubern.
The following parts must be cleaned using the brushes supplied.
Nettoyer les pièces ci-dessous à l’aide des brosses fournies avec l’appareil.
Le seguenti parti devono essere pulite con lo spazzolino fornito in dotazione.

Das Gerät sollte entweder einmal pro Woche oder nach jeder grösseren Anzahl gesetzter Befestigungselemente (ca. 5000 Befestigungen) gereinigt werden.
The tool should be cleaned once a week or after a large number of fasteners have been driven (approx. 5,000 fasteners).
L’appareil doit être nettoyé au moins une fois par semaine ou après un certain nombre de tirs (env. 5000 fixations).
L’attrezzo dovrebbe essere pulito almeno o una volta alla settimana o dopo ca. 5000 spari.

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

13

Störungen und Behebung

Auftretende Störung

Störungsbehebung

Zündversager:

Siehe Versagen einer Kartusche
(Seite 3 Punkt 14).

Wiederholte Zündversager:

Wartung durchführen

Leistung des Gerätes sinkt massiv:

Wartung durchführen und reinigen

Stark unterschiedliche Eintreibtiefen:

Repetiervorgang vollständig durch-
führen, d.h. den Einsatz ganz aus-
ziehen. Eventuell Standplatte und 
Kolben führung mit Hilti Spray einölen.

Schwerfälliger Repetiervorgang:

Kontrollieren Sie den Federbügel und
wechseln diesen bei starker Deformie-
rung aus. Ölen Sie die Kolbenführung
und Standplatte mit dem Hilti Spray.

Problemi e soluzioni

Tipo di guasto

Rimozione del guasto

Accensione a vuoto:

Vedi accensione a vuoto di un propul-
sore (pag. 6 punto 14).

Ripetizione accensione a vuoto:

Eseguire la manutenzione.

La prestazione dell’attrezzo cala

Eseguire la manutenzione e pulire

sensibilmente:

l’attrezzo.

Profondità di posa molto differenti:

Eseguire il procedimento di carica a 
fondo, cioè estrarre completamente la
carica. Eventualmente oliare la piastra
base e la guida pistone con lo spray 

Hilti.

Procedimento di carica lento, pesante:

Controllare la staffa e, se è molto
deformata, sostituirla. Oliare la piastra
base e la guida pistone con lo spray
Hilti.

Malfunctioning and remedies

Malfunction

Remedies

Misfire:

See "Cartridge misfire".
(See paragraph 14 on page 4).

Repeated misfires:

Service the tool.

Very significant drop in driving power:

Service the tool.

Widely varying depth of penetration:

Cycle the tool fully, i.e. pull out the
assembly all the way. It may be
necessary to lubricate the baseplate

and piston guide slightly using Hilti 

spray.

Stiff cycling action:

Inspect the spring clip and replace it if
it is badly deformed. Use Hilti spray to
lubricate the piston guide and base-
plate.

Anomalies et comment y remédier

Anomalies

Comment y remédier

Percussion ratée:

Voir percussion ratée 
(point 14, page 5).

Nouveau raté (percussion):

Réviser l’appareil.

Diminution brusque de la puissance:

Réviser l’appareil.

Clous enfencés très différemment:

Armer complètement l’appareil, c.-à-d.
sortir complètement l’ens. canon.
Huiler éventuellement l’embase et
le guide-piston avec du spray Hilti.

Difficultés d’armement:

Contrôler l’étrier ressort et l’échanger
s’il est très déformé. Huiler le guide-
piston et l’embase avec du spray Hilti.

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

14

Herstellergewährleistung Geräte

Hilti gewährleistet, dass das gelieferte Gerät frei von Material- und
Fertigungsfehler ist. Diese Gewährleis tung gilt unter der Voraussetzung,
dass das Gerät in Übereinstimmung mit der Hilti Bedienungsanleitung
richtig eingesetzt und gehandhabt, gepflegt und ge reinigt wird, und dass die
technische Einheit gewahrt wird, d.h. dass nur Original Hilti Verbrauchs -
material, Zubehör und Ersatzteile oder andere, qualitativ gleich wertige
Produkte mit dem Gerät verwendet werden.

Diese Gewährleistung umfasst die kostenlose Re  paratur  oder den kosten -
losen Ersatz der defekten Teile während der gesamten Lebensdauer des
Gerätes. Teile, die dem normalen Verschleiss unterliegen, fallen nicht unter
diese Gewährleistung.

Weitergehende Ansprüche sind ausgeschlossen, soweit nicht zwing -
ende nationale Vorschriften ent gegenstehen. Insbesondere haftet Hilti
nicht für unmittelbare oder mittelbare Mangel- oder Man gelfolge -
schäden, Verluste oder Kosten im Zusam menhang mit der Verwendung
oder wegen der Un möglichkeit der Verwendung des Gerätes für ir -
gendeinen Zweck. Stillschweigende Zusicherungen für Verwendung
oder Eignung für einen bestimmten Zweck werden ausdrücklich
ausgeschlossen.

Für Reparatur oder Ersatz sind Gerät oder betroffene Teile unverzüglich
nach Feststellung des Mangels an die zuständige Hilti Marktorganisation zu
senden.

Die vorliegende Gewährleistung umfasst sämtliche Gewährleistungs -
verpflichtungen seitens Hilti und er setzt alle früheren oder gleichzeitigen
Erklärungen, schriftlichen oder mündlichen Verabredungen betref fend
Gewährleistung.

Manufacturer's warranty - DX Tools

Hilti warrants that the tool supplied is free of defects in material and
workmanship. This warranty is valid so long as the tool is operated and
handled correctly, cleaned and serviced properly and in accordance with the
Hilti Operating Instructions, and the technical system is maintained. This
means that only original Hilti consumables, components and spare parts, or
other products of equivalent quality, may be used in the tool.

This warranty provides the free-of-charge repair or replacement of defective
parts only over the entire lifespan of the tool. Parts requiring repair or
replacement as a result of normal wear and tear are not covered by this
warranty.

Additional claims are excluded, unless stringent national rules prohibit
such exclusion. In particular, Hilti is not obligated for direct, indirect,
incidental or consequential damages, losses or expenses in connection
with, or by reason of, the use of, or inability to use the tool for any
purpose. Implied warranties of merchantability or fitness for a particular
purpose are specifically excluded.

For repair or replacement, send tool or related parts immediately upon
discovery of the defect to the address of the local Hilti marketing organization
provided.

This constitutes Hilti's entire obligation with regard to warranty and
supersedes all prior or contemporaneous comments and oral or written
agreements concerning warranties

.

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

15

Garanzia del costruttore per gli strumenti

Hilti garantisce che lo strumento fornito è esente da difetti di materiale e di
produzione. Questa garanzia è valida a condizione che lo strumento venga
correttamente utilizzato e manipolato in conformità al manuale d'istruzioni
Hilti, che venga curato e pulito e che l'unità tecnica venga salvaguardata, cioè
vengano utilizzati per lo strumento esclusivamente materiale di consumo,
accessori e ricambi originali Hilti oppure altri prodotti di pari qualità.

La garanzia si limita rigorosamente alla riparazione gratuita o alla sostituzione
delle parti difettose per l'intera durata dello strumento. Le parti sottoposte a
normale usura non rientrano nei termini della presente garanzia.

Si escludono ulteriori rivendicazioni, se non diversamente disposto da
vincolanti prescrizioni nazionali. In particolare Hilti non si assume alcuna
responsabilità per eventuali difetti o danni accidentali o consequenziali
diretti o indiretti, perdite o costi relativi alla possibilità/impossibilità
d'impiego dello strumento per qualsivoglia ragione. Si escludono
espres sa mente tacite garanzie per l'impiego o l'idoneità per un partico -
lare scopo.

Per riparazioni o sostituzioni dello strumento o di singoli componenti e subito
dopo aver rilevato qualsivoglia danno o difetto, è necessario contattare il
Servizio Clienti Hilti. Hilti Italia SpA provvederà al ritiro dello stesso, a mezzo
corriere.

Questi sono i soli ed unici obblighi in materia di garanzia che Hilti è tenuta a
rispettare; quanto sopra annulla e sostituisce tutte le dichiarazioni precedenti
e/o contemporanee alla presente, nonché altri accordi scritti e/o verbali
relativi alla garanzia.

Garantie constructeur des appareils

Hilti garantit l'appareil contre tout vice de matières et de fabrication. Cette
garantie s'applique à condition que l'appareil soit utilisé et manipulé, nettoyé
et entretenu correctement, en conformité avec le mode d'emploi Hilti, et que
l'intégrité technique soit préservée, c'est-à-dire sous réserve de l'utilisation
exclusive, conjointement avec l'appareil, de consommables, accessoires et
pièces de rechange d'origine Hilti ou autres produits de qualité équivalente.

Cette garantie se limite strictement à la réparation gratuite ou au remplace -
ment gracieux des pièces défectueuses pendant toute la durée de vie de
l'appareil. Elle ne couvre pas les pièces soumises à une usure normale.

Toutes autres revendications sont exclues pour autant que des disposi -
tions légales nationales impératives ne s'y opposent pas. En particulier,
Hilti ne saurait être tenu pour responsable de toutes détériorations,
pertes ou dépenses directes, indirectes, accidentelles ou consécutives,
en rapport avec l'utilisation ou dues à une incapacité à utiliser l'appareil
dans quelque but que ce soit. Hilti exclut en particulier les garanties
implicites concernant l'utilisation et l'aptitude dans un but bien précis.

Pour toute réparation ou tout échange, renvoyer l'appareil ou les pièces
concernées au réseau de vente Hilti compétent, sans délai, dès constatation
du défaut.

La présente garantie couvre toutes les obligations d'Hilti et annule et
remplace toutes les déclarations antérieures ou actuelles, de même que tous
accords oraux ou écrits concernant des garanties.

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01


background image

Hilti = registered trademark of Hilti Corp., Schaan   W 2101 0713 20-Pos. 1   1   Printed in Liechtenstein   © 2013
Right of technical and programme changes reserved   S. E. & O.

309899 / A2

Hilti Corporation 
FL-9494 Schaan
Tel.: +423 / 234 21 11
Fax: +423 / 234 29 65
www.hilti.com

Printed: 08.07.2013 | Doc-Nr: PUB / 5069819 / 000 / 01