Full Text Searchable PDF User Manual
X500
Expansion Unit with RAID Function
QUICK START GUIDE
Rugged Mobile Computing Solutions
1. Overview ······································································· 1
2. Software Installation ···················································· 2
Installing the Controller Driver ···································· 2
Installing Adaptec Storage Manager ··························· 2
3. Creating Arrays ····························································· 3
Using Adaptec Storage Manager to Create Arrays ····· 3
Using the ARC Utility to Create Arrays ························ 7
4. Notes and Hints ···························································· 8
1
1
.
Overview
This Expansion Unit, a housing attached to the bottom of X500, provides up to 5TB
extra storage space with RAID support. By default, the Expansion Unit comes with
three 1TB disk drives configured as RAID5.
You can easily swap a drive by loosening the screws to open the protection door
and then pulling the drive out of its slot.
The Expansion Unit features include:
Adaptec RAID 6805 controller
Hard disk drive slot x 5, with three drives pre-installed by default
Indicator LED x 5
Multiple options for creating and managing RAID arrays
RAID levels supported: RAID0, RAID1, RAID1E, RAID 5, RAID 5EE, RAID 6, and
RAID 10
Power-management of disk drives
Audible alarm
I/O statistics logging
Disk drive hot-swapping
Five indicator LEDs for five physical drives
Three drives
at the front
Two drives at the
back (optional)
2
2
.
Software Installation
Installing the Controller Driver
1.
Start Windows.
The Found New Hardware Wizard opens and searches for the driver.
2.
Insert X500 Driver Disc in the DVD drive. Select
Locate and Install Driver
Software....
and
Don’t Search Online
.
3.
Browse to the driver location as below and click
OK
.
\Option DRV\Raid_6805\Driver\windows-ws08-7-vist
4.
When the Adaptec driver is found, click
Next
.
5.
Follow the on-screen instructions to complete the installation.
6.
Continue with Adaptec Storage Manager installation.
Installing Adaptec Storage Manager
NOTE:
You need administrator or root privileges to install Adaptec Storage
Manager.
1.
Insert X500 Driver Disc in the DVD drive.
2.
Browse to one of the below folders depending on your OS version.
For 64-bit OS:
\Option DRV\Raid_6805\AP\amd64\manager
For 32-bit OS:
\Option DRV\Raid_6805\AP\i386\manager
3.
Run the Setup program for the OS as described below.
For 64-bit OS:
setup_asm_x64.exe
For 32-bit OS:
setup_asm_x86.exe
4.
Click
Next
to begin the installation, click
I accept...
, then click
Next
.
5.
Select
GUI and Agent
. Then click
Next
.
3
3
.
Creating Arrays
NOTE:
This document provides only basic information. It is assumed that you are
an advanced user familiar with RAID.
You can create arrays using either Adaptec Storage Manager or ARC Utility.
Using Adaptec Storage Manager to Create Arrays
Adaptec Storage Manager is a software application that helps you build a storage
space for your data. You can group disk drives into logical drives and build in
redundancy to protect your data and improve system performance. With Adaptec
Storage Manager, you can also monitor and maintain the controller and disk
drives.
NOTE:
If your system includes a firewall, you must unblock these ports: 8003 (TCP),
34580 (TCP), 34570 to 34579 (TCP), 34570 (UDP), and 34577 to 34580 (UDP).
To create arrays using this tool:
1.
In Windows, click
Start
Adaptec Storage Manager
.
2.
Expand
Direct Attached Storage
and select the local system.
3.
The Log In window opens. Enter the Administrator password and click
Connect
.
4
4.
Double-click
Controller 1 RAID controller Adaptec 6805
.
5.
The physical drives are shown on the screen. Click
Create
on the toolbar.
5
6.
The wizard screen appears, offering two configuration methods:
Express
configuration
and
Custom configuration
.
Use the express method when you want to use all available disk drives in the
most efficient manner. Use the custom method when you want to create
specific logical drives with any or all available disk drives and configure
advanced settings manually.
Click
Next
after selecting a method.
7.
Configure the settings if you selected
Custom configuration
in the previous
step.
8.
Review the information that is displayed. Click
Apply
and then
Yes
.
6
9.
Adaptec Storage Manager builds the logical drive(s), indicated by a magnifying
glass moving across the new logical drive icon in the Logical Devices View.
The building process takes at least 4 hours. The magnifying disappears once
the logical drive has been created.
10.
The logical drives you create appear as physical disk drives on your operating
system. You must partition and format these logical drives before you can use
them to store data.
Refer to your operating system documentation for information on partitioning
and formatting.
NOTE:
Adaptec Storage Manager online Help includes conceptual information as well
as step-by-step instructions for completing tasks. To open the online Help, click
the Help button (shown at right).
In addition to the online Help, you can refer to the
Adaptec Storage Manager
User’s Guide
(in the
\User Manual\Raid_6805
folder of X500 Driver Disc) for
comprehensive and detailed information.
7
Using the ARC Utility to Create Arrays
The Adaptec RAID Configuration (ARC) utility is a BIOS-based utility that you can
use to create arrays and manage controllers, disk drives and other devices. The
utility is primarily intended for preoperating system installation configuration.
The utility comprises these tools:
Array Configuration Utility
(ACU) – For creating and managing arrays, and
initializing and rescanning disk drives.
SerialSelect
– For modifying your controller and disk drive settings.
Disk Utilities
– For formatting or verifying disk drives.
To create arrays using this tool:
1.
Run the BIOS Setup program of your X500. Make sure that the “Boot-time
Diagnostic Screen” item in the “Advanced” menu is enabled.
2.
Start your computer.
When you see the message “Press <Ctrl><A> for Adaptec RAID Configuration
Utility,” press
Ctrl
+
A
.
3.
Select
Array Configuration Utility
, then press
Enter
.
4.
Select
Initialize Drives
if needed.
5.
Select
Create Arrays
.
6.
Disk drives that can be used in a new array are available for selection.
Use the up or down arrow key to highlight a physical drive and press
Ins
to
select the drive for the array. Repeat with other physical drives. Press
Enter
.
7.
Use the Array Properties menu to modify the array’s RAID level, size, name,
stripe size, cache settings, and maxCache settings.
8.
Reboot the computer. You can then run Adaptec Storage Manager to check
the array building process. The process takes at least 4 hours.
9.
Partition and format your logical drives.
Refer to your operating system documentation for information on partitioning
and formatting.
NOTE:
For complete information on the ARC utility, refer to the
Installation and
User’s Guide
for the RAID controller (in the
\User Manual\Raid_6805
folder of
X500 Driver Disc).
8
4
.
Notes and Hints
You can use only the hard disk drive model tested and approved by Getac for
this Expansion Unit.
Each time the system is powered on, X500 has to initialize the Expansion Unit
before starting the OS. The initialization takes about 1 minute. Also, it takes
about 1 minute for X500 with the Expansion Unit to wake up from S3 (Sleep) or
S4 (Hibernation) state.
When you want to delete an existing RAID, use the ARC utility instead of
Adaptec Storage Manager.
When you log in to Adaptec Storage Manager, your permission level is
identical to your operating system permission level. For example, if you have
Administrator permissions on your operating system, you also have
Administrator permissions in Adaptec Storage Manager.
If you want to know the location of a physical drive, start Adaptec Storage
Manager, right-click the drive and click
Blink physical drive
in the popup
menu. The LED of the chosen drive will blink.
When there is an error with a drive, the system beeps. To stop the beeping,
start Adaptec Storage Manager and click
Silence
on the toolbar.
5 6 1 5 1 2 8 0 0 0 0 7 R 0 0